SILICON
NPN TRANSISTOR
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9729
Issue 1
Page 1 of 3
BFY52
• V(BR)CEO = 20V (Min).
• Hermetic TO-39 Metal Package.
• Ideally Suited General Purpose Amplifier Applications
•
Screening Options Available
•
ABSOLUTE MAXIMUM RATINGS
(TA = 25°C unless otherwise stated)
VCBO Collector – Base Voltage 40V
VCEO Collector – Emitter Voltage 20V
VEBO Emitter – Base Voltage 6V
IC Continuous Collector Current 1.0A
PD Total Power Dissipation at TA = 25°C 0.8W
Derate Above 25°C 4.57mW/°C
PD Total Power Dissipation at TC = 25°C 5W
Derate Above 25°C 28.6mW/°C
TJ Junction Temperature Range -65 to +200°C
Tstg Storage Temperature Range -65 to +200°C
THERMAL PROPERTIES
Symbols Parameters Max. Units
RθJA Thermal Resistance, Junction To Ambient 218.75 °C/W
RθJC
Thermal Resistance, Junction To Case 35 °C/W
SILICON
NPN TRANSISTOR
BFY52
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9729
Issue 1
Page 2 of 3
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ Max.
Units
V(BR)CEO
(1)
Collector-Emitter
Breakdown Voltage IC = 10mA IB = 0 20
V(BR)CBO Collector-Base
Breakdown Voltage IC = 10µA IE = 0 40
V(BR)EBO Emitter-Base
Breakdown Voltage IE = 10µA IC = 0 6
V
VCB = 30V IE = 0 50 nA
ICBO Collector Cut-Off Current
TA = 100°C 2.5 µA
VEB = 5V IC = 0 50 nA
IEBO Emitter Cut-Off Current
TA = 100°C 2.8 µA
IC = 10mA VCE = 6V 30
IC = 150mA VCE = 6V 60
hFE
(1)
Forward-current transfer
ratio
IC = 1.0A VCE = 6V 15
IC = 150mA IB = 15mA 0.35
VCE(sat)
(1)
Collector-Emitter Saturation
Voltage IC = 1.0A IB = 100mA 1.6
VBE(sat)
(1)
Base-Emitter Saturation
Voltage IC = 1.0A IB = 100mA 2
V
DYNAMIC CHARACTERISTICS
IC = 1.0mA VCE = 6V
hfe Small-Signal Current Gain
f = 1.0KHz
30
IC = 50mA VCE = 6V
fT Transition Frequency
f = 20MHz
50 MHz
VCB = 12V IE = 0
Cobo Output Capacitance
f = 1.0MHz
12 pF
Notes
NotesNotes
Notes
(1) Pulse Width ≤ 380us, δ ≤ 2%
SILICON
NPN TRANSISTOR
BFY52
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9729
Issue 1
Page 3 of 3
MECHANICAL DATA
Dimensions in mm (inches)
TO
-
39 (TO
-
205AD
) METAL PACKAGE
Underside View
Pin 1 - Emitter Pin 2 - Base Pin 3 - Collector
0.89
(0.035)max.
12.70
(0.500)
min. 0.41 (0.016)
0.53 (0.021)
dia.
5.08 (0.200)
typ.
0.71 (0.028)
0.86 (0.034)
2.54
(0.100)
45°
6.10 (0.240)
6.60 (0.260)
8.51 (0.34)
9.40 (0.37)
7.75 (0.305)
8.51 (0.335)
123
0.74 (0.029)
1.14 (0.045)
