Ceramic body and wire wound construction pro-
vide highest SRFs available in 0805 size. These ultra-compact inductors provide excep-
tional Q values, even at high frequencies.
Chip Inductors–0805HS Series (2012)
Inductance2Percent SRF Min5DCR Max6IDC Max7Color
Part Number1(nH) Tolerance3Q Min4(MHz) (Ohms) (mA) Code
0805HS-030T_B_ 3.3 @ 250 MHz 20,10,550 @ 1500 MHz 7900 .08 600 Black
0805HS-060T_B_ 6.8 @ 250 MHz 20,10,550 @ 1000 MHz 5500 .11 600 Brown
0805HS-080T_B_ 8.2 @ 250 MHz 20,10,550 @ 1000 MHz 4700 .12 600 Red
0805HS-120T_B_ 12 @ 250 MHz 20,10,550 @ 500 MHz 4000 .15 600 Orange
0805HS-150T_B_ 15 @ 250 MHz 20,10,550 @ 500 MHz 3400 .17 600 Yellow
0805HS-180T_B_ 18 @ 250 MHz 20,10,550 @ 500 MHz 3300 .20 600 Green
0805HS-220T_B_ 22 @ 250 MHz 20,10,5,2 55 @ 500 MHz 2600 .22 500 Blue
0805HS-270T_B_ 27 @ 250 MHz 20,10,5,2 55 @ 500 MHz 2500 .25 500 Violet
0805HS-330T_B_ 33 @ 250 MHz 20,10,5,2 60 @ 500 MHz 2050 .27 500 Gray
0805HS-390T_B_ 39 @ 250 MHz 20,10,5,2 60 @ 500 MHz 2000 .29 500 White
0805HS-470T_B_ 47 @ 200 MHz 20,10,5,2 60 @ 500 MHz 1650 .31 500 Black
0805HS-560T_B_ 56 @ 200 MHz 10,5,2,1 60 @ 500 MHz 1550 .34 500 Brown
0805HS-680T_B_ 68 @ 200 MHz 10,5,2,1 60 @ 500 MHz 1450 .38 500 Red
0805HS-820T_B_ 82 @ 150 MHz 10,5,2,1 65 @ 500 MHz 1300 .42 400 Orange
0805HS-101T_B_ 100 @ 150 MHz 10,5,2,1 65 @ 500 MHz 1200 .46 400 Yellow
0805HS-121T_B_ 120 @ 150 MHz 10,5,2,1 50 @ 250 MHz 1100 .51 400 Green
0805HS-151T_B_ 150 @ 100 MHz 10,5,2,1 50 @ 250 MHz 920 .56 400 Blue
0805HS-181T_B_ 180 @ 100 MHz 10,5,2,1 50 @ 250 MHz 870 .64 400 Violet
0805HS-221T_B_ 220 @ 100 MHz 10,5,2 50 @ 250 MHz 850 .70 400 Gray
Document 159-1
Specifications subject to change without notice. Document 159-1 Revised 4/19/01
1. When ordering, please specify tolerance and packaging codes:
Inductance tolerance code:
Table above shows stock tolerances in bold.
F= ±1%, G= ±2%, J= ±5%, K= ±10%, M= ±20%
0805HS-221T_B_ Packaging code:
C=7″machine-ready reel EIA RS-481 clear plastic
tape. 2000 per reel.
B=Less than full reel Not machine-ready
.
The car-
rier tape may not be a single continuous length. To
have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″machine-ready reel EIA RS-481 clear plastic
tape. Factory order only, not stocked. 7500 per reel.
2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP4286A
impedance analyzer with Coilcraft-provided correlation pieces. For
recommended test procedures, contact Coilcraft.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using Agilent/HP4291A with Agilent/HP16193 test fixture and
on Agilent/HP8753D with Coilcraft SMD-D test fixture.
5. SRF measured using Agilent/HP8720D network analyzer and Coilcraft
SMD-D test fixture.
6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft
CCF858 test fixture.
7. For 15° C rise.
8. Operating temperature range −40° C to +125° C.
9. Electrical specifications at 25° C.
10. For environmental data, see “Product Specifications” page (Doc. 121).
0805HS Series (2012)
TYPICAL Q vs FREQUENCY
12 nH
6.8 nH
3.3 nH
22 nH
39 nH
68 nH
120 nH
100
90
80
70
60
50
40
30
20
10
010 100 Frequency (MHz)
Q
1,000 10,000
L vs FREQUENCY
1,000
100
10
10 100
Frequency (MHz)
Inductance (nH)
1,00
0
1
220 nH
100 nH
39 nH
15 nH
3.3 nH
A
Max. B
Max. C
Max. EFGHI J
.085 .060 .057 .050 .020 .040 .070 .040 .030
2,16 1,52 1,45 1,27 0,51 1,02 1,78 1,02 0,76
Parts/reel: 7″2,000; 13″7,500 Tape width: 8 mm
For packaging data, see “Tape and Reel Specifications” (Document 173).
Document 159-2
Specifications subject to change without notice. Document 159-2 Revised 4/9/01
