MEDICAL TELEMETRY APPLICATION DEVELOPMENT KIT ZLE70102 PRODUCT PREVIEW Zarlink's ZL70102 Application Development Kit (ADK) enables rapid evaluation, prototyping and development of medical RF telemetry systems using the ZL70102 Medical Implantable Communication Service (MICS) RF Transceiver. The ZL70102 ADK combines hardware and software to provide an end-to-end MICS communication system using the ZL70102. The ADK contains two applications units, one representing the base station application and one representing the implant application. Please see the ZL70102 Data Sheet and Design Manual for more details on the ZL70102. Using the ZL70102 ADK, users can quickly create custom board designs and use Zarlink software as a starting point for software development for specific ZL70102 enabled MICS RF telemetry systems. Speeding Design of Medical Telemetry Systems Out-of-the-box solution. All hardware and software is provided to operate the ADK, only a PC is required to run the graphical user interface (GUI) software. ADK includes ZL70102 transceiver IC with integrated MAC & PHY, enables industry's lowest power and highest data rate MICS compatible RF telemetry solutions. Both the Base Station and the Implant Application Units are equipped with application microcontrollers with dedicated firmware. The Antenna used by the Implant Application Unit is optimized for air to allow for bench evaluation. Extensive hardware documentation including board schematics, layout, Gerber files, and bill of material (BOM). Complete source code for both the firmware and the GUI is available. The code is well commented and is written in C. The ADK software is updated periodically to support new and advanced features. Ordering Information Base Station Application Unit Implant Application Unit Applications The ZL70102 ADK facilitates rapid development and evaluation of ZL70102 MICS based RF telemetry systems used in implantable medical devices and external remote monitoring and programming equipment, including: Pacemakers Implantable cardioverter defibrillators (ICDs) Neurostimulators Implantable drug pumps Implantable physiologic monitors Implantable sensors and diagnostic devices Cardiac Implantable Loop Recorders The ZL70102 ADK is available for qualified customers. Contact Zarlink's Medical Product Group Sales at http://www. zarlink.com for information, order number ZLE70102BADA. For detailed information on Zarlink's MICS transceiver IC technology, please refer to the ZL70102 Product Preview and Data Sheet located at http://www. zarlink.com. ZLE70102 MEDICAL TELEMETRY APPLICATION DEVELOPMENT KIT ADP Board Base Station Application Unit Both the Implant Unit and the Base Station Unit are equipped with an Application Development Platform (ADP) Board that interfaces to the PC. The board is connected to the PC through a USB cable. The Base Station Application Unit contains the following items: Separate microcontroller to handle the communication between the application and the PC Battery controller with charger Lithium Ion Battery allowing stand alone operation Programmable power supply with integrated current/ voltage measurement capability Implant Application Unit The Implant Application Unit contains the following items: Application Implant (AIM) Board * Optimized MICS radio transceiver based on the ZL70102 * Application Microcontroller with firmware and an interface allowing programming and debugging ADP Board to interface with the PC Antenna optimized for operation in the air. The antenna is connected with an SMA connector allowing 50 custom antennas to be used with the ADK Test Adapter Board allowing probing of digital and analog signals PC/Windows PC/Windows Base Station GUI Implant GUI API (DLL) API (DLL) USB USB ADP Board Communication Microcontroller ADP Board Communication Microcontroller BSM SPI Board Application Microcontroller AIM SPI Board Application Microcontroller Embedded Software Embedded Software Base Station Application (BSM) Board * Optimized MICS radio transceiver based on the ZL70102 * RSSI IF filter, log amplifier and detector for clear channel assesment * 2.45 GHz Wake-Up Transmitter * Application Microcontroller with firmware and an interface allowing programming and debugging ADP Board to interface with the PC Dual band antenna (400 MHz + 2.45 GHz) for operation in the air. The antenna is connected with an SMA connector allowing custom antennas to be tested. Test Adapter Board allowing probing of digital and analog signals (board shared with the Implant Application Unit. Graphical User Interface The PC based graphical user interface (GUI) provides a userfriendly visual interface for controlling and evaluating the performance and capabilities of the ZL70102 RF telemetry system. The software allows access to all the functionality of the ZL70102 as well as providing several system level tools. Embedded Software Embedded Software SPI SPI ZL70102 ZL70102 Block Data Block Data Base Station Application Implant Application Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries is believed to be reliable. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. ZARLINK, ZL, and the Zarlink logo are trademarks of Zarlink Semiconductor Inc. (c) 2010, Zarlink Semiconductor Inc. All Rights Reserved. Publication Number 10ZS174 www.ZARLINK.com