TELEDYNE RELAYS SERIES RF100 RF103 N EW HIGH REPEATABILITY ULTRAMINIATURE CENTIGRID(R) RELAY BROADBAND DC TO RF SERIES DESIGNATION RELAY TYPE RF100 Repeatable, RF, Centigrid(R) relay RF103 Sensitive, repeatable, RF, Centigrid(R) relay INTERNAL CONSTRUCTION UNIFRAME UPPER STATIONARY CONTACT ARMATURE PERFORMANCE FEATURES The ultraminiature RF100 and RF103 relays are designed to provide improved RF signal repeatability over the frequency range by balancing the aggregate insertion loss elements of the relays' design. Highly suitable for use in attenuator and other RF circuits, the RF 100 and RF103 feature: MOVING CONTACT LOWER STATIONARY CONTACTS * High repeatability. * Broader bandwidth. * Metal enclosure for EMI shielding. * Ground pin option to improve case grounding. * High isolation between control and signal paths. * Highly resistant to ESD. CONSTRUCTION FEATURES ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature -55 C to +85 C Vibration (General Note 1) 10 G to 500 Hz Shock (General Note 1) 30 G, 6 ms. half sine Enclosure Hermetically sealed RF100 0.09 oz. (2.55 g) max. RF103 0.16 oz. (4.50 g) max. Weight The following unique construction features and manufacturing techniques provide excellent resistance to environmental extremes and overall high reliability. * Uni-frame motor design provides high magnetic efficiency and mechanical rigidity. * Minimum mass components and welded construction provide maximum resistance to shock and vibration. * Dual weld projection provides increased design robustness. * Advanced cleaning techniques provide maximum assurance of internal cleanliness. * Gold plated precious metal alloy contacts ensure reliable switching. * Hermetically sealed . Solderable leads. SERIES RF100 and RF103 TYPICAL RF CHARACTERISTICS (Notes 1, 2 and 3) INSERTION LOSS AND VSWR CHARACTERISTICS RF100 and RF103 NORMALLY CLOSED CONTACTS 2.0 INSERTION LOSS 1.9 -0.4 1.8 -0.6 1.7 -0.8 1.6 -1.0 1.5 1.2 1.4 -1.4 1.3 VSWR INSERTION LOSS (dB) 0.0 -0.2 1.2 -1.6 -1.8 1.1 VSWR 1.0 -2.0 .0003 1.0 2.0 4.0 3.0 FREQUENCY (GHz) 5.0 6.0 INSERTION LOSS AND VSWR CHARACTERISTICS RF100 and RF103 NORMALLY OPEN CONTACT 2.0 INSERTION LOSS 1.9 -0.4 1.8 -0.6 1.7 -0.8 1.6 -1.0 1.5 1.2 1.4 -1.4 1.3 VSWR INSERTION LOSS (dB) 0.0 -0.2 1.2 -1.6 VSWR -1.8 1.1 1.0 -2.0 .0003 1.0 2.0 3.0 4.0 5.0 6.0 FREQUENCY (GHz) ISOLATION CHARACTERISTICS RF100 AND RF103 RELAYS ISOLATION CONTACT TO CONTACT (NOTE 5) 0 -10 -10 ISOLATION (dB) ISOLATION (dB) ISOLATION POLE TO POLE (NOTE 4) 0 -20 -30 -40 -50 -30 -40 -50 -60 .0003 -20 -60 1.0 2.0 3.0 4.0 FREQUENCY (GHz) 5.0 6.0 .0003 1.0 2.0 3.0 4.0 5.0 6.0 FREQUENCY (GHz) RF Notes: 1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid(R) 6002 with SMA connectors. (RT/duroid(R) is a registered trademark of Rogers Corporation). b. Relay header is in contact with but not soldered to ground plane or connected to ground via ground pin. c. Test performed at room ambient temperature. d. Terminals not tested were terminated with 50 ohm load. e. Contact signal level: 20 dBm. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Data is per pole. 4. Data is the average from readings taken when the relay is de-energized and energized. Measurement points are from pins 1 and 3 to pins 5 and 7 (de-energized) and pins 1 and 2 to pins 6 and 7 (energized). 5.Data is the average from readings taken when the relay is de-energized and energized. Measurement points are from pins 1, 3 to 2 and pins 5,7 to 6 (de-energized) and pins 1,2 to 3 and pins 6,7 to 5 (energized). SERIES RF100 and RF103 TYPICAL RF INSERTION LOSS REPEATABILITY CHARACTERISTICS (Notes 1 and 2) NORMALLY CLOSED 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 % TOTAL NUMBER RECORDED TEST CYCLES % TOTAL NUMBER RECORDED TEST CYCLES REPEATABILITY CHARACTERISTICS RF100 RELAYS NORMALLY OPEN 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 REPEATABILITY (dB) REPEATABILITY (dB) NORMALLY CLOSED 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 REPEATABILITY (dB) % TOTAL NUMBER RECORDED TEST CYCLES % TOTAL NUMBER RECORDED TEST CYCLES REPEATABILITY CHARACTERISTICS RF103 RELAYS NORMALLY OPEN 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 REPEATABILITY (dB) RF Insertion Loss Repeatability Notes 1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid 6002(R) with SMA connectors. (RT/duroid(R) is a registered trademark of Rogers Corporation). b. Relays header is connected to but not soldered to ground plane nor connected via ground pin. c. Test performed at room ambient temperature. d. Contact signal level: 20 dBm. 2. Data presented herein represents typical characteristics and is not intended to be used as specification limits. 3. Insertion loss repeatability measured over frequency range from .3 MHz to 4 GHz. SERIES RF100 and RF103 GENERAL ELECTRICAL SPECIFICATIONS (@25C) Contact arrangement DPDT Rated duty Continuous Contact resistance .100 ohm max. initial (measured 1/8" from the header) Contact load rating Low level: 10 to 50 A, 10 to 50 mV Contact life rating 10,000,000 cycles typical at low level RF100: 450 mW typical @ nominal rated voltage RF103: 200 mW typical @ nominal rated voltage Coil operating power RF100 4.0 ms. max. RF103 6.0 ms. max. RF100 3.0 ms. max. RF103 3.0 ms. max. Operate time Release time Intercontact capacitance 0.4 pF typical Insulation resistance 1,000 M min. (between mutually isolated terminals) Dielectric strength 350 VRMS / 60 Hz @ atmospheric pressure DETAILED ELECTRICAL SPECIFICATIONS (@ 25C) BASE PART NUMBERS RF100-5 RF103-5 RF100-12 RF103-12 Coil voltage, nominal, VDC 5.0 12.0 RF100 50 390 RF103 100 800 3.6 9.0 Coil resistance, ohms 20% Pick-up voltage max, VDC OUTLINE DIMENSIONS .031 (.79) REF. 7 8 4 .335 (8.51) SQ. MAX. H DIMENSION MAX. .035 (.89) REF. 2 6 5 1 .375 (9.53) SQ. MAX. 0.100 0.010 (2.54 0.25) H 3 TERMINAL NUMBERING SCHEMATIC * TERMINAL NUMBERING AND SCHEMATIC ARE AS VIEWED FROM THE TERMINALS. * DIMENSIONS ARE IN INCHES (MILLIMETERS). * SCHEMATIC AND EXTERNAL DIMENSIONS SHOWN WITHOUT GROUND PINS. * TO ORDER THE CASE GROUND OPTION, AFTER THE SERIES DESIGNATOR, ADD "Y" TO THE PART NUMBER FOR TAB POSITION OR "Z" TO THE PART NUMBER FOR CENTER POSITION . EXAMPLE: RF1##Y-COIL VOLTAGE RF100 .290 (7.37) RF103 .395 (10.03) .75 (19.05) MIN. +.002 .017 -.001 ( .43 +.05 -.03 ) EXTERNAL DIMENSIONS GENERAL NOTES 1. Relays will exhibit no contact chatter in excess of 10 s or transfer in excess of 1 s. (c)1998 TELEDYNE RELAYS 12525 Daphne Ave. Hawthorne, CA 90250 (213) 777-0077 http://www.teledynerelays.com.