Document Number: 31023
Revision 03-Nov-05
www.vishay.com
50
ERL
Vishay Dale
For Technical Questions, contact ff2bresistors@vishay.com
Metal Film Resistors, Military/Established Reliability,
MIL-PRF-39017 Qualified, Type RLR
FEATURES
• Meets requirements of MIL-PRF-39017.
• Failure Rate: Verified Failure Rate (Contact factory for
current level).
• Excellent high frequency performance.
• Epoxy coated construction provides superior moisture
protection.
• Traceability of materials and processing.
• Monthly lot acceptance testing.
• Very low noise.
• Extensive stocking program at distributors and factory in
± 1% and ± 2% tolerances.
• Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements.
VISHAY
DALE
MODEL
ERL05
ERL07
ERL20
ERL32
DSCC VISHAY POWER RATING RESISTANCE RESISTANCE TEMPERATURE MAXIMUM
DRAWING DALE P70°C RANGE TOLERANCE COEFFICIENT WORKING
NUMBER MODEL W Ω% ppm/°C VOLTAGE
98020 ERL05..36, ERL05..37* 0.125 1M1 - 22M ± 2, ± 5, ± 10 350 200
99011 ERL07..100, ERL07..101* 0.25 11M - 22M ± 2, ± 5, ± 10 350 250
98021 ERL20..36, ERL20..37* 0.50 3M3 - 22M ± 2, ± 5, ± 10 350 350
98022 ERL32..36, ERL32..37* 1.0 3M0 - 22M ± 2, ± 5, ± 10 350 350
97004 ERL62..1, ERL62..2* 2.0 10R - 2M7 ± 1, ± 2, ± 5, ± 10 100 500
3M0-22M 350
These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/ListDwgs.asp?DocType=DSCCdwg
*Hot solder dipped leads
RESISTANCE
RANGE1)
Ω
4R7 - 1M0
1R0 - 10M
4R3 - 3M01
1R0 - 2M7
MAXIMUM
WORKING
VOLTAGE
200
250
350
500
MAXIMUM
WEIGHT
(Grams)
0.11
0.35
0.75
1.50
TEMPERATURE
COEFFICIENT
ppm/°C
100
100
100
100
MIL-PRF-39017
STYLE
RLR05
RLR07
RLR20
RLR32
PARAMETER UNIT CONDITION
Voltage Coefficient, max. ppm/°C 5/Volt when measured between 10% and full rated voltage
Dielectric Strength VAC RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000
Insulation Resistance Ω ≥ 109 minimum dry; ≥ 1011 minimum after moisture test
Operating Temperature Range °C - 65 / + 150
Terminal Strength lb 2lb pull test on RLR05; 5lb pull test on all other sizes
Solderability Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208
TECHNICAL SPECIFICATIONS
RESISTANCE
TOLERANCE
%
± 1, ± 2
± 1, ± 2
± 1, ± 2
± 1, ± 2
STANDARD ELECTRICAL SPECIFICATIONS
1) Extended Resistance Range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by
the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows:
MIL STYLE LEAD MATERIAL PACKAGING SPECIAL
V
RESISTANCE
ALUE
TOLERANCE
CODE
FAILURE
RATE
RLR05 C = Solderable/ 3 digit significant F = ± 1% M = 1.0%/1000h B14 = Tin/Lead, Bulk Blank = Standard
RLR07 Weldable figure, followed G = ± 2% P = 0.1%/1000h R36 = Tin/Lead, T/R (Full; except 32’s) ( Da sh N um b er )
RLR20 by a multiplier R = 0.01%/1000h R64 = Tin/Lead, T/R (Full; 32’s only) (u p to 3 digi t s)
RLR32 1R00 = 1.0ΩS = 0.001%/1000h RE6 = Tin/Lead, T/R (1000 pcs) From 1-999
3302 = 33KΩas applicable
1005 = 10MΩ1 = Hot Solder Dip (32’s)
11 = Hot Solder Dip (20’s)
19 = Hot Solder Dip (05’s)
23 = Hot Solder Dip (07’s)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format)
RLR07C3 00 1FRR3 6
Historical Part Number example: RLR07C3001FR (will continue to be accepted)
RLR07 C 3001 F R R36
MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING
POWER
RATING
P70°C, W
0.125
0.25
0.50
1.0
www.vishay.com
51
ERL
Vishay Dale
Document Number: 31023
Revision 03-Nov-05
For Technical Questions, contact ff2bresistors@vishay.com
MODEL
ERL05
ERL07
ERL20
ERL32
ERL62
B
D
C
Max.
EA
DIMENSIONS in inches [millimeters]
A
0.150 ± 0.020
[3.81 ± 0.51]
0.250 + 0.031 - 0.046
[6.35 + 0.79 - 1.17]
0.375 ± 0.041
[9.53 ± 1.04]
0.562 ± 0.031
[14.27 ± 0.79]
0.562 + 0.031 - 0.042
[14.27 + 0.79 - 1.07]
E
1.25 ± 0.266
[31.75 ± 6.76]
1.50 ± 0.125
[38.10 ± 3.18]
1.50 ± 0.125
[38.10 ± 3.18]
1.50 ± 0.125
[38.10 ± 3.18]
1.50 ± 0.125
[38.10 ± 3.18]
B
0.066 ± 0.008
[1.68 ± 0.21]
0.090 ± 0.008
[2.29 ± 0.21]
0.138 ± 0.023
[3.51 ± 0.58]
0.190 ± 0.015
[4.83 ± 0.38]
0.230 ± 0.015
[5.84 ± 0.38]
C (Max.)
0.187
[4.75]
0.300
[7.62]
0.450
[11.43]
0.625
[15.87]
0.650
[16.51]
D
0.016 ± 0.002
[0.41 ± 0.05]
0.025 ± 0.002
[0.64 ± 0.05]
0.032 ± 0.002
[0.81 ± 0.05]
0.032 + 0.002 - 0.001
[0.81 + 0.05 - 0.03]
0.032 + 0.002 - 0.001
[0.81 + 0.05 - 0.03]
Documentation: Qualification and failure rate verification
test data is maintained by Vishay Dale and is available
upon request. Lot traceability and identification data is
maintained by Vishay Dale for five years.
MARKING
— Per MIL-PRF-39017
APPLICABLE MIL-SPECIFICATIONS
MIL-PRF-39017:
The ERL series meets the electrical, environmental and
dimensional requirements of MIL-PRF-39017.
MIL-PRF-22684:
MIL-PRF-39017 supercedes MIL-PRF-22684 on new
designs. The ERC series meet or exceed MIL-PRF-22684
requirements.
POWER RATING
Power ratings are based on the following two conditions:
1. ± 2.0% maximum ∆R in 2000 hours load life.
2. + 150°C maximum operating temperature.
Metal Film Resistors, Military/Established Reliability
-65 -50 -25 0 25 50 75 100 125 150 175 200
AMBIENT TEMPERATURE IN ˚C
DERATING
RATED POWER IN %
Element: Vacuum-deposited nickel-chrome alloy Encapsulation: Specially formulated epoxy compound
Standard lead material is solder-coated copper
Core: Fire-cleaned high purity ceramic Termination: Solderable and weldable per
MIL-STD-1276, Type C.
MATERIAL SPECIFICATIONS
70
* 1.08 ± 0.125 [27.43 ± 3.18] IF TAPE AND REEL
0
20
40
60
80
100
120
VISHAY DALE
