PL-700SM-N SERIES Plastic Shell Auto-Coupling Connectors 27 pole capacity circular shell connectors PL-700SM-N FEATURES Compact and configurable, the PL-700SM-N Series connector is Amphenol Alden's most versatile offering in a sub .700" diameter package. PL-700SM-N Series connectors attach to a cable with a Press & Seal TM backshell that provides the refined look and performance of an overmolded product. Packaging (intuitive, compact, configurable) Pulse-Lok(R) auto-latch / mating confirmation Miniature .700" diameter circular shell Up to 27 contact positions 16 standard color combinations Multiple and proprietary keying options Available as an overmolded cable assembly Custom configurations available Performance (for harsh environments) Water proof (IP-67 rated) Steam, EtO, & Gamma sterilizable Chemical resistant housing Up to 5,000 mating cycles (with std.Contacts) Factory terminated, overmolded cable assemblies for enhanced flex and strain relief SPECIFICATIONS Electrical (see below) Mating Life: 5,000 cycles min. Contact Resistance: < 10 milliohms* Material Connector Housing: Thermoplastic Flex Reliefs: Thermoplastic Rubber Contacts: Brass / BeCu, Gold Plate per MIL-G-45204 Reusable Socket = 30-45" Gold over 50-200" Nickel strike Disposable Pin = 10-30" Gold over 50-200" Nickel strike Mechanical Mating Cycles: 5K cycles max Retention Force: Mated Connectors: 25 lbs. Minimum Cable to Connector: 35 lbs. Typical Backshell to Connector: 45 lbs. Minimum Housing Styles (Page 2) Plug: In-Line Receptacles: Front & Rear Panel-Mount Receptacles: In-Line TABLE A: Environmental Operating Temp: -20C to +105C** Moisture Resistance: to IP-67 (encapsulated) Sterilizable: gamma, EtO & Autoclave Chem. Resistance: common OR cleaning solvents * post conditioning **Dependent on overmold material STANDARD CONTACT CONFIGURATIONS & SPECFICATIONS Up to 27 Contact Positions Operating Operating Current Max Voltage Max (A) Contact Resistance (ohms) Number of Poles Contact Size Pin (mm) Max Wire Gauge 27 24 0.5 0.5 26 26 300 V RMS 300 V RMS 0.5 0.5 <14m <14m 18 0.5 26 300 V RMS 0.9 <14m 14 12 10 0.7 0.7 0.7 22 22 22 300 V RMS 300 V RMS 300 V RMS 0.9 1.2 2.0 <6m <6m <6m 7 0.7 22 300 V RMS 2.1 <6m 6 0.7 22 300 V RMS 2.1 <6m 5 0.7 22 300 V RMS 2.4 <6m 4 0.7 22 300 V RMS 2.4 <6m 2+2 3 2 2(1.5)-2(0.7) 0.7 0.7 2(16)-2(22) 22 22 300 V RMS 300 V RMS 300 V RMS 7.0/3.0 3.0 3.0 <6m <6m <6m 2 1.5 16 300 V RMS 13.0 <2m 1 0.7 22 300 V RMS 3.0 <6m 1 2.3 12 300 V RMS 15.0 <2m Custom contact inserts are available. Consult factory. Standard Hybrid Circuit Arrangements Coaxial & Custom Circuits Available For additional information about this, or any other Amphenol Alden product, please contact an Amphenol Alden specialist today. Phone: 508-427-7000 Fax: 508-583-0164 www.amphenolalden.com 1 PL-700SM-N SERIES Plastic Shell Auto-Coupling Connectors 27 pole capacity circular shell connectors STANDARD HOUSING OPTIONS Panel-Mount Receptacles In-Line Receptacles In-Line Plugs Front Panel-Mount Receptacle Assembly In-Line Receptacle Kit In-Line Plug Assembly .70 .720 Mounted Height = 0.320 .720 1.54 .90 1.04 Select this component from Table B Panel thickness range to 0.187 Select this component from Table B In-Line Receptacle Kit (w/ optional Press & SealTM Backshell) Front Panel-Mount Receptacle (w/ Dust Cover) Select this component from Table B In-Line Plug Kit (w/ optional Press & SealTM Backshell) 1.60 2.20 Select Press & SealTH Backshell from Table C Select this component from Table B Select this component from Table B Rear Panel-Mount Receptacle Note: Standard color configuration is black on black. See our online configurator for more color options at: www.amphenolalden.com/configurator .89 .815 Select this component from Table B STANDARD PART NUMBERS TABLE B: Number of Poles In-Line Receptacle 27 24 18 14 12 10 7 6 5 4 2(16)+2(22) 3 2 (22) 2 (16) 1 (22) 1 (12) Solder Cup 300322 301270 301242 300294 301214 301186 300266* 301158* 301130* 301102* 300238* 300543* 301046* 301074* 301018* 300210* Front Panel-Mount Receptacle Solder Cup 300196 301004 300990 300182 300976 300962 300168* 300948* 300934* 300920* 300154* 300529* 300892* 300906* 300878* 300140* PCB 330196 330336 330322 330182 330308 330294 330168* 330280* 330266* 330252* 330238* 330224* 330210* FPM Receptacle (w/ Dust Cap) Solder Cup 301589 301575 301561 301547 301533 301519 301505* 301471* 301477* 301449* 301463* 301603* 301421* 301435* 301497* 301393* Rear Panel-Mount Receptacle Solder Cup 301365 301351 301337 301323 301309 300697 300683* 300669* 300655* 300627* 300641* 301379* 300599* 300613* 300585* 300571* In-Line Plug In-Line Plug Solder Cup 300112 300850 300822 300084 300794 300766 300056* 300738* 300710* 300482* 300028* 300501* 300428* 300500* 300400* 300000* Solder Cup 301784 301778 301772 301766 301760 301754 301748* 301742* 301736* 301730* 301724* 301718* 301712* 301706* 301700* 301790* PCB 331196 331336 331322 331182 331308 331294 331168* 331280* 331266* 331252* 331238* 331224* 331210* (Breakaway) Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Amphenol Alden connector configurator located at www.amphenolalden.com/configurator Options Include: Housing Color Options Black & Gray Mating Key Options 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options Up to .125 Standard *Press & SealTM contacts, crimp or solder termination For additional information about this, or any other Amphenol Alden product, please contact an Amphenol Alden specialist today. Phone: 508-427-7000 Fax: 508-583-0164 www.amphenolalden.com 2 PL-700SM-N SERIES Plastic Shell Auto-Coupling Connectors 27 pole capacity circular shell connectors CONNECTOR TERMINATIONOPTIONS OPTIONS CONNECTOR TERMINATION Contact Termination Press & SealTM Features & Benefits Solder Cup (Available for All) Contacts provide IP-67 watertight seal when Features & Benefits inserted into insulator Easy crimp & poke installation Excellent contact retention Contacts may be crimped or soldered Tiered solder cups provide easy access to center positions. Canted cups facilitate quick and easy wire positioning. Standard on 10-27 pole configurations Press & SealTM Contact System Available on 1 to 7-Pole Configurations Accepts multiple wire gauges 12, 16, 22 AWG PCB (Panel-Mount Receptacles only) Panel-Mount, Cut-Out Template .625 Features & Benefits Available in most pole counts .70 mounting Flange Footprint (.75 for RPM spanner nut) from 1 to 27 Poles PCB stand-offs ensure proper positioning Convenient packaging high .560 Request Sales Drawing for PCB mounting template Applies to both Front & Rear Panel-Mount Receptacles Front Panel-Mount Receptacle Dust Cover ACCESSORIES Plug Backshell A P/N 300390 Black (std.), Gray (opt.) 1.10 Plug Soaking Cap P/N 300391 Black (std.), Gray (opt.) temperature contect cures may be soldered to PCB and snapped into panel-mounted receptacle housing later The PL-700 plug housing is designed to accept Amphenol Alden's one piece, Press & Seal PVC Backshell. This unique backshell simply snaps into place providing an IP-67 rated seal to the plug housing and cable exit without hardware resulting in a clean overmolded look. For optimum sealing we suggest selecting a wire exit i.d. that is at least .005" smaller than your nominal cable diameter . Note: accessories sold separately Dimension A (Inches) (Black) (Gray) 0.053 0.064 0.075 0.086 0.096 0.104 0.120 0.129 0.142 0.153 0.162 0.170 0.186 0.204 0.215 0.225 0.235 0.249 0.264 0.300 300350 300352 300354 300356 300358 300360 300362 300364 300366 300368 300370 300372 300374 300376 300378 300380 300382 300384 300386 300388 300351 300353 300355 300357 300359 300361 300363 300365 300367 300369 300371 300373 300375 300377 300379 300381 300383 300385 300387 300389 Part # ASSEMBLY INSTRUCTIONS Receptacles: Plugs: AI-PL700SMN-IR01 (1Pole, 12AWG) AI-PL700SMN-IR02 (2+2Pole, 16/22AWG) AI-PL700SMN-IR03 (1-7Pole, 22AWG) AI-PL700SMN-IR04 (10-14Pole, 22AWG) AI-PL700SMN-IR05 (18-27Pole, 26AWG) AI-PL700SMN-PMR01 (1Pole, 12AWG) AI-PL700SMN-PMR02 (2+2Pole, 16/22AWG) AI-PL700SMN-PMR03 (1-7Pole, 22AWG) AI-PL700SMN-PMR04 (10-14Pole, 22AWG) AI-PL700SMN-PMR05 (18-27Pole, 26AWG) AI-PL700SMN-P01 (1Pole, 12AWG) AI-PL700SMN-P02 (2+2Pole, 16/22AWG) AI-PL700SMN-P03 (1-7Pole, 22AWG) AI-PL700SMN-P04 (10-14Pole, 22AWG) AI-PL700SMN-P05 (18-27Pole, 26AWG) For additional information about this, or any other Amphenol Alden product, please contact an Amphenol Alden specialist today. Part # Phone: 508-427-7000 Fax: 508-583-0164 www.amphenolalden.com 3