Evolution Dual Series * 25A & 50A Output rating per channel @ 40C * 24 to 280 & 48 to 600VAC Operating voltage * 4-15, 15-32 & 4-32VDC Control input options * Four input termination options * Zero-crossing (resistive loads) or random-fire (inductive loads) output * Input status LED indicator for each channel * Available with IP20 "Touch-Safe" Covers * UL508 Endurance Rating PRODUCT SELECTION Control Voltage 240V,25A 240V, 50A 480V, 25A 480V, 50A 4-15 VDC 15-32VDC 4-32 VDC CD2425D1U CD2425E1U CD2425W1U CD2450D1U CD2450E1U CD2450W1U CD4825D1U CD4825E1U CD4825W1U CD4850D1U CD4850E1U CD4850W1U AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-440Hz) [Vrms] Load Current Range (3) [Arms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] (2) Maximum 1 Cycle Surge Current (50/60) [Apk] Maximum Surge Current 50Hz (20ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [C/W] Maximum I t for Fusing 50/60Hz (1/2 cycle) [A sec] Minimum Power Factor (with Maximum Load) Cx2425xxxx Cx2450xxxx Cx4825xxxx Cx4850xxxx 24-280 0.15-25 600 1.0 500 275/300 275 1.3 0.65 380/370 0.5 24-280 0.15-50 600 1.0 500 710/750 710 1.3 0.33 2520/2320 0.5 48-600 0.15-25 1200 1.0 500 275/300 275 1.3 0.65 380/370 0.5 48-600 0.15-50 1200 1.0 500 710/750 710 1.3 0.33 2520/2320 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] CxxxDxxx CxxxExxx CxxxWxxx 4-15 VDC 4 VDC 1 .0 VDC 16 mA @ 5 VDC 300 Ohm 1/2 Cycle 1/2 Cycle 15-32 VDC 15 VDC 1 .0 VDC 18 mA @ 24 VDC 1500 Ohm 1/2 Cycle 1/2 Cycle 4-32 VDC 4 VDC 1 .0 VDC 10 mA @ 12 VDC See Note 5 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output (50/60Hz) Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Terminals Max. Torque Max. Wire Size GENERAL NOTES 1) 2) 3) 4) 5) All parameters at 25C and per section unless otherwise specified. Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heat sinking required, see derating curves. Turn-on time for random turn-on (R) versions is 0.1 msec. Input circuit incorporates active current limitation WIRING DIAGRAM Parameters 4000 Vrms 2500 Vrms 109 Ohm 10 pF -40 to 80 C -40 to 125 C 3.0 oz (86.5 g) Screw Type Output: 8-32 Output: 20 in lb (2.2Nm) Output:2 x AWG 8 (3.8mm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 Rev. 113011 ANNEX - ENVIROMENTAL INFORMATION