General Description
The MAX5160/MAX5161 linear-taper digital potentiome-
ters perform the same function as a mechanical poten-
tiometer or a variable resistor. They consist of a fixed
resistor and a wiper contact with 32 tap points that are
digitally controlled by three lines for the 8-pin MAX5160
or by two lines for the 6-pin MAX5161.
These parts are ideal for applications requiring digitally
controlled resistors. Three resistance values are avail-
able for each part type: 50k, 100k, and 200k. A
nominal resistor temperature coefficient of 50ppm/°C
end-to-end and only 5ppm/°C ratiometric makes the
MAX5160 ideal for applications requiring a low-temper-
ature-coefficient variable resistor, such as low-tempco,
adjustable-gain circuit configurations.
The MAX5160 is available in an 8-pin µMAX package,
and the MAX5161 is available in a 6-pin SOT23 pack-
age. Both devices are guaranteed over the extended-
industrial temperature range (-40°C to +85°C).
Applications
LCD Screen Adjustment
Volume Control
Mechanical Potentiometer Replacement
Features
32 Tap Positions
50k, 100k, and 200kResistance Values
400Wiper Resistance
±25% Resistance Tolerance
3-Wire Serial Data Input
±1LSB DNL
±0.5LSB INL
100nA Supply Current
+2.7V to +5.5V Single-Supply Operation
Power-On Reset: Wiper Goes to Midscale
(position 16)
±2kV ESD Protection
Small-Footprint Packages
6-Pin SOT23 (MAX5161)
8-Pin µMAX (MAX5160)
Glitchless Switching Between the Resistor Taps
MAX5160/MAX5161
Low-Power Digital Potentiometers
________________________________________________________________Maxim Integrated Products 1
1
2
3
4
8
7
6
5
VDD
CS
L
WGND
H
U/D
INC
MAX5160
µMAX
TOP VIEW
H
U/DGND
16VDD
5INC
L
MAX5161
SOT23-6
2
34
UP/DN
COUNTER
VDD
GND
CS
H
L
W
INC
U/D
POSITION
DECODER
MAX5160
MAX5161
Functional Diagram
19-1435; Rev 2a; 2/01
PART
MAX5160NEUA
MAX5160MEUA
PIN-
PACKAGE
8 µMAX
8 µMAX
Pin Configurations
Selector Guide
Ordering Information
-40°C to +85°C
-40°C to +85°C
TEMP. RANGE
MAX5160LEUA -40°C to +85°C 8 µMAX
MAX5161NEZT -40°C to +85°C 6 SOT23
MAX5161MEZT -40°C to +85°C 6 SOT23
MAX5161LEZT -40°C to +85°C 6 SOT23
R
(k)
200
100
50
200
100
50
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
PART TOP
MARK
R
(k)
MAX5160NEUA 200
MAX5160MEUA 100
MAX5160LEUA 50
MAX5161NEZT AAAC 200
MAX5161MEZT AAAB 100
MAX5161LEZT AAAA 50
MAX5160/MAX5161
Low-Power Digital Potentiometers
2 _______________________________________________________________________________________
Note 1: For the MAX5160, linearity is defined in terms of H to L code-dependent resistance.
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +5.5V, VH= VDD, VL= 0, TA = TMIN to TMAX. Typical values are at VDD = +5V, TA= +25°C, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VDD to GND..............................................................-0.3V to +6V
CS, INC, U/Dto GND ...............................................-0.3V to +6V
H, L, W to GND.......................................... -0.3V to (VDD + 0.3V)
Input and Output Latchup Immunity ..............................±200mA
Maximum Continuous Current into H, L, and W
MAX516_ _ E_ _...............................................................±1mA
Continuous Power Dissipation (TA= +70°C)
6-Pin SOT23 (derate 6.25mW/°C above +70°C)...........500mW
8-Pin µMAX (derate 4.1mW/°C above +70°C) ..............330mW
Operating Temperature Range .......................... -40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................+300°C
MAX516_ME_ _
MAX516_NE_ _
MAX516_LE_ _
CONDITIONS
ns50tDI
U/Dto INC Setup
ns0tID
U/Dto INC Hold
ns25tIH
INC High Period
ns25tIL
INC Low Period
ns0tIC
CS to INC Hold Time
ns25tCI
CS to INC Setup Time
pF5Input Capacitance
µA±1Input Leakage Current
V
0.3 VDD
VIL
Input Low Voltage
V
0.7 VDD
VIH
Input High Voltage
k
37.5 50 62.5
HLEnd-to-End Resistance
LSB±1/2INLIntegral Nonlinearity (Note 1)
%3Resolution
75 100 125
150 200 250
400 1700RW
Wiper Resistance
LSB+0.1Zero-Scale Error
LSB±1DNLDifferential Nonlinearity (Note 1)
ppm/°C50TCR
End-to-End Resistor Tempco
ppm/°C5Ratiometric Resistor Tempco
LSB-0.1Full-Scale Error
UNITSMIN TYP MAXSYMBOLPARAMETER
MHz7fIMAX
INC Frequency
µs1tIW
Wiper-Settling Time
CS = INC = U/D=
VDD or GND nA135
IDD
Supply Current µA0.6 10
V2.7 5.5VDD
Supply Voltage
VDD = +5V
VDD = +2.7V
pF10CW
Wiper Capacitance
DIGITAL INPUTS
TIMING CHARACTERISTICS (Figure 6)
POWER SUPPLIES
DC PERFORMANCE
MAX5160/MAX5161
Low-Power Digital Potentiometers
_______________________________________________________________________________________ 3
0
200
400
600
800
1,000
012345
WIPER RESISTANCE
vs. WIPER VOLTAGE
MAX5160/61 toc01
WIPER VOLTAGE (V)
WIPER RESISTANCE ()
RWMAX = 574.0804
VDD = +2.7V
VDD = +5V
-0.16
-0.10
-0.12
-0.14
0
-0.02
-0.04
-0.06
-0.08
0.02
0.04
0.06
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90
END-TO-END RESISTANCE % CHANGE
vs. TEMPERATURE
MAX5160/61 toc02
TEMPERATURE (°C)
END-TO-END RESISTANCE % CHANGE
200k
200k
100k
50k
50k
100k
0
50
25
125
100
75
150
175
200
225
1 5 9 131721252933
END-TO-END RESISTANCE
vs. TAP POSITION
MAX5160/61 toc03
TAP POSITION
RESISTANCE (k)
200k
0
20
10
50
40
30
60
70
80
90
100
110
1 5 9 131721252933
END-TO-END RESISTANCE
vs. TAP POSITION
MAX5160/61 toc04
TAP POSITION
RESISTANCE (k)
100k
Typical Operating Characteristics
(VDD = +5V, TA= +25°C, unless otherwise noted.)
0
10
5
25
20
15
30
35
40
45
50
1 5 9 131721252933
END-TO-END RESISTANCE
vs. TAP POSITION
MAX5160/61 toc05
TAP POSITION
RESISTANCE (k)
50k
MAX5160/MAX5161
Low-Power Digital Potentiometers
4 _______________________________________________________________________________________
PIN
OUTPUT
W
50mV/div
0V
INC
2V/div
0V
5µs/div
TAP-TO-TAP SWITCHING TRANSIENT
MAX5160/61 toc07
Typical Operating Characteristics (continued)
(VDD = +5V, TA= +25°C, unless otherwise noted.)
0
0.2
0.1
0.5
0.4
0.3
0.8
0.7
0.6
0.9
-40 0 20-20 406080100
SUPPLY CURRENT vs. TEMPERATURE
MAX5160/61 toc06
TEMPERATURE (°C)
SUPPLY CURRENT (µA)
VDD = +5V
VDD = +2.7V
1INC Wiper Increment Control Input. With CS low, a high-to-low transition increments
(U/Dhigh) or decrements (U/Dlow) the wiper position.
2U/DUp/Down Control Input. With CS low, a high-to-low INC transition increments
(U/Dhigh) or decrements (U/Dlow) the wiper position.
3 H High Terminal of Resistor
4GND Ground
8 VDD Power Supply
7CS Chip-Select Input. Drive low to change the wiper position through INC and U/D.
6 L Low Terminal of Resistor
5 W Wiper Terminal of Resistor
Pin Description
NAME FUNCTION
MAX5160
5
4
PIN
2
3
6
1
MAX5161
MAX5160/MAX5161
Low-Power Digital Potentiometers
_______________________________________________________________________________________ 5
Detailed Description
The MAX5160/MAX5161 consist of resistor arrays with
thirty-one resistive elements. Thirty-two tap points are
accessible to the wiper along the resistor string
between H and L. Logic inputs CS, U/D, and INC
determine the position of the wiper. With CS low and
U/Dhigh, a high-to-low transition on INC increments the
internal counter, increasing the resistance between W
and L. When both CS and U/Dare low, a high-to-low
INC transition decrements the internal counter, decreas-
ing the resistance between W and L. At either end
(maximum or minimum positions), additional transitions in
the direction of the end points will not change the counter
value (the counter will not wrap around).
The H and L terminals of the MAX5160 are similar to the
two end terminals of a mechanical potentiometer. The
tap W is equivalent to the variable tap (wiper) of the
potentiometer.
The MAX5161 is similar to the MAX5160 except that CS
internally connects to ground and the wiper terminal (W)
is shorted to the high terminal (H). The MAX5161 acts as
a variable resistor (a potentiometer with the wiper and
one end terminal shorted together).
The MAX5160/MAX5161 feature power-on reset circuit-
ry that sets the wiper position to midscale at power-up.
Applications Information
The MAX5160/MAX5161 are intended for circuits
requiring digitally controlled adjustable voltage or
adjustable gain, such as LCD contrast control, where
voltage biasing adjusts the display contrast.
Controlling a Switch-Mode
LCD Bias Generator
Figure 1 shows an application where the MAX5161 is
used with a MAX1771 to make an adjustable positive
LCD-bias circuit. The output of the MAX1771 is a posi-
tive voltage that is digitally controlled through the
MAX5160/MAX5161. Similarly, Figure 2 shows the
application of the MAX5161 in a digitally controlled
negative LCD-bias circuit along with the MAX774/
MAX775/MAX776.
MAX1771
VIN = 5V
REF
SHDN
AGND
GND
N
MTD20N03HDL
7
EXT
CS
FB
L1
22µHD1
1N5817-22
C4
300µF
C5
C3
0.1µF
5
4
6
1
8
3
2
V+
C1
68µF
VOUT = 12V
AT 0.5A
R2
RSENSE
40m
C2
0.1µF
VREF = 1.5V
R1
RVAR
VOUT(MAX) = R2 + 1
VREF R1
VOUT(MIN) =
(
R2
)
+ 1
VREF R1 + RVAR(MAX)
MAX5161
Figure 1. Adjustable Positive LCD Bias
MAX774
MAX775
MAX776
OUT V+
SHDN
CS
FB EXT
GND
P
7
8
C2
0.1µF
R3
0.07
R1
R2
RVAR
C1
150µF
6
5
2
3
1
REF
4
Q1
Si9435
1N5822/
MBR340
L1
22µHC4*
VIN
C3
0.1µF
VOUT
* MAX774 = 330µF, 10V
MAX775, MAX776 = 120µF, 20V
VOUT(MAX) = R2 , VOUT(MIN) = R2
VREF R1 VREF R1 + RVAR
VREF - VFB 5µA (FOR 2% GAIN-SETTING ACCURACY)
R1 + RVAR
MAX5161
Figure 2. Adjustable Negative LCD Bias
MAX5160/MAX5161
Alternative Positive
LCD Bias Control
Alternatively, use an op amp to provide buffering and
gain to the output of the MAX5160/MAX5161. Connect
the MAX5160 to the positive input of a noninverting op
amp (Figure 3) to select a portion of the input signal by
digitally controlling the wiper terminal. Figure 4 shows a
similar circuit for the MAX5161.
Adjustable Gain
Figure 5 shows how to use the MAX5161 to digitally
adjust the gain of a noninverting op amp configuration.
Connect the MAX5161 in series with a resistor to ground
to form the adjustable gain control of a noninverting
amplifier. The MAX5160/MAX5161 have a low 5ppm/°C
ratiometric tempco that allows for a very stable adjust-
able gain configuration over temperature.
Serial Interface
Figure 6 is the serial-interface timing diagram.
Low-Power Digital Potentiometers
6 _______________________________________________________________________________________
GAIN 6
30V
W
L
H
INC
CS
GND
+5V
+5V
VOUT
VDD
U/D
MAX5160
Figure 3. MAX5160 Positive LCD Bias Control
GAIN 6
30V
L
H
GND
+5V+5V
VOUT
VDD
INC
U/D
MAX5161
Figure 4. MAX5161 Positive LCD Bias Control
VCC
L
H
GND
VIN
+5V
a) b)
VOUT
VDD
INC
U/D
VCC
LH
W
VIN
VOUT
MAX5161
MAX5160
Figure 5. Adjustable Gain Circuit: a) MAX5161; b) MAX5160
Chip Information
TRANSISTOR COUNT: 969
MAX5160/MAX5161
Low-Power Digital Potentiometers
_______________________________________________________________________________________ 7
H +L
H
LL
OL
L OL
RW
O
INC
X
U/D
xx-X
CS
H
CS
INC
U/D
W
t
CI
t
IL
t
DI
t
IH
t
IC
t
ID
t
IW
Figure 6. Serial-Interface Timing Diagram
Truth Table
X = Don’t care
O = Previous state
+ = Increment
= Decrement
= High-to-Low Transition
=Low-to-High Transition
MAX5160/MAX5161
Low-Power Digital Potentiometers
8 _______________________________________________________________________________________
Package Information
8LUMAXD.EPS
MAX5160/MAX5161
Low-Power Digital Potentiometers
Package Information (continued)
6 LEAD THIN SOT23.EPS
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________9
© 2001 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Maxim Integrated:
MAX5161MEZT+T MAX5161LEZT+TG071 MAX5160LEUA+ MAX5160MEUA+ MAX5160NEUA+
MAX5161LEZT+T MAX5161NEZT+T MAX5160LEUA+T MAX5160MEUA+T MAX5160NEUA+T MAX5160LEUA
MAX5160LEUA-T