Amphenol
106
Amphenol Atex Field Bus range is designed for device group II category 3G. According to EN60079-15 it may be
operated within zone 2 and class I, Division 2, as low power non sparking connectors.
RJFTVX • Rugged and sealed RJ45 connector
Characteristics
n Ex marking II3G ExnAIIT6 X
n Operating temperature range -40°C / +60°C
n Voltage 60 Ve max
n Power 20 W max
n Outside cable diameter 6mm to 12mm
n Sealing IP68
n Data transmission 10 BaseT, 100 BaseTX & 1000
BaseT networks. Cat. 5e per
TIA/EIA 568B & Class D per
ISO/IEC 11801
RJFTvX, USBFTvX, RJ11FTvX
RJ45, USB, RJ11/12 explosion proof solutions for Zone 2
RJFTVX allows you to use an Ethernet Class D / Cat. 5e
connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks
in ATEX zone 2 environments. With the patented RJStop system
you can use a standard RJ45 cordset in a metallic plug which will
protect it from shocks, dust and fluids. RJFTVX features the same
main characteristics than RJFTV series (see page 24).
Nickel
plating
Olive drab
cadmium plating
Part
number
Plug RJFTVX6MN RJFTVX6MG
IP68 metallic cap RJFTVC6N RJFTVC6G
Nickel plating Olive drab cadmium plating
Part
number
Receptacle, RJ45 back termination, coding A RJFTVX2SA1N RJFTVX2SA1G
Receptacle cap RJFTVC2N RJFTVC2G
Plug
Square ange receptacle
Amphenol
107
Series
RJ Field TV
RJF TVX 7S A 2 N 05 100BTX
Shell Type
2S : Square flange receptacle
7S: Jam nut receptacle
6 : Plug
Coding
"A" (Standard) or "B", “C”, “D”
Back Terminations (for receptacles only)
1: Female RJ45
2: RJ45 cordset
Shell Material and Finish:
N: Nickel
G: Olive drab cadmium
Cordset length (for receptacles with “2” back termination only)
03 100BTX:30 cm [11.81 inches]
05 100 BTX:50 cm [19.68 inches]
10 100 BTX:1 meter [39.37 inches]
15 100BTX: 1,5 meters [59.04 inches]
Nickel plating Olive drab cadmium plating
Part
number
Receptacle, RJ45 back termination, coding A RJFTVX7SA1N RJFTVX7SA1G
IP68 metallic cap RJFTVC7N RJFTVC7G
Jam nut receptacle
Part number code
REMARK: As receptacles are compounded (IP68 transversally sealing), coding
position has to be specified in the part number : A (standard), B, C or D
Receptacles can be provided with RJ45 cordsets.
There are 4 standard lengths as described hereunder (with coding "A"):
Part
number
Nickel plating Olive drab cadmium
plating
RJ45 cordset length
meters
RJFTVX2SA2N03100BTX RJFTVX2SA2G03100BTX 0.3
RJFTVX2SA2N05100BTX RJFTVX2SA2G05100BTX 0.5
RJFTVX2SA2N10100BTX RJFTVX2SA2G10100BTX 1.0
RJFTVX2SA2N15100BTX RJFTVX2SA2G15100BTX 1.5
Amphenol
108
USBFTVX • Rugged and sealed USB connector
Characteristics
n Ex marking II3G ExnAIIT6 X
n Operating temperature range -40°C / +70°C
n Voltage 60 Ve max
n Power 20 W max
n Outside cable diameter 4mm to 6mm
n Sealing IP68
n Data transmission USB 2.0 up to 480 Mb/s
Cable end Type "A" (Standard USB "A" Plug) Cable end Type "OPEN" (No connector)
Nickel plating Olive drab cadmium plating
Part
number
Plug USBFTVX6N USBFTVX6G
IP68 metallic cap USBFTVC6N USBFTVC6G
Plug
Square ange receptacle
With USBFTVX, you can insert a standard USB 2.0 cordset into a
metallic plug which will protect it from shocks, dust and uids.
This range is tted to be used in Atex zone 2 environments.
This metallic plug is connected into a receptacle, using a Tri
Start thread coupling mechanism (MIL-DTL-38999 series III type)
with anti-decoupling device for high vibrations.
USBFTVX features the same main characteristics than USBFTV
series (see page 72).
Amphenol
109
Series
USB Field TV
USBF TVX 2S A 2 N 03 A
Shell Type
2S : Square flange receptacle
7S: Jam nut receptacle
Coding
"A" (Standard) or "B"
Back Terminations
2: Rugged USB cable
Shells Plating
N: Nickel
G: Olive drab cadmium plating
USB cable length
03: 30 cm [11.81 inches]
05: 50 cm [19.68 inches]
10: 1 meter [39.37 inches]
USB cable end
A: Standard USB-A plug
OPEN: Open cable (no connector)
Cable end Type "A" (Standard USB "A" Plug) Cable end Type "OPEN" (No connector)
Jam nut receptacle
Part number code
Nickel plating Olive drab cadmium plating
Part number FOR
Cap for Square ange receptacle USBFTVC2N USBFTVC2G
Cap for Jam nut receptacle USBFTVC7N USBFTVC7G
CAPS for receptacles :
Amphenol
110
RJ11FTVX • Rugged and sealed RJ11/12 connector
RJ11FTVX allows you to use a standard phone RJ11/RJ12 connection in Atex
zone 2 environments.
With the patented RJStop® system you can use a standard RJ11 / RJ12 cordset
in a metallic plug which will protect it from shocks, dust and fluids.
Nickel plating Olive drab cadmium plating
Part
number
Plug RJ11FTVX6MN RJ11FTVX6MG
Cap RJ11FTVC6N RJ11FTVC6G
Plug
Characteristics
n Ex marking II3G ExnAIIT6 X
n Operating temperature range -40°C / +60°C
n Voltage 60 Ve max
n Power 20 W max
n Outside cable diameter 4mm to 5.5mm
n Sealing IP68
n Coupling mechanism Tri Star thread with anti-decoupling device (MIL-DTL-38999 series III)
n Mating cycles 500 min
n Salt spray 48h with nickel plating / 500 h with oliv drab cadmium plating
n Coding 4 mechanical user-dened coding / Polarization settings (insert rotation)
n Fire retardant / Low smoke UL94 V0 and NF16 101 & 16 102
n R11 cordset retention in the plug 100 N in the Axis
Amphenol
111
Square ange receptacle
Nickel plating Olive drab cadmium plating
Part
number
Receptacle - Female RJ45 back termination - Coding A RJ11FTVX2SA1N RJ11FTVX2SA1G
Receptacle CAP RJ11FTVC2N RJ11FTVC2G
Jam nut receptacle
Nickel plating Olive drab cadmium plating
Part
number
Receptacle - Female RJ45 back termination - Coding A RJ11FTVX7SA1N RJ11FTVX7SA1G
Receptacle CAP RJ11FTVC7N RJ11FTVC7G
j INSTRUCTIONS D'ASSEMBLAGE
ASSEMBLY INSTRUCTIONS
m TEST DE TENSION DE TENUE A 500V PENDANT 1 MINUTE.
DIELECTRIC WITHSTANDING VOLTAGE TEST OF 500V DURING 1 MINUTE.
P
CORRECT
EMBASE A COLLERETTE CARREE
SQUARE FLANGE RECEPTACLE
EMBASE A FIXATION PAR ECROU HEXAGONAL
JAM NUT RECEPTACLE
l PERCAGE PANNEAU
PANEL DRILLING
FIGURE 1
RJ11FTVX - 40831 - Rev A
k NOTICE D'UTILISATION OUTIL DE DEMONTAGE
INSTRUCTION FOR REMOVAL TOOL USE
FIGURE 2
Amphenol
socapex
www.RJField.com
Amphenol
socapex
www.RJField.com
FIGURE 3
Diamètre de câble acceptable : 4 à 5.5mm
Outside cable diameter : 4 to 5.5mm
REMARK: As receptacles are compounded (IP68 transversally sealing), coding
position has to be specified in the part number : A (standard), B, C or D
(connection side views)
Receptacle
Plug
Amphenol
112
P/N: RJSPC-EX-5ES1-PLG-CAPS
Note: this part number includes:
• One ATEX Zone 2 IP68 Plug and Play Ethernet switch
equipped with caps on Ethernet connectors
• One power plug equipped with anti decoupling nut
• Five Ethernet plugs equipped with anti decoupling spring
P/N: RJSPC-EX-5RS1-PLG-CAPS
Note: this part number includes:
• One ATEX Zone 2 IP68 RING Ethernet switch equipped
with caps on Ethernet connectors
• One power plug equipped with anti decoupling nut
• Five Ethernet plugs equipped with anti decoupling spring
This Ethernet Switch is a combination of rugged packaging
with locking device for Zone 2 hazardous location, with
fault-tolerant network redundancy.
RJSPCEX ATEX ZONE 2 RUGGED & IP68
Sealed ethernet switch
Description (example for Ring model)
n Waterproof IP68 Rating (NEMA 6)
n Reduced Installation Costs with the patented RJStop® system
n Use any standard RJ45 cordset
n Rugged Enclosure in Polyester reinforced with 30% glass fiber
n Redundant power inputs with surge/spike protection
n Ultra reliable 1,000,000 hours Mean Time Between Failure (MTBF)
n Zone 2 hazardous location (models RJSPC-EX)
LEDs indicating activity, link status, datarate (10/100 Mbps)
LED indicating ring status
5 rugged IP68 RJ Field Ethernet ports
Real-time ring feature
IP68 polyester enclosure reinforced with glass fiber
OK power & ring status
LEDs indicating power
Anti-decoupling nut for power plug
Anti-decoupling spring for ethernet plugs
Industrial Applications
n Oil & Gas
n Process Control
n Factory Automation
COMPLIANT
ROHS
Outstanding features
n IP65/68 Sealing
n ATEX Zone 2II3G ExnAII T4X (EN60079-15 & EN60079-0)
n Plug and Play simplicity
n Ring redundancy
n Operating temperature: -40°F to 170°F (-40°C to +75°C)
Key Features
n Ring Switch Networking Features (managed features available!)
n Real-Time Ring for ultra-fast fault-tolerant loops
• Recovery time of 30 ms + 5 ms per hop!
n Modbus monitoring over Ethernet
• Ideal for deterministic systems and PLCs
n Real-time traffic prioritization (QoS and CoS)
• Assure delivery of real-time data
• Improve network utilization
• User settable priority assignments
n Advanced switch features
• User configurable port settings
• Port mirroring for traffic diagnostics
• Pre-configurable for Plug-And-Play simplicity
