( rT am ( NEW PRODUCT INFORMATION GILBERT ENGINEERING CO., INC. POST OFFICE BOX 23189 5310 W. CAMELBACK ROAD TEL: 602-245-1050 FAX: 602-931-0684 PHOENIX, AZ 85063-3189 USA GLENDALE, AZ 85301-7597 USA TEL: 800-528-5567 FAX: 800-344-6358 Body Main Nut Back Nut ~ 2.31 - , \ - : \ : . _ , oe phd i | , _ hy j | : em | | | | oh ' rey 122 Dia. Pin - i. | 1 bo} d 7 4 5/8-24 "KS" Entry Port 1-1/4 Hex 1-1/8 Hex These connectors are designed for high current applications and/or applications where cable has been selected for minimal loop resistance. This connector is designed with a large diameter (.122 in.) pin and standard 5/8-24 port threads allowing connection to power inserters and power supplies ONLY if the seizing mechanisms of the equipment will accommodate the larger diameter pin. Product is available in pin, splice, and test configurations. Coring/stripping tools are available which accept the larger center conductor of the 50 Ohm cable and are necessary for the cable preparation. Power Rating AC Operating Voltage Tools Part Number Description Impedance (Amps continuous) (VAC @ 1 to 60 Hz) Required , rep G-SCT-625/50 GRS-625/50-CH Pin Connector 50 Ohm 25 @ 10C Rise 90 G-JCS-625 ; ong G-SCT-625/50 GRS-625/50-SP Splice Connector 50 Ohm 25 @ 10 C Rise 90 G-JCS-625 GTC-625/50-GHZ-N-50 Test Connector 50 Ohm N/A N/A N/A CABLE SPECIFICATIONS Center Conductor Dielectric Outer Conductor Cable Manufacturer Diameter Diameter Diameter TFC29631 (SPC625JVISC) , , TFC29632 (SPC625JBVISC) Times Fiber .218 (Solid Copper) 563 625 WARNING & DISCLAIMER: USE OF THIS PRODUCT MAY RESULT IN INJURY OR DEATH. BECAUSE THE APPLICATION AND THE CIRCUMSTANCES CONCERNING THE USE OF THIS PRODUCT ARE BEYOND THE CONTROL OF GILBERT ENGINEERING, THE USER ASSUMES ALL RISKS ASSOCIATED WITH THE PRODUCT. GILBERT ENGINEERING HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER FOR INJURY OR DEATH CAUSED BY THE USE OR MISUSE OF THIS PRODUCT. G-1400-369 1996 Gilbert Engineering Co. Inc.