• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
3-terminal Filters, SMD Array
For high-speed signal line(Cellular band compatible)
MEA series
Type:
Issue date:
MEA1210D 1210[0504 inch]*
MEA1210PH 1210[0504 inch]
MEA1608PH 1608[0603 inch]
* Dimensions Code JIS[EIA]
November 2011
• All specifications are subject to change without notice.
(1/3)
001-06 / 20111130 / e9621_mea_signal_04
3-terminal Filters, SMD Array
For High-Speed Signal Line(Cellular Band Compatible)
MEA Series MEA1210D
FEATURES
• Two circuits to one chip.
• 0.5mm thick.
• Post-filter processing, a base oval waveform signal.
• Suited for high-speed signal lines.
APPLICATIONS
For LCD and camera signal lines in mobile phone.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name (5)Packaging style T:Taping
(2)Dimensions L×W (6)TDK internal code
(3)Type name
(4)Cutoff freguency
301R: 300MHz
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW)
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
Conformity to RoHS Directive
Operating –40 to +85°C
Storage(After mount) –40 to +85°C
MEA 1210 D 301R T
(1) (2) (3) (4) (5) (6)
Packaging style Quantity
Taping 4000 pieces/reel
Part No. Rated voltage
(V)max.
Rated current
(mA)max.
Cutoff frequency
(MHz)
MEA1210D301R 10 100 300
MEA1210D401R 10 100 400
MEA1210D501R 10 100 500
0.65±0.05
Weight: 3.5mg
Dimensions in mm
1.0±0.15
0.5±0.1
GND
0.35±0.1 0.15min.
0.1min.
1.2±0.15
0.25±0.10.1min.
GND
Marking
GND
CH1 CH2
GND
Dimensions in mm
0.3
0.65
0.6 0.5
0.25
0.9
1.8
0
–10
–5
–15
–25
–30
–20
–35
–40
–45
Attenuation(dB)
10000
Frequency(MHz)
10 100 1000
MEA1210D301R
MEA1210D401R
MEA1210D501R
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(2/3)
001-06 / 20111130 / e9621_mea_signal_04
3-terminal Filters, SMD Array
For High-Speed Signal Line(Cellular Band Compatible)
MEA Series MEA1210PH
FEATURES
• 2-line LC filter are built in one chip for high-density circuit design.
• 0.5mm low profile.
• It is effective as a sensitivity suppression technique for mobile
phones.
• This product is suitable for the LCD signal lines in mobile phone.
APPLICATIONS
For LCD and camera signal lines in mobile phone.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name (5)Packaging style T:Taping
(2)Dimensions L×W (6)TDK internal code
(3)Type name
(4)Capacitance
H220: 22pF
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW)
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
Conformity to RoHS Directive
Operating –40 to +85°C
Storage(After mount) –40 to +85°C
MEA 1210 P H220 T
(1) (2) (3) (4) (5) (6)
Packaging style Quantity
Taping 4000 pieces/reel
Part No. Rated voltage
(V)max.
Rated current
(mA)max.
Capacitance
(pF)
Cutoff frequency
(MHz)
MEA1210PH150 6.3 100 15 400
MEA1210PH220 6.3 100 22 400
MEA1210PH270 6.3 100 27 400
0.65±0.05
Weight: 3.5mg
Dimensions in mm
1.0±0.15
0.5±0.1
GND
0.35±0.1 0.15min.
0.1min.
1.2±0.15
Marking
0.25±0.10.1min.
GND GND GND
CH1 CH2
Dimensions in mm
0.3
0.65
0.6
0.25
0.9
1.8
0.5
0
–10
–20
–30
–40
–50
–70
–60
Attenuation(dB)
10000
Frequency(MHz)
10 100 1000
MEA1210PH270T
MEA1210PH150T
MEA1210PH220T
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(3/3)
001-06 / 20111130 / e9621_mea_signal_04
3-terminal Filters, SMD Array
For High-Speed Signal Line(Cellular Band Compatible)
MEA Series MEA1608PH
FEATURES
• 4-line LC filter are built in one chip for high-density circuit design.
• 0.5mm low profile.
• It is effective as a sensitivity suppression technique for mobile
phones.
• This product is suitable for the LCD signal lines in mobile phone.
• Support is provided for high-speed signals at a cutoff frequency
of 400MHz.
APPLICATIONS
For LCD and camera signal lines in mobile phone.
TEMPERATURE RANGES
PRODUCT IDENTIFICATION
(1)Series name (5)Packaging style T:Taping
(2)Dimensions L×W (6)TDK internal code
(3)Type name
(4)Capacitance
H220: 22pF
PACKAGING STYLE AND QUANTITIES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN (REFLOW)
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
Conformity to RoHS Directive
Operating –40 to +85°C
Storage(After mount) –40 to +85°C
MEA 1608 P H220 T
(1) (2) (3) (4) (5) (6)
Packaging style Quantity
Taping 4000 pieces/reel
Part No. Rated voltage
(V)max.
Rated current
(mA)max.
Capacitance
(pF)
Cutoff frequency
(MHz)
MEA1608PH150 6.3 100 15 400
MEA1608PH220 6.3 100 22 400
MEA1608PH270 6.3 100 27 400
Weight: 3.5mg
Dimensions in mm
1.6±0.1
0.8±0.1
0.10min.
0.5±0.1
0.2±0.1
GND GND
0.2±0.1 0.15min.
0.4±0.050.4±0.05 0.4±0.05
Marking
CH2
GND
GND
CH1 CH4CH3
0.2 to 0.25
2.0
0.025
0.15
0.5 0.35
0.15 to 0.2
0.4 0.04
0.35
Dimensions in mm
0
–10
–20
–30
–40
–50
–60
–70
Attenuation(dB)
10000
Frequency(MHz)
10 100 1000
MEA1608PH150T
MEA1608PH220T
MEA1608PH270T
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
