DIP
H
H–13
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ckswitches.com
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
Specifications
SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12
positions
CONTACT RATING:
Carry: 100 mA @ 50 V DC max.
Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max.
MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break
cycles at full load, each circuit.
CONTACT RESISTANCE: Below 50 milliohms typ. initial
@ 2-4 V DC, 100mA.
INSULATION RESISTANCE: 109 ohms min.
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between
adjacent terminals.
STORAGE TEMPERATURE: -40°C to 85°C.
OPERATING TEMPERATURE: -40°C to 85°C.
OPERATING FORCE: 100-700g inital.
SD Series
Low Profile DIP Switches
PACKAGING: Thru-hole switches supplied in rigid dispensing tubes
in full-tube quantities only: this may effect order quantity. Surface
mount switches available in tape and reel packaging by added ‘R’
to end of part number; 1,000 pieces per reel. Switch position 1
denotes pin number 1. All switch actuators in ‘OFF’ position,
standard.
Materials
CASE & COVER: (PPA), flame retardant (UL 94V-0)
ACTUATOR: Nylon, flame retardant (UL 94V-0)
CONTACTS: BeCu with gold plate.
TERMINALS: Bright tin-plated brass.
TERMINAL SEAL: All terminals insert molded.
TAPE SEAL: Polyimide.
Note: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Features/Benefits
Low profile design saves space
Thru-hole and surface mount
models
Tape and reel packaging available
Sealed with top tape
RoHS compliant
Typical Applications
Address switch for industrial
controls
Logic switching for computers
and peripherals
Function controlling for
numerous applications
Number
of Positions
SD02 SD07
SD03 SD08
SD04 SD09
SD05 SD10
SD06 SD12
Actuator
H0 Flush Actuator “OFF” position
H1 Extended Actuator “OFF” position
H2 Flush Actuator “ON” position
H3 Extended Actuator “ON” position
Terminations
S Gull wing
(None) PC ThruHole
Contact Material
B Gold 10µ IN
B1 Gold 30µ IN *
* Consult factory for availability
Process Seal
(None) Tape seal
D No tape seal
Packaging
(None) Tubes
R Tape and Reel
D
S
How To Order
The Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete
listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate
box.
DIP
H
18765432
ORIENTATION MARK
PEELABLE
TAPE SEAL
.300
(7,62)
.390
(9,91)
.010 TYP.
(0,25)
STANDOFF
.027
(0,70)
ACTUATOR
TRAVEL
.142
(3,62)
.263
(6,68)
DIM. 'A'
SEE CHART
.315 TYP.
(8,00)
.160
(4,06)
WITH
TAPE
.100 TYP.
(2,54)
.022 TYP.
(0,55)
.010 TYP.
(0,25)
ON
.243 TYP.
(6,17)
.044 MIN.
(1,12)
.100
(2,54)
TYP.
.435 MIN.
(11,05)
18765432
.010 TYP.
(0,25)
.023 TYP.
(0,60)
STANDOFF
.027
(0,70)
ACTUATOR
TRAVEL
.142
(3,62)
.263
(6,68)
DIM. 'A'
SEE CHART
.325 TYP.
(8,25)
.315 TYP.
(8,00)
.168 TYP.
(4,30)
.126 TYP.
(3,20)
.100 TYP.
(2,54)
.022 TYP.
(0,55)
.059 TYP.
(1,50)
.010 TYP.
(0,25)
ON
PEELABLE
TAPE SEAL
ORIENTATION MARK
.100
(2,54)
TYP.
.300 TYP.
(7,6)
Ø.038
(0,97)
TYP.
SD Series
Low Profile DIP Switches
Sealed Flush Actuator – With Top Tape, Surface Mount Terminals
Sealed Extended Actuator – With Top Tape, Thru-hole Terminals
RoHS NO. QUANTITY
PART NUMBER POS. DIM.
A’ PER TUBE
SD02H1B
2 .258 (6,55) 85
SD03H1B
3 .358 (9,09) 60
SD04H1B
4 .458 (11,63) 45
SD05H1B
5 .558 (14,17) 40
SD06H1B
6 .658 (16,71) 30
SD07H1B
7 .758 (19,25) 25
SD08H1B
8 .858 (21,79) 25
SD09H1B
9 .958 (24,33) 20
SD10H1B
10 1.058 (26,87) 20
SD12H1B
12 1.258 (31,95) 15
Schematic
SPST
RoHS NO. QUANTITY
PART NUMBER POS. DIM.
A’ PER TUBE
SD02H0SB
2 .258 (6,55) 85
SD03H0SB
3 .358 (9,09) 60
SD04H0SB
4 .458 (11,63) 45
SD05H0SB
5 .558 (14,17) 40
SD06H0SB
6 .658 (16,71) 30
SD07H0SB
7 .758 (19,25) 25
SD08H0SB
8 .858 (21,79) 25
SD09H0SB
9 .958 (24,33) 20
SD10H0SB
10 1.058 (26,87) 20
SD12H0SB
12 1.258 (31,95) 15
Schematic
SPST
Sealed Flush Actuator – With Top Tape, Thru-hole Terminals
Process sealed - withstands soldering and cleaning processes
18765432
.010 TYP.
(0,25)
.023 TYP.
(0,60)
STANDOFF
.027
(0,70)
ACTUATOR TRAVEL
.142
(3,62)
.263
(6,68)
DIM. 'A'
SEE CHART
.325 TYP.
(8,25)
.315 TYP.
(8,00)
.168 TYP.
(4,27)
.126 TYP.
(3,20)
.100 TYP.
(2,54)
.022 TYP.
(0,55)
.059 TYP.
(1,50)
ON
PEELABLE
TAPE SEAL
ORIENTATION MARK
.100
(2,54)
TYP.
.300 TYP.
(7,6)
Ø.038
(0,97)
TYP.
ROHS NO. QUANTITY
PART NUMBER POS. DIM.
A’ PER TUBE
SD02H0B
2 .258 (6,55) 85
SD03H0B
3 .358 (9,09) 60
SD04H0B
4 .458 (11,63) 45
SD05H0B
5 .558 (14,17) 40
SD06H0B
6 .658 (16,71) 30
SD07H0B
7 .758 (19,25) 25
SD08H0B
8 .858 (21,79) 25
SD09H0B
9 .958 (24,33) 20
SD10H0B
10 1.058 (26,87) 20
SD12H0B
12 1.258 (31,95) 15
Schematic
SPST
H–14
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ckswitches.com
Table applicable to “H0” and “H2” actuator options.
Table applicable to “H1” and “H3” actuator options.
Table applicable to “H0” and “H2” actuator options.
DIP
H
H–15
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ckswitches.com
TAPE & REEL PACKAGING – SURFACE MOUNT OPTIONS ONLY
SD Series
Low Profile DIP Switches
FEED DIRECTION
DIM ‘D’
SEE
CHART
DIM ‘C’
SEE CHART
DIM ‘G’
SEE CHART
.069
(1,75)
DIM ‘P’
SEE CHART
.061 DIA
(1,55)
DIM ‘B’
SEE
CHART
.079
(2,00)
.057
(4,00)
DIM ‘A
SEE CHART ELONGATED HOLES ON
SD07-SD12 ONLY
SWITCH NO.
DIM ’A
POCKET
LENGTH
@ BOTTOM
DIM ’B’
POCKET
LENGTH
@ BOTTOM
DIM ’C’
TAPE
WIDTH
DIM ’D’
POCKET
DEPTH
DIM ’G’
SPROCKET
HOLE
SPACING
DIM ’P’
PITCH
BETWEEN
POCKETS
SD02
SD03
SD04
SD05
SD06
SD07
SD08
SD09
SD10
SD12
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.472(12,0)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
.177(4,5)
N/A
N/A
N/A
N/A
N/A
1.118(28,4)
1.591(40,4)
1.591(40,4)
1.591(40,4)
1.591(40,4)
.413(10,5)
.406(10,3)
.429(10,9)
.406(10,3)
.406(10,3)
.406(10,3)
.406(10,3)
.406(10,3)
.406(10,3)
.406(10,3)
.630(16,0)
.630(16,0)
.954(24,0)
.954(24,0)
.954(24,0)
1.260(32,0)
1.732(44,0)
1.732(44,0)
1.732(44,0)
1.732(44,0)
.315(8,0)
.406(10,3)
.476(12,1)
.602(15,3)
.701(17,8)
.803(20,4)
.854(21,7)
1.028(26,1)
1.055(26,8)
1.303(33,1)
Reel Information
Outside diameter 13.00 (333,0)
Pilot hole .512 (13,0)
RoHS NO. QUANTITY
PART NUMBER POS. DIM.
A’ PER REEL
SD02H0SBR
2 .258 (6,55) 1000
SD03H0SBR
3 .358 (9,09) 1000
SD04H0SBR
4 .458 (11,63) 1000
SD05H0SBR
5 .558 (14,17) 1000
SD06H0SBR
6 .658 (16,71) 1000
SD07H0SBR
7 .758 (19,25 1000
SD08H0SBR
8 .858 (21,79) 1000
SD09H0SBR
9 .958 (24,33) 1000
SD10H0SBR
10 1.058 (26,87) 1000
SD12H0SBR
12 1.258 (31,95) 1000
Schematic
SPST
18765432
ORIENTATION MARK
PEELABLE
TAPE SEAL
.300
(7,62)
.390
(9,91)
.010 TYP.
(0,25)
STANDOFF
.027
(0,70)
ACTUATOR
TRAVEL
.142
(3,62)
.263
(6,68)
DIM. 'A'
SEE CHART
.315 TYP.
(8,00)
.170
(4,31)
WITH
TAPE
.100 TYP.
(2,54)
.022 TYP.
(0,55)
.010 TYP.
(0,25)
.243 TYP.
(6,17)
.044 MIN.
(1,12)
.100
(2,54)
TYP.
.435 MIN.
(11,05)
ON
.010 TYP.
(0,25)
Sealed Extended Actuator – With Top Tape, Surface Mount Terminals
RoHS NO. QUANTITY
PART NUMBER POS. DIM.
A’ PER TUBE
SD02H1SB
2 .258 (6,55) 85
SD03H1SB
3 .358 (9,09) 60
SD04H1SB
4 .458 (11,63) 45
SD05H1SB
5 .558 (14,17) 40
SD06H1SB
6 .658 (16,71) 30
SD07H1SB
7 .758 (19,25 25
SD08H1SB
8 .858 (21,79) 25
SD09H1SB
9 .958 (24,33) 20
SD10H1SB
10 1.058 (26,87) 20
SD12H1SB
12 1.258 (31,95) 15
Schematic
SPST
Table applicable to “H1” and “H3” actuator options.
Table applicable to “H0” and “H2” actuator options.