COMBICON compact Screw Compact Terminal Blocks PT(A) 1,5/... with a 3.5 mm Pitch The terminal blocks of the new PT series have the proven screw connection and highly flexible conductor protection. The practical and compact outer dimensions and the generous clamping space make them particularly versatile. With the 3.5 mm pitch, the PT 1,5 is not only available as a PCB terminal block but also as plug-in version. The plugs of the PT 1,5 family can be plugged on the PST 1,0-3,5 pin strip which is also available and reflowsolderable. The PT 1,5-PH-3,5 can only be plugged in horizontally, but its extremely compact dimensions permit the use of a plug-in solution, even under conditions in which space is critical. In contrast, the two integrated plug-in directions of the PT 1,5-PVH-3,5 offer maximum flexibility for the end user and reduce inventory and handling by 50 %. In addition, this plug type can also be coded if desired. Customized labeling of all versions is possible. COMBICON Select The COMBICON search engine with CAD downloading COMBICON Select - the printed circuit board connection software supports your workflow from the PCB and housing layout to the ordering process with: -Systematic and fast selection of products -Universal Internet aided engineering with extensive CAD downloading -Easy-to-use e-shopping functions. http://select.phoenixcontact.com Phoenix Contact GmbH & Co. KG * 32823 Blomberg, Germany Phone +49 52 35 3-00 * Fax +49 52 35 3-4 12 00 * www.phoenixcontact.com Local Contact: www.phoenixcontact.com/salesnetwork Printed Circuit Screw Termination Blocks PT 1,5/...-3,5-H 3.5 mm Pitch No. of pos. Description Printed circuit screw termination blocks with housing interlocking, 3.5 mm pitch, color: green Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 3.5 7 10.5 PT 1,5/2-3,5-H PT 1,5/3-3,5-H PT 1,5/4-3,5-H 19 84 61 7 19 84 62 0 19 84 63 3 250 250 250 5 6 7 14 17.5 21 PT 1,5/5-3,5-H PT 1,5/6-3,5-H PT 1,5/7-3,5-H 19 84 64 6 19 84 65 9 19 84 66 2 100 100 100 8 9 10 24.5 28 31.5 PT 1,5/8-3,5-H PT 1,5/9-3,5-H PT 1,5/10-3,5-H 19 84 67 5 19 84 68 8 19 84 69 1 100 100 100 11 12 13 35 38.5 42 PT 1,5/11-3,5-H PT 1,5/12-3,5-H PT 1,5/13-3,5-H 19 84 70 1 19 84 71 4 19 84 72 7 50 50 50 14 15 16 45.5 49 52.5 PT 1,5/14-3,5-H PT 1,5/15-3,5-H PT 1,5/16-3,5-H 19 84 73 0 19 84 74 3 19 84 75 6 50 50 50 SZS 0,4 x 2,5 12 05 03 7 10 (1) Screwdriver Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 3.5 1.2 0.9 0.2 - 0.34 / 0.2 - 0.5 - - 5 - M2 0.25 PA V0 300 / 10 / 26 - 16 -- 1) When using ferrules with a plastic sleeve, 125 V max. can be achieved in connection with surge voltage category / contamination class II/2. 7 ,6 a + 3 ,5 9 ,2 1 ,7 5 4 ,5 1 ,2 3 ,1 II / 2 400 2.5 0.2 - 1.5 / 0.2 - 1.5 / 26 - 16 - / 0.751) a 3 ,5 I III / 2 200 2.5 17.5 / 1.5 17.5 / 1.5 III / 3 160 2.5 PHOENIX CONTACT page 2 of 7 3 ,1 7 1 ,7 5 3 ,5 a Printed Circuit Screw Termination Blocks PT 1,5/...-3,5-V 3.5 mm Pitch No. of pos. Description Printed circuit screw termination blocks with housing interlocking, 3.5 mm pitch, color: green Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 3.5 7 10.5 PT 1,5/2-3,5-V PT 1,5/3-3,5-V PT 1,5/4-3,5-V 19 84 76 9 19 84 77 2 19 84 78 5 250 250 250 5 6 7 14 17.5 21 PT 1,5/5-3,5-V PT 1,5/6-3,5-V PT 1,5/7-3,5-V 19 84 79 8 19 84 80 8 19 84 81 1 100 100 100 8 9 10 24.5 28 31.5 PT 1,5/8-3,5-V PT 1,5/9-3,5-V PT 1,5/10-3,5-V 19 84 82 4 19 84 83 7 19 84 84 0 100 100 100 11 12 13 35 38.5 42 PT 1,5/11-3,5-V PT 1,5/12-3,5-V PT 1,5/13-3,5-V 19 84 85 3 19 84 86 6 19 84 87 9 50 50 50 14 15 16 45.5 49 52.5 PT 1,5/14-3,5-V PT 1,5/15-3,5-V PT 1,5/16-3,5-V 19 84 88 2 19 84 89 5 19 84 90 5 50 50 50 SZS 0,4 x 2,5 12 05 03 7 10 (1) Screwdriver Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 3.5 1.2 0.9 I III / 2 200 2.5 17.5 / 1.5 17.5 / 1.5 III / 3 160 2.5 0.2 - 1.5 / 0.2 - 1.5 / 26 - 16 - / 0.751) 0.2 - 0.34 / 0.2 - 0.5 - - 5 - M2 0.25 PA V0 300 / 10 / 26 - 16 -- 1) When using ferrules with a plastic sleeve, 125 V max. can be achieved in connection with surge voltage category / contamination class II/2. a 9 ,2 4 ,5 7 1 ,2 4 ,2 a + 3 ,5 1 ,7 5 7 ,6 3 ,5 II / 2 400 2.5 PHOENIX CONTACT page 3 of 7 4 ,2 1 ,7 5 3 ,5 a Printed Circuit Screw Termination Blocks PTA 1,5/...-3,5 3.5 mm Pitch No. of pos. Description Printed circuit screw termination blocks with housing interlocking, 3.5 mm pitch, color: green Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 3.5 7 10.5 PTA 1,5/2-3,5 PTA 1,5/3-3,5 PTA 1,5/4-3,5 19 88 95 6 19 88 96 9 19 88 97 2 250 250 250 5 6 7 14 17.5 21 PTA 1,5/5-3,5 PTA 1,5/6-3,5 PTA 1,5/7-3,5 19 88 98 5 19 88 99 8 19 89 00 7 100 100 100 8 9 10 24.5 28 31.5 PTA 1,5/8-3,5 PTA 1,5/9-3,5 PTA 1,5/10-3,5 19 89 01 0 19 89 02 3 19 89 03 6 100 100 100 11 12 13 35 38.5 42 PTA 1,5/11-3,5 PTA 1,5/12-3,5 PTA 1,5/13-3,5 19 89 04 9 19 89 05 2 19 89 06 5 50 50 50 14 15 16 45.5 49 52.5 PTA 1,5/14-3,5 PTA 1,5/15-3,5 PTA 1,5/16-3,5 19 89 07 8 19 89 08 1 19 89 09 4 50 50 50 SZS 0,4 x 2,5 12 05 03 7 (1) Screwdriver 10 Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 3.5 1.2 0.9 I III / 2 200 2.5 17.5 / 1.5 17.5 / 1.5 III / 3 160 2.5 II / 2 400 2.5 0.2 - 1.5 / 0.2 - 1.5 / 26 - 16 - / 0.751) 0.2 - 0.34 / 0.2 - 0.5 - - 5 - M2 0.25 PA V0 -- -- ) When using ferrules with a plastic sleeve, 125 V max. can be achieved in connection with surge voltage category / contamination class II/2. 1 1,75 a 3,5 11,2 3,5 2,4 9,9 a+3,5 2,4 1,75 3,5 a 1,3 PHOENIX CONTACT page 4 of 7 Pluggable Screw Termination Blocks PT 1,5/...-PVH-3,5 3.5 mm Pitch Description No. of pos. Printed circuit screw termination blocks with housing interlocking, 3.5 mm pitch, color: green Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 3.5 7 10.5 PT 1,5/2-PVH-3,5 PT 1,5/3-PVH-3,5 PT 1,5/4-PVH-3,5 19 84 01 5 19 84 02 8 19 84 03 1 250 250 250 5 6 7 14 17.5 21 PT 1,5/5-PVH-3,5 PT 1,5/6-PVH-3,5 PT 1,5/7-PVH-3,5 19 84 04 4 19 84 05 7 19 84 06 0 100 100 100 8 9 10 24.5 28 31.5 PT 1,5/8-PVH-3,5 PT 1,5/9-PVH-3,5 PT 1,5/10-PVH-3,5 19 84 07 3 19 84 08 6 19 84 09 9 100 100 100 11 12 13 35 38.5 42 PT 1,5/11-PVH-3,5 PT 1,5/12-PVH-3,5 PT 1,5/13-PVH-3,5 19 84 10 9 19 84 11 2 19 84 12 5 50 50 50 14 15 16 45.5 49 52.5 PT 1,5/14-PVH-3,5 PT 1,5/15-PVH-3,5 PT 1,5/16-PVH-3,5 19 84 13 8 19 84 14 1 19 84 15 4 50 50 50 (1) Coding profile, is inserted into the hole on the plug, insulating material: red CP-PT 1,5 19 85 56 4 100 (2) Screwdriver SZS 0,4 x 2,5 12 05 03 7 10 Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 3.5 dependent on the pin strip used dependent on the pin strip used III / 3 160 2.5 I III / 2 200 2.5 8 / 1.5 8 / 1.5 II / 2 400 2.5 0.2 - 1.5 / 0.2 - 1.5 / 26 - 16 - / 0.751) 0.2 - 0.34 / 0.2 - 0.5 - - 5 - M2 0.25 PA V0 300 / 10 / 26 - 16 -- 1) When using ferrules with a plastic sleeve, 125 V max. can be achieved in connection with surge voltage category / contamination class II/2. 4 ,8 PHOENIX CONTACT page 5 of 7 a + 3 ,5 7 1 1 ,1 1 4 ,6 4 ,1 1 4 1 ,7 5 3 ,5 a Pluggable Screw Termination Blocks PT 1,5/...-PH-3,5 3.5 mm Pitch Description Pluggable screw termination blocks with housing interlocking, 3.5 mm pitch, color: green No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 2 3 4 3.5 7 10.5 PT 1,5/2-PH-3,5 PT 1,5/3-PH-3,5 PT 1,5/4-PH-3,5 19 84 31 6 19 84 32 9 19 84 33 2 250 250 250 5 6 7 14 17.5 21 PT 1,5/5-PH-3,5 PT 1,5/6-PH-3,5 PT 1,5/7-PH-3,5 19 84 34 5 19 84 35 8 19 84 36 1 100 100 100 8 9 10 24.5 28 31.5 PT 1,5/8-PH-3,5 PT 1,5/9-PH-3,5 PT 1,5/10-PH-3,5 19 84 37 4 19 84 38 7 19 84 39 0 100 100 100 11 12 13 35 38.5 42 PT 1,5/11-PH-3,5 PT 1,5/12-PH-3,5 PT 1,5/13-PH-3,5 19 84 40 0 19 84 41 3 19 84 42 6 50 50 50 14 15 16 45.5 49 52.5 PT 1,5/14-PH-3,5 PT 1,5/15-PH-3,5 PT 1,5/16-PH-3,5 19 84 43 9 19 84 44 2 19 84 45 5 50 50 50 SZS 0,4 x 2,5 12 05 03 7 10 (1) Screwdriver Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Connection capacity Solid / stranded / conductor sizes [mm2]/[mm2]/AWG Stranded with ferrule without / with plastic sleeve [mm2] Multiple connection (2 conductors with same cross section) Solid / stranded [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) - Thread - Torque [Nm] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 3.5 dependent on the pin strip used dependent on the pin strip used I III / 2 200 2.5 8 / 1.5 8 / 1.5 III / 3 160 2.5 II / 2 400 2.5 0.2 - 1.5 / 0.2 - 1.5 / 26 - 16 - / 0.751) 0.2 - 0.34 / 0.2 - 0.5 - - 5 - M2 0.25 PA V0 300 / 10 / 26 - 16 -- 1) When using ferrules with a plastic sleeve, 125 V max. can be achieved in connection with surge voltage category / contamination class II/2. 1 2 ,9 1 1 ,1 a + 3 ,5 2 ,3 1 2 ,3 PHOENIX CONTACT page 6 of 7 1 ,7 5 3 ,5 a Pin Strips PST 1,0/...-3,5 3.5 mm Pitch Description Pin strip, 3.5 mm pitch, color: black No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 501) 2 3 4 3.5 7 10.5 PST 1,0/2-3,5 PST 1,0/3-3,5 PST 1,0/4-3,5 19 45 09 6 19 45 10 6 19 45 11 9 5 6 7 14 17.5 21 PST 1,0/5-3,5 PST 1,0/6-3,5 PST 1,0/7-3,5 19 45 12 2 19 45 13 5 19 45 14 8 8 9 10 24.5 28 31.5 PST 1,0/8-3,5 PST 1,0/9-3,5 PST 1,0/10-3,5 19 45 15 1 19 45 16 4 19 45 17 7 11 12 13 35 38.5 42 PST 1,0/11-3,5 PST 1,0/12-3,5 PST 1,0/13-3,5 19 45 18 0 19 45 19 3 19 45 20 3 14 15 16 45.5 49 52.5 PST 1,0/14-3,5 PST 1,0/15-3,5 PST 1,0/16-3,5 19 45 21 6 19 45 22 9 19 45 23 2 Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm]x[mm] Technical data in accordance with IEC/ DIN VDE Insulating material group - Surge voltage category / contamination class -/- Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL: [V]/[A]/AWG CSA: [V]/[A]/AWG see description 3.5 1.2 1 IIIa III / 2 250 2.5 82 ) 82) PA V0 III / 3 160 2.5 II / 2 250 2.5 300 / 10 / --) Larger packing units are available on request. ) The maximum current depends on the plug used. The lower value of the two for plug and pin strip is the deciding factor. 1 3 ,5 2 1 3 7 ,2 1 ,2 a a + 3 ,5 PHOENIX CONTACT page 7 of 7 1 Phoenix Contact a 2 ,8 1 ,7 5 30.04.05 TNR: 5127409-01 2