n ORDERING INFORMATION
NY P – 12 W – K
[Example] (a) (b) (*) (c) (d) (e)
n FEATURES
l Ultra slim type with 5 mm thickness
—Good for high density mounting
l Low power consumption and high sensitivity
—Nominal coil power: 120 mW
—Operating power: 54 mW
l UL, CSA, VDE recognized
l Conforms to IEC 1010-1 and 1131-2
l Wide operating range
l SIL pitch terminals
l Plastic sealed type
l Compatible with solid state I/O module type SN (see
page 376) in size and pin (terminal) arrangement
l Environmentally friendly cadmium free contact type is
available.
l RoHS compliant since date code: 0439C1
Please see page 6 for more information
(a) Series Name NY : NY Series
(b) TerminalClassication Nil:PCboardmountingtype
P : Socket mounting type
(c) Nominal Voltage Refer to the COIL DATA CHART
(d) Contact W : Bifurcated type
(e) Enclosure K : Plastic sealed type
Note: Actual marking omits the hyphen (-) of (*)
n SAFETY STANDARD AND FILE NUMBERS
UL508 (File No. E56140)
C22.2 No. 14 (File No. LR35579)
VDE0435 (File No. 11039-4940-1013)
Please note that UL/CSA ratings may differ from the standard ratings.
NY SERIES
POWER RELAY
1 POLE— 5 A (CADMIUM FREE CONTACTS TYPE)
1
Nominal voltage Contact rating
1/8 HP 125 VAC/250 VAC
4.5 to 24 VDC 5 A 30 VDC/250 VAC resistive
Pilot duty C 300
RoHS compliant
2
NY SERIES
n SPECIFICATIONS
Item NY
Contact Arrangement 1 form A (SPST-NO)
Material Gold overlay silver alloy
Style Bifurcated
Resistance(initial) Maximum30mΩ(at1A6VDC)
Rating (resistive) 3 A 250 VAC or 3 A 30 VDC
Maximum Carrying Current 5 A
Maximum Switching Power 750 VA, 90 W
Maximum Switching Voltage 270 VAC, 125 VDC
Maximum Switching Current 5 A
Minimum Switching Load*1 1mA 5 VDC
Coil Nominal Power (at 20°C) 0.12W
Operate Power (at 20°C) 0.054 W
Operating Temperature –40°C to +90°C (no frost) (refer to the CHARACTERISTIC DATA)
Time Value Operate (at nominal voltage) Maximum 10 ms
Release (at nominal voltage) Maximum 5 ms
Insulation Resistance(at500VDC) Minimum1,000MΩ
Dielectric between open contacts 750 VAC 1 minute
Strength
between coil and contacts 3,000 VAC 1 minute
Surge Strength 5,080 V (at 1.2 × 50 µs)
Life Mechanical 2 x 10 7 operations minimum
Electrical 1 × 10 5 operations minimum (at 3A 250VAC, 30VDC)
1.5 × 10 5 operations minimum (at 3 A 120 VAC)
5 × 10 4 operations minimum (at 5 A 250 VAC)
Other Vibration Misoperation 10 to 55 Hz (double amplitude of 1.5 mm)
Resistance
Endurance 10 to 55 Hz (double amplitude of 5.0 mm)
Shock Misoperation 100 m/s2 (11 ± 1 ms)
Resistance
Endurance 1,000 m/s2 (6 ± 1 ms)
Weight Approximately 3.5 g
*1Minimumswitchingloadsmentionedabovearereferencevalues.Pleaseperformtheconrmationtestwiththeactualload
before production since reference values may vary according to switching frequencies, environmental conditions and
expected reliability levels.
3
NY SERIES
Nominal Coil resistance Must operate Must release Nominal
MODEL voltage (±10%) voltage voltage power
NY-4.5W-K 4.5VDC 169Ω 3VDC 0.45VDC 120mW
NY-5W-K 5VDC 208Ω 3.35VDC 0.5VDC 120mW
NY-6W-K 6VDC 300Ω 4VDC 0.6VDC 120mW
NY-9W-K 9VDC 675Ω 6VDC 0.9VDC 120mW
NY-12W-K 12VDC 1,200Ω 8VDC 1.2VDC 120mW
NY-18W-K 18VDC 2,700Ω 12.1VDC 1.8VDC 120mW
NY-24W-K 24VDC 4,800Ω 16.1VDC 2.4VDC 120mW
n COIL DATA CHART
n CHARACTERISTIC DATA
Note: All values in the table are measured at 20°C
10 20 30 50 100 200 300 500
5
3
2
1
0.5
0.3
0.2
0.1
DC
Resistive Load
AC
Resistive
Load
Maximum Switching Power
Switching Voltage (V)
Switching Current (A)
4
NY SERIES
NY type
n REFERENCE DATA
n DIMENSIONS
l Dimensions l Schematics
(BOTTOM VIEW)
l PC board mount-
ing hole layout
(BOTTOM VIEW)
NYP type
Unit: mm
17.5
+0.08
+0.08
0.98
20.1
0.98
20.1
5
NY SERIES
n SOCKET DIMENSIONS n SOCKET DRILLING PLANT
n NOTES
1. Socket ordering code. JL-5N
2. Standard IC socket is not recommended.
Please use socket JL-5N.
Unit: mm
24.5
6
NY SERIES
1. General Information
l Relaysproducedafterthespecicdatecodethatisindicatedoneachdatasheetarelead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
Ithasbeenveriedthatusinglead-freerelaysinleadedassemblyprocesswillnotcauseany
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l Toavoidleadedrelays(forlead-freesample,etc.)pleaseconsultwithareasalesofce.
l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Prole
l Recommended solder paste Sn-3.0Ag-0.5Cu.
RoHS Compliance and Lead Free Relay Information
Reow Solder condtion
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
We highly recommend that you conrm your actual solder conditions
Flow Solder condtion:
Pre-heating: maximum120˚C
Soldering: dip within 5 sec. at
260˚Csolerbath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum360˚C
Duration: maximum 3 sec.
7
NY SERIES
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@fcl.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
Fujitsu Components International Headquarter Ofces
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
FujitsuComponentsAmericaoritsafliatesdonotwarrantthatthecontentofdatasheetiserrorfree.Inacontinuingefforttoimproveour
productsFujitsuComponentsAmerica,Inc.oritsafliatesreservetherighttochangespecications/datasheetswithoutpriornotice.
Rev. June16/2006