TVS Diodes Surface Mount - 3000W > SMDJ-HR series SMDJ-HR Series RoHS Pb e3 Description Uni-directional Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY Agency Recognition E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Peak Pulse Power Dissipation by 10/1000s waveform (Note 1), (Note 2) Symbol Value Unit PPPM 3000 W Power Dissipation on infinite heat sink at TL=50C PD 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only VF 3.5 V TJ , TSTG -65 to 150 C Typical Thermal Resistance Junction to Lead RJL 15 C/W Typical Thermal Resistance Junction to Ambient RJA 75 C/W Operating Junction and Storage Temperature Range * 3000W peak pulse power capability at 10/1000s waveform, repetition rate (duty cycles):0.01% * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * VBR @ TJ= VBR@25C x (1+T x (TJ - 25)) (T:Temperature Coefficient, typical value is 0.1%) * Glass passivated chip junction * Fast response time: typically less than 1.0ps from 0V to VBR min * Excellent clamping capability * Low incremental surge resistance * Typical IR 2A for VR >10V * Meet MSL level1, per J-STD-020, LF maximun peak of 260C * UL Recognized compound meeting flammability rating V-0. * Matte tin lead-free plated * Halogen free and RoHS compliant * Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Notes: 1. Non-repetitive current pulse per Fig. 2 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31" (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle=4 per minute maximum. Functional Diagram Bi-directional Cathode Anode Uni-directional (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Electrical Characteristics Part Number (Uni) Part Number (Bi) SMDJ5.0A-HR SMDJ6.0A-HR SMDJ6.5A-HR SMDJ7.0A-HR SMDJ7.5A-HR SMDJ8.0A-HR SMDJ8.5A-HR SMDJ9.0A-HR SMDJ10A-HR SMDJ11A-HR SMDJ12A-HR SMDJ13A-HR SMDJ14A-HR SMDJ15A-HR SMDJ16A-HR SMDJ17A-HR SMDJ18A-HR SMDJ20A-HR SMDJ22A-HR SMDJ24A-HR SMDJ26A-HR SMDJ28A-HR SMDJ30A-HR SMDJ33A-HR SMDJ36A-HR SMDJ40A-HR SMDJ43A-HR SMDJ45A-HR SMDJ48A-HR SMDJ51A-HR SMDJ54A-HR SMDJ58A-HR SMDJ60A-HR SMDJ64A-HR SMDJ70A-HR SMDJ75A-HR SMDJ78A-HR SMDJ85A-HR SMDJ90A-HR SMDJ100A-HR SMDJ110A-HR SMDJ120A-HR SMDJ130A-HR SMDJ150A-HR SMDJ5.0CA-HR SMDJ6.0CA-HR SMDJ6.5CA-HR SMDJ7.0CA-HR SMDJ7.5CA-HR SMDJ8.0CA-HR SMDJ8.5CA-HR SMDJ9.0CA-HR SMDJ10CA-HR SMDJ11CA-HR SMDJ12CA-HR SMDJ13CA-HR SMDJ14CA-HR SMDJ15CA-HR SMDJ16CA-HR SMDJ17CA-HR SMDJ18CA-HR SMDJ20CA-HR SMDJ22CA-HR SMDJ24CA-HR SMDJ26CA-HR SMDJ28CA-HR SMDJ30CA-HR SMDJ33CA-HR SMDJ36CA-HR SMDJ40CA-HR SMDJ43CA-HR SMDJ45CA-HR SMDJ48CA-HR SMDJ51CA-HR SMDJ54CA-HR - UNI BI Reverse Stand off Voltage VR (Volts) RDE RDG RDK PDM PDP PDR PDT PDV PDX PDZ PEE PEG PEK PEM PEP PER PET PEV PEX PEZ PFE PFG PFK PFM PFP PFR PFT PFV PFX PFZ RGE PGG PGK PGM PGP PGR PGT PGV PGX PGZ PHE PHG PHK PHM DDE DDG DDK DDM DDP DDR DDT DDV DDX DDZ DEE DEG DEK DEM DEP DER DET DEV DEX DEZ DFE DFG DFK DFM DFP DFR DFT DFV DFX DFZ DGE - 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 Marking Breakdown Voltage VBR (Volts) @ IT MIN MAX 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 Test Maximum Maximum Maximum Agency Peak Reverse Current Clamping Approval Voltage VC Pulse Leakage IR IT @ Ipp Current Ipp @ VR (mA) (V) (A) (A) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 326.1 291.3 267.9 250.0 232.6 220.6 208.3 194.8 176.5 164.8 150.8 139.5 129.3 123.0 115.4 108.7 102.7 92.6 84.5 77.1 71.3 66.1 62.0 56.3 51.6 46.5 43.2 41.3 38.8 36.4 34.4 32.1 31.0 29.1 26.5 24.8 23.8 21.9 20.5 18.5 16.9 15.5 14.4 12.3 800 800 500 200 100 50 20 10 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. 2. Each lot of parts will pass group B test requirements. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Screen Process 100% Vision Inspection MIL-STD-750 method 2074 100% High Temperature Storage Life (168hrs,175C) MIL-STD-750 method 1031 100% X-RAY inspection MIL-STD-750 method 2076 100% Temperature Cycle Test (-55 to150C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Reflow (2X) JEDEC J-STD-020 100% Surge Test (2x) MIL-STD-750 method 4066 100% HTRB 150C Bias=VR(80% breakdown voltage, 96hrs, and each direction 96hrs for Bi-directional products) MIL-STD-750 method 1038 Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer's request via contacting Littlefuse service Group B Test Requirements Screen Surge test Burn - In (HTRB) Method Condition Requirement 10/1000 s Peak Pulse Waveform Maximum clamping Voltage (VC) @ Peak Pulse Current (IPP) Sample Size 45 perform 10x Accept 0 failures MIL -STD-750, Method 1038.5 Applied voltage 100% VR@150C Sample size 45 340 hours (680 hours for bidirection products, each direction 340 hours) Accept 0 failures -- IR@VR, V(BR)@IT Sample size 45 Accept 0 failures Electrical test I-V Curve Characteristics Uni-directional Bi-directional Ipp Vc VBR VR IR VF IT Ipp PPPM VR VBR VC IR VF V Vc VBR VR IT IR IR IT VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Ratings and Characteristic Curves (T =25C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating 1000 PPPM-Peak Pulse Power (kW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS 100 10 1 0.31x0.31" (8.0x8.0mm) Copper Pad Area 0.1 0.001 0.01 10 0.1 1 td-Pulse Width (ms) Time Figure 4 - Pulse Waveform Figure 3 - Pulse Derating Curve 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (C) tr=10sec PM(AV), Steady Sate Power Dissipation (W) Cj(pF) Bi-direconal V=0V Uni-direconal V=VR Bi-direconal V=VR 10 1 1 10 100 VBR - Reverse Breakdown Voltage(V) 2 10/1000sec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 Figure 6 - Steady State Power Derating Curve Uni-direconal V=0V 100 ( ) 50 0 100000 1000 Half Value IPPM IPPM t-Time (ms) Figure 5 - Typical Junction Capacitance 10000 Peak Value IPPM 100 175 TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 1000 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature(C) (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional only IFSM - Peak Forward Surge Current (A) 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz Soldering Parameters Lead-free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds 260 Time within 5C of actual peak Temperature (tp) 20 - 40 seconds tL Critical Zone TL to TP Ts(max) Ts(min) Ramp-down ts Preheat 25C Peak Temperature (TP) +0/-5 tp TP Temperature (T) Reflow Condition t 25C to Peak Time (t) C Ramp-down Rate 6C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 260C Physical Specifications Environmental Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Weight 0.007 ounce, 0.21 grams Thermal Shock JESD22-A106 Case JEDEC DO214AB. Molded plastic body over glass passivated junction MSL JEDEC-J-STD-020, Level 1 Polarity Color band denotes positive end (cathode) except Bidirectional. H3TRB JESD22-A101 Terminal Matte Tin-plated leads, Solderable per JESD22-B102 RSH JESD22-A111 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Part Numbering System Part Marking System SMDJ XXX C A -HR Cathode Band F (for Uni-directional products only) HIGH RELIABILITY 5% VOLTAGE TOLERANCE XXX BI-DIRECTIONAL YMXXX VOLTAGE Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code SERIES Packaging Component Package Part number SMDJxxxXX-HR Quantity DO-214AB 500 Packaging Option Packaging Specification Tape & Reel - 16mm tape/7" reel EIA STD RS-481 Dimensions DO-214AB (SMC J-Bend) Cathode Band (for Uni-directional products only) Dimensions A C A B H D F E G J K L I Inches Millimeters Min Max Min Max 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F 0.002 0.008 0.051 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - 2.400 J 0.094 - K - 0.165 L 0.094 - 4.200 2.400 - Solder Pads (all dimensions in mm) (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 (8.0) 0.059 DIA (1.5) Cover tape 7.0 (187) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) RTCA/DO-160G Wave 3 Dimensions are in inches (and millimeters). Direction of Feed RTCA/DO-160G Wave 4 Notes: 1. Voltage and current are not required to be in phase. 2. The waveshape may have either a damped sine or cosine waveshape. RTCA/DO-160G Wave 5 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 TVS Diodes Surface Mount - 3000W > SMDJ-HR series Pin Injection Protection Per RTCA/DO-160G 25C Part Number (Uni) SMDJ5.0A-HR SMDJ6.0A-HR SMDJ6.5A-HR SMDJ7.0A-HR SMDJ7.5A-HR SMDJ8.0A-HR SMDJ8.5A-HR SMDJ9.0A-HR SMDJ10A-HR SMDJ11A-HR SMDJ12A-HR SMDJ13A-HR SMDJ14A-HR SMDJ15A-HR SMDJ16A-HR SMDJ17A-HR SMDJ18A-HR SMDJ20A-HR SMDJ22A-HR SMDJ24A-HR SMDJ26A-HR SMDJ28A-HR SMDJ30A-HR SMDJ33A-HR SMDJ36A-HR SMDJ40A-HR SMDJ43A-HR SMDJ45A-HR SMDJ48A-HR SMDJ51A-HR SMDJ54A-HR SMDJ58A-HR SMDJ60A-HR SMDJ64A-HR SMDJ70A-HR SMDJ75A-HR SMDJ78A-HR SMDJ85A-HR SMDJ90A-HR SMDJ100A-HR SMDJ110A-HR SMDJ120A-HR SMDJ130A-HR SMDJ150A-HR Part Number (Bi) SMDJ5.0CA-HR SMDJ6.0CA-HR SMDJ6.5CA-HR SMDJ7.0CA-HR SMDJ7.5CA-HR SMDJ8.0CA-HR SMDJ8.5CA-HR SMDJ9.0CA-HR SMDJ10CA-HR SMDJ11CA-HR SMDJ12CA-HR SMDJ13CA-HR SMDJ14CA-HR SMDJ15CA-HR SMDJ16CA-HR SMDJ17CA-HR SMDJ18CA-HR SMDJ20CA-HR SMDJ22CA-HR SMDJ24CA-HR SMDJ26CA-HR SMDJ28CA-HR SMDJ30CA-HR SMDJ33CA-HR SMDJ36CA-HR SMDJ40CA-HR SMDJ43CA-HR Wave 3 70C Wave 4 (6.4/69us) L5 L3 128A 60A L5 L3 L4 L5 120C Wave 4 (6.4/69us) L3 60A pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass L5 pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass L3 L4 pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - L4 Wave 5a (40/120us) L5 60A L4 Wave 4 (6.4/69us) 128A 150A 320A 300A 750A 128A L3 Wave 5a Wave (40/120us) 3 150A 320A 300A 750A pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass L4 Wave 5a Wave (40/120us) 3 L5 L3 L4 150A 320A 300A 750A pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass - - pass pass pass pass pass pass pass - - - pass pass pass pass pass pass - - - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass - - - - - - - - - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass SMDJ45CA-HR SMDJ48CA-HR SMDJ51CA-HR SMDJ54CA-HR pass pass pass pass - pass pass pass pass pass pass pass pass pass pass pass pass - - - - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass pass pass pass - - - - pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass - - - - pass pass - - - - - pass pass Note: 1. L1 = Level1, L2 = Level 2, L3 = Level 3, L4 = Level 4, L5 = Level 5 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/07/18 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: SMDJ9.0CA-HR SMDJ45.0CA-HR SMDJ170.0CA-HR SMDJ18.0A-HR SMDJ13.0CA-HR SMDJ14.0CA-HR SMDJ160.0A-HR SMDJ110.0CA-HR SMDJ18.0CA-HR SMDJ90.0CA-HR SMDJ170.0A-HR SMDJ36.0A-HR SMDJ7.0A-HR SMDJ11.0CA-HR SMDJ15.0A-HR SMDJ7.0CA-HR SMDJ26.0CA-HR SMDJ64.0CA-HR SMDJ7.5AHR SMDJ70.0A-HR SMDJ11.0A-HR SMDJ120.0A-HR SMDJ5.0CA-HR SMDJ120.0CA-HR SMDJ26.0A-HR SMDJ10.0A-HR SMDJ12.0A-HR SMDJ51.0CA-HR SMDJ60.0A-HR SMDJ78.0A-HR SMDJ5.0A-HR SMDJ75.0CAHR SMDJ8.0CA-HR SMDJ33.0A-HR SMDJ12.0CA-HR SMDJ9.0A-HR SMDJ22.0A-HR SMDJ130.0A-HR SMDJ40.0CA-HR SMDJ75.0A-HR SMDJ17.0CA-HR SMDJ10.0CA-HR SMDJ58.0A-HR SMDJ43.0CA-HR SMDJ100.0CA-HR SMDJ6.0A-HR SMDJ20.0A-HR SMDJ17.0A-HR SMDJ8.5CA-HR SMDJ30.0CA-HR SMDJ85.0AHR SMDJ30.0A-HR SMDJ40.0A-HR SMDJ6.5CA-HR SMDJ48.0CA-HR SMDJ70.0CA-HR SMDJ7.5CA-HR SMDJ36.0CA-HR SMDJ54.0A-HR SMDJ110.0A-HR SMDJ160.0CA-HR SMDJ16.0CA-HR SMDJ150.0CA-HR SMDJ14.0A-HR SMDJ24.0A-HR SMDJ8.5A-HR SMDJ90.0A-HR SMDJ33.0CA-HR SMDJ20.0CA-HR SMDJ24.0CAHR SMDJ130.0CA-HR SMDJ28.0A-HR SMDJ16.0A-HR SMDJ45.0A-HR SMDJ100.0A-HR SMDJ6.5A-HR SMDJ13.0A-HR SMDJ150.0A-HR SMDJ43.0A-HR SMDJ48.0A-HR SMDJ22.0CA-HR SMDJ54.0CA-HR SMDJ8.0AHR SMDJ60.0CA-HR SMDJ85.0CA-HR SMDJ78.0CA-HR SMDJ15.0CA-HR SMDJ28.0CA-HR SMDJ64.0A-HR SMDJ51.0A-HR