1
Motorola Thyristor Device Data
Reverse Blocking Triode Thyristors
. . . designed for industrial and consumer applications such as temperature, light and
speed control; process and remote controls; warning systems; capacitive discharge
circuits and MPU interface.
•Center Gate Geometry for Uniform Current Density
•All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability
•Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
•Low T rigger Currents, 200 µA Maximum for Direct Driving from Integrated Circuits
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating Symbol Value Unit
Peak Repetitive Forward and Reverse Blocking
Voltage(1)
(TJ = –40 to 110 °C)
(1/2 Sine W ave, RGK = 1 kΩ)MCR310-6
MCR310-8
MCR310-10
VDRM
or
VRRM
400
600
800
Volts
On-State RMS Current (TC = 75°C) IT(RMS) 10 Amps
Peak Non-repetitive Surge Current
(1/2 Cycle, 60 Hz, TJ = –40 to 110 °C) ITSM 100 Amps
Circuit Fusing (t = 8.3 ms) I2t 40 A2s
Peak Gate Voltage (t
p
10 µs) VGM ±5Volts
Peak Gate Current (t
p
10 µs) IGM 1Amp
Peak Gate Power (t
p
10 µs) PGM 5Watts
Average Gate Power PG(AV) 0.75 Watt
Operating Junction Temperature Range TJ–40 to +110 °C
Storage Temperature Range Tstg –40 to +150 °C
Mounting Torque – 8 in.-lb.
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Case RθJC 2.2 °C/W
Thermal Resistance, Junction to Ambient RθJA 60 °C/W
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or
negative gate voltage; however, positive gate voltage shall not be applied concurrent with
negative potential on the anode. Blocking voltages shall not be tested with a constant current
source such that the voltage ratings of the devices are exceeded.
Order this document
by MCR310/D
SEMICONDUCTOR TECHNICAL DATA
Motorola, Inc. 1999
CASE 221A-09
(TO-220AB)
STYLE 3
SCRs
10 AMPERES RMS
400 thru 800 VOLTS
C
G
A
KAG
REV 1
2 Motorola Thyristor Device Data
ELECTRICAL CHARACTERISTICS (TC = 25°C, RGK = 1 kΩ unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
Peak Forward Blocking Current(1) TC = 110°C
(TJ = 110°C, VD = Rated VDRM)T
C
= 25°CIDRM —
——
—500
10 µA
µA
Peak Reverse Blocking Current(1) TC = 110°C
(TJ = 110°C, VR = Rated VRRM)T
C
= 25°CIRRM —
——
—500
10 µA
µA
On-State Voltage
(ITM = 20 A Peak, Pulse Width
p
1 ms, Duty Cycle
p
2%) VTM —1.7 2.2 Volts
Gate Trigger Current, Continuous dc(2)
(VD = 12 V, RL = 100 Ω)IGT —30 200 µA
Gate Trigger Voltage, Continuous dc
(VD = 12 V, RL = 100 Ω)
(VD = Rated VDRM, RL = 10 kΩ, TJ = 110°C)
VGT —
0.1 0.5
—1.5
—
Volts
Holding Current
(VD = 12 V, ITM = 100 mA) IH— — 6 mA
Critical Rate of Rise of Forward Blocking Voltage
(VD = Rated VDRM, TJ = 110°C, Exponential W aveform) dv/dt — 10 — V/µs
Gate Controlled Turn-On T ime
(VD = Rated VDRM, ITM = 20 A, IG = 2 mA) tgt — 1 — µs
1. Ratings apply for negative gate voltage or RGK = 1 kΩ. Devices shall not have a positive gate voltage concurrently with a negative voltage
on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage
applied exceeds the rated blocking voltage.
2. Does not include RGK current.
Figure 1. Average Current Derating Figure 2. On-State Power Dissipation
Figure 3. Normalized Gate Current Figure 4. Gate Voltage
0.3 120
0.5
1
2
–40 –20 0 20 40 60 80 90 100
3
140
VD = 12 Vdc
8
TJ, JUNCTION TEMPERATURE (
°
C)
024
110
6
70
80
90
100
10
120
IT(AV), AVERAGE ON-STATE CURRENT (AMPS)
α
= 30
°
180
°
dc
α
= CONDUCTION ANGLE
0.6
α
0.1
0.2
0.3
0.4
0.5
40
0.7
–60 –40 –20 0 10020 60 80 120
VD = 12 Vdc
02 468
16
TJ, JUNCTION TEMPERATURE (
°
C)
0
4
8
12
20
α
α
= CONDUCTION ANGLE
10
IT(AV), AVERAGE ON-STATE CURRENT (AMPS)
90
°
180
°
dc
T , MAXIMUM CASE TEMPERATURE ( C)
C
°
NORMALIZED GATE CURRENT
P , AVERAGE POWER DISSIPATION (WATTS)
AV
V , GATE TRIGGER VOLTAGE (VOLTS)
GT
60
°
α
= 30
°
60
°
90
°
3
Motorola Thyristor Device Data
PACKAGE DIMENSIONS
CASE 221A-09
(TO–220AB)
ISSUE Z
STYLE 3:
PIN 1. CATHODE
2. ANODE
3. GATE
4. ANODE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.035 0.64 0.88
F0.142 0.147 3.61 3.73
G0.095 0.105 2.42 2.66
H0.110 0.155 2.80 3.93
J0.018 0.025 0.46 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 ––– 1.15 –––
Z––– 0.080 ––– 2.04
Q
H
Z
L
V
G
N
A
K
123
4
D
SEATING
PLANE
–T–
C
S
T
U
R
J
4 Motorola Thyristor Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola
was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Af firmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141,
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan. 81–3–5487–8488
Customer Focus Center: 1–800–521–6274
Mfax: RMFAX0@email.sps.mot.com – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
– http://sps.motorola.com/mfax/ 852–26629298
HOME PAGE: http://motorola.com/sps/
MCR310/D
◊
