Data sheet
Creation date January 13, 2019 11:18:45 PM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1
OMNIMATE Signal - series TOP1.5GS
TOP1.5GS18/180 5 2STI OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
Similar to illustration
General ordering data
Type TOP1.5GS18/180 5 2STI OR
Order No. 0598460000
Version PCB terminal, 5.08 mm, No. of poles: 18, 180°,
Solder pin length (l): 4.5 mm, tinned, Orange, TOP
connection, Clamping range, max. : 2.5 mm², Box
GTIN (EAN) 4008190523725
Qty. 20 pc(s).
Product data IEC: 630 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 10 A / AWG 26 - AWG 14
Packaging Box
Conductor entry and screw connection in the same
direction on this PCB terminal with 5.08 mm pitch for
conductor cross-sections up to 2.5 mm². Conductor
outlet direction 90° and 180°.
Data sheet
OMNIMATE Signal - series TOP1.5GS
TOP1.5GS18/180 5 2STI OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 13, 2019 11:18:45 PM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 93.24 mm Width (inches) 3.671 inch
Height 24 mm Height (inches) 0.945 inch
Height of lowest version 19.5 mm Depth 18.5 mm
Depth (inches) 0.728 inch Net weight 61.75 g
System parameters
Product family OMNIMATE Signal - series
TOP1.5GS
Wire connection method
TOP connection
Mounting onto the PCB THT solder connection Conductor outlet direction 180°
Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch
No. of poles 18 Fitted by customer No
Solder pin length (l) 4.5 mm Solder pin dimensions 0.8 x 1.0 mm
Solder eyelet hole diameter (D) 1.3 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Number of solder pins per pole 2 Screwdriver blade 0.6 x 3.5
Screwdriver blade standard DIN 5264 Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.5 Nm Clamping screw M 2.5
Stripping length 10 mm L1 in mm 86.36 mm
L1 in inches
3.4 inch
Touch-safe protection acc. to DIN VDE
0470 IP 20
Touch-safe protection acc. to DIN VDE
57 106 Safe from finger touch
Volume resistance
1.20 mΩ
Material data
Insulating material PA Colour Orange
Colour chart (similar) RAL 2000 Insulating material group I
CTI ≥ 600 Insulation resistance ≥ 108 Ω
UL 94 flammability rating V-2 Contact material CuZn
Contact surface tinned Layer structure of solder connection 1.5-3 µm Ni / 4-6 µm Sn
Storage temperature, min. -25 °C Storage temperature, max. 55 °C
Max. relative humidity during storage 80 % Operating temperature, min. -50 °C
Operating temperature, max. 100 °C Temperature range, installation, min. -25 °C
Temperature range, installation, max. 100 °C
Conductors suitable for connection
Clamping range, min. 0.13 mm² Clamping range, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 14
Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 2.5 mm²
Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min. 0.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max. 2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min
0.5 mm²
w. wire end ferrule, DIN 46228 pt 1,
max. 2.5 mm²
Plug gauge in accordance with EN
60999 a x b; ø 2.4 mm x 1.5 mm
Data sheet
OMNIMATE Signal - series TOP1.5GS
TOP1.5GS18/180 5 2STI OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 13, 2019 11:18:45 PM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. no. of poles
(Tu=20°C) 24 A
Rated current, max. no. of poles
(Tu=20°C) 19 A
Rated current, min. no. of poles
(Tu=40°C) 21 A
Rated current, max. no. of poles
(Tu=40°C) 16 A
Rated voltage for surge voltage class /
pollution degree II/2 630 V
Rated voltage for surge voltage class /
pollution degree III/2 320 V
Rated voltage for surge voltage class /
pollution degree III/3 250 V
Rated impulse voltage for surge voltage
class/ pollution degree II/2 2.5 kV
Rated impulse voltage for surge voltage
class/ pollution degree III/2 2.5 kV
Rated impulse voltage for surge voltage
class/ contamination degree III/3 2.5 kV
Short-time withstand current resistance
3 x 1s with 120 A
Rated data acc. to CSA
Institute (CSA) Certificate No. (CSA)
154685-1501716
Rated voltage (Use group B / CSA) 300 V Rated voltage (Use group D / CSA) 300 V
Rated current (Use group B / CSA) 10 A Rated current (Use group D / CSA) 10 A
Wire cross-section, AWG, min. AWG 26 Wire cross-section, AWG, max. AWG 14
Reference to approval values Specifications are
maximum values, details -
see approval certificate.
Rated data acc. to UL 1059
Rated voltage (Use group B / UL 1059) 300 V Rated voltage (Use group D / UL 1059) 300 V
Rated current (Use group B / UL 1059) 10 A Rated current (Use group D / UL 1059) 10 A
Wire cross-section, AWG, min. AWG 26 Wire cross-section, AWG, max. AWG 14
Packaging
Packaging Box VPE length 40 mm
VPE width 105 mm VPE height 222 mm
Classifications
ETIM 3.0 EC001284 ETIM 4.0 EC002643
ETIM 5.0 EC002643 ETIM 6.0 EC002643
UNSPSC 30-21-18-01 eClass 6.2 27-26-11-01
eClass 7.1 27-44-04-01 eClass 8.1 27-44-04-01
eClass 9.0 27-44-04-01 eClass 9.1 27-44-04-01
Data sheet
OMNIMATE Signal - series TOP1.5GS
TOP1.5GS18/180 5 2STI OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 13, 2019 11:18:45 PM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4
Notes
Notes • Additional colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Wire end ferrule with plastic collar to DIN 46228/4
• Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes.
• P on drawing = pitch
• Rated data refer only to the component itself. Clearance and creepage distances to other components are to
be designed in accordance with the relevant application standards.
IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized
standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties
in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Approvals
Approvals
ROHS Conform
Downloads
Brochure/Catalogue FL DRIVES EN
FL ANALO.SIGN.CONV. EN
MB DEVICE MANUF. EN
FL DRIVES DE
CAT 2 PORTFOLIOGUIDE EN
FL BUILDING SAFETY EN
FL APPL LED LIGHTING EN
FL INDUSTR.CONTROLS EN
FL MACHINE SAFETY EN
FL HEATING ELECTR EN
FL APPL_INVERTER EN
FL_BASE_STATION_EN
FL ELEVATOR EN
FL POWER SUPPLY EN
FL 72H SAMPLE SER EN
PO OMNIMATE EN
Engineering Data EPLAN, WSCAD
Data sheet
OMNIMATE Signal - series TOP1.5GS
TOP1.5GS18/180 5 2STI OR
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date January 13, 2019 11:18:45 PM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5
Dimensional drawing
Graph
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
260
240
220
200
180
160
140
120
100
80
60
40
20
00 20 40 60 80 100 120 140 160 180 200 220 240
time [s]
Temperature [°C]
Preheating
Cooling rate < 6 °K/s
250 °C
260 °C
Heating rate < 3 °K/s
255 °C
Typical process
Process limits
Temperature on board
Total contact time max. 10 sec.
appr. 150°C
260
240
220
200
180
160
140
120
100
80
60
40
20
00 20 40 60 80 100 120 140 160 180 200 220 240
time [s]
Temperature [°C]
Preheating
Cooling rate < 6 °K/s
250 °C
260 °C
Contact time appr. 3 sec.
Typical process
Prozess limits
Temperature on board
Heating rate < 3 °K/s
255 °C
appr. 150 °C
Wave soldering profiles
Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included
two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are
qualified.
When choosing a suitable profile for your application, the following factors also need to be considered:
- PCB thickness
- Proportion of Cu in the layers
- Single/double-sided assembly
- Product range
- Heating and cooling rates
The single and double wave profiles each indicate the recommended operating range, including the maximum
soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above
maximum profile.
Wave Solder Profile
Recommended wave solderding profiles
We reserve the right to make technical changes.
Single Wave:
Double Wave:
