AC(X) resistors AC terminator networks EU features * * * * * Thin film construction Surface mount package Stable resistor technology High component density Products with lead-free terminations meet EU RoHS and China RoHS requirements applications * Signal termination * Signal conditioning * DC current blocking dimensions and construction Bonding Wire Package Total Code Power c Pins L W a p Lead w H Dimensions inches (mm) L 0.2 W 0.2 w 0.2 H 0.2 p 0.1 a 0.1 c 0.1 .236 (5.99) 150 (3.81) .063 (1.60) .025 (0.635) .010 (0.25) .026 (0.66) Q20 1 watt 20 .341 (8.66) Q24 1 watt 24 .341 (8.66) .236 (5.99) 150 (3.81) .063 (1.60) .025 (0.635) .010 (0.25) .026 (0.66) W20 1.2 watts 20 .500 (12.7) .408 (10.36) .300 (7.62) .084 (2.40) .050 (1.27) .016 (0.41) .026 (0.66) Die Pad Si Molded Wafer Resin circuit schematic 4 Commons Single Common ACB: 20 pins 6 Commons ACD: 24 pins ACC: 20 pins ordering information New Part # ACB Type ACB ACC ACD Q20 T Package Code Reference above table Termination Material T: Sn (Other termination styles available, contact factory for options) TEB Packaging TEB: 13" embossed plastic tape 500 Nominal Resistance 2 significant digits + number of zeros K Tolerance K: 10% / 101 Nominal Capacitance 2 significant digits + number of zeros M Tolerance M: 20% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 140 2/12/08 KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com AC terminator networks Parallel Termination VTerm 50 ohms Driver 100 pF Receiver applications and ratings Part Designation Power Rating @ 70C (Per Element) T.C.R. (ppm/C) Capacitor Voltage Rating Operating Temperature Range Resistance Range (E-24) Resistance Tolerance Capacitor Range pF (E-24) Capacitor Tolerance ACB ACC ACD 100mW 200 20V -55C to +125C 10 ~ 1,000 K: 10% 33 ~ 400pF M: 20% environmental applications Performance Characteristics Parameter Maximum R Test Method Resistance to Soldering Heat +0.25% MIL-R-55342 4.7.7 Short Time Overload +0.50% MIL-R-55342 4.7.5 Moisture Resistance +0.50% MIL-STD-202 method 103 Thermal Shock +0.50% MIL-STD-202 method 107 H.A.S.T. +1% 2 Atm., 121C, 96 hrs Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/29/04 KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 141 resistors AC(X)