PL-700SM-N SERIES
Plasc Shell Auto-Coupling Connectors
27 pole capacity circular shell connectors
PL-700SM-N FEATURES
Compact and configurable, the PL-700SM-N Series connector is Amphenol
Alden’s most versatile offering in a sub .700” diameter package. PL-700SM-N
Series connectors attach to a cable with a Press & SealTM backshell that provides
the refined look and performance of an overmolded product.
Packaging (intuitive, compact, configurable)
Pulse-Lok® auto-latch / mating confirmation
Miniature .700” diameter circular shell
Up to 27 contact positions
16 standard color combinations
Multiple and proprietary keying options
Available as an overmolded cable assembly
Custom configurations available
Performance (for harsh environments)
Water proof (IP-67 rated)
Steam, EtO, & Gamma sterilizable
Chemical resistant housing
Up to 5,000 mating cycles (with std.Contacts)
Factory terminated, overmolded cable
assemblies for enhanced flex and strain relief
Electrical (see below)
Mating Life: 5,000 cycles min.
Contact Resistance: < 10 milliohms*
Material
Connector Housing: Thermoplastic
Flex Reliefs: Thermoplastic Rubber
Contacts: Brass / BeCu,
Gold Plate per MIL-G-45204
Reusable Socket = 30-45µ” Gold over
50-200µ” Nickel strike
Disposable Pin = 10-30µ” Gold over
50-200µ” Nickel strike
Mechanical
Mating Cycles: 5K cycles max
Retention Force:
Mated Connectors: 25 lbs. Minimum
Cable to Connector: 35 lbs. Typical
Backshell to Connector: 45 lbs. Minimum
Housing Styles (Page 2)
Plug: In-Line
Receptacles: Front & Rear Panel-Mount
Receptacles: In-Line
Environmental
Operating Temp: -20C to +105C**
Moisture Resistance: to IP-67 (encapsulated)
Sterilizable: gamma, EtO & Autoclave
Chem. Resistance: common OR cleaning solvents
* post conditioning
**Dependent on overmold material
STANDARD CONTACT CONFIGURATIONS & SPECFICATIONS
TABLE A:
Custom contact inserts are available. Consult factory.
For additional information about this, or any other Amphenol Alden product, please contact
an Amphenol Alden specialist today.
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com 1
SPECIFICATIONS
Up to 27 Contact
Positions
Standard Hybrid Circuit Arrangements
Coaxial & Custom Circuits Available
Number of
Poles
Contact Size
Pin φ (mm)
Max Wire
Gauge
Operating
Voltage Max
Operating
Current Max
(A)
Contact
Resistance
(ohms)
27 0.5 26 300 V RMS 0.5 <14m
24 0.5 26 300 V RMS 0.5 <14m
18 0.5 26 300 V RMS 0.9 <14m
14 0.7 22 300 V RMS 0.9 <6m
12 0.7 22 300 V RMS 1.2 <6m
10 0.7 22 300 V RMS 2.0 <6m
7 0.7 22 300 V RMS 2.1 <6m
6 0.7 22 300 V RMS 2.1 <6m
5 0.7 22 300 V RMS 2.4 <6m
4 0.7 22 300 V RMS 2.4 <6m
2+2 2(1.5)-2(0.7) 2(16)-2(22) 300 V RMS 7.0/3.0 <6m
3 0.7 22 300 V RMS 3.0 <6m
2 0.7 22 300 V RMS 3.0 <6m
2 1.5 16 300 V RMS 13.0 <2m
1 0.7 22 300 V RMS 3.0 <6m
1 2.3 12 300 V RMS 15.0 <2m
Front Panel-Mount
Receptacle Assembly
In-Line Receptacle Kit In-Line Plug Assembly
.720φ
1.54
In-Line Receptacle Kit
(w/ optional Press & SealTM Backshell)
2.20
Front Panel-Mount Receptacle
(w/ Dust Cover)
In-Line Plug Kit
(w/ optional Press & SealTM Backshell)
.720φ
Panel thickness range to 0.187
Select this component from Table B
Select this component from Table B
Select Press & SealTH Backshell from Table C Select this component from Table B
1.60
Mounted
Height = 0.320
.90
.70φ
1.04
STANDARD HOUSING OPTIONS
PL-700SM-N SERIES
Plasc Shell Auto-Coupling Connectors 27 pole capacity circular shell connectors
In-Line Receptacles Panel-Mount Receptacles In-Line Plugs
STANDARD PART NUMBERS
TABLE B:
Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Amphenol Alden connector configurator located at www.amphenolalden.com/configurator
Options Include:
Housing Color Options Black & Gray
Mating Key Options 2 Standard Keys, Proprietary Keys Available
Panel-Mount Thickness Options Up to .125 Standard
For additional information about this, or any other Amphenol Alden product, please contact
an Amphenol Alden specialist today.
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com 2
Select this component from Table B
*Press & SealTM contacts, crimp or solder
termination
Rear Panel-Mount Receptacle
Select this component from Table B
Select this component from Table B
.815φ .89
Number of
Poles
In-Line
Receptacle
Front Panel-Mount
Receptacle FPM Receptacle
(w/ Dust Cap)
Rear Panel-Mount
Receptacle In-Line Plug In-Line Plug
(Breakaway)
Solder Cup Solder Cup PCB Solder Cup Solder Cup PCB Solder Cup Solder Cup
27 300322 300196 330196 301589 301365 331196 300112 301784
24 301270 301004 330336 301575 301351 331336 300850 301778
18 301242 300990 330322 301561 301337 331322 300822 301772
14 300294 300182 330182 301547 301323 331182 300084 301766
12 301214 300976 330308 301533 301309 331308 300794 301760
10 301186 300962 330294 301519 300697 331294 300766 301754
7 300266* 300168* 330168* 301505* 300683* 331168* 300056* 301748*
6 301158* 300948* 330280* 301471* 300669* 331280* 300738* 301742*
5 301130* 300934* 330266* 301477* 300655* 331266* 300710* 301736*
4 301102* 300920* 330252* 301449* 300627* 331252* 300482* 301730*
2(16)+2(22) 300238* 300154* 301463* 300641* 300028* 301724*
3 300543* 300529* 330238* 301603* 301379* 331238* 300501* 301718*
2 (22) 301046* 300892* 330224* 301421* 300599* 331224* 300428* 301712*
2 (16) 301074* 300906* 301435* 300613* 300500* 301706*
1 (22) 301018* 300878* 330210* 301497* 300585* 331210* 300400* 301700*
1 (12) 300210* 300140* 301393* 300571* 300000* 301790*
Note: Standard color configuration is black on black.
See our online configurator for more color options at:
www.amphenolalden.com/configurator
CONNECTOR TERMINATION OPTIONS
Solder Cup (Available for All)
For additional information about this, or any other Amphenol Alden product, please contact
an Amphenol Alden specialist today.
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com 3
Tiered solder cups
provide easy access to
center positions. Canted
cups facilitate quick and
easy wire positioning.
Standard on 10-27 pole
configurations
ACCESSORIES
Plug Soaking Cap
Plug Backshell
Contact Termination
Press & SealTM Features & Benefits
Contacts provide IP-67 watertight seal when
inserted into insulator
Easy crimp & poke installation
Excellent contact retention
Contacts may be crimped or soldered
Press & SealTM Contact System
Available on 1 to 7-Pole Configurations
Accepts multiple wire gauges 12, 16, 22 AWG
Features & Benefits
Available in most pole counts
from 1 to 27 Poles
PCB stand-offs ensure proper
positioning
Convenient packaging high
temperature contect cures may
be soldered to PCB and snapped
into panel-mounted receptacle
housing later
Panel-Mount, Cut-Out Template
.625φ
.560
.70 φ mounng
Flange Footprint
(.75φ for RPM
spanner nut)
Applies to both Front & Rear
Panel-Mount Receptacles
The PL-700 plug housing is designed to accept
Amphenol Alden’s one piece, Press & Seal PVC
Backshell. This unique backshell simply snaps into
place providing an IP-67 rated seal to the plug
housing and cable exit without hardware resulting in a
clean overmolded look. For optimum sealing we
suggest selecting a wire exit i.d. that is at least .005”
smaller than your nominal cable diameter .
Request Sales Drawing for PCB
mounting template
1.10
A
Front Panel-Mount Receptacle
Dust Cover
P/N 300390
Black (std.), Gray (opt.)
Dimension
A Part # Part #
(Inches) (Black) (Gray)
0.053 300350 300351
0.064 300352 300353
0.075 300354 300355
0.086 300356 300357
0.096 300358 300359
0.104 300360 300361
0.120 300362 300363
0.129 300364 300365
0.142 300366 300367
0.153 300368 300369
0.162 300370 300371
0.170 300372 300373
0.186 300374 300375
0.204 300376 300377
0.215 300378 300379
0.225 300380 300381
0.235 300382 300383
0.249 300384 300385
0.264 300386 300387
0.300 300388 300389
P/N 300391
Black (std.), Gray (opt.)
CONNECTOR TERMINATION OPTIONS
PL-700SM-N SERIES
Plasc Shell Auto-Coupling Connectors 27 pole capacity circular shell connectors
PCB (Panel-Mount Receptacles only)
Features & Benefits
Plugs:
AI-PL700SMN-P01 (1Pole, 12AWG)
AI-PL700SMN-P02 (2+2Pole, 16/22AWG)
AI-PL700SMN-P03 (1-7Pole, 22AWG)
AI-PL700SMN-P04 (10-14Pole, 22AWG)
AI-PL700SMN-P05 (18-27Pole, 26AWG)
Receptacles:
AI-PL700SMN-IR01 (1Pole, 12AWG)
AI-PL700SMN-IR02 (2+2Pole, 16/22AWG)
AI-PL700SMN-IR03 (1-7Pole, 22AWG)
AI-PL700SMN-IR04 (10-14Pole, 22AWG)
AI-PL700SMN-IR05 (18-27Pole, 26AWG)
AI-PL700SMN-PMR01 (1Pole, 12AWG)
AI-PL700SMN-PMR02 (2+2Pole, 16/22AWG)
AI-PL700SMN-PMR03 (1-7Pole, 22AWG)
AI-PL700SMN-PMR04 (10-14Pole, 22AWG)
AI-PL700SMN-PMR05 (18-27Pole, 26AWG)
ASSEMBLY INSTRUCTIONS
Note: accessories sold separately
PCB (Panel-Mount Receptacles only)
