HEWLETT iy PACKARD SOLID STATE LAMPS Ce COMPONENTS Features WIRE WRAPPABLE EASILY PANEL MOUNTABLE; CLIP AVAILABLE STURDY WELDABLE LEADS: ON 2.54mm (0.10) CENTERS HIGH BRIGHTNESS OVER A WIDE VIEWING ANGLE RUGGED CONSTRUCTION FOR EASE OF HANDLING iC COMPATIBLE/LOW POWER CONSUMPTION LONG LIFE Description Wire Wrappable The 5082-4880 series is designed to be wire wrapped with the Gardner Denver Models 14R2, 14XL1, and 1AXA2 or equivalent. The LED can 9e panel or PC rnourtted and the leads directly wire wrapped without the use of a socket. Light Output Selection The 5082-4880 series is available with graded light output levels, so you can select the proper uniform light level for your application. Lens Appearance The 5082-4880 series is available in three different lens configurations. These are Red Diffused, Untinted Dif- fused, and Clear. The Red Diffused lens provides an excetlent off/on contrast ratio. The Clear lens is designed for appli- cations where a point source is desired. It is particularly useful where the light must be focused or diffused with external optics. The Untintec Diffused lens ts useful in masking the red color in the off condition. = GOUOR DOT CATHODE WOENTIFICATION Li ce \ 5.08 (200) 432.0170) fated B44 960) \ METAL. BASE PLASTIC \ CATHODE DIMENSIONS IN MILLIMETERS AND {INCHES} LED SELECTION GUIDE MINIMUM LENS TYPE LIGHT Red Clear Untinted OUTPUT Diffused Plastic Diffused (med) Lens Lens Lens 0.5 5082-4880 |. 5082-4883 | 5082-4886 1.0 5062-4881 | 5082-4884 | 5082-49887 1.6 5082-4882 | 5082-4885 -|:.5082-4888 31Absolute Maximum Ratings at T,=25C DC Power Dissipation ..........-. 100 mW DC Forward Current. . 2. 2 2. 2 ee 50mA Peak Forward Current... . . . 1 Amp (1 usec pulse width, 300 pps) Electrical Characteristics at Ty=25C Isolation Voltage (between lead and case) . . Lead Soldering Temperature . . . . 300V Operating and Storage Temperature Range... . . . 55C to +100C . 230C for 7 sec 5082 - 4880 502 - 4881 5082 - 4883 5082 - 4884 Symbol Parameters 5OB2 - 4886 = 8082 - 4887 Min; ly Luminous Intensity. Os ly Luminous Intensity \PEAK | Wavelength Te Speed.of Response Capacitance G46 Thermal Resistance Ve Forward Voltage BVp Reverse Break- down Voltage 3 6082 - A882 2-4 ae S nee Units Test.Conditions. _.Max. : je mcd tee 20: mA med [p= 10 mA nm Measurement at Pak ns pF o,/W. | Junction te Cathode Lead 2.0 Vv tp = 20:mA Vv tp = 10 MA TYPICAL RELATIVE LUMINOUS INTENSITY VERSUS ANGULAR DISPLACEMENT 4880, 4881, 4882 30 20 10 o 10 20 30 30 4883, 4884, 4885 2 100" a 4886, 4887, 4888 30 30 20 10 or 10 20 30 50 40 30 20 {, FORWARD CURRENT mA 0 0 0.4 0.8 1.2 1.6 2.0 FORWARD CURRENT -- VOLTAGE CHARACTERISTICS Figure 1. Forward Current vs. Voltage Characteristic. RELATIVE LUMINUUS INTENSITY, 2.50 2.25 2.00 1.75 1.50 1.00 75 -50 25 0 10 20 30 40 50 Ip FORWARD CURRENT mA Figure 2. Luminous Intensity vs. Forward Current (IF). 32