Document 422-1 Chip Inductors - 0402AF Series (1005) * Higher inductance values than other 0402 inductors * Ferrite construction for high current handling * 23 inductance values from 20 nH to 560 nH Part number1 Inductance2 5% (nH) 0402AF-200XJL_ 0402AF-220XJL_ 0402AF-330XJL_ 0402AF-360XJL_ 0402AF-390XJL_ 0402AF-510XJL_ 0402AF-560XJL_ 0402AF-720XJL_ 0402AF-780XJL_ 0402AF-101XJL_ 0402AF-141XJL_ 0402AF-181XJL_ 0402AF-201XJL_ 0402AF-221XJL_ 0402AF-251XJL_ 0402AF-271XJL_ 0402AF-301XJL_ 0402AF-331XJL_ 0402AF-361XJL_ 0402AF-391XJL_ 0402AF-421XJL_ 0402AF-471XJL_ 0402AF-561XJL_ 20 22 33 36 39 51 56 72 78 100 140 180 200 220 250 270 300 330 360 390 420 470 560 Impedance typ (Ohms) 900 MHz 1.7 GHz 83 96 142 157 173 218 239 311 344 513 629 832 1110 1050 1230 1320 1550 1850 1920 2350 2270 2680 3620 118 146 207 249 263 330 360 453 522 850 949 1270 1890 1560 1940 1960 2230 2880 2640 2970 2800 3010 3110 SRF typ3 (MHz) DCR max4 (Ohms) Irms5 (mA) 2600 2500 2300 2300 2200 1930 1900 1650 1600 1400 1220 1150 1000 1150 900 860 860 820 810 760 700 650 600 0.050 0.065 0.060 0.075 0.115 0.070 0.095 0.100 0.130 0.160 0.260 0.280 0.440 0.530 0.360 0.550 0.410 0.560 0.575 0.750 0.700 0.730 0.920 1600 1300 1400 1300 830 1100 1000 1000 970 900 630 560 400 380 520 360 420 350 360 300 340 310 200 1. When ordering, please specify termination and packaging codes: Designer's Kit C397 contains 20 each of all values 0402AF-561XJLW Termination: L = RoHS compliant gold over nickel over silver-palladium-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7 machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Q = 7 machine-ready reel. EIA-481 punched paper tape (5000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP 4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces. 3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMDD test fixture. 4. DCR measured on Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 5. Current that causes a 15C temperature rise from 25C ambient. Because of their open construction, these parts will not saturate. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Core material Ferrite Terminations RoHS compliant gold over nickel over silver-palladiumglass frit. Other terminations available at additional cost. Weight 0.9 - 1.1 mg Ambient temperature -40C to +85C with Irms current, +85C to +100C with derated current Storage temperature Component: -40C to +100C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 or 5000 per 7 reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 422-1 Revised 12/17/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 422-2 Chip Inductors - 0402AF Series Typical Q vs Frequency Typical L vs Frequency 1000 16 560 nH 14 270 nH 560 nH 100 nH 56 nH Q Factor Inductance (nH) 12 100 nH 100 20 nH 10 56 nH 10 20 nH 8 270 nH 6 4 2 0.001 0.01 0.1 1 Frequency (GHz) 0 10 Typical Impedance vs Frequency 1 100 Irms Derating 120 10000 110 560 nH 20 nH 100 10 1 100 Percent of rated Irms 270 nH 100 nH 56 nH 1000 Impedance (Ohms) 10 Frequency (MHz) 90 80 70 60 50 40 30 25C 1 20 10 0.1 0 0.001 0.01 0.1 1 Frequency (GHz) B overall C -40 -20 0 20 40 60 80 100 120 Ambient temperature (C) H Pick and place material E 10 F A G E D terminal F Terminal wraparound: approx 0.007/0,18 both ends A max B max C max D E F Recommended Land Pattern G H 0.044 0.026 0.026 0.020 0.009 0.017 0.018 0.026 inches 1,12 0,66 0,66 0,43 0,46 0,51 0,23 0,66 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 422-2 Revised 12/17/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.