3-terminal Filters, SMD Array For high-speed signal line(Cellular band compatible) MEA series Type: MEA1210D MEA1210PH MEA1608PH 1210[0504 inch]* 1210[0504 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 * All specifications are subject to change without notice. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/3) Conformity to RoHS Directive 3-terminal Filters, SMD Array For High-Speed Signal Line(Cellular Band Compatible) MEA Series MEA1210D PRODUCT IDENTIFICATION FEATURES * Two circuits to one chip. * 0.5mm thick. * Post-filter processing, a base oval waveform signal. * Suited for high-speed signal lines. MEA (1) 1210 (2) D 301R T (3) (4) (5) (1)Series name (2)Dimensions LxW (3)Type name (4)Cutoff freguency 301R: 300MHz APPLICATIONS For LCD and camera signal lines in mobile phone. (6) (5)Packaging style T:Taping (6)TDK internal code TEMPERATURE RANGES Operating Storage(After mount) PACKAGING STYLE AND QUANTITIES -40 to +85C -40 to +85C Packaging style Taping Quantity 4000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW) 1.20.15 0.65 Marking 0.3 0.6 GND CH1 0.1min. 0.25 0.5 1.00.15 GND GND 0.1min. 0.250.1 GND CH2 0.50.1 0.650.05 0.15min. 0.350.1 0.9 1.8 Weight: 3.5mg Dimensions in mm Dimensions in mm ELECTRICAL CHARACTERISTICS Rated voltage (V)max. 10 10 10 Part No. MEA1210D301R MEA1210D401R MEA1210D501R Rated current (mA)max. 100 100 100 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS Cutoff frequency (MHz) 300 400 500 RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 0 -5 10s max. Attenuation (dB) -10 250 to 260C Natural cooling -15 230C -20 -25 180C -30 -35 -40 -45 10 150C MEA1210D301R MEA1210D401R MEA1210D501R 1000 100 Frequency (MHz) 10000 Preheating 60 to 120s Soldering 30 to 60s Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-06 / 20111130 / e9621_mea_signal_04 (2/3) Conformity to RoHS Directive 3-terminal Filters, SMD Array For High-Speed Signal Line(Cellular Band Compatible) MEA Series MEA1210PH FEATURES * 2-line LC filter are built in one chip for high-density circuit design. * 0.5mm low profile. * It is effective as a sensitivity suppression technique for mobile phones. * This product is suitable for the LCD signal lines in mobile phone. PRODUCT IDENTIFICATION MEA (1) 1210 (2) P H220 T (3) (4) (5) (6) APPLICATIONS For LCD and camera signal lines in mobile phone. (1)Series name (2)Dimensions LxW (3)Type name (4)Capacitance H220: 22pF TEMPERATURE RANGES PACKAGING STYLE AND QUANTITIES Operating Storage(After mount) Packaging style Taping -40 to +85C -40 to +85C (5)Packaging style T:Taping (6)TDK internal code Quantity 4000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW) 1.20.15 0.65 0.3 0.25 GND 0.1min. 0.6 GND 0.5 GND GND 1.00.15 0.250.1 Marking CH1 0.1min. CH2 0.50.1 0.650.05 0.15min. 0.350.1 0.9 1.8 Weight: 3.5mg Dimensions in mm Dimensions in mm ELECTRICAL CHARACTERISTICS Rated voltage (V)max. 6.3 6.3 6.3 Part No. MEA1210PH150 MEA1210PH220 MEA1210PH270 Rated current (mA)max. 100 100 100 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS Capacitance (pF) 15 22 27 Cutoff frequency (MHz) 400 400 400 RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 0 10s max. Attenuation (dB) -10 250 to 260C -20 -40 180C -50 -60 -70 10 Natural cooling 230C -30 150C MEA1210PH270T MEA1210PH150T MEA1210PH220T 1000 100 Frequency (MHz) Preheating 60 to 120s Soldering 30 to 60s 10000 Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-06 / 20111130 / e9621_mea_signal_04 (3/3) Conformity to RoHS Directive 3-terminal Filters, SMD Array For High-Speed Signal Line(Cellular Band Compatible) MEA Series MEA1608PH FEATURES * 4-line LC filter are built in one chip for high-density circuit design. * 0.5mm low profile. * It is effective as a sensitivity suppression technique for mobile phones. * This product is suitable for the LCD signal lines in mobile phone. * Support is provided for high-speed signals at a cutoff frequency of 400MHz. PRODUCT IDENTIFICATION MEA (1) 1608 (2) P H220 T (3) (4) (5) (6) (1)Series name (2)Dimensions LxW (3)Type name (4)Capacitance H220: 22pF APPLICATIONS For LCD and camera signal lines in mobile phone. (5)Packaging style T:Taping (6)TDK internal code PACKAGING STYLE AND QUANTITIES Packaging style Taping TEMPERATURE RANGES Operating Storage(After mount) -40 to +85C -40 to +85C Quantity 4000 pieces/reel 0.10min. SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW) 2.0 CH3 CH4 GND GND 0.40.05 0.40.05 0.40.05 0.04 0.50.1 0.4 0.15min. 0.20.1 0.15 GND GND CH2 0.025 CH1 0.2 to 0.25 0.15 to 0.2 0.5 0.35 0.20.1 Marking 0.80.1 1.60.1 0.35 Dimensions in mm Weight: 3.5mg Dimensions in mm ELECTRICAL CHARACTERISTICS Rated voltage (V)max. 6.3 6.3 6.3 Part No. MEA1608PH150 MEA1608PH220 MEA1608PH270 Rated current (mA)max. 100 100 100 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS Capacitance (pF) 15 22 27 Cutoff frequency (MHz) 400 400 400 RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 0 10s max. -10 Attenuation (dB) 250 to 260C -20 -30 -40 180C -50 -60 -70 10 Natural cooling 230C 150C MEA1608PH150T MEA1608PH220T MEA1608PH270T 1000 100 Frequency (MHz) Preheating 60 to 120s Soldering 30 to 60s 10000 Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application is considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 001-06 / 20111130 / e9621_mea_signal_04