TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
AGENCY Agency Recognition
E230531
The SMDJ-HR High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Description
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Agency Approvals
Parameter Symbol Value Unit
Peak Pulse Power Dissipation by
10/1000µs waveform (Note 1),
(Note 2)
PPPM 3000 W
Power Dissipation on infinite heat
sink at TL=50°C PD6.5 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3) IFSM 300 A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
VF3.5 V
Operating Junction and Storage
Temperature Range TJ, TSTG -65 to 150 °C
Typical Thermal Resistance Junction
to Lead RƟJL 15 °C/W
Typical Thermal Resistance Junction
to Ambient RƟJA 75 °C/W
Notes:
1. Non-repetitive current pulse per Fig. 2 and derated above TA = 25OC per Fig. 3.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
component only, duty cycle=4 per minute maximum.
TVS components are ideal for the protection of I/O
Interfaces, VCC bus and other vulnerable circuits used in
Telecom, Computer, Industrial and Consumer electronic
applications.
Applications
Features
• 3000W peak pulse power
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• For surface mounted
applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• VBR @ TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Glass passivated chip
junction
• Fast response time:
typically less than 1.0ps
from 0V to VBR min
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical IR ≤ 2μA for VR
>10V
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
• UL Recognized compound
meeting flammability
rating V-0.
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd level
interconnect is Pb-free
and the terminal finish
material is tin(Sn) (IPC/
JEDEC J-STD-609A.01)
SMDJ-HR Series
Functional Diagram
Bi-directional
Uni-directional
Cathode Anode
Uni-directional
Bi-directional
RoHS
e3
Pb
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Marking
Reverse
Stand off
Voltage
VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
(mA)
Maximum
Clamping
Voltage VC
@ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage IR
@ VR
(µA)
Agency
Approval
UNI BI MIN MAX
SMDJ5.0A-HR SMDJ5.0CA-HR RDE DDE 5.0 6.40 7. 0 0 10 9.2 326.1 800 X
SMDJ6.0A-HR SMDJ6.0CA-HR RDG DDG 6.0 6.67 7.37 10 10.3 291.3 800 X
SMDJ6.5A-HR SMDJ6.5CA-HR RDK DDK 6.5 7.22 7.98 10 11. 2 267.9 500 X
SMDJ7.0A-HR SMDJ7.0CA-HR PDM DDM 7. 0 7.78 8.60 10 12.0 250.0 200 X
SMDJ7.5A-HR SMDJ7.5CA-HR PDP DDP 7. 5 8.33 9.21 1 12.9 232.6 100 X
SMDJ8.0A-HR SMDJ8.0CA-HR PDR DDR 8.0 8.89 9.83 1 13.6 220.6 50 X
SMDJ8.5A-HR SMDJ8.5CA-HR PDT DDT 8.5 9.44 10.40 1 14.4 208.3 20 X
SMDJ9.0A-HR SMDJ9.0CA-HR PDV DDV 9.0 10.00 11. 10 1 15.4 194.8 10 X
SMDJ10A-HR SMDJ10CA-HR PDX DDX 10.0 11. 10 12.30 1 1 7. 0 176.5 5 X
SMDJ11A-HR SMDJ11CA-HR PDZ DDZ 11. 0 12.20 13.50 1 18.2 164.8 2 X
SMDJ12A-HR SMDJ12CA-HR PEE DEE 12.0 13.30 14.70 1 19.9 150.8 2 X
SMDJ13A-HR SMDJ13CA-HR PEG DEG 13.0 14.40 15.90 1 21.5 139.5 2 X
SMDJ14A-HR SMDJ14CA-HR PEK DEK 14.0 15.60 17.20 1 23.2 129.3 2 X
SMDJ15A-HR SMDJ15CA-HR PEM DEM 15.0 16.70 18.50 1 24.4 123.0 2 X
SMDJ16A-HR SMDJ16CA-HR PEP DEP 16.0 17.80 19.70 1 26.0 115.4 2 X
SMDJ17A-HR SMDJ17CA-HR PER DER 1 7. 0 18.90 20.90 1 27.6 108.7 2 X
SMDJ18A-HR SMDJ18CA-HR PET DET 18.0 20.00 22.10 1 29.2 102.7 2 X
SMDJ20A-HR SMDJ20CA-HR PEV DEV 20.0 22.20 24.50 1 32.4 92.6 2 X
SMDJ22A-HR SMDJ22CA-HR PEX DEX 22.0 24.40 26.90 1 35.5 84.5 2 X
SMDJ24A-HR SMDJ24CA-HR PEZ DEZ 24.0 26.70 29.50 1 38.9 77.1 2 X
SMDJ26A-HR SMDJ26CA-HR PFE DFE 26.0 28.90 31.90 1 42.1 71.3 2 X
SMDJ28A-HR SMDJ28CA-HR PFG DFG 28.0 31.10 34.40 1 45.4 66.1 2 X
SMDJ30A-HR SMDJ30CA-HR PFK DFK 30.0 33.30 36.80 1 48.4 62.0 2 X
SMDJ33A-HR SMDJ33CA-HR PFM DFM 33.0 36.70 40.60 1 53.3 56.3 2 X
SMDJ36A-HR SMDJ36CA-HR PFP DFP 36.0 40.00 44.20 1 58.1 51.6 2 X
SMDJ40A-HR SMDJ40CA-HR PFR DFR 40.0 44.40 49.10 1 64.5 46.5 2 X
SMDJ43A-HR SMDJ43CA-HR PFT DFT 43.0 47.80 52.80 1 69.4 43.2 2 X
SMDJ45A-HR SMDJ45CA-HR PFV DFV 45.0 50.00 55.30 1 72.7 41.3 2 X
SMDJ48A-HR SMDJ48CA-HR PFX DFX 48.0 53.30 58.90 1 77.4 38.8 2 X
SMDJ51A-HR SMDJ51CA-HR PFZ DFZ 51.0 56.70 62.70 1 82.4 36.4 2 X
SMDJ54A-HR SMDJ54CA-HR RGE DGE 54.0 60.00 66.30 1 87.1 34.4 2 X
SMDJ58A-HR - PGG - 58.0 64.40 71.20 1 93.6 32.1 2 X
SMDJ60A-HR - PGK - 60.0 66.70 73.70 1 96.8 31.0 2 X
SMDJ64A-HR - PGM - 64.0 71.10 78.60 1 103.0 29.1 2 X
SMDJ70A-HR - PGP - 70.0 77.80 86.00 1 113.0 26.5 2 X
SMDJ75A-HR - PGR - 75.0 83.30 92.10 1 121.0 24.8 2 X
SMDJ78A-HR - PGT - 78.0 86.70 95.80 1 126.0 23.8 2 X
SMDJ85A-HR - PGV - 85.0 94.40 104.00 1 137.0 21.9 2 X
SMDJ90A-HR - PGX - 90.0 100.00 111.0 0 1 146.0 20.5 2 X
SMDJ100A-HR - PGZ - 100.0 111.0 0 123.00 1 162.0 18.5 2 X
SMDJ110A-HR - PHE - 110.0 122.00 135.00 1 177.0 16.9 2 X
SMDJ120A-HR - PHG - 120.0 133.00 147.00 1 193.0 15.5 2 X
SMDJ130A-HR - PHK - 130.0 144.00 159.00 1 209.0 14.4 2 X
SMDJ150A-HR - PHM - 150.0 167.00 185.00 1 243.0 12.3 2 X
Note:
1. For bidirectional type having VR of 10 volts and less, the IR limit is double.
2. Each lot of parts will pass group B test requirements.
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
Vc VBR VR
IR
IT
Ipp
V
Uni-directional
VF
Vc VBR VR
IR
IT
Ipp
V
Vc
VBR
VR
Ipp
IR
IT
Bi-directional
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Group B Test Requirements
Screen Method Condition Requirement
Surge test 10/1000 µs Peak
Pulse Waveform
Maximum clamping
Voltage (VC) @ Peak
Pulse Current (IPP)
Sample Size 45 perform 10x
Accept 0 failures
Burn - In
(HTRB)
MIL -STD-750,
Method 1038.5
Applied voltage
100% VR@150°C
Sample size 45
340 hours (680 hours for bi-
direction products, each direction
340 hours)
Accept 0 failures
Electrical test -- IR@VR, V(BR)@IT
Sample size 45
Accept 0 failures
I-V Curve Characteristics
Screen Process
100% Vision Inspection MIL-STD-750 method 2074
100% High Temperature Storage Life (168hrs,175°C) MIL-STD-750 method 1031
100% X-RAY inspection MIL-STD-750 method 2076
100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051
100% Reflow (2X) JEDEC J-STD-020
100% Surge Test (2x) MIL-STD-750 method 4066
100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each
direction 96hrs for Bi-directional products) MIL–STD–750 method 1038
Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011
Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0255075100 125150 175
P
M(AV)
, Steady Sate Power
Dissipation (W)
T
A
- Ambient Temperature(ºC)
Figure 4 - Pulse Waveform
Figure 5 - Typical Junction Capacitance Figure 6 - Steady State Power Derating Curve
Voltage Transients
Time
Voltage Across TVS
Current Through TVS
Voltage or Current
Figure 1 - TVS Transients Clamping Waveform
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 2 - Peak Pulse Power Rating
0.1
1
10
100
1000
0.001 0.01 0.11
P
PPM
-Peak Pulse Power (kW)
10
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
t
d
-Pulse Width (ms)
0
20
40
60
80
100
0255075100 125 175
Peak Pulse Power (P
PP
) or Current (I
PP
)
Derating in Percentage
%
150
T
J
- Initial Junction Temperature (ºC)
Figure 3 - Pulse Derating Curve
Cj(pF)
VBR
-Reverse Breakdown Voltage(V)
1
10
100
1000
10000
100000
110100 1000
Bi-direconal V=0V
Bi-direconal V=
V
R
Uni-direconal V=
V
R
Uni-direconal V=0V
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
Physical Specifications
Weight 0.007 ounce, 0.21 grams
Case JEDEC DO214AB. Molded plastic body
over glass passivated junction
Polarity Color band denotes positive end (cathode)
except Bidirectional.
Terminal Matte Tin-plated leads, Solderable per
JESD22-B102
Environmental Specifications
Soldering Parameters
Temperature (T)
Time (t)
Ts(min)
Ts(max)
TL
TP
ts
Preheat
tL
tp
Ramp-up Critical Zone
TL to TP
Ramp-down
t 25˚C to Peak
25˚C
Reflow Condition Lead–free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak 3°C/second max
TS(max) to TL - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 260°C
High Temp. Storage JESD22-A103
HTRB JESD22-A108
Thermal Shock JESD22-A106
MSL JEDEC-J-STD-020, Level 1
H3TRB JESD22-A101
RSH JESD22-A111
110100
Number of Cycles at 60 Hz
0
50
100
150
200
250
300
350
IFSM
- Peak Forward Surge Current
(A)
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional only
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
Part Numbering System
Packaging
Part number Component
Package Quantity Packaging
Option
Packaging
Specification
SMDJxxxXX-HR DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481
Part Marking System
VOLTAGE
BI-DIRECTIONAL
5% VOLTA GE TOLERANCE
SERIES
SMDJ -HR XXX CA
HIGH RELIABILITY
F
XXX
YMXXX
Marking Code
Trace Code Marking
Y:Year Code
M: Month Code
XXX: Lot Code
Littelfuse Logo
Cathode Band
(for Uni-directional products only
)
Dimensions
Dimensions Inches Millimeters
Min Max Min Max
A 0.114 0.126 2.900 3.200
B 0.260 0.280 6.600 7. 11 0
C 0.220 0.245 5.590 6.220
D 0.079 0.103 2.060 2.620
E 0.030 0.060 0.760 1.520
F 0.002 0.008 0.051 0.203
G 0.305 0.320 7.750 8.130
H 0.006 0.012 0.152 0.305
I 0.129 - 3.300 -
J 0.094 - 2.400 -
K - 0.165 4.200
L 0.094 - 2.400 -
(all dimensions in mm)
I
L
K
J
Solder Pads
DO-214AB (SMC J-Bend)
B
F
G
H
E
C
D
A
Cathode Band
(for Uni-directional products only)
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
Tape and Reel Specification
0.63
(16.0)
0.315
(8.0)
0.157
(4.0)
0.65
(16.4)
0.80 (20.2)
Arbor Hole Dia.
7.0 (187)
Dimensions are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5) Cover tape
Cathode
RTCA/DO-160G Wave 5
RTCA/DO-160G Wave 3
Notes:
1. Voltage and current are not required to be in phase.
2. The waveshape may have either a damped sine or cosine waveshape.
RTCA/DO-160G Wave 4
TVS Diodes
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/07/18
Surface Mount – 3000W > SMDJ-HR series
Part
Number
(Uni)
Part
Number
(Bi)
25C 70C 120C
Wave
3
Wave 4
(6.4/69us)
Wave 5a
(40/120us)
Wave
3
Wave 4
(6.4/69us)
Wave 5a
(40/120us)
Wave
3
Wave 4
(6.4/69us)
Wave 5a
(40/120us)
L5 L3 L4 L5 L3 L4 L5 L3 L4 L5 L3 L4 L5 L3 L4 L5 L3 L4
128A 60A 150A 320A 300A 750A 128A 60A 150A 320A 300A 750A 128A 60A 150A 320A 300A 750A
SMDJ5.0A-HR SMDJ5.0CA-HR pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass
SMDJ6.0A-HR SMDJ6.0CA-HR pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass
SMDJ6.5A-HR SMDJ6.5CA-HR pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass pass -
SMDJ7.0A-HR SMDJ7.0CA-HR pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass -
SMDJ7.5A-HR SMDJ7.5CA-HR pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass -
SMDJ8.0A-HR SMDJ8.0CA-HR pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass -
SMDJ8.5A-HR SMDJ8.5CA-HR pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass -
SMDJ9.0A-HR SMDJ9.0CA-HR pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass -
SMDJ10A-HR SMDJ10CA-HR pass pass pass pass pass pass pass pass pass pass pass - pass pass pass pass pass -
SMDJ11A-HR SMDJ11CA-HR pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - -
SMDJ12A-HR SMDJ12CA-HR pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - -
SMDJ13A-HR SMDJ13CA-HR pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - -
SMDJ14A-HR SMDJ14CA-HR pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - -
SMDJ15A-HR SMDJ15CA-HR pass pass pass pass pass - pass pass pass pass pass - pass pass pass pass - -
SMDJ16A-HR SMDJ16CA-HR pass pass pass pass pass - pass pass pass pass - - pass pass pass - - -
SMDJ17A-HR SMDJ17CA-HR pass pass pass pass pass - pass pass pass pass - - pass pass pass - - -
SMDJ18A-HR SMDJ18CA-HR pass pass pass pass pass - pass pass pass pass - - pass pass pass - - -
SMDJ20A-HR SMDJ20CA-HR pass pass pass pass pass - pass pass pass pass - - pass pass pass - - -
SMDJ22A-HR SMDJ22CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ24A-HR SMDJ24CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ26A-HR SMDJ26CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ28A-HR SMDJ28CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ30A-HR SMDJ30CA-HR pass pass pass - - - pass pass pass - - pass pass pass - - -
SMDJ33A-HR SMDJ33CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ36A-HR SMDJ36CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ40A-HR SMDJ40CA-HR pass pass pass - - - pass pass pass - - - pass pass pass - - -
SMDJ43A-HR SMDJ43CA-HR pass pass pass - - - pass pass pass - - - pass pass - - - -
SMDJ45A-HR SMDJ45CA-HR pass pass pass - - - pass pass - - - - pass pass - - - -
SMDJ48A-HR SMDJ48CA-HR pass pass pass - - - pass pass - - - - pass pass - - - -
SMDJ51A-HR SMDJ51CA-HR pass pass pass - - - pass pass - - - - pass pass - - - -
SMDJ54A-HR SMDJ54CA-HR pass pass pass - - - pass pass - - - - pass pass - - - -
SMDJ58A-HR - pass pass - - - - pass pass - - - - pass pass - - - -
SMDJ60A-HR - pass pass - - - - pass pass - - - - pass pass - - - -
SMDJ64A-HR - pass pass - - - - pass pass - - - - pass - - - - -
SMDJ70A-HR - pass pass - ---pass pass ----pass -----
SMDJ75A-HR - pass pass - - - - pass pass - - - - pass - - - - -
SMDJ78A-HR - pass pass - - - - pass pass - - - - pass - - - - -
SMDJ85A-HR - pass pass - - - - pass pass - - - - pass - - - - -
SMDJ90A-HR - pass pass - - - - pass - - - - - pass - - - - -
SMDJ100A-HR - pass pass - - - - pass - - - - - pass - - - - -
SMDJ110A-HR - pass pass - - - - pass - - - - - pass - - - - -
SMDJ120A-HR - pass pass - - - - pass - - - - - pass - - - - -
SMDJ130A-HR - pass pass - - - - pass - - - - - pass - - - - -
SMDJ150A-HR - pass pass - - - - pass - - - - - pass - - - - -
Pin Injection Protection Per RTCA/DO-160G
Note:
1. L1 = Level1, L2 = Level 2, L3 = Level 3, L4 = Level 4, L5 = Level 5
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate
the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be
used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Littelfuse:
SMDJ9.0CA-HR SMDJ45.0CA-HR SMDJ170.0CA-HR SMDJ18.0A-HR SMDJ13.0CA-HR SMDJ14.0CA-HR
SMDJ160.0A-HR SMDJ110.0CA-HR SMDJ18.0CA-HR SMDJ90.0CA-HR SMDJ170.0A-HR SMDJ36.0A-HR
SMDJ7.0A-HR SMDJ11.0CA-HR SMDJ15.0A-HR SMDJ7.0CA-HR SMDJ26.0CA-HR SMDJ64.0CA-HR SMDJ7.5A-
HR SMDJ70.0A-HR SMDJ11.0A-HR SMDJ120.0A-HR SMDJ5.0CA-HR SMDJ120.0CA-HR SMDJ26.0A-HR
SMDJ10.0A-HR SMDJ12.0A-HR SMDJ51.0CA-HR SMDJ60.0A-HR SMDJ78.0A-HR SMDJ5.0A-HR SMDJ75.0CA-
HR SMDJ8.0CA-HR SMDJ33.0A-HR SMDJ12.0CA-HR SMDJ9.0A-HR SMDJ22.0A-HR SMDJ130.0A-HR
SMDJ40.0CA-HR SMDJ75.0A-HR SMDJ17.0CA-HR SMDJ10.0CA-HR SMDJ58.0A-HR SMDJ43.0CA-HR
SMDJ100.0CA-HR SMDJ6.0A-HR SMDJ20.0A-HR SMDJ17.0A-HR SMDJ8.5CA-HR SMDJ30.0CA-HR SMDJ85.0A-
HR SMDJ30.0A-HR SMDJ40.0A-HR SMDJ6.5CA-HR SMDJ48.0CA-HR SMDJ70.0CA-HR SMDJ7.5CA-HR
SMDJ36.0CA-HR SMDJ54.0A-HR SMDJ110.0A-HR SMDJ160.0CA-HR SMDJ16.0CA-HR SMDJ150.0CA-HR
SMDJ14.0A-HR SMDJ24.0A-HR SMDJ8.5A-HR SMDJ90.0A-HR SMDJ33.0CA-HR SMDJ20.0CA-HR SMDJ24.0CA-
HR SMDJ130.0CA-HR SMDJ28.0A-HR SMDJ16.0A-HR SMDJ45.0A-HR SMDJ100.0A-HR SMDJ6.5A-HR
SMDJ13.0A-HR SMDJ150.0A-HR SMDJ43.0A-HR SMDJ48.0A-HR SMDJ22.0CA-HR SMDJ54.0CA-HR SMDJ8.0A-
HR SMDJ60.0CA-HR SMDJ85.0CA-HR SMDJ78.0CA-HR SMDJ15.0CA-HR SMDJ28.0CA-HR SMDJ64.0A-HR
SMDJ51.0A-HR
