Q-SERIES 14mmO Panel Mounting LED Indicator Product Specification Distinctive Features and Specifications * * * * * * * * 14mm panel mounting LED indicator 10mm coloured diffused epoxy lens or 10mm water clear super bright LEDs Bright chrome, black chrome or satin grey bezel finish Prominent and flush bezel styles 2VDC - 220VAC (2.8 x 0.8) terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer O 14,00 0,1 PANEL CUTOUT NB: UL Recognised Component TECHNICAL Specifications Switch Voltage Operating Voltage Vop (Min to Max) 1.8 to 2.5VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VDC 207 to 253VDC 2VDC (No Resistor) 12VDC 24VDC 28VDC 110VAC 230VAC Operating Current |op (Typical All Types) 20mA 20mA 20mA 20mA 6mA 3mA Intensity (Typical) at |op Standard Prominent Flush Forward Voltage (all voltages) (all voltages) HE Red 80mcd 10mcd 2.0V Green 40mcd 5mcd 2.2V Yellow 30mcd 4mcd 2.1V Blue 280mcd 10mcd 3.2V White 350mcd 20mcd 3.2V Bi-colour (Typical) (Red/Green) 80/50mcd 14/10mcd 2.0V/2.2V Tri-colour (Typical) (Red/Green/Yellow) 80/50/50mcd 14/10/10mcd 2.0V/2.2V/2.1V Bi-colour - The colour is changed by reversing the polarity of the supply voltage. Tri-colour - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright HE Red Green Yellow Blue White Prominent Flush (all voltages) (all voltages) 7,500mcd 2000mcd 4,100mcd 250mcd 2,500mcd 350mcd 1,300mcd 300mcd 1,900mcd 200mcd Luminous intensity will be reduced with lower operating current. Forward Voltage 2.2V 3.5V 2.3V 3.7V 3.7V Max Reverse Voltage: 5V Viewing Angle: 100 (dependant on model) Life Expectancy: 100,000 hours Operating Temperature Range: -40 to +85C Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. www.apem.com 10 Q-SERIES 14mmO Panel Mounting LED Indicator Technical Drawings SOLDER LUG/FASTONS prominent BEZEL PINS WIRES 10 SHORT BODY PINS SHORT BODY WIRES 10 SOLDER LUG/FASTONS FLUSH BEZEL PINS WIRES 10 SHORT BODY PINS SHORT BODY WIRES 10 CUSTOM ENGRAVING Custom engraving available on flush bezel versions, contact APEM for further details. Note: The company reserves the right to change specifications without notice. www.apem.com 11 Q-SERIES 14mmO Panel Mounting LED Indicator Order Overview STANDARD OPTIONS The Q14 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 14 P 1 C XX B 28 SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOUR VOLTAGE Q 14 = O14mm P = Prominent 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome XX = Fixed Light R = Red 02 = 2VDC (Blank) = Unsealed B = Black Chrome G = Green 06 = 6VDC E = IP67 2 = Pins G = Satin Grey KK = Flashing Light (only up to 28VDC) Y = Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC F = Flush 3 = Wires YY = Bi-colour ZZ = Tri-colour 6 = Short body Pins E SEALING 24A = 24VAC/DC 7 = Short body Wires SR = Super Bright Red 28 = 28VDC SG = Super Bright Green 28A = 28VAC/DC SY = Super Bright Yellow 110 = 110VAC SB = Super Bright Blue 220 = 220VAC SW = Super Bright White RG = Red/Green Example Q14P1CXXB28E O14mm, prominent bezel, solder lug terminals, bright chrome finish, fixed light, blue, 28volt DC LED, IP67 Panel Seal RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 22AWG, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternate voltages consult APEM * Bicolour LEDs, by connecting the gold Faston (+) one colour is produced, by reversing the supply voltage another colour is produced - Bi-colours are available up to 28VDC * Take care when soldering to the Faston terminals * Short body pins and wires are only available up to 28VDC * The Tri-colour LED has red and green LEDs when both are connected yellow is produced * Standard Tri-colour Faston terminals are two Anodes (+) and one Cathode (-) * Tri-colour wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-colour pins are centre (-) cathode, shortest (+) anode pin green, longest (+) anode pin red * Maximum panel thickness 11mm * For behind panel epoxy sealed options please consult Apem * We recommend using Superbright LEDs for use at 220VAC www.apem.com 12