ERL Vishay Dale Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR FEATURES * Meets requirements of MIL-PRF-39017. * Failure Rate: Verified Failure Rate (Contact factory for current level). * Excellent high frequency performance. * Epoxy coated construction provides superior moisture protection. * Traceability of materials and processing. * Monthly lot acceptance testing. * Very low noise. * Extensive stocking program at distributors and factory in 1% and 2% tolerances. * Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements. STANDARD ELECTRICAL SPECIFICATIONS POWER RESISTANCE TEMPERATURE VISHAY MIL-PRF-39017 RESISTANCE MAXIMUM MAXIMUM RATING RANGE1) COEFFICIENT DALE TOLERANCE STYLE WORKING WEIGHT ppm/C P70C, W MODEL % VOLTAGE (Grams) 0.125 4R7 - 1M0 100 ERL05 1, 2 RLR05 200 0.11 0.25 1R0 - 10M 100 ERL07 1, 2 RLR07 250 0.35 0.50 4R3 - 3M01 100 ERL20 1, 2 RLR20 350 0.75 1.0 1R0 - 2M7 100 ERL32 1, 2 RLR32 500 1.50 1) Extended Resistance Range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows: DSCC DRAWING NUMBER 98020 99011 98021 98022 VISHAY DALE MODEL ERL05..36, ERL05..37* ERL07..100, ERL07..101* ERL20..36, ERL20..37* ERL32..36, ERL32..37* POWER RATING P70C W 0.125 0.25 0.50 1.0 RESISTANCE RESISTANCE TEMPERATURE RANGE TOLERANCE COEFFICIENT % ppm/C 1M1 - 22M 2, 5, 10 350 11M - 22M 2, 5, 10 350 3M3 - 22M 2, 5, 10 350 3M0 - 22M 2, 5, 10 350 10R - 2M7 100 97004 ERL62..1, ERL62..2* 2.0 1, 2, 5, 10 3M0-22M 350 These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/ListDwgs.asp?DocType=DSCCdwg *Hot solder dipped leads MAXIMUM WORKING VOLTAGE 200 250 350 350 500 TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient, max. Dielectric Strength Insulation Resistance Operating Temperature Range Terminal Strength Solderability UNIT ppm/C VAC C lb CONDITION 5/Volt when measured between 10% and full rated voltage RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000 109 minimum dry; 1011 minimum after moisture test - 65 / + 150 2lb pull test on RLR05; 5lb pull test on all other sizes Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format) R L R 0 MIL STYLE LEAD MATERIAL RLR05 RLR07 RLR20 RLR32 C = Solderable/ Weldable 7 C 3 0 0 RESISTANCE TOLERANCE VALUE CODE 3 digit significant F = 1% figure, followed G = 2% by a multiplier 1R00 = 1.0 3302 = 33K 1005 = 10M 1 F R R 3 6 FAILURE PACKAGING RATE M = 1.0%/1000h B14 = Tin/Lead, Bulk P = 0.1%/1000h R36 =Tin/Lead,T/R (Full; except 32's) R = 0.01%/1000h R64 = Tin/Lead, T/R (Full; 32's only) S = 0.001%/1000h RE6 = Tin/Lead, T/R (1000 pcs) Historical Part Number example: RLR07C3001FR (will continue to be accepted) SPECIAL Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable 1 = Hot Solder Dip (32's) 11 = Hot Solder Dip (20's) 19 = Hot Solder Dip (05's) 23 = Hot Solder Dip (07's) RLR07 C 3001 F R R36 MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING www.vishay.com 50 For Technical Questions, contact ff2bresistors@vishay.com Document Number: 31023 Revision 03-Nov-05 ERL Vishay Dale Metal Film Resistors, Military/Established Reliability DIMENSIONS in inches [millimeters] A E D C Max. B * 1.08 0.125 [27.43 3.18] IF TAPE AND REEL VISHAY DALE MODEL ERL05 ERL07 ERL20 ERL32 ERL62 A B C (Max.) D E 0.150 0.020 [3.81 0.51] 0.250 + 0.031 - 0.046 [6.35 + 0.79 - 1.17] 0.375 0.041 [9.53 1.04] 0.562 0.031 [14.27 0.79] 0.562 + 0.031 - 0.042 [14.27 + 0.79 - 1.07] 0.066 0.008 [1.68 0.21] 0.090 0.008 [2.29 0.21] 0.138 0.023 [3.51 0.58] 0.190 0.015 [4.83 0.38] 0.230 0.015 [5.84 0.38] 0.187 [4.75] 0.300 [7.62] 0.450 [11.43] 0.625 [15.87] 0.650 [16.51] 0.016 0.002 [0.41 0.05] 0.025 0.002 [0.64 0.05] 0.032 0.002 [0.81 0.05] 0.032 + 0.002 - 0.001 [0.81 + 0.05 - 0.03] 0.032 + 0.002 - 0.001 [0.81 + 0.05 - 0.03] 1.25 0.266 [31.75 6.76] 1.50 0.125 [38.10 3.18] 1.50 0.125 [38.10 3.18] 1.50 0.125 [38.10 3.18] 1.50 0.125 [38.10 3.18] MATERIAL SPECIFICATIONS Element: Vacuum-deposited nickel-chrome alloy Encapsulation: Specially formulated epoxy compound Core: Fire-cleaned high purity ceramic Termination: Standard lead material is solder-coated copper Solderable and weldable per MIL-STD-1276, Type C. POWER RATING APPLICABLE MIL-SPECIFICATIONS Power ratings are based on the following two conditions: MIL-PRF-39017: 1. 2.0% maximum R in 2000 hours load life. MIL-PRF-22684: 2. + 150C maximum operating temperature. 120 RATED POWER IN % The ERL series meets the electrical, environmental and dimensional requirements of MIL-PRF-39017. 100 MIL-PRF-39017 supercedes MIL-PRF-22684 on new designs. The ERC series meet or exceed MIL-PRF-22684 requirements. Documentation: Qualification and failure rate verification test data is maintained by Vishay Dale and is available upon request. Lot traceability and identification data is maintained by Vishay Dale for five years. 80 60 40 20 0 -65 -50 -25 0 25 50 75 70 100 125 150 175 200 AMBIENT TEMPERATURE IN C DERATING MARKING -- Per MIL-PRF-39017 Document Number: 31023 Revision 03-Nov-05 For Technical Questions, contact ff2bresistors@vishay.com www.vishay.com 51