1
MOTOROLA WIRELESS SEMICONDUCTOR
SOLUTIONS – RF AND IF DEVICE DATA
Product Preview
The RF Building Block Series
GSM Low Noise Amplifier
with Gain Control
Designed primarily for use in GSM wireless communication systems. The
MBC13706 is a silicon low noise amplifier with three available gain settings.
Two gain control pins control the gain settings. The LNA can be turned off
during transmit mode to save current by disabling the RX Enable pin. The
LNA is packaged in a low–cost Micro–8 package.
•Usable Frequency Range: 925 to 960 MHz
•Three Gain States: 26, 18, and 0 dB
•3.0 dB Max Noise @ Max Gain
•High Reverse Isolation: > 40 dB @ 945 MHz
•Low Power Consumption = 30 mW @ Max Gain, 3.0 V
•Low Standby Current = 200 µA (Typ)
•Low Cost Surface Mount Plastic Package
* Patent Pending
MBC13706
SEMICONDUCTOR
TECHNICAL DATA
GSM LNA
WITH GAIN CONTROL
Order this document by MBC13706PP/D
PLASTIC PACKAGE
CASE 846A
(Micro–8)
PIN CONNECTIONS
6
7
8
5
3
2
1
4
RF In
EN
GC2
GC1
RF Out
Gnd
(Top View)
Gnd
VCC
1
Device Operating
Temperature Range Package
ORDERING INFORMATION
MBC13706 TA = –30 to 70°C Micro–8
8
(Scale 2:1)
GC2
Simplified Block Diagram
RF In RF Out
GC1
EN
This document contains information on a product under development. Motorola reserves the
right to change or discontinue this product without notice. Motorola, Inc. 2000 Rev 0
MBC13706
2MOTOROLA WIRELESS SEMICONDUCTOR
SOLUTIONS – RF AND IF DEVICE DATA
NOTES
MBC13706
3
MOTOROLA WIRELESS SEMICONDUCTOR
SOLUTIONS – RF AND IF DEVICE DATA
NOTES
MBC13706
4MOTOROLA WIRELESS SEMICONDUCTOR
SOLUTIONS – RF AND IF DEVICE DATA
PLASTIC PACKAGE
CASE 846A–02
(Micro–8)
ISSUE D
OUTLINE DIMENSIONS
S
B
M
0.08 (0.003) A S
T
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A2.90 3.10 0.114 0.122
B2.90 3.10 0.114 0.122
C––– 1.10 ––– 0.043
D0.25 0.40 0.010 0.016
G0.65 BSC 0.026 BSC
H0.05 0.15 0.002 0.006
J0.13 0.23 0.005 0.009
K4.75 5.05 0.187 0.199
L0.40 0.70 0.016 0.028
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH,
PROTRUSIONS OR GATE BURRS SHALL NOT
EXCEED 0.15 (0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED 0.25 (0.010)
PER SIDE.
–B–
–A–
D
K
G
PIN 1 ID
8 PL
0.038 (0.0015)
–T– SEATING
PLANE C
HJL
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Af firmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1,
P.O. Box 5405, Denver , Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Minam i–Azabu. Minato–ku, Tokyo 106–8573 Japan. 81–3–3440–3569
T echnical Information Center: 1–800–521–6274 ASIA/P ACIF IC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
852–26668334
HOME PAGE: http://www .motorola.com/semiconductors/
MBC13706PP/D
◊
