© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
7mm Spot Diameter LED
OP207CL
Issue C 06/2019 Page 2
TT Electronics | OPTEK Technology
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.electronics.com | sensors@electronics.com
Absolute Maximum Rangs (TA = 25° C unless otherwise noted)
Storage Temperature Range -40o C to +105o C
Operang Temperature Range -40o C to +105o C
Reverse Voltage 10 V
Connuous Forward Current 100 mA
Power Dissipaon(1) 190 mW
Peak Package Body Temperature (Tp) (2) 200°C
Electrical Specification
Electrical Characteriscs (TA = 25° C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
PO Total Output Radiant Power 10.0 - mW IF = 50 mA
Sd Spot Light Diameter 7.0 mm IF = 50 mA , measured at 1.5mm
from lens p
½ θHP Half Intensity Beam Angle 2.25 Degree IF = 50 mA
λP Wavelength at Peak Emission 840 855 870 nm IF = 100 mA
VF Forward Voltage 1.5 1.9 V IF = 50 mA
IR Reverse Leakage Current - 10 µA VR = 5.0V
tr, tf Rise Time, Fall Time 22 ns IF(PEAK) = 50mA, PW = 10µs, 10% D.C.
Notes: 1. Derate linearly at 3.42 mW/°C above 60°C.
2. For hand soldering use SAC solder. No clean ux recommended.
Recommended Land Paern
Tolerance ± .005 inches