Amphenol Cable Glands and Cord Grips (R) 12-055 Amphenol Table of Contents Introduction Amphenol(R) Cable Glands Page Number 1 2-3 ATEX Approved Glands Featuring Elastometric Seals EX-20 4-5 EX-25 6-7 EE-30 8-9 EX-35 10-11 EX-40 12-13 EX-45 14-15 EE-RG 16-17 ATEX Approved Glands Featuring Elastometric Seals for Flat Cable EX-50 18-19 EX-55 20-21 ATEX Approved Barrier Glands EX-60 22-23 EX-65 24-25 EX-70 26-27 EX-75 Stopper Box 28-29 Industrial Glands CGA 30-31 CGSS 32-33 CGDS 34-35 CGU 36-37 Accessories ARAdaptors & Reducers 38-39 Nylon Adaptors & Reducers 40-41 Insulated Adaptors 42-43 Mushroom Head Stopping Plugs 44-45 Nylon Mushroom Head Stopping Plugs 46-47 Type A & Type B Stopping Plugs 48-49 Breather Drain 50-51 Locknuts, Earth Tags, etc. 52 Entry Thread Reference Tables 53 Ingress Protection, Gland Weight Data 54 (R) (R) 55 Cord Grip Specifications 56-57 DB/DBM Group 58-59 DBZ Group 60-61 DBL/DBZL Group 62-63 DBA Group 64-65 DBF Group, Flared Nipples 66-67 DBZP Series 68-69 Grommets 70-71 Accessories 72-73 Amphenol /Pyle Cord Grips Addtional Amphenol(R) Industrial Products Amphenol Sales Offices and Distributors Listing 74-75 76 For further information on your individual application requirements, contact: Amphenol Corporation Amphenol Industrial Operations 40-60 Delaware Avenue Sidney, New York 13838-1395 Phone: 607-563-5011 Fax: 607-563-5351 View and download or print Amphenol catalogs on-line at: www.amphenol-industrial.com Amphenol operates quality systems that are certified to ISO 9001:2000 by third party registrars. For product specific questions regarding RoHS compliance, consult Amphenol Industrial Operations, or call the RoHS Product Compliance and Technical Support line: 1-866-315-8559 Amphenol Industrial Operations Amphenol(R) Cable Glands and Cord Grips Amphenol Industrial offers more choices, more solutions, and more options than any other interconnect manufacturer in the world. In addition to the broadest range of connector solutions in the market, we also offer an extensive line of Explosion Proof and General Duty Cable Glands. We also carry a complete line of liquid tight strainrelief products in our Cord Grip line of performance cable seals. Our combination of Glands and Cord Grips makes Amphenol Industrial the one stop supplier for all your connector and cable sealing solutions. Cable Glands Amphenol Industrial Operations, the worldwide leader of explosion proof and hazardous environment interconnects, introduces our broad range of explosion proof and industrial cable glands. The new Cable Gland product line is designed toperform in the most demanding environments. Amphenol's complete line of EX Zone 1 and 2 rated cable glands offers our customers great flexibility. In addition, we have a complete line of general duty industrial application cable glands suitable for armored and unarmored cable. * SIRA/ATEX certified to Exd/Exe (Class I, Div. I) * CSA Approved * IP66/68; Deluge; NEMA rated products * Temperature Ranges from -40F to +180F * Brass and Stainless Steel available. Amphenol Cable Glands are RoHS Compliant. Cord Grips Whether you need a straight, 45, or 90 strain relief, Amphenol's family of cord Grips has you covered. Strong, lightweight aluminum components provide a long lasting, reliable liquid tight solution. Amphenol Industrial Cord Grips offer a complete line of strain relief options that include gland nuts, mechanical clamps and basketweave cable grips. UL and CSA listed, our Cord Grips have been put to the test for over 40 years. * Tapered rubber grommets and seal * Machined Components * Male and female threads available * Tapered conduit threads Amphenol Cord Grips are available with RoHS Compliant options. Please contact Amphenol Industrial Operations for information. 1 Amphenol Cable Glands and Cord Grips Amphenol Explosion Proof and Industrial Cable Glands This section will provide you with information on Amphenol's complete family of cable glands, and will assist you in determining which of our glands will satisfy your specific need. If you have further questions, please contact our factory or one of the Amphenol Industrial distributors listed in the back of this catalog. Amphenol Industrial Operations, the recognized leader in explosion proof and hazardous environment interconnects, offers a complete line of Industrial and Explosion Proof Glands. Whether part of an integrated connector solution, or as part of a bulkhead feed through, Amphenol has the solution you are looking for. Our product range includes general duty industrial cable glands meant to seal on unarmored cable, right up to our ATEX approved EX glands capable of protecting the most rugged cable in your zone rated applications. Our EX Approved Glands also provide a complete zone rated interconnect solution when used in conjunction with our ATEX approved Star-Line EX explosion proof connector series. For additional information on the Star-Line EX product, consult Amphenol catalog 12-054. Features & Benefits ATEX and CSA Certified: Approved to perform in the most hazardous environments. Variety of Styles: Cable glands available to accommodate any cable type. IP Ratings Included: Watertight seals allow for both indoor and outdoor applications. Machined Components made from brass and stainless steel. Complete Line of Accessories: Including locknuts, washers, and earth tags. Entry Thread Flexibility: Both metric and NPT threads available on most styles. Applications * Oil and Gas Exploration Equipment * Machine and Heavy Electronics * Pharmaceutical Manufacturing Facilities * Production Platforms * Chemical and Paint Manufacturing Facilities * Robotics and Welding Equipment * Process Control Equipment * Motors and Generators 2 Amphenol Cable Glands Cable Gland Selection Guide This table is designed to be a quick reference to the cable glands found in this publication. Gland Type Outer Seal Inner Seal Lead Option Armor Clamp Certification IP Rating Page Number ATEX/CSA Approved Glands with Elastomeric Seals EX-20 Exd/Exe Deluge, IP66, 68 NEMA, 4X 4 EX-25 Exd/Exe (Not CSA) IP66, IP67 6 EE-30 Exe IP66 8 (Not CSA) EX-35 Exd/Exe IP66 IP68 NEMA 4X 10 EX-40 x2 Exd/Exe IP66 IP68 NEMA 4X 12 EX-45 Exd/Exe IP66 IP68 NEMA 4X 14 EE-RG Exe IP66 IP68 16 ATEX/CSA Approved Glands with Elastomeric Seals for Flat Cable EX-50 Flat Cable Flat Cable Braid Exd/Exe IP66 18 EX-55 Flat Cable Exd/Exe IP68 20 ATEX Approved Compound Filled Barrier Glands EX-60 EX-65 Compound Exd Deluge, IP66, IP68 NEMA, 4X 22 Compound Compound Exd Deluge, IP66, IP68 24 NEMA, 4X EX-70 Compound Exd Deluge, IP66, IP68 26 NEMA, 4X EX-75 Compound Exd (stopper box) Deluge, IP66, IP68 28 NEMA, 4X Non Hazardous Industrial Glands CGA Industrial (BS6121) IP30 30 CGSB Industrial IP66 32 CGDS Industrial IP67 34 CGU Industrial IP66, IP66 36 www.amphenol-industrial.com 3 ATEX/CSA Approved Glands with Elastomeric Seals EX-20 EX-20 type glands provide a seal on the inner sheath, a seal on the outer sheath, an entry thread seal and a universal armor clamp for armored cable. The armor clamp provides an electrical bond between the cable armor and the gland. EX-20 glands can also be used to terminate unarmored or lead sheathed cables. EX-20 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection; IP66, 68 to 25 meters and is deluge resistant. An integral `O' ring entry thread seal is fitted to metric versions as standard. EXAMPLE PART NUMBER EX-20 W X Y R YY ZZ [W] - [X] [Y] [R] [YY] [ZZ] Gland material (B = Brass / S = Stainless Steel) Seal Material (1 = Neoprene / 3 = Silicone) Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) Reduced bore option Gland size (Cable Range) Entry thread B A D Sample: EX-20-B-1-0-R-20-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 & EN 50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd IIC/Exe II 4X, Class 1, Zone 1 Sira 05ATEX1120X - Ex Notified Body No. 0518 Pending GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-20-B-1-0-R-20-M20 XX Sira 05ATEX1120X II 2GD EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-20 type glands will only maintain Flameproof Exd integrity when used with cable that is substantially round and compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use Type EX-20 Gland IIC, IIB, IIA NO Any Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 liters or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 and IP68 @ 25 meters, Enclosure Type 4X Meets the requirements of DTS01 1991 OPERATING TEMPERATURES Standard Seals -20C to +85C Extended Seals - 60C to +180C (Silicone seals) MATERIALS Brass CZ121 (EX-20-B) 316 Stainless Steel (EX-20-S) Inner and outer sheath material: Standard (EX-20-W-1) Neoprene, black. Option (EX-20-W-3) Silicone, white. Reduced bore outer sheath seal (R) Silicone, red (EX-20-W-X-Y-R) Entry thread seal: Nitrile is supplied with neoprene seal version. Silicone is supplied with silicone seal version 4 C THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) PLATING Extended operating temperature -60C to +180C, halogen free versions: Brass (EX-20-B-3); 316 Stainless Steel (EX-20-S-3) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC) Gland and accessory kits: K1- includes gland, locknut, earthtag, nylon IP washer and PVC shroud Gland Size Entry Threads Entry Thread Length Max Max Across Protrusion Corners Length Cable Inner Sheath [C] Min Metric NPT/BSP [B] Gland Seal Range Cable Outer Sheath [D] Standard Reduced (R) Max Min Max Min Armor Acceptance Range Shroud Size Max [A] 16 M20 N1 or N2 16 28.0 78.0 3.4 8.4 9.0 13.5 6.7 10.3 0.15 - 1.25 L24 20s M20 N1 or N2 16 28.0 78.0 7.2 11.7 11.5 16.0 9.4 12.5 0.15 - 1.25 L24 20 M20 N1 or N2 16 33.0 78.0 9.4 14.0 15.5 21.1 12.0 17.6 0.15 - 1.25 EL30 25 M25 N2 or N3 16 41.4 90.0 13.5 20.0 20.3 27.4 16.8 23.9 0.15 - 1.60 EL38 32 M32 N3 or N4 16 50.6 105.0 19.5 26.3 26.7 34.0 23.2 30.5 0.15 - 2.00 EL46 40 M40 N4 or N5 16 60.5 113.0 23 32.2 33.0 40.6 28.6 36.2 0.20 - 2.00 EL55 50s M50 N5 or N6 16 71.5 125.0 28.1 38.2 39.4 46.7 34.8 42.4 0.30 - 2.50 EL65 50 M50 N6 16 71.5 125.0 33.1 44.1 45.7 53.2 41.1 48.5 0.30 - 2.50 EL65 63s M63 N6 or N7 19 88.0 125.0 39.2 50.1 52.1 59.5 47.5 54.8 0.30 - 2.50 EL80 63 M63 N7 19 88.0 125.0 46.7 56.0 58.4 65.8 53.8 61.2 0.30 - 2.50 EL80 75s M75 N7 or N8 19 99.0 131.0 52.1 62.0 64.8 72.2 60.2 68.0 0.30 - 2.50 EL90 75 M75 N8 19 99.0 131.0 58.0 68.0 71.1 78.0 66.5 73.4 0.30 - 2.50 EL90 80 M80 x 2 N8 or N9 25 115.2 170.0 62.2 72.0 77.0 84.0 - - 0.45 - 3.15 L104 80H M80 x 2 N8 or N9 25 115.2 170.0 62.2 72.0 79.6 90.0 - - 0.45 - 3.15 L104 85 M85 x 2 N8 or N9 25 115.2 170.0 69.0 78.0 79.6 90.0 75.0 85.4 0.45 - 3.15 L104 90 M90 x 2 N9 or N10 25 125.7 170.0 74.0 84.0 88.0 96.0 - - 0.45 - 3.15 L114 90H M90 x 2 N9 or N10 25 125.7 170.0 74.0 84.0 92.0 102.0 - - 0.45 - 3.15 L114 100 M100 x 2 N9 or N10 25 125.7 170.0 82.0 90.0 92.0 102.0 87.4 97.4 0.45 - 3.15 L114 All Dimensions are in millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-20 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. * When used to terminate unarmored cable, the gland is suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting. 5 ATEX/CSA Approved Glands with Elastomeric Seals EX-25 EX-25 type glands provide a seal on the inner sheath, a seal on the outer sheath and an armor specific clamp for armored cable. The armor clamp provides an electrical bond between the cable armor and the gland. EX-25 type connectors can be used to terminate lead sheath cables. EX-25 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66, IP67. EXAMPLE PART NUMBER EX-25* * W X Y R YY ZZ [W] [X] [Y] [R] [YY] [ZZ] - Armor Types (W = SWA / X = SWB / Z = STA) - Gland material (B = Brass / S = Stainless Steel) - Seal Material (1 = Neoprene / 3 = Silicone / 4 = No Seal) - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) - Reduced bore option - Gland size (Cable Range) - Entry Thread B A D C Sample: EX-25-W-B-1-0-R-20-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 and EN 50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II SIRA 05ATEX1122X - Ex Notified Body No. 0518 GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-25W-B-1-0-R-20-M20 XX SIRA 05ATEX1122X II 2GD IP67 EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-25 type glands will only maintain Flameproof Exd integrity when used with cable that is substantially round and compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use Type EX-25 Gland IIC, IIB, IIA NO Any Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 litres or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 and IP67 OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +180C VARIATIONS Omission of outer seal: Brass (EX-25*-B-4); 316 Stainless Steel (EX-25-*-S-4) MATERIALS Brass CZ121 (EX-25-*-B) 316 Stainless Steel (EX-25-*-S) 6 SEALS Extended operating temperature -60C to +180C, halogen free versions: Brass (EX-25-B-3); 316 Stainless Steel (EX-25-S-3) THREADS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) CLAMPS PLATING SWA steel wire armor (EX-25-W) SWB woven steel wire armor (EX-25-X) STA steel tape armor (EX-25-Z) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC); PCP (EX-PCP); Low Smoke Zero Halogen (EX-LSH) Gland and accessory kits: K2 - includes gland, locknut, earthtag, fibre IP washer and PVC shroud K3 - includes gland, locknut, earthtag, nylon IP washer and PCP shroud K4 - includes brass gland, brass locknut, brass earthtag, IP washer and zero halogen shroud Gland Size Entry Threads Metric Entry Max Max Thread Across Protrusion Length Corners Length [B] [A] Cable Inner Sheath [C] Min Max Gland Seal Range Cable Outer Sheath [D] Standard Reduced (R) Min Max Min Armour Acceptance Range Shroud Size Max W NPT/BSP XZ 16 M20 N1 or N2 16 26.5 58.0 4.0 8.4 8.4 13.5 4.9 10.0 0.90 0.15-0.35 L24 20s M20 N1 or N2 16 26.5 58.0 8.0 11.7 11.5 16.0 9.4 12.5 0.90-1.25 0.15-0.35 L24 20 M20 N1 or N2 16 33.0 58.0 6.7 * 14.0 15.5 21.1 12.0 17.6 0.90-1.25 0.15-0.50 L30 25 M25 N2 or N3 16 41.4 58.0 13.0 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 L38 32 M32 N3 or N4 16 50.6 65.0 19.0 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 L46 40 M40 N4 or N5 16 60.5 72.0 25.0 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 L55 50s M50 N5 or N6 16 71.5 73.0 31.5 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 L65 50 M50 N6 16 71.5 73.0 36.5 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 L65 63s M63 N6 or N7 19 88.0 76.0 42.5 50.1 52.1 59.5 47.5 54.8 2.50 0.30-0.80 L80 63 M63 N7 19 88.0 76.0 49.5 56.0 58.4 65.8 53.8 61.2 2.50 0.30-0.80 L80 75s M75 N7 or N8 19 99.0 82.0 54.5 62.0 64.8 72.2 60.2 68.0 2.50 0.30-1.00 L90 75 M75 N8 19 99.0 82.0 60.5 68.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 L90 80 M80 x 2 N8 or N9 25 115.2 110.0 62.2 72.0 77.0 84.0 - - 3.15 0.45-1.00 L104 80H M80 x 2 N8 or N9 25 115.2 110.0 62.2 72.0 79.6 90.0 - - 3.15 0.45-1.00 L104 85 M85 x 2 N8 or N9 25 115.2 110.0 69.0 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 L104 90 M90 x 2 N9 or N10 25 125.7 110.0 74.0 84.0 88.0 96.0 - - 3.15 0.45-1.00 L114 90H M90 x 2 N9 or N10 25 125.7 110.0 74.0 84.0 92.0 102.0 - - 3.15 0.45-1.00 L114 100 M100 x 2 N9 or N10 25 125.7 110.0 82.0 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 L114 All Dimensions are in Millimeters NOTES: * EX-25 gland size 20, the silicone inner seal only seals to a minimum of 11.0mm and NOT 6.7mm. * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * "W" refers to the wire diameter in a steel wire armored cable. * "XZ" refers to the wire diameter in a woven steel wire armored cable or the tape thickness in a steel tape armored cable. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-25 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 7 ATEX/CSA Approved Glands with Elastomeric Seals EE-30 EE-30 type glands provide a seal on the outer sheath and an armor specific clamp for armored cable. The armor clamp provides an electrical bond between the cable armor and the gland. EE-30 type glands maintain Increased Safety Exe methods of explosion protection and IP66. EXAMPLE PART NUMBER EE-30* * W X Y R YY ZZ [W] [X] [Y] [R] [YY] [ZZ] - Armor Type (W = SWA / X = SWB / Z = STA) - Gland material (B = Brass / S = Stainless Steel) - Seal Material (1 = Neoprene / 3 = Silicone) - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) - Reduced bore option - Gland size (Cablle Range) - Entry thread B A D C Sample: EE-30W-B-1-0-R-20-M20 DESIGN STANDARD EN 50014:1998, EN 50019:2000 and EN 50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exe II SIRA 05ATEX1122X - Ex Notified Body No. 0518 GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EE-30W-B-1-0-R-20-M20 XX SIRA 05ATEX1122X II 2GD IP66 EExe II ( XX = Year Code) APPLICATION EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +180C MATERIALS Brass CZ121 (EE-30*-B) 316 Stainless Steel (EE-30*-S) SEALS Extended operating temperature -60C to +180C, halogen free versions: Brass (EE-30*-B-3); 316 Stainless Steel (EE-30*-S-3) THREADS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) CLAMPS PLATING SWA steel wire armor (EE-30-W) SWB woven steel wire armor (EE-30-X) STA steel tape armor (EE-30-Z) 8 Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC); PCP (EX-PCP); Low Smoke Zero Halogen (EX-LSH) Gland and accessory kits: K1 - includes gland, locknut, earthtag, nylon IP washer and PVC shroud K4 - includes brass gland, brass locknut, brass earthtag, IP washer and zero halogen shroud Gland Size Entry Threads Entry Max Max Thread Across Protrusion Length Corners Length [B] [A] Gland Seal Range Cable Inner Sheath [C] Min Max Cable Outer Sheath [D] Standard Reduced (R) Min Max Min Armour Acceptance Range Max W Metric Shroud Size XZ NPT/BSP 16 M20 N1 or N2 10 26.5 54.0 - 11.7 9.0 13.5 6.7 10.3 0.90-1.25 0.15-0.35 L24 20s M20 N1 or N2 10 26.5 54.0 - 11.7 11.5 16.0 9.4 12.5 0.90-1.25 0.15-0.35 L24 20 M20 N1 or N2 10 33.0 54.0 - 14.0 15.5 21.0 12.0 17.6 0.90-1.25 0.15-0.50 L30 25 M25 N2 or N3 10 41.4 54.0 - 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 L38 32 M32 N3 or N4 10 50.6 60.0 - 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 L46 40 M40 N4 or N5 15 60.5 67.0 - 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 L55 50s M50 N5 or N6 15 71.5 67.0 - 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 L65 50 M50 N6 15 71.5 67.0 - 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 L65 63s M63 N6 or N7 15 88.0 69.0 - 50.1 52.1 59.5 47.5 54.8 2.50 0.30-0.80 L80 63 M63 N7 15 88.0 69.0 - 56.0 58.4 65.8 53.8 61.2 2.50 0.30-0.80 L80 75s M75 N7 or N8 15 99.0 77.0 - 62.0 64.8 72.2 60.2 68.0 2.50 0.30-1.00 L90 75 M75 N8 15 99.0 77.0 - 68.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 L90 80 M80 x 2 N8 or N9 20 115.2 104.0 - 72.0 77.0 84.0 - - 3.15 0.45-1.00 L104 80H M80 x 2 N8 or N9 20 115.2 104.0 - 72.0 79.6 90.0 - - 3.15 0.45-1.00 L104 85 M85 x 2 N8 or N9 20 115.2 104.0 - 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 L104 90 M90 x 2 N9 or N10 20 125.7 104.0 - 84.0 88.0 96.0 - - 3.15 0.45-1.00 L114 90H M90 x 2 N9 or N10 20 125.7 104.0 - 84.0 92.0 102.0 - - 3.15 0.45-1.00 L114 100 M100 x 2 N9 or N10 20 125.7 104.0 - 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * "W" refers to the wire diameter in a steel wire armored cable. * "XZ" refers to the wire diameter in a woven steel wire armored cable or the tape thickness in a steel tape armored cable. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * Where EX-30 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 9 ATEX/CSA Approved Glands with Elastomeric Seals EX-35 EX-35 type glands provide a single pull resistant seal on the outer sheath of unarmoured cable. EX-35 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66, IP68 to 25 meters. Integral O-Ring entry thread seal, as illustrated, is provided as standard on metric versions. EXAMPLE PART NUMBER EX-35 W X Y YY ZZ [W] - [X] [Y] [YY] [ZZ] Gland material (B = Brass / S = Stainless Steel) Seal Material (1 = Neoprene / 3 = Silicone) Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) Gland size (Cable Range) Entry thread B A D Sample: EX-35-B-1-0-20-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 and EN 50281-1-1:1998 CERTIFICATION. CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd IIC/Exe II 4X, Class 1, Zone 1 SIRA 05ATEX1123X - Ex Notified Body No. 0518 Pending GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-35-B-1-0-20-M20 XX SIRA 05ATEX1123X II 2GD IP68 EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-35 type glands will only maintain Flameproof Exd integrity when used with cable that is substantially round and compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-35 Gland IIC, IIB, IIA NO 2 liters or less Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 liters or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 and IP68 @ 25 meters, Enclosure Type 4X OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +180C MATERIALS Brass CZ121 (EX-35-B) 316 Stainless Steel (EX-35-S) Outer sheath seal material: Standard (EX-35-W-1) Neoprene, black. Option (EX-35-W-3) Silicone, white. Integral entry thread seal: Nitrile is supplied with neoprene outer seal version. Silicone is supplied with silicone outer seal version. 10 THREADS SEALS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Extended operating temperature -60C to +180C, halogen free versions: Brass (EX-35-B-3); 316 Stainless Steel (EX-35-S-3) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-SPVC); PCP (EX-SPCP); Low Smoke Zero Halogen (EX-LSH) Gland and accessory kits: K2 - includes gland, locknut, fiber IP washer and PVC shroud K3- includes gland, locknut, nylon IP washer and PCP shroud Gland Size Entry Threads Entry Thread Length Max Across Corners Max Protrusion Length Gland Seal Rance Shroud Size Cable Outer/Lead Sheath [B] [A] Min Max N1 or N2 16 28.0 33.0 4.0 8.4 M20 N1 or N2 16 M20 N1 or N2 16 28.0 33.0 7.2 11.7 L24 33.0 33.0 9.6 14.0 L30 25 M25 N2 or N3 16 41.4 33.0 13.5 20.0 L38 32 M32 40 M40 N3 or N4 16 50.6 33.0 19.5 26.3 L46 N4 or N5 16 60.5 37.0 23.0 32.2 L55 50s M50 N5 or N6 16 71.5 37.0 28.2 38.2 L65 50 M50 N6 16 71.5 37.0 33.2 44.1 L65 63s M63 N6 or N7 19 88.0 37.0 39.3 50.1 L80 63 M63 N7 19 88.0 37.0 46.7 56.0 L80 75s M75 N7 or N8 19 99.0 37.0 52.3 62.0 L90 75 M75 N8 19 99.0 37.0 58.1 68.0 L90 80 M80 x 2 N8 or N9 25 115.2 50.0 62.3 72.0 L104 85 M85 x 2 N8 or N9 25 115.2 50.0 69.1 78.0 L104 Metric NPT/BSP 16 M20 20s 20 L24 90 M90 x 2 N9 or N10 25 125.7 50.0 74.1 84.0 L114 100 M100 x 2 N9 or N10 25 125.7 50.0 82.1 90.0 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-35 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 11 ATEX/CSA Approved Glands with Elastomeric Seals EX-40 EX-40 type glands provide two pull resistant seals on the outer sheath of any cable. EX-40 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66, IP68 to 25 meters. An integral O-Ring entry thread seal, as illustrated, is provided as standard on metric versions. EXAMPLE PART NUMBER EX-40 W X Y YY ZZ [W] - [X] [Y] [YY] [ZZ] Gland material (B = Brass / S = Stainless Steel) Seal Material (1 = Neoprene / 3 = Silicone) Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) Gland size (Cable Range) Entry thread A D Sample: EX-40-B-1-0-20-M20 B DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 and EN 50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd IIC/Exe II 4X, Class 1, Zone 1 SIRA 05ATEX1123X - Ex Notified Body No. 0518 Pending GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-40-B-1-0-20-M20 XX SIRA 05ATEX1123X II 2GD IP68 EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-40 type glands will only maintain Flameproof Exd integrity when used with cable that is substantially round and compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-40 Gland IIC, IIB, IIA NO Any Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 litres or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 and IP68 @ 25 meters, Enclosure Type 4X OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +180C MATERIALS Brass CZ121 (EX-40-B) 316 Stainless Steel (EX-40-S) Outer sheath seal material: Standard (EX-40-W-1) Neoprene, black. Option (EX-40-W-3) Silicone, white Integral entry thread seal: Nitrile is supplied with neoprene outer seal version. Silicone is supplied with silicone outer seal version. 12 THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) PLATING Extended operating temperature -60C to +180C, halogen free versions: Brass (EX-40-B-3); 316 Stainless Steel (EX-40-S-3) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC); PCP (EX-PCP); Low Smoke Zero Halogen (EX-LSH) Gland Size Entry Threads Entry Thread Length Max Across Corners [B] [A] N1 or N2 16 28.0 M20 N1 or N2 16 M20 N1 or N2 16 Metric NPT/BSP 16 M20 20s 20 Max Protrusion Length Gland Seal Rance Shroud Size Cable Outer/Lead Sheath Min Max 66.0 4.0 8.4 28.0 66.0 7.2 11.7 L24 29.7 66.0 9.6 14.0 L27 L24 25 M25 N2 or N3 16 39.6 66.0 13.5 20.0 L36 32 M32 N3 or N4 16 45.1 66.0 19.5 26.3 L41 40 M40 N4 or N5 16 55.9 74.0 23.0 32.2 L51 50s M50 N5 or N6 16 71.5 74.0 28.2 38.2 L65 50 M50 N6 16 71.5 74.0 33.2 44.1 L65 63s M63 N6 or N7 19 88.0 74.0 39.3 50.1 L80 63 M63 N7 19 88.0 74.0 46.7 56.0 L80 75s M75 N7 or N8 19 99.0 74.0 52.3 62.0 L90 75 M75 N8 19 99.0 74.0 58.1 68.0 L90 80 M80 x 2 N8 or N9 25 115.2 100.0 62.3 72.0 L104 85 M85 x 2 N8 or N9 25 115.2 100.0 69.1 78.0 L104 90 M90 x 2 N9 or N10 25 125.7 100.0 74.1 84.0 L114 100 M100 x 2 N9 or N10 25 125.7 100.0 82.1 90.0 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-35 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 13 . ATEX/CSA Approved Glands with Elastometric Seals EX-45 EX-45 type glands provide a seal on the outer sheath of unarmoured cable and a conduit connection thread. EX40-M type glands provide a male thread for connection and EX-40-F type glands provide a female thread for connection. EX-45 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66, IP68 to 25 metres. An `O' ring IP entry thread seal is fitted as standard. EXAMPLE PART NUMBER EX-45 A W X Y Z YY ZZ [A] - [W] [X] [Y] [YY] [ZZ] M = Male Connector / F = Female Connector Gland material (B = Brass / S = Stainless Steel) Seal Material (1 = Neoprene / 3 = Silicone) Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) Connection Thread Gland size (Cable Range) Entry thread B A D B A Sample: EX-45-F-B-1-0-M20-20-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 and EN 50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd IIC/Exe II 4X, Class 1, Zone 1 SIRA 05ATEX1123X - Ex Notified Body No. 0518 Pending GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-45-F-B-1-0-M20-20-M20 XX SIRA 05ATEX1123X II 2GD IP68 EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-45 type glands will only maintain Flameproof Exd integrity when used with cable that is substantially round and compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-45 Gland IIC, IIB, IIA NO Any Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 litres or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 and IP68 @ 25 meters, Enclosure Type 4X OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +180C MATERIALS Brass CZ121 (EX-45-A-B) 316 Stainless Steel (EX-45-A-S) Outer sheath seal material: Standard (EX-45-A-W-1) Neoprene, black. Option (EX-45-A-W-3) Silicone, white Integral entry thread seal: Nitrile is supplied with neoprene outer seal version. Silicone is supplied with silicone outer seal version. 14 D THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG PLATING Extended operating temperature -60C to +180C, halogen free versions: Brass (EX-45-A-B-3); 316 Stainless Steel (EX-45-A-S-3) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Gland Size Entry Threads Entry Thread Length Max Across Corners Gland Seal Rance Conduit Connector Cable Outer Sheath [D] [B] Metric [A] Min Max NPT/BSP NPT ISO 16 M20 N1 or N2 16 28.0 4.0 8.4 N1 or N2 M20 20s M20 N1 or N2 16 28.0 7.2 11.7 N1 or N2 M20 20 M20 N1 or N2 16 33.0 9.6 14.0 N1 or N2 M20 25 M25 N2 or N3 16 41.4 13.5 20.0 N2 or N3 M25 32 M32 N3 or N4 16 50.6 19.5 26.3 N3 or N4 M32 40 M40 N4 or N5 16 60.5 23.0 32.2 N4 or N5 M40 50s M50 N5 or N6 16 71.5 28.2 38.2 N5 or N6 M50 50 M50 N6 16 71.5 33.2 44.1 N6 M50 63s M63 N6or N7 19 88.0 39.3 50.1 N6or N7 M63 63 M63 N7 19 88.0 46.7 56.0 N7 M63 75s M75 N7 or N9 19 99.0 52.3 62.0 N7 or N9 M75 75 M75 N9 19 99.0 58.1 68.0 N9 M75 All Dimensions are in Millimeters NOTES: * Suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-35 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. * Other conduit connection threads eg PG, BSP are available upon request. 15 ATEX/CSA Approved Glands with Elastometric Seals EE-RG EE-RG type glands provide a seal on the outer sheath of unarmoured cable. EE-RG type glands maintain Increased Safety Exe method of explosion protection and IP66, IP68. EXAMPLE PART NUMBER EE-RG[X]-[ZZ] X - Material (1 = Black Polyamide 6 / 2 = Blue Polyamide 6 / 3 = Grey Polyamide 6) ZZ - Entry Thread EE-RG1-M20 DESIGN STANDARD EN50014:1997 and EN50019:2000 CERTIFICATION ATEX II 2 GD, E Exe II CERTIFICATE SIRA 00ATEX 1072 - Ex Notified Body No. 0518 GLAND MARKING Example: SIRA 00ATEX1072X EB (Cable Range) II2GD EExeII For industrial versions the hazardous area information is omitted APPLICATION Exe Equipment Gas Group II, Zones 1 and 2 INGRESS PROTECTION IP66 without a sealing washer IP68 with a sealing washer OPERATING TEMPERATURES Sizes M25 and below: -20C to +60C Sizes above M25: -10C to +60C MATERIALS Standard (EX-RG1) Black Polyamide 6 Option (EE-RG2) Blue Polyamide 6 Industrial, Non Ex Versions: Grey Polyamide 6 (EE-RG3) Note: Polyamide 6 is self extinguishing, flame retardant and halogen free Outer Seath seal material: Santoprene, black THREADS ISO Metric ACCESSORIES Locknut - Nylon (EX-NLN); Brass (EX-BLN) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) 16 Gland Size Entry Thread Length Max Across Corners Metric Gland Seal Range Cable Outer Sheath Min Max 6.0 - 9 16.5 3.5 M16 9 20.9 5.0 8.0 - 9 24.2 6.0 10.0 M20 10 26.4 8.0 13.5 - 10 28.6 10.0 15.0 M25 11 35.2 13.0 19.0 M32 12 45.1 18.0 25.0 M40 14 57.2 24.0 32.0 M50 16 64.9 29.0 38.0 M63 16 71.5 36.0 44.0 All Dimensions are in Millimeters NOTES: * Suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting * Gland sizes M25 and above shall not be used for applications where there is a "high" risk of mechanical damage * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full 17 ATEX/CSA Approved Glands with Elastometric Seals for Flat Cable EX-50 EX-50 type glands provide pull resistant seals on the inner and outer sheath and a braid armor clamp. The armor clamp provides an electrical bond between the cable armor and the gland. EX-50 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66. EXAMPLE PART NUMBER EX-50 [W] [Y] [YY] [ZZ] W - Gland Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) YY - Gland Size (Cable Range) ZZ - Entry Thread B A D C Sample: EX-50-B-3-20S-M20 DESIGN STANDARD EN 50014:1998, EN 50018:2000, EN 50019:2000 and EN 50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II SIRA 05ATEX1121X - Ex Notified Body No. 0518 GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-50-B-3-20S-M20 XX SIRA 05ATEX1121X II 2GD IP66 EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-50 type glands will only maintain Flameproof Exd integrity when used with cable that has a suitable profile and is compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-50 Gland IIC, IIB, IIA NO 2 litres or less Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 litres or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 OPERATING TEMPERATURES Standard Seals - 60C to +180C MATERIALS Brass CZ121 (EX-50-B) 316 Stainless Steel (EX-50-S) PLATING THREADS Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) 18 ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Gland Size Entry Threads Metric Entry Thread Length Max Across Corners [B] [A] Gland Seal Range Max Protrusion Length Cable Inner Sheath [C] Width Thickness Min Max Min Max Cable Outer Sheath [D] Width Min Max Thickness Min Max Armor Acceptance Range [X] 20s M20 16 26.5 58.0 6.3 11.7 4.0 7.0 7.9 11.7 4.5 7.0 0.1-0.3 20R M20 16 33.0 58.0 8.1 13.5 5.8 6.2 7.5 16.1 3.0 8.3 0.1-0.45 20 M20 16 33.0 58.0 10.3 13.5 5.6 9.0 11.0 13.5 4.5 9.0 0.1-0.3 All Dimensions are in Millimeters NOTES: * Gland Size does not necessarily equate to the entry thread size. * "X" refers to the wire diameter in a braided cable. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-50 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 19 ATEX/CSA Approved Glands with Elastometric Seals for Flat Cable EX-55 EX-55 type glands provide a single pull resistant seal on the outer sheath of unarmoured flat cable. EX-55 type glands maintain Flameproof Exd and Increased Safety Exe methods of explosion protection and IP68 to 25 meters. EXAMPLE PART NUMBER B EX-55 [W] [Y] [YY] [ZZ] W - Gland Material(B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) YY - Gland Size (Cable Range) ZZ - Entry Thread A D EX-55-B-3-20S-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 and EN50281-1-1:1998 CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II SIRA 05ATEX1121X - Ex Notified Body No. 0518 GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-55-B-3-20S-M20 XX SIRA 05ATEX1121X II 2GD IP68 EExdIIC / EExe II (XX = Year Code) APPLICATION EExd Equipment EX-55 type glands will only maintain Flameproof Exd integrity when used with cable that has a suitable profile and is compact with extruded bedding. The cable shall be deemed to be effectively filled. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-55 Gland IIC, IIB, IIA NO Any Zone 1 or 2 YES IIB, IIA YES Any Zone 2 YES IIB, IIA YES 2 litres or less Zone 1 YES EExe Equipment Gas Group II, Zones 1 and 2 Other Equipment Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP68 @ 25 meters OPERATING TEMPERATURES Standard Seal - 60C to +180C (Silicone seal) MATERIALS Brass CZ121 (EX-55-B) 316 Stainless Steel (EX-55-S) Outer sheath seal material: Silicone, red or white THREADS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) 20 ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Gland Size Entry Threads Entry Thread Length Max Across Corners Gland Seal Range Cable Outer Sheath [D] Metric [B] [A] Min Max Width Thickness Min Max 20s M20 16 26.5 6.3 11.7 4.0 7.0 20R M20 16 33.0 8.1 13.5 5.8 6.2 20 M20 16 33.0 10.3 13.5 5.6 9.0 All Dimensions are in Millimeters NOTES: * Suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * Where EX-55 type glands are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 21 ATEX / CSA Approved Compound Filled Barrier Glands EX-60 EX-60 type glands provide a Flameproof EExd compound filled barrier, a seal on the outer sheath, a universal armor clamp for armored, screened or braided cable and an entry thread seal. The armor clamp provides an electrical bond between the cable armor, screen or braid and the gland. EX-60 type glands maintain EExd Flameproof method of explosion protection; IP66, 68 to 100 meters and is deluge resistant. EXAMPLE PART NUMBER EX-60 [W] [Y] [R] [YY] [ZZ] W - Gland Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) R - Reduced bore option YY - Gland Size (Cable Range) ZZ - Entry Thread B A D EX-60-B-1-R-20S-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, EN50019:2000 and EN50281-1-1:1998 IEC 60079-0 (2000-06), IEC 60079-1 (2001-02) CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd I & IIC 4X, Class 1, Zone 1 SIRA 05SIRA1124X - Ex Notified Body No. 0518 Pending GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-60-B-1-R-20S-M20 XX SIRA 05ATEX1124X I M2 II 2GD EExd I & IIC IP68 (XX = Year Code) APPLICATION EExd Equipment EX-60 type Glands will maintain Flameproof Exd integrity when used with any armored or unarmored cable types. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-60 Gland I, IIC, IIB, IIA YES Any Zone 1 or 2 YES Other Equipment Mining Equipment Group I, M2 Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 & IP68 @ 100 Meters Meets the requirements of DTS01 1991 CURING TIME @ 21C Conductor termination can be effected after 1 hour The equipment can be energised after 4 hours The compound chamber can be inspected after 4 hours OPERATING TEMPERATURES - 60C to +85C 22 C MATERIALS Brass CZ121 (EX-60-B) 316 Stainless Steel (EX-60-S) Inner LSOH compound Standard outer sheath seal is LSOH silicone, white (EX-60-W-Y) Reduced bore outer sheath seal is LSOH silicone, red (EX-60-W-Y-R) Entry thread Seal: Red LSOH silicone THREADS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC) Gland and accessory kits: K5- includes gland, locknut, earthtag, integral IP "O" ring & PVC shroud Gland Size Entry Threads Entry Thread Length Max Max Across Protrusion Corners Length [B] [A] GlandSeal Range Cable Inner Cable Outer Sheath [D] Standard Reduced (R) Sheath / Cores [C] Max Max No. of Over Metric NPT/BSP 16 M20 N1 or N2 16 28.0 72.0 20s M20 N1 or N2 16 28.0 20 M20 N1 or N2 16 33.0 Armor Acceptance Range Max Inner Min Max Min Max 6.7 10.3 0.15 - 1.25 Shroud Size 7 9.0 11.7 9.0 13.5 L24 72.0 8 10.4 11.7 11.5 16.0 9.4 12.5 0.15 - 1.25 L24 73.0 14 12.5 14.0 15.5 21.1 12.0 17.6 0.15 - 1.25 EL30 25 M25 N2 or N3 16 41.4 83.0 25 17.8 20.0 20.3 27.4 16.8 23.9 0.15 - 1.60 EL38 32 M32 N3 or N4 16 50.6 103.0 50 23.5 26.3 26.7 34.0 23.2 30.5 0.15 - 2.00 EL46 40 M40 N4 or N5 16 60.5 105.0 80 28.8 32.2 33.0 40.6 28.6 36.2 0.20 - 2.00 EL55 50s M50 N6 16 71.5 115.0 100 34.2 38.2 39.4 46.7 34.8 42.4 0.20 - 2.50 EL65 50 M50 N6 16 71.5 115.0 100 39.4 44.1 45.7 53.2 41.1 48.5 0.20 - 2.50 EL65 63s M63 N7 19 88.0 115.0 120 44.8 50.1 52.1 59.5 47.5 54.8 0.30 - 2.50 EL80 63 M63 N7 19 88.0 115.0 120 50.0 56.0 58.4 65.8 53.8 61.2 0.30 - 2.50 EL80 75s M75 N8 19 99.0 122.0 140 55.4 62.0 64.8 72.2 60.2 68.0 0.30 - 2.50 EL90 75 M75 N8 19 99.0 122.0 140 60.8 68.0 71.1 78.0 66.5 73.4 0.30 - 2.50 EL90 80 M80x2 N8 or N9 25 115.2 162.0 160 64.4 72.0 77.0 84.0 - - 0.45 - 3.15 L104 85 M85x2 N8 or N9 25 115.2 162.0 180 69.8 78.0 79.6 90.0 75.0 85.4 0.45 - 3.15 L104 90 M90x2 N9 or N10 25 125.7 166.0 200 75.1 84.0 88.0 96.0 - - 0.45 - 3.15 L114 100 M100x2 N9 or N10 25 125.7 166.0 220 80.5 90.0 92.0 102.0 87.4 97.4 0.45 - 3.15 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * If EX-60 type glands are fitted into non-metallic enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 23 ATEX / CSA Approved Compound Filled Barrier Glands EX-65 EX-65 type glands provide a Flameproof EExd compound filled barrier and an entry thread seal. EX-65 type glands maintain EExd Flameproof method of explosion protection; IP66, 68 to 100 meters and is deluge resistant. EXAMPLE PART NUMBER EX-65 [W] [Y] [YY] [ZZ] W - Gland Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) YY - Gland Size (Cable Range) ZZ - Entry Thread B A D EX-65-B-1-20S-M20 DESIGN STANDARD. EN50014:1998, EN50018:2000, & EN50281-1-1:1998 IEC 60079-0 (2000-06), IEC 60079-1 (2001-02) CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd I & IIC/Exe II 4X, Class 1, Zone 1 SIRA 05ATEX1124X - Ex Notified Body No. 0518 Pending GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-65-B-1-20S-M20 XX SIRA 05ATEX1124X I M2 II 2GD EExd I & IIC IP68 (XX = Year Code) APPLICATION EExd Equipment EX-65 type Glands will maintain Flameproof Exd integrity when used with any armored or unarmored cable types. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-65 Gland I, IIC, IIB, IIA YES Any Zone 1 or 2 YES Other Equipment Mining Equipment Group I, M2 Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 & IP68 @ 100 Meters Meets the requirements of DTS01 1991 CURING TIME @ 21C Conductor termination can be effected after 1 hour The equipment can be energised after 4 hours The compound chamber can be inspected after 4 hours OPERATING TEMPERATURES -60C to +85C 24 C MATERIALS Brass CZ121 (EX-65-B) 316 Stainless Steel (EX-65-S) Inner LSOH compound Entry thread Seal: Red LSOH silicone PLATING THREADS Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC) Gland and accessory kits: K5- includes gland, locknut, earthtag, integral IP "O" ring & PVC shroud Gland Size Entry Threads Entry Thread Length Max Across Corners [B] [A] Max Protrusion Length Gland Seal Range Cable Sheath / Cores Shroud Size Max No. of Cores Max Over Cores [C] Max Sheath Diameter [D] Metric NPT/BSP 20s M20 N1 or N2 16 28.0 42.0 8 10.4 11.7 L24 20 M20 N1 or N2 16 33.0 44.0 14 12.5 14.0 L20 25 M25 N2 or N3 16 41.4 48.0 25 17.8 20.0 L38 32 M32 N3 or N4 16 50.6 53.0 50 23.5 26.3 L46 40 M40 N4 or N5 16 60.5 54.0 80 28.8 32.2 L55 50 M50 N6 16 71.5 54.0 100 39.4 44.1 L65 63 M63 N7 19 88.0 55.0 120 50.0 56.0 L80 75 M75 N8 19 99.0 60.0 140 60.8 68.0 L90 80 M80x2 N8 or N9 25 115.2 80.0 160 64.4 72.0 L104 85 M85x2 N8 or N9 25 115.2 80.0 180 69.8 78.0 L104 90 M90x2 N9 or N10 25 125.7 85.0 200 75.1 84.0 L114 100 M100x2 N9 or N10 25 125.7 85.0 220 80.5 90.0 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * If EX-65 type glands are fitted into non-metallic enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 25 ATEX / CSA Approved Compound Filled Barrier Glands EX-70 EX-70 type glands provide a Flameproof EExd compound filled barrier, a secondary weather seal on the outer sheath and an entry thread seal. EX-70 type glands maintain EExd Flameproof method of explosion protection; IP66, 68 to 100 meters and is deluge resistant. EXAMPLE PART NUMBER EX-70 [W] [Y] [YY] [ZZ] W - Gland Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) YY - Gland Size (Cable Range) ZZ - Entry Thread B A D EX-70-B-1-20S-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, & EN50281-1-1:1998 IEC 60079-0 (2000-06), IEC 60079-1 (2001-02) CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd I & IIC/Exe II 4X, Class 1, Zone 1 SIRA 05ATEX1124X - Ex Notified Body No. 0518 GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-70-1-20S-M20 XX SIRA 05ATEX1124X I M2 II 2GD EExd I & IIC IP68 APPLICATION EExd Equipment EX-70 type Glands will maintain Flameproof Exd integrity when used with any armored or unarmored cable types. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-70 Gland I, IIC, IIB, IIA YES Any Zone 1 or 2 YES Other Equipment Mining Equipment Group I, M2 Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 & IP68 @ 100 Meters Meets the requirements of DTS01 1991 CURING TIME @ 21C Conductor termination can be effected after 1 hour The equipment can be energised after 4 hours The compound chamber can be inspected after 4 hours OPERATING TEMPERATURES -60C to +85C 26 C MATERIALS Brass CZ121 (Ex-70-B) 316 Stainless Steel (EX-70-S) Inner LSOH compound Entry thread Seal: Red LSOH silicone THREADS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC) Gland and accessory kits: K5- includes gland, locknut, integral IP "O" ring & PVC shroud Gland Size Entry Threads Entry Thread Length Max Across Corners [B] [A] Max Protrusion Length Gland Seal Range Cable Inner Sheath / Cores [C] Cable Outer Sheath [D] Max No. of Cores Max Over Cores Max Sheath Diameter Min Max 7 8.4 8.4 3.4 8.4 Shroud Size Metric NPT/BSP 16 M20 N1 or N2 16 28.0 73.0 20s M20 N1 or N2 16 28.0 73.0 8 10.4 11.7 4.8 11.7 L24 20 M20 N1 or N2 16 33.0 73.0 14 12.5 14.0 9.5 14.0 EL30 25 M25 N2 or N3 16 41.4 74.0 25 17.8 20.0 11.7 20.0 EL38 32 M32 N3 or N4 16 50.6 80.0 50 23.5 26.3 18.1 26.3 EL46 40 M40 N4 or N5 16 60.5 87.0 80 28.8 32.2 22.6 32.2 EL55 50s M50 N6 16 71.5 87.0 100 34.2 38.2 28.2 38.2 EL65 L24 50 M50 N6 16 71.5 87.0 100 39.4 44.1 33.1 44.1 EL65 63s M63 N7 19 88.0 88.0 120 44.8 50.1 39.3 50.1 EL80 63 M63 N7 19 88.0 88.0 120 50.0 56.0 46.7 56.0 EL80 75s M75 N8 19 99.0 97.0 140 55.4 62.0 52.3 62.0 EL90 75 M75 N8 19 99.0 97.0 140 60.8 68.0 58.0 68.0 EL90 80 M80x2 N8 or N9 25 115.2 123.0 160 64.4 72.0 61.9 72.0 L104 85 M85x2 N8 or N9 25 115.2 123.0 180 69.8 78.0 69.1 78.0 L104 90 M90x2 N9 or N10 25 125.7 123.0 200 75.1 84.0 74.1 84.0 L114 100 M100x2 N9 or N10 25 125.7 123.0 220 80.5 90.0 81.8 90.0 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * If EX-70 type glands are fitted into non-metallic enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 27 ATEX / CSA Approved Compound Filled Barrier Glands EX-75 EX-75 type glands provide a Flameproof EExd compound filled barrier seal on the cables individual conductors within a conduit. It also provides an entry thread seal. EX-75 type glands maintain EExd Flameproof method of explosion protection; IP66, 68 to 100 meters and is deluge resistant. EXAMPLE PART NUMBER EX-75 [W] [Y] [YY] [ZZ1] [ZZ2] W - Gland Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) YY - Gland Size (Cable Range) ZZ1 - Male Thread ZZ2 - Female Entry Thread MATING CONDUIT OR CABLE GLAND A B D EX-75-B-1-20S-M20 DESIGN STANDARD EN50014:1998, EN50018:2000, & EN50281-1-1:1998 IEC 60079-0 (2000-06), IEC 60079-1 (2001-02) CERTIFICATION CERTIFICATE ATEX II 2 GD, E Exd IIC / E Exe II CSA Exd I & IIC/Exe II 4X, Class 1, Zone 1 SIRA 03ATEX1479X - Ex Notified Body No. 0518 GLAND MARKING CENELEC and ATEX Example: Amphenol 13838 USA EX-75-B-1-20S-M20 XX SIRA05ATEX1120X I M2 II 2GD EExd I & IIC IP68 APPLICATION EExd Equipment EX-75 type Glands will maintain Flameproof Exd integrity when used with any armored or unarmored cable types. Ref: IEC60079-14:2002 Section 10.4.2 Gas Group Internal Ignition Source Enclosure Volume Which Zone Use EX-75 Gland I, IIC, IIB, IIA YES Any Zone 1 or 2 YES Other Equipment Mining Equipment Group I, M2 Ignitable Dust, Zones 21 and 22 INGRESS PROTECTION IP66 & IP68 @ 100 Meters Meets the requirements of DTS01 1991 CURING TIME @ 21C Conductor termination can be effected after 1 hour The equipment can be energised after 4 hours The compound chamger can be inspected after 4 hours OPERATING TEMPERATURES -60C to +85C 28 C MATERIALS Brass CZ121 (EX-75-B) 316 Stainless Steel (EX-75-S) Inner LSOH compound Entry thread Seal: Red LSOH silicone THREADS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Fitting Size Ref Male Entry Female Entry Entry Thread Length Max Across Corners Metric NPT Metric NPT [B] [A] 20 M20 N1 or N2 M20 N1 or N2 16 33.0 25 M25 N2 or N3 M25 N2 or N3 16 41.4 32 M32 N3 or N4 M32 N3 or N4 16 40 M40 N4 or N5 M40 N4 or N5 16 50 M50 N6 M50 N6 63 M63 N7 M63 N7 Max Protrusion Length Sealing Range Cable Conductors / Cores Max No. of Cores Max Over Cores [C] Max Cable Inside Fitting [D] 57.0 14 12.5 14.0 63.0 25 17.8 20.0 50.6 67.0 50 23.5 26.3 60.5 68.0 80 28.8 32.2 16 71.5 68.0 100 39.4 44.1 19 88.0 72.0 120 50.0 56.0 75 M75 N8 M75 N8 19 99.0 78.0 140 60.8 68.0 80 M80x2 N8 or N9 M80x2 N8 or N9 25 115.2 103.0 160 64.4 72.0 85 M85x2 N8 or N9 M85x2 N8 or N9 25 115.2 103.0 180 69.8 78.0 90 M90x2 N9 or N10 M90x2 N9 or N10 25 125.7 104.0 200 75.1 84.0 100 M100x2 N9 or N10 M100x2 N9 or N10 25 125.7 104.0 220 80.5 90.0 All Dimensions are in Millimeters NOTES: * NPT thread reference details on page 53. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Integral entry thread seal option is not available for glands with tapered entry threads. IP washers can be supplied if required. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * For Flameproof Exd applications the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads. * If EX-75 type glands are fitted into non-metallic enclosures they must be included within the earth circuit of the system. * The user should seek expert advice if intending to combine flammable gases and combustible dusts in one environment/installation. * To maintain ingress protection a thread sealant should be applied to the conduit thread. * Full assembly instructions are supplied with glands, the instructions must be read prior to installation and adhered to in full. 29 Non-Hazardous Industrial Glands CGA CGA type glands provide an integral armor clamp for armored cable. The integral armor clamp provides an electrical bond between the cable armor and the gland. CGA type glands maintain IP30. EXAMPLE PART NUMBER CG[X] X W Y YY ZZ [W] - [Y] [YY] [ZZ] Clamp Type (See Clamps) Gland Material ( B = Brass / S = Stainless Steel) Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) Gland Size (Cable Range) Entry Thread B A D D Sample: CGA-B-3-20S-M20 DESIGN STANDARD BS 6121:1989 GLAND MARKING INGRESS PROTECTION Example: BS6121 Part 1 CGA-B-3-20S-M20 Amphenol IP30 OPERATING TEMPERATURES MATERIALS -100C to +600C Brass CZ121 (CGA-B) VARIATIONS All variants of the CGA type gland feature a separate armor clamping ring to allow for inspection of the clamped armor: Brass (CGA-B) THREADS ISO Metric only CLAMPS PLATING SWA Clamping using gland body (CGA) SWA steel wire armor - clamping ring (CGL) SWB woven steel wire armor or STA steel tape armor - clamping ring (CGZ) ACCESSORIES Locknut - Brass (EX-BLN); Steel (EX-MLN) Earth Tag - Brass (EX-BET) Shroud - PVC (EX-PVC) Gland and accessory kits: K6- includes gland, steel locknut, earthtag and PVC shroud 30 Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) Gland Size Entry Threads Entry Threads Length M<ax Across Corners Max Protrusion Length Metric [B] [A] 20s M20 10 24.2 20.0 - 11.7 - 20 M20 10 29.7 20.0 - 14.0 25 M25 10 45.1 22.0 - 20.0 32 M32 10 50.6 25.0 - 40 M40 15 60.5 30.0 50 M50 15 71.5 63 M63 15 75 M75 80 M80 85 M85 90 M90 100 M100 Cable Inner Sheath [C] Min Gland Seal Range Cable Outer Sheath [D] Max Min Armor Acceptance Range Max Shroud Size W XZ Clamp Ring Version Only 16.0 0.90-1.25 0.15-0.35 S22 - 21.0 0.90-1.25 0.15-0.50 S27 - 27.4 1.25-1.60 0.15-0.50 S36 26.3 - 34.0 1.60-2.00 0.15-0.55 S41 - 32.2 - 40.6 1.60-2.00 0.20-0.60 L55 32.0 - 44.1 - 53.2 2.00-2.50 0.20-0.60 L65 88.0 42.0 - 56.0 - 65.8 2.50 0.30-0.80 L80 15 99.0 50.0 - 68.0 - 78.0 2.50 0.30-1.00 L90 20 115.2 50.0 - 72.0 - 84.0 3.15 0.45-1.00 S104 20 115.2 50.0 - 78.0 - 90.0 3.15 0.45-1.00 S104 20 125.7 50.0 - 84.0 - 96.0 3.15 0.45-1.00 S114 20 125.7 50.0 - 90.0 - 102.0 3.15 0.45-1.00 S114 All Dimensions are in Millimeters NOTES: * Gland Size does not necessarily equate to the entry thread size * "W" refers to the wire diameter in a steel wire armored cable * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * Shroud sizes above are for CGA type only. * Full assembly instructions are available upon request, the instructions should be read prior to installation and adhered to in full 31 Non Hazardous Industrial Glands CGSB or CGSS CGSB and CGSS type glands provide a seal on the outer sheath and an armor specific clamp for armored cable. The armor clamp provides an electrical bond between the cable armor and the gland; and maintain IP66 rating. EXAMPLE PART NUMBER CGSB* [W] [Y] [R] [YY] [ZZ] * - Armor Type (W = SWA / X = SWB / Z = STA) W - Seal Material (1 = Neoprene / 3 = Silicone) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) R - Reduced bore option YY - Gland Size (Cable Range) ZZ - Entry Thread B A D Sample: CGSB-W-1-3-R-20S-M20 DESIGN STANDARD BS EN 50262: 1999 GLAND MARKING INGRESS PROTECTION Example: CGSB-W-1-3-R-20S-M20 Amphenol IP66 OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +200C MATERIALS Brass CZ121 (CGSB) 316 Stainless Steel (CGSS) Outer sheath seal material: Standard Neoprene, black. Option Silicone, white Reduced bore outer sheath seal (R) Silicone, red THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); Extended operating temperature -60C to +200C, halogen free versions: Brass (CGSB-*-3); 316 Stainless Steel (CGSS-*-3) CLAMPS PLATING SWA steel wire armor (CGSB-W) SWB woven steel wire armor or STA steel tape armor (CGSB-X) SWA, SWB and STA armor clamps (CGSB-Z) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC); PCP (EX-SPCP); Low Smoke Zero Halogen (EX-LSH) Gland and accessory kits: K7- includes gland, locknut, earthtag and PVC shroud K8 - includes brass gland, brass locknut, brass earthtag and zero halogen shroud 32 C Gland Size Entry Threads Metric Entry Max Max Thread Across Protrusion Length Corners Length [B] [A] Gland Seal Range Cable Inner Sheath [C] Min Max Armour Acceptance Range Cable Outer Sheath [D] Standard Min Max Shroud Size Reduced (R) Min Max NPT/BSP W XZ 16 M20 N1 or N2 10 26.5 54.0 - 11.7 9.0 13.5 6.7 10.3 0.90 0.15-0.35 L24 20s M20 N1 or N2 10 26.5 54.0 - 11.7 11.5 16.0 9.4 12.5 0.90-1.25 0.15-0.35 L24 20 M20 N1 or N2 10 33.0 54.0 - 14.0 15.5 21.0 12.0 17.6 0.90-1.25 0.15-0.50 L30 25 M25 N2 or N3 10 41.4 54.0 - 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 L38 32 M32 N3 or N4 10 50.6 60.0 - 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 L46 40 M40 N4 or N5 15 60.5 67.0 - 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 L55 50s M50 N5 or N6 15 71.5 67.0 - 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 L65 50 M50 N6 15 71.5 67.0 - 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.60 L65 63s M63 N6 or N7 15 88.0 69.0 - 50.1 52.1 59.4 47.5 54.8 2.50 0.30-0.80 L80 63 M63 N7 15 88.0 69.0 - 56.0 58.4 65.8 53.8 61.2 2.50 0.30-0.80 L80 75s M75 N7 or N8 15 99.0 77.0 - 62.0 64.8 72.2 60.2 68.0 2.50 0.30-1.00 L90 75 M75 N8 15 99.0 77.0 - 68.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 L90 80 M80 x 2 N8 or N9 20 115.2 104.0 - 72.0 77.0 84.0 - - 3.15 0.45-1.00 L104 80H M80 x 2 N8 or N9 20 115.2 104.0 - 72.0 79.6 90.0 - - 3.15 0.45-1.00 L104 85 M85 x 2 N8 or N9 20 115.2 104.0 - 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 L104 90 M90 x 2 N9 or N10 20 125.7 104.0 - 84.0 88.0 96.0 - - 3.15 0.45-1.00 L114 90H M90 x 2 N9 or N10 20 125.7 104.0 - 84.0 92.0 102.0 - - 3.15 0.45-1.00 L114 100 M100 x 2 N9 or N10 20 125.7 104.0 - 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * "W" refers to the wire diameter in a steel wire armored cable. * "XZ" refers to the wire diameter in a woven steel wire armored cable or the tape thickness in a steel tape armored cable. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * Full assembly instructions are available upon request, the instructions should be read prior to installation and adhered to in full. 33 Non Hazardous Industrial Glands CGDS CDGS type glands provide a seal on the inner sheath, a seal on the outer sheath and an armor specific armor clamp for armored cable. The armor clamp provides an electrical bond between the cable armor and the gland. CGDS type glands maintain IP66, IP67. EXAMPLE PART NUMBER CGDS* [W] [Y] [R] [YY] [ZZ] * - Armor Type (W = SWA / X = SWB / Z = STA) W - Gland Material (B = Brass / S = Stainless Steel) X - Seal Type ( 0 = None / 1 = Neoprene / 3 = Silicone) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) R - Reduced bore option YY - Gland Size (Cable Range) ZZ - Entry Thread B A D C Sample: CGDS-W-B-0-3-R-20S-M20-K1 DESIGN STANDARD BS EN 50262: 1999 GLAND MARKING INGRESS PROTECTION Example: CDGS-W-B-0-3-R-20S-M20 Amphenol IP66 and IP67 OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +200C MATERIALS Brass CZ121 (CGDS-*-B) 316 Stainless Steel (CGDS-*-S) Inner and outer sheath seal material: Standard Neoprene, black. Option Silicone, white Reduced bore outer sheath seal (R) Silicone, red VARIATIONS Omission of outer seal: Brass (CDGS-*-B-0); 316 Stainless Steel (CDGS-*-S-0) THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Extended operating temperature -60C to +200C, halogen free versions: Brass (CDGS-*-B-3); 316 Stainless Steel (CDGS-*-S-3) CLAMPS PLATING SWA steel wire armor (CGDS-W) SWB woven steel wire armor (CGDS-X) STA steel tape armor (CGDS-Z) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) 34 ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC); PCP (EX-PCP); Low Smoke Zero Halogen (EX-LSH) Gland and accessory kits: K1 - includes gland, locknut, earthtag and PVC shroud K8 - includes brass gland, brass locknut, brass earthtag and zero halogen shroud Gland Size Entry Threads Metric Entry Max Max Thread Across Protrusion Length Corners Length [B] [A] Gland Seal Range Cable Inner Sheath [C] Min Max Armour Acceptance Range Cable Outer Sheath [D] Standard Min Max Shroud Size Reduced (R) Min Max NPT/BSP W XZ 16 M20 N1 or N2 16 26.5 58.0 4.0 8.4 8.4 13.5 4.9 10.0 0.90 0.15-0.35 L24 20s M20 N1 or N2 16 26.5 58.0 8.0 11.7 11.5 16.0 9.4 12.5 0.90-1.25 0.15-0.35 L24 20 M20 N1 or N2 16 33.0 58.0 6.7 * 14.0 15.5 21.0 12.0 17.6 0.90-1.25 0.15-0.50 L30 25 M25 N2 or N3 16 41.4 58.0 13.0 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.50 L38 32 M32 N3 or N4 16 50.6 65.0 19.0 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.15-0.55 L46 40 M40 N4 or N5 16 60.5 72.0 25.0 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 L55 50s M50 N5 or N6 16 71.5 73.0 31.5 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.20-0.60 L65 50 M50 N6 16 71.5 73.0 36.5 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 L65 63s M63 N6 or N7 19 88.0 76.0 42.5 50.1 52.1 59.4 47.5 54.8 2.50 0.30-0.80 L80 63 M63 N7 19 88.0 76.0 49.5 56.0 58.4 65.8 53.8 61.2 2.50 0.30-0.80 L80 75s M75 N7 or N8 19 99.0 82.0 54.5 62.0 64.8 72.2 60.2 68.0 2.50 0.30-1.00 L90 75 M75 N8 19 99.0 82.0 60.5 68.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 L90 80 M80 x 2 N8 or N9 25 115.2 110.0 62.2 72.0 77.0 84.0 - - 3.15 0.45-1.00 L104 80H M80 x 2 N8 or N9 25 115.2 110.0 62.2 72.0 79.6 90.0 - - 3.15 0.45-1.00 L104 85 M85 x 2 N8 or N9 25 115.2 110.0 69.0 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 L104 90 M90 x 2 N9 or N10 25 125.7 110.0 74.0 84.0 88.0 96.0 - - 3.15 0.45-1.00 L114 90H M90 x 2 N9 or N10 25 125.7 110.0 74.0 84.0 92.0 102.0 - - 3.15 0.45-1.00 L114 100 M100 x 2 N9 or N10 25 125.7 110.0 82.0 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 L114 All Dimensions are in Millimeters NOTES: * CGDS gland size 20, the silicone inner seal only seals to a minimum of 11.0mm and NOT 6.7mm. * NPT entry thread reference on page 53. * Gland Size does not necessarily equate to the entry thread size. * "W" refers to the wire diameter in a steel wire armored cable. * "XZ" refers to the wire diameter in a woven steel wire armored cable or the tape thickness in a steel tape armored cable. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * Full assembly instructions are available upon requests, the instructions should be read prior to installation and adhered to in full. 35 Non Hazardous Industrial Glands CGU CGU type glands provide a single pull resistant seal on the outer sheath of unarmoured cable. CGU type glands maintain IP66, IP68 to 25 meters. EXAMPLE PART NUMBER CGU W X Y YY ZZ [W] - B [Y] [YY] [ZZ] Gland Material (B = Brass / S = Stainless Steel) Seal (1 = Neoprene / 3 = Silicone) Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) Gland Size (Cable Range) Entry Thread A D Sample: CGU-B-1-3-20S-M20 DESIGN STANDARD BS EN 50262: 1999 GLAND MARKING INGRESS PROTECTION Example: CGU-B-1-3-20S-M20 IP66 and IP68 @ 25 metres OPERATING TEMPERATURES Standard Seals -20C to +80C Silicone Seals - 60C to +200C MATERIALS Brass CZ121 (CGU-B) 316 Stainless Steel (CGU-S) Outer sheath seal material: Standard Neoprene, black. Option Silicone, white THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); Extended operating temperature -60C to +200C, halogen free versions: Brass (CGU-B-3); 316 Stainless Steel (CGU-B-3); PLATING Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) ACCESSORIES Locknut - Brass (EX-BLN); 316 Stainless Steel (EX-SLN) Earth Tag - Brass (EX-BET), 316 Stainless Steel (EX-SET) IP Washer - Nylon (EX-NSW); Red Fibre (EX-FSW) Serrated Lock Washer - 316 Stainless Steel (EX-SSW), Galvanised Steel (EX-GSW) Shroud - PVC (EX-PVC); PCP (EX-PCP); Low Smoke Zero Halogen (EX-LSH) Gland and accessory kits: K9 - includes gland, locknut and PVC shroud 36 Gland Size Entry Threads Entry Thread Length Max Across Corners [B] [A] Max Protrusion Length Gland Seal Range Cable Outer/Lead Sheath [D[ Shroud Size Min Max 33.0 4.0 8.4 28.0 33.0 7.2 11.7 L24 33.0 33.0 9.6 14.0 L30 16 41.4 33.0 13.5 20.0 L38 16 50.6 33.0 19.5 26.3 L46 Metric NPT/BSP 16 M20 N1 or N2 16 28.0 20s M20 N1 or N2 16 20 M20 N1 or N2 16 25 M25 N2 or N3 32 M32 N3 or N4 L24 40 M40 N4 or N5 16 60.5 37.0 23.0 32.2 L55 50s M50 N5 or N6 16 71.5 37.0 28.2 38.2 L65 50 M50 N6 16 71.5 37.0 33.2 44.1 L65 63s M63 N6 or N7 19 88.0 37.0 39.3 50.1 L80 63 M63 N7 19 88.0 37.0 46.7 56.0 L80 75s M75 N7 or N8 19 99.0 37.0 52.3 62.0 L90 75 M75 N8 19 99.0 37.0 58.1 68.0 L90 80 M80 x 2 N8 or N9 25 115.2 50.0 62.3 72.0 L104 85 M85 x 2 N8 or N9 25 115.2 50.0 69.1 78.0 L104 90 M90 x 2 N9 or N10 25 125.7 50.0 74.1 84.0 L114 100 M100 x 2 N9 or N10 25 125.7 50.0 82.1 90.0 L114 All Dimensions are in Millimeters NOTES: * NPT entry thread reference details on page 53. * Gland Size does not necessarily equate to the entry thread size. * Please note that dimensions (A) and (B) may differ for glands with non-Metric entry threads. Please refer to our thread data tables for specific dimensions. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. * Full assembly instructions are avalable upon request, the instructions should be read prior to installation and adhered to in full. 37 Accessories: Adaptors and Reducers EXR EXR Series Dual Certified Adaptors and Reducers provide a method of matching electrical thread forms on Ex equipment while maintaining Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66, 68 for IEC type applications. Class I, Division 1 and NEMA 4X, 6P for NEC/CEC type applications. EXAMPLE PART NUMBER EXR [W] [Y] [ZZ1] [ZZ2]Sample: EXR-B-0-M20-M20 W Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) ZZ1 Male Thread ZZ2 Female Entry Thread CERTIFICATION CENELEC SIRA 00ATEX 1094 (Metric Female) SIRA 99ATEX 1115U (Non-Metric Female) I M2 II 2DG E Ex de IandIIC CSA / A Ex Class I, Zone 1, Ex de IandIIC Class I, Division 1and2 ABCD Class II EFG, Class III GOST R-Exde IICU POCC GB 05.B00482 INGRESS PROTECTION IMPACT RESISTANCE IP66 68, CSA Enclosure Type (NEMA) 4X 6P 20Nm OPERATING TEMPERATURES -50C to +85C MATERIALS Brass CZ121 (EXR-B) 316 Stainless Steel (EXR-S) THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); The standard 'O' Ring material is Nitrile. Tapered male thread options are not normally supplied c/w `O' ring seal, thread sealant should be used to maintain the desired level of ingress protection PLATING Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) 38 SIZES AVAILABLE AND DIMENSION REFERENCES Metric Bore NPT Bore ISO Pipe Bore Et Bore M16 10.0 M20 M25 14.0 N1 15.0 1/2" 15.0 3/4" 14.0 18.0 N2 19.0 3/4" 19.0 1" 18.0 M32 24.0 N3 25.0 1" 25.0 N4 24.0 M40 32.0 N4 32.0 N4 32.0 11/2" 32.0 M50 41.0 N5 38.0 11/2" 38.0 2" 41.0 M63 53.0 N6 49.0 2" 49.0 N7 53.0 M75 64.0 N7 60.0 N7 60.0 3" 64.0 M80 x 2.0 69.0 N8 75.0 3" 75.0 M85 x 2.0 73.0 N9 88.0 31/2" 88.0 M90 x 2.0 78.0 N10 100.0 4" 100.0 M100 x 2.0 88.0 All Dimensions are in Millimeters NOTES: * Full installation instructions are supplied with adaptors and reducers, the instructions must be read prior to installation and adhered to in full * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * For Flameproof Exd applications the female thread into which the adaptor or reducer is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads * For NEC/CEC Explosion Proof applications an engagement of at least 8 full threads must be achieved for parallel threads and 5 full threads must be achieved for tapered threads * Where EXR adaptors and reducers are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system * 316 Stainless Steel versions do not feature a marking band. This reduces the overall length of reducers by 5mm, it does not affect the overall length of Adaptor * Adaptors are used where the thread size of the cable gland or connection device is larger than, or of an equivalent size to the entry thread of the enclosure * Reducers are used to reduce the entry thread of an enclosure to accept a cable gland or connection device with a smaller thread 39 Accessories: Nylon Adaptors and Reducers EXRN EXRN Series Certified Adaptors and Reducers provide a method of matching electrical threadforms on Ex equipment while maintaining Increased Safety Exe methods of explosion protection and IP66, 68 for IEC type applications. Adaptors are used where the thread size of the cable gland or connection device is larger than, or of equivalent size to the entry thread of the enclosure. Reducers are used to reduce the entry thread of an enclosure to acept a cable gland or connection device with a smaller thread. EXAMPLE PART NUMBER EXRN [ZZ1] [ZZ2] ZZ1 Male Thread ZZ2 Female Entry Thread Sample: EXRN-M20-M25 CERTIFICATION CENELEC SIRA 00ATEX 3091 (Metric Female) SIRA 99ATEX 3116U (Non-Metric Female) II 2DG E Ex e II CSA / A Ex Class I, Zone 1, Ex e II Class I, Division 2 ABCD Class II EFG, Class III INGRESS PROTECTION OPERATING TEMPERATURES IP66 68, CSA Enclosure Type (NEMA) 4X 6P -50C to +85C IMPACT RESISTANCE 7Nm MATERIALS 30% Glass Filled Nylon (EXRN) THREADS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) SEALS The standard 'O' Ring material is Nitrile 40 SIZES AVAILABLE AND DIMENSION REFERENCES Metric Bore NPT Bore ISO Pipe Bore ET Bore M16 9.3 M20 M25 11.0 N1 12.0 I1 12.0 E2 11.0 16.0 N2 13.0 I2 13.0 E3 16.0 M32 21.0 N3 18.0 I3 18.0 E4 21.0 M40 31.0 N4 33.0 I4 33.0 E5 31.0 M50 40.0 N5 38.0 I5 38.0 E6 40.0 All Dimensions are in Millimeters NOTES: * Full installation instructions are supplied with adaptors and reducers, the instructions must be read prior to installation and adhered to in full * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * Adaptors are used where the thread size of the cable gland or connection device is larger than, or of an equivalent size to the entry thread of the enclosure * Reducers are used to reduce the entry thread of an enclosure to accept a cable gland or connection device with a smaller thread 41 Accessories: Insulating Adaptors EXIA Insulating Adaptors EXIA series Insulated Adaptors provide a method of insulating the cable gland or connection device from the equipment into which it has been installed. EXIA series Insulated Adaptors maintain Flameproof Exd method of explosion protection and IP66, 68 for IEC type applications. Class I, Division 1 and NEMA 4X, 6P for NEC/CEC type applications. EXAMPLE PART NUMBER EXIA [W] [X] [ZZ1] [ZZ2] W - Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) ZZ1 - Male Thread ZZ2 - Female Entry Thread (See NPT reference data on page 53) Sample:EXIA-B-1-M20-N1 CERTIFICATION CENELEC SIRA 00ATEX 1098 (Metric Female) SIRA 99ATEX 1117U (Non-Metric Female) II 2DG E Ex d IIC CSA / A Ex Class I, Zone 1, Ex d IIC Class I, Division 2 ABCD Class II EFG, Class III GOST R-Exde IICY POCC GB 05.B00482 APPLICATION To avoid relying on the contact between cable termination and equipment enclosure for grounding the cable armor, an insulated adaptor can be fitted to both ends of the cable with a grounding device (i.e. earth tag/lug) fitted between the adaptor and the termination. The armor current can then be taken from the grounding device to ground in a controlled, positive manner that can be inspected easily. Single Point Grounding - In many application it is sufficient to ground the cable armor at one end. For single point grounding the insulated adaptors would again be used at both ends of the cable but with the earth tag fitted only to the end where grounding is required. Single Point Grounding can - reduce the circulating currents that can cause heating of high capacity cables. - reduce the risk of damage to electronic equipment within the enclosure in the even of a short circuit to ground through the enclosure. - reduce the problems of electrical noise on the armor affecting the clean earth required for some sensitive instruments. Electrical properties of insulating material - Dielectric strength: 90KV/mm - Volume resistivity: 8.6 x 10x14 O/cm - Minimum thickness of insulator: 5mm +/- 1mm - 2KV 'Wet Withstand' Tested INGRESS PROTECTION OPERATING TEMPERATURES IP54, CSA Enclosure Type (NEMA) 3 IP66 68 can be maintained with the use of either IP washers or a non-hardening thread sealant -50C to +85C 42 MATERIALS IMPACT RESISTANCE Brass CZ121 (EXIA-B) 316 Stainless Steel (EXIA-S) 7Nm THREADS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) SIZES AVAILABLE AND DIMENSION REFERENCES Metric Hex A/F Hex A/C Total Length Male Length Female Depth Bore M20 30.5 35.5 54.0 16.0 17.0 13.5 M25 37.6 43.2 54.0 16.0 17.0 19.0 M32 47.2 54.3 54.0 16.0 17.0 25.0 M40 55.9 64.1 54.0 16.0 17.0 30.0 M50 70.1 80.8 54.0 16.0 17.0 40.5 M63 80.0 92.0 54.0 16.0 17.0 53.0 M75 95.3 109.5 54.0 16.0 17.0 65.0 M80 x 2.0 100.0 114.0 63.0 20.0 22.0 70.0 M85 x 2.0 106.4 114.0 63.0 20.0 22.0 75.0 M90 x 2.0 106.4 114.0 63.0 20.0 22.0 80.0 All Dimensions are in Millimeters NOTES: * Full installation instructions are supplied with insulated adaptors, the instructions must be read prior to installation and adhered to in full * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * For Flameproof Exd applications the female thread into which the adaptor is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads 43 Accessories: Stopping Plugs EXSPH Stopping Plugs EXSPH Series Dual Certified Metallic Dome Head Stopping Plugs provide a method of filling unused entries in Ex equipment while maintaining Flameproof Exd and Increased Safety Exe methods of explosion protection and IP66, 68 for IEC type applications. Class I, Division 1 and NEMA 4X, 6P for NEC/CEC type applications. EXAMPLE PART NUMBER EXSPH [W] [Y] [ZZ] W - Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) ZZ - Male Entry Thread Sample: EXSPH-B-1-M20 CERTIFICATION CENELEC SIRA 00ATEX1094 I M2 II 2DG E Ex de IandIIC CSA / A Ex Class I, Zone 1, Ex de IandIIC Class I, Division 1and2 ABCD Class II EFG, Class III GOST R-Exde IICY POCC GB 05.B00482 INGRESS PROTCTION IMPACT RESISTANCE IP66 68, CSA Enclosure Type (NEMA) 4X 6P 20Nm OPERATING TEMPERATURES -50C to +85C THREADS MATERIALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Brass CZ121 (SPMH-B) 316 Stainless Steel (SPMH-S) SEALS PLATING The standard 'O' Ring material is Nitrile Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) 44 SIZES AVAILABLE AND DIMENSION REFERENCES Metric Dim Ref NPT Dim Ref ISO Pipe Dim Ref M16 A M20 M25 B N1 C P1 C B N2 C P2 C M32 B N3 E P3 C M40 B N4 E P4 C M50 B N5 E P5 C M63 B N6 E P6 C M75 B N7 F P7 C M80 x 2.0 D N8 F P8 C M85 x 2.0 D N9 F M90 x 2.0 D N10 F M100 x 2.0 D DIMENSIONS Dimension Reference A Head Diameter B C D E F Minimum 6.0mm larger than the major thread diameter Hex Socket A/F 8.0 10.0 10.0 10.0 10.0 10.0 Total Length 21.5 21.5 24.5 25.5 29.0 39.0 Thread Length 16.0 16.0 19.0 22.0 23.5 33.5 All Dimensions are in Millimeters NOTES: * EXSPH type stopping plugs are designed for use within either clearance holes or parallel threaded entries, for taper threaded entries we would recommend the use of EXSP type stopping plugs on page 48. * Full installation instructions are supplied with stopping plugs, the instructions must be read prior to installation and adhered to in full * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * For Flameproof Exd applications the female thread into which the stopping plug is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads * For NEC/CEC Explosion Proof applications an engagement of at least 8 full threads must be achieved for parallel threads and 5 full threads must be achieved for tapered threads * Where metallic stopping plugs are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system 45 Accessories: Stopping Plugs EXSPHN Stopping Plug EXSPHN Series Glass Filled Nylon Dome Head Stopping Plugs provide a method of filling unused entries in increased safety equipment, maintaining Increased Safety Exe methods of explosion protection and IP66, 68 for IEC type applications. EXAMPLE PART NUMBER EXSPHN [ZZ] ZZ Male Thread size Sample: EXSPHN-M20 CERTIFICATION CENELEC SIRA 00ATEX3091 II 2DG E Ex eII CSA / A Ex Class I, Zone 1, Ex e II Class I, Division 2 ABCD Class II EFG, Class III INGRESS PROTECTION IMPACT RESISTANCE IP66 68, CSA Enclosure Type (NEMA) 4X 6P 7Nm OPERATING TEMPERATURES -50C to +85C MATERIALS 30% Glass Filled Nylon (SPMHN) THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG The standard 'O' Ring material is Nitrile 46 SIZES AVAILABLE AND DIMENSION REFERENCES Metric Dim Ref NPT Dim Ref M16 B M20 M25 C N1 D C N2 D M32 C N3 F M40 C N4 F M50 C N5 F M63 C N6 F M75 C N7 G B C DIMENSIONS Dimension Reference A Head Diameter Minimum 6.0mm larger than the major thread diameter Hex Socket A/F 6.0 8.0 10.0 Total Length 21.5 21.5 21.5 Thread Length 16.0 16.0 16.0 All Dimensions are in Millimeters NOTES: * EXSPHN type stopping plugs are designed for use within either clearance holes or parallel threaded entries, for taper threaded entries we would recommend the use of EXSP type stopping plugs on page 48. * Full installation instructions are supplied with adaptors and reducers, the instructions must be read prior to installation and adhered to in full. * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch. 47 Accessories: Stopping Plugs EXSP T ype Stopping Plug Type EXSP Series Certified Metallic Stopping Plugs provide a method of filling unused entries in Ex equipment, maintaining Flameproof Exd method of explosion protection and IP54 for IEC type applications. Class I, Division 1 and NEMA 3 for NEC/CEC type applications. EXSP-A Type - Externally accessible hexagon recess EXSP-B Type - Internally accessible hexagon recess EXAMPLE PART NUMBER EXSP [T] [W] [Y] [ZZ] T - Type (A = Type A / B = Type B) W - Material (B = Brass / S = Stainless Steel) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) ZZ - Male Thread Size Sample: EXSP-A-B-1-M20 CERTIFICATION CENELEC SIRA 99ATEX1113 II 2DG E Ex d IIC CSA / A Ex Class I, Zone 1, Ex d IIC Class I, Division 1and2 ABCD Class II EFG, Class III INGRESS PROTECTION IMPACT RESISTANCE IP54, CSA Enclosure Type (NEMA) 3 7Nm OPERATING TEMPERATURES -50C to +85C MATERIALS Brass CZ121 (EXSP-T-B) 316 Stainless Steel (EXSP-T-S) THREADS PLATING ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel) Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) 48 SIZES AVAILABLE AND DIMENSION REFERENCES Metric Dim Ref NPT Dim Ref ISO Pipe Dim Ref M16 A M20 B N1 C P1 E M25 B N2 C P2 E M32 B N3 D P3 G M40 B N4 D P4 G M50 B N5 D P5 G M63 B N6 D P6 G M75 B N7 F P7 G M80 x 2.0 F N8 F P8 G M85 x 2.0 F N9 F M90 x 2.0 F N10 F M100 x 2.0 F DIMENSIONS Dimension Reference A B C D E F G Hex Socket A/F 8.0 10.0 10.0 10.0 10.0 10.0 10.0 Length (min) 17.0 17.0 14.0 16.0 18.0 22.0 25.0 All Dimensions are in Millimeters NOTES: * Full installation instructions are supplied with stopping plugs, the instructions must be read prior to installation and adhered to in full * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * For Flameproof Exd applications the female thread into which the stopping plug is to be fitted must comply with clause 5.3 of EN 50018:2000 (clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads * For NEC/CEC Explosion Proof applications an engagement of at least 8 full threads must be achieved for parallel threads and 5 full threads must be achieved for tapered threads 49 Accessories: Breather Drain EXBD EXBD Series Breather Drain provides a method of effectively draining any moisture within an enclosure whilst allowing the air inside the enclosure to breathe with the surrounding atmosphere. EXBD series breather drains maintain Increased Safety Exe method of explosion protection and IP66 for IEC type applications. EXAMPLE PART NUMBER EXBD [W] [Y] [ZZ] W - Material (B = Brass / S = Stainless Steel / N = 30% Glass Filled Nylon) Y - Plating (0 = No Plating / 1 = Nickel / 2 = Tin / 3 = Zinc / 4 = Electroless Nickel) YY - Male Thread ZZ - 10 or 15 Sample: EXBD-B-0-M20-15 Moisture Castellated Locknut Internal Dust Seal CERTIFICATION CENELEC SIRA99ATEX3050U I M2 II 2DG EExe I/II; II 2DG E Exe (Glass Filled Nylon) Captive 'O' Ring Seal Moisture Out Air In CSA / A Ex Class I, Zone 1, Exe II; Class I Division 2, Groups ABCD External Drainage GOST R-Exde IICY POCC GB 05.B00482 APPLICATION Internal Dust Seal provides ingress protection to IP66 and 4x, with the largest possible pore size to aid draining, whilst retaining filtration capabilities that remove debris from the moisture and retains it on the surface where it can easily be removed with compressed air. Additionally the structural strength and chemical resistance characteristics of the material enable the filter to meet the requirements of hazardous area installations Castellated Locknut allows moisture to pass between the locknut and the enclosure, draining via holes in the thread without any build up of moisture in the bottom of the enclosure Captive 'O' Ring Seal is located within a recess on the face of the breather drain again optimising ingress protection, ensuring the 'o'ring is not displaced during installation and helping protect the 'O' ring from the environmental damage External Drainage via two ports optimises ingress protection without compromising the draining capabilities INGRESS PROTECTION IMPACT RESISTANCE IP66, CSA Enclosure Type 4x, NEMA 4x 20Nm. (7Nm GF Nylon) OPERATING TEMPERATURES -50C to +85C MATERIALS Brass CZ121 (EXBD-B) 316 Stainless Steel (EXBD-S) 30% Glass Filled Nylon (EXBD-N) VARIATIONS Clearance Hole: 10mm length of thread, supplied complete with a castellated locknut and having 2 holes in the thread wall positioned directly opposite each other (EXBD-W-Y-YY-10) Threaded Entry: 15mm length of thread, either supplied with castellated locknut (EXBD-W-Y-YY-15) or without castellated locknut (EXBD-W-YYY-15NL) and having 3 holes in the thread wall, offset to provide a 9mm range to accommodate differing wall thickness. 50 THREADS SEALS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG PLATING The standard 'O' Ring material is Nitrile Nickel (1); Tin (2); Zinc (3); Electroless Nickel (4) DIMENSIONAL DATA Size Hex A/F Hex A/C M20 - N1 28.6mm 32.9mm M25 - N2 34.9mm 40.2mm Thread Length Head Length 10 (2 Hole) or 15 (3 Hole) 15mm All Dimensions are in Millimeters NOTES: * 30% glass filled nylon variations are only available with 15mm length of thread version and are supplied with or without a brass castellated nut * Full installation instructions are supplied with the breather drain, the instructions must be read prior to installation and adhered to in full * Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch * Where metallic breather drains are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system 51 Accessories: General A full range of accessories including locknuts, earthtags, sealing washers, serrated washers and shrouds for use with all our cable glands AVAILABILITY ACCESSORY TYPE GLAND TYPES/SIZE THREAD TYPES METRIC NPT BSP FRENCH Locknuts provide a method of securing a threaded entry component into a piece of equipment Brass (EX-BLN) 316 Stainless Steel (EX-SLN) All M16 to M100 1/2" to 4" 1/2" to 4" F48 316 Stainless Steel M16 to M100 1/2" to 4" 1/2" to 4" F48 Nylon (EX-NLN) Nylon M20 to M63 - - - Steel (EX-MLN) Industrial M20 to M50 - - - 1/2" to 4" 1/2" to 4" F48 Earth Tags provide an earth bond connection for an entry component Brass (EX-BET) All M16 to M100 IP Sealing Washers are fitted between an entry component and the equipment to maintain the IP rating of the equipment Nylon (EX-NSW) All M16 to M100 1/2" to 4" 1/2" to 4" F48 Red Fibre (EX-SFW) All M20 to M75 - - - Serrated Star Washers can be used in conjunction with a locknut to provide additional fixing security and improve bonding 316 Stainless Steel (EX-SSW) All M16 to M100 1/2" to 4" 1/2" to 4" F48 Galvanised Steel (EX-GSW) All M20 to M75 - - - Shrouds can be used to protect the gland from the surrounding environment PVC (EX-PVC) 16 to 100 PCP (EX-PCP) 16 to 85 LSOH (EX-LSH) 16 to 85 Shrouds are not available for all glands, please see specific gland page for exact details NOTES: * As standard ISO Metric threads are supplied with a 1.5mm pitch up to and including M75 and a 2.0mm pitch for sizes above M75 52 Entry Thread Reference Tables Thread Types ISO METRIC IEC 60423 1993 NPT ANSI B1.20.1 1983 NPS ANSI B1.20.1 1983 Thread Ref Size Major O TPI Pitch Thread Length Min Hex A/C M16 16 x 1.5 15.97 16.93 1.50 16.0 26.5 M20 20 x 1.5 19.97 16.93 1.50 16.0 33.0 M25 25 x 1.5 24.97 16.93 1.50 16.0 41.4 M32 32 x 1.5 31.97 16.93 1.50 16.0 50.6 M40 40 x 1.5 39.97 16.93 1.50 16.0 60.4 M50 50 x 1.5 49.97 16.93 1.50 16.0 71.5 M63 63 x 1.5 62.97 16.93 1.50 19.0 88.0 M75 75 x 1.5 74.97 16.93 1.50 19.0 99.0 M80 80 x 2.0 19.97 12.70 2.00 25.0 115.2 M85 85 x 2.0 84.97 12.70 2.00 25.0 115.2 M90 90 x 2.0 89.97 12.70 2.00 25.0 125.7 M100 100 x 2.0 99.97 12.70 2.00 25.0 125.7 N1 1/2" 21.22 14.00 1.81 19.9 26.5 N2 3/4" 26.57 14.00 1.81 20.1 33.0 N3 1" 33.23 11.50 2.20 21.5 41.4 N4 11/4" 41.99 11.50 2.20 25.6 50.6 N5 11/2" 48.05 11.50 2.20 26.0 60.5 N6 2" 60.09 11.50 2.20 26.9 71.5 N7 21/2" 72.70 8.00 3.18 39.9 88.0 N8 3" 88.61 8.00 3.18 41.5 99.0 N9 31/2" 101.36 8.00 3.18 42.8 115.2 N10 4" 113.97 8.00 3.18 44.0 125.7 S1 1/2" 20.90 14.00 1.81 19.9 26.5 S2 3/4" 26.26 14.00 1.81 20.1 33.0 S3 1" 32.84 11.50 2.20 21.5 41.4 S4 11/4" 41.61 11.50 2.20 25.6 50.6 S5 11/2" 47.67 11.50 2.20 26.0 60.5 S6 2" 59.72 11.50 2.20 26.9 71.5 S7 21/2" 72.16 8.00 3.18 39.9 88.0 S8 3" 88.06 8.00 3.18 41.5 99.0 S9 31/2" 100.78 8.00 3.18 42.8 115.2 S10 4" 113.43 8.00 3.18 44.0 125.7 F48 PG48 (FR) 59.61 11.00 2.31 26.9 71.5 P1 1/2" 20.96 14.0 1.81 19.9 26.5 P2 3/4" 26.44 14.0 1.81 20.1 33.0 P3 1" 33.25 11.0 2.31 25.0 41.4 BS2779 P4 11/4" 41.91 11.0 2.31 25.6 50.6 (BSPP, G, R, PF) P5 11/2" 47.80 11.0 2.31 26.0 60.5 P6 2" 5961 11.0 2.31 26.9 71.5 P7 21/2" 75.18 11.0 2.31 39.9 88.0 T1 1/2" 20.96 14.0 1.81 19.9 26.5 T2 3/4" 26.44 14.0 1.81 20.1 33.0 T3 1" 33.25 11.0 2.31 25.0 41.4 T4 11/4" 41.91 11.0 2.31 25.6 50.6 T5 11/2" 47.80 11.0 2.31 26.0 60.5 T6 2" 5961 11.0 2.31 26.9 71.5 T7 21/2" 75.18 11.0 2.31 39.9 88.0 ISO Pipe Parallel ISO R/7; ISO Pipe Taper to ISO R/7; BS21 (BSPT, GK) 53 Ingress Protection It is essential when selecting cable glands and/or accessories to ensure that the products will maintain the IP rating of the equipment and the integrity of the installation. IP Codes are based on the IEC Standard 529, degrees of protection provided by enclosures. In most cases Peppers cable glands will maintain Ingress Protection of the equipment into which they are installed to: IP 66 * Dust Tight. No ingress of dust possible. * Protected against heavy seas or powerful jets of water IP67 * Dust Tight. No ingress of dust possible * Protected against harmful ingress of water when immersed between a depth of 150mm to 1m IP68 * Dust Tight. No ingress of dust possible. * Protected against submersion. Suitable for continuous immersion in water at stated depth. * Depth stated for Amphenol cable glands is 25m DTS 01 (Deluge) * This test was originally constructed by shell and Esso in the UK to simulate the routine deluging of electrical equipment on offshore installations. IP 54- Minimum requirement for Hazardous Location products * Dust protected. Prevents ingress of dust sufficient to cause harm. * Protected from splashing water from any direction As a general guide to selecting the sealing method that is most likely to maintain the required IP rating for different entry types, we recommend: * Clearance Holes - Integral `O' ring seal or nylon IP washer * Parallel Threaded Entries - Integral `O' ring seal, IP washer or non-hardening thread sealant * Taper Threaded Entries - Non-hardening thread sealant Gland Weight Data Gland Size Entry Thread Cable Gland Type EX-20 EX-25 EE-30 EX-35 EX-40 EE-RG EX-60 EX-65 EX-70 EX-75 16 M20 164 144 134 84 142 6 165 - - - - 20s M20 160 130 124 90 144 - 165 115 180 - 52 20 M20 250 186 180 94 158 8 240 170 260 215 84 25 M25 400 262 262 152 256 16 400 260 385 340 140 32 M32 750 420 402 176 298 28 725 384 570 485 180 40 M40 1095 672 680 332 556 35 1060 585 885 730 436 CGA 50s M50 1415 980 1040 570 980 - 1435 - 1035 - - 50 M50 1295 758 764 458 796 65 1340 700 1160 875 480 63s M63 2345 1410 1410 850 1410 - 2100 - 1555 - - 63 M63 2005 1140 1185 684 1170 74 2025 1040 1695 1355 910 75s M75 1980 1745 1730 954 1565 - 2330 - 1750 - - 75 M75 2200 1375 1495 764 1310 - 2240 1150 1880 1475 1070 80 M80 3970 3255 3130 1430 2130 - 4985 2730 3860 3415 1770 85 M85 3300 2655 2500 1290 1980 - 4065 2255 3250 2830 - 90 M90 4314 3559 3280 1510 2360 - 5215 2790 3985 3985 - 100 M100 3537 2795 3054 1485 2285 - 4410 2450 3580 3580 - All weights are approximate and shown in grams NOTES: * Weights shown are for Brass versions (except Nylon EE-RG) * To estimate weights for 316 Stainless Steel versions apply a factor of 0.92 * Weights for glands with non-metric entry threads will vary * Approximate weights for EX-45, EX-50, EX-55 are available on application * Approximate weights for CGDS, CGSS and CGU industrial glands are the same as for EX versions 54 Amphenol(R)/Pyle(R) Industrial Cord Grips Amphenol(R)/Pyle(R) Industrial Cord Grips make sure your cord or cable stays in and everything else stays out. This product is designed for liquid-tight strain relief of cord, cable, and flexible conduit. Available in straight, 45, and 90 styles, Amphenol(R)/Pyle(R) cord grips are UL listed, and CSA certified. This section will provide information on a large family of cable pass-thru and strain relief devices for use with industrial connectors by showing complete assemblies as well as component parts. Contact your Amphenol(R)/Pyle(R) distributor for assistance. Features & Benefits UL Listed and CSA certified. Used for sealing where moving parts or handling can abuse connections. Tapered rubber grommet and seat. Secure cord the entire length of grommet making a liquid-tight seal. Variety of styles: straight, 45, 90, and flexible. Assures ease of installation and permits custom cable routing Various strain relief options: Standard compression nut, mechanical clamp nut or basket weave styles. Tapered conduit threads. Provide strong water and oil-tight joint. Machined components. Strong, lightweight, and have long service life. Male and female threads. Provides versatility in panelboard or threaded hub applications Applications FOR POWER CONTROL: * Switchboards * Machine Tools * Heating and Cooling * Lighting and Ballasts * Portable Equipment * Motors and Generators * Production Machinery * Processing Equipment * Robotics and Welding * Standby Power * Medical/Dental Equipment FOR COMMUNICATION: * Radio and Radar * Television * Transformers * Data Processing * Instruments FOR TRANSPORATION * Shipyards * Refrigerated Containers * Railroad and Trucking Materials and Finishes Straight Bodies 45 & 90 Bodies Grommets Washers Compression Nuts Mechanical Nuts Copper-free aluminum bar stock Cadmium plated ferrous alloy Oil-resistant synthetic rubber Cadmium plated cold rolled steel Copper-free aluminum bar stock Cast Aluminum 55 Amphenol Cord Grips CORD GRIP SPECIFICATIONS Cord Grip Specifications Allowable Ampacities of Insulated Conductors Fraction Conversion Table Fraction as taken from 1987 Edition of National Electric Code. Rated 0-2000 Volts, 60 to 90 Not More Than Three Conductors in Raceway or Cable or Earth (Directly Buried), Based on Ambient Temperature of 30C(86F) Temperature Rating of Conductors (Copper) Size 60C (140F) 75C (176F) 85C (185F) 90C (194F) TW, UF FEPW, RH, RHW, THW, THWN,XHHW, USE, ZW V TA, TBS, SA, AVB, SIS, FEP, FEPB, RHH, THHN XHHW* ... ... 20 25 30 40 55 70 85 95 110 125 ... ... 20 25 35 50 65 85 100 115 130 150 ... 18 25 30 40 55 70 95 110 125 145 165 14 18 25 30 40 55 75 95 110 130 150 170 AWG MCM 18 16 14 12 10 8 6 4 3 2 1 0 Ampacity Correction Factors For ambient temperatures other than 30C, multiply the ampacities shown above by the appropriate factor shown below. Ambient Temp. C (F) 60C (140F) 75C (176F) 85C (185F) 90C (194F) 31-40 (87-104) 41-45 (105-113) 46-50 (114-122) 51-60 (123-141) 61-70 (142-158) 71-80 (159-176) .82 .71 .58 ... ... ... .88 .82 .75 .58 .35 ... .90 .85 .80 .67 .52 .30 .91 .87 .82 .71 .58 .41 The overcurrent protection for conductor types marked with an obelisk () shall not exceed 15 amperes for 14AWG and 30 amperes for 10 AWG copper. *For dry locations only. See 75C column for wet locations 56 Mm Fraction 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 Decimal 0.0156 0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.379 0.794 1.191 1.588 1.984 2.381 2.778 3.175 33/64 17/32 35/64 9/16 37.64 19/32 39/64 5/8 Decimal 0.5156 0.5312 0.5469 0.5625 0.5781 0.5938 0.6094 0.6250 13.097 13.494 13.891 14.288 14.684 15.081 15.478 15.875 Mm 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 0.1406 0.1562 0.1719 0.1875 0.2031 0.2188 0.2344 0.2500 3.572 3.969 4.366 4.762 5.159 5.556 5.953 6.350 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 0.6406 0.6562 0.6719 0.6875 0.7031 0.7188 0.7344 .7500 16.272 16.669 17.066 17.462 17.859 18.256 18.653 19.050 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 0.2656 0.2812 0.2969 0.3125 0.3281 0.3438 0.3594 0.3750 6.747 7.144 7.541 7.938 8.334 8.731 9.128 9.525 49/64 26/32 51/64 13/16 53/64 27/32 55/64 7/8 0.7655 0.7812 0.7969 0.8125 0.8281 0.8438 0.8594 0.8750 19.447 19.844 20.241 20.638 21.034 21.431 21.828 22.225 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 0.3906 0.4062 0.4219 0.4375 0.4531 0.4688 0.4844 0.5000 9.922 10.319 10.716 11.112 11.509 11.906 12.303 12.700 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 0.8906 0.9062 0.9219 0.9375 0.9531 0.9688 0.9844 1.0000 22.622 23.019 23.416 23.812 24.209 24.606 25.003 25.400 Amphenol Cord Grips Cord Grip Specifications Amperages of OF Electric Motors MOTORS AMPERAGES ELECTRIC Selected Cord and Cable Diameters Type of Cord SJ, SJO S, SO, ST, STO W Bus Drop Cable AWG Size of Conductors Number of Conductors and Approximate O.D. in Inches 2 3 4 18 16 14 .300 .330 .375 .330 .360 .395 .360 .390 .420 18 16 14 12 10 8 .385 .400 .530 .600 .640 .820-.930 .400 .425 .560 .635 .690 .885-1.010 .430 .480 .605 .665 .745 .975-1.100 6 4 3 2 1 1/0 2/0 3/0 4/0 250 .700-.840 1.080 1.170 1.270 1.440 1.520 1.650 1.770 1.920 2.160 .750-.910 1.170 1.240 1.340 1.510 1.650 1.750 1.890 2.070 2.390 .820-.990 1.270 1.340 1.480 1.680 1.790 1.930 2.070 2.260 - 14 12 10 8 - - - - - - - - .410 .450 .530 .670 NOTE: Dimensions are approximate. When possible consult manufacturer's data. Motor Full Load Current (Amps) Motor Horse Power 200 V. 230V. 460V 575V. 115V. 230V. 1/20 1/12 0.39 0.55 0.34 0.48 0.17 0.24 0.14 0.19 1.30 1.90 0.65 0.95 1/8 1/6 0.74 0.90 0.64 0.78 0.32 0.39 0.26 0.31 2.60 3.24 1.30 1.62 1/4 1/3 1/2 3/4 1.22 1.52 2.07 2.88 1.06 1.32 1.80 2.50 0.53 0.66 0.90 1.25 0.42 0.53 0.72 1.00 4.40 5.47 7.45 10.1 2.20 2.74 3.73 5.07 1 11/2 2 3 3.68 5.18 6.67 9.66 3.20 4.50 5.80 8.40 1.60 2.25 2.90 4.20 1.28 1.80 2.32 3.36 126 17.2 21.4 29.1 6.31 8.59 10.7 14.5 5 71/2 10 15 15.4 22.6 29.7 43.6 13.4 19.6 25.8 38.0 6.68 9.82 12.9 19.0 5.35 7.86 10.3 15.2 42.9 58.4 ... ... 21.4 29.2 36.3 49.4 20 25 30 40 57.4 70.9 84.3 111. 49.9 61.7 73.3 96.4 24.9 30.8 36.7 48.2 20.0 24.7 29.3 38.5 ... ... ... ... ... ... ... ... 50 60 75 137. 163. 201. 119. 142. 175. 59.6 70.8 87.6 47.6 56.6 70.0 ... ... ... ... ... ... Three Phase Single Phase NOTE: These are approximate currents to be used for selecting cord wire sizes. 57 U (R)L DB/DBM GROUP Strain-relief connectors for flexible cord and cable LISTED File No. E53509 CERTIFIED File No. LR-64107 small straight body, male thread Aluminum body and compression nut with washer and single hole oil-resistant grommet This small body connector is ideal for internal uses, as well as conduit hub and panel-board mounting into threaded bodies or with locknuts. Complete units listed require no other parts excecpt cable. Component parts allow expansion or updating of present equipment. CONDUIT HUB SIZE 1 /4" PANEL HOLE SIZE 9 /16" 3 11 1 /2" 7 3 /4" 11/8" 1" 13/8" /8" /16" Suitable for use in hazardous locations per National Electric Code Class I, Div. 2; Class II, Div. 1 & 2; Class III, Div. 1&2. /8" Insulated throat option: Add suffix "T" to all complete assembly part numbers on this page. E.g.: DB-9916T. CORD DIAMETER RANGE IN (MM) .125-.187 (3.17-4.75) .187-.250 (4.75-6.35) .250-.312 (6.35-7.92) .125-.187 (3.17-4.75) .187-.250 (4.75-6.35) .250-.312 (6.35-7.92) .312-.375 (7.92-9.52) .375-.437 (9.52-11.1) .125-.187 (3.17-4.75) .187-.250 (4.75-6.35) .250-.312 (6.35-7.92) .312-.375 (7.92-9.52) .375-.437 (9.52-11.1) .125-.250 (3.17-6.35) .187-.312 (4.75-7.92) .250-.375 (6.35-9.52) .312-.437 (7.92-11.1) .375-.500 (9-52-12.7) *.437-.562 (11.1-14.3) *.500-.625 (12.7-15.9) *.625-.687 (15.9-17.4) *.687-.750 (17.4-19.1) .125-.250 (3.17-6.35) .187-.312 (4.75-7.92) .250-.375 (6.35-9.52) .312-.437 (7.92-11.1) .375-.500 (9.52-12.7) .437-.562 (11.1-14.3) .500-.625 (12.7-15.9) .625-.687 (15.9-17.4) .687-.750 (17.4-19.1) *.750-.875 (19.1-22.2) *.875-1.00 (22.2-25.4) .375-.437 (9.52-11.1) .437-.500 (11.1-12.7) .500-.562 (12.7-14.3) .562-.625 (14.3-15.9) .625-.687 (15.9-17.4) .687-.750 (17.4-19.1) .687-.812 (17.4-20.6) .750-.875 (19.1-22.2) .812-.937 (20.6-23.8) *.875-1.00 (22.2-25.4) COMPLETE ASSEMBLY PART NUMBERS WITH WITH WITH COMPRESSION NUT MECHANICAL NUT WOVEN GRIP DB-44316 DB-4414 DB-44516 DB-4316 DB-414 DB-4516 DB-438 DB-4 DB-3316 DB-314 DB-3516 DB-338 DB-3 DB-7 DB-9516 DB-8 DB-9716 DB-9 DB-9916 DB-10 DB-91116 DB-934 DB-614 DB-6516 DB-638 DB-6716 DB-612 DB-6919 DB-6 DB-111116 DB-11 DB-2514 DB-2516 DB-33716 DB-3312 DB-33916 DB-3358 DB-331116 DB-33 DB-1413 DB-1478 DB-141516 DB-14 ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... DBM-1204-M DBM-1205-M DBM-1206-M DBM-1207-M DBM-1208-M DBM-1209-M DBM-1210-M DBM-1311-M DBM-1312-M DBM-2204-M DBM-2205 DBM-2206-M DBM-2207-M DBM-2208-M DBM-2209-M DBM-2210-M DBM-2311-M DB-2312-M DBM-2514-M DBM-2516-M DBM-3307-M DBM-3308-M DBM-3309-M DBM-3310-M DBM-3311-M DBM-3312-M DBM-3513-M DBM-3514-M DBM-3515-M DBM-3516-M ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... DBKM-1205 DBKM-1206 DBKM-1207 DBKM-1208 DBKM-1209 DBKM-1210 DBKM-1311 DBKM-1312 ..... DBKM-2205 DBKM-2206 DBKM-2207 DBKM-2208 DBKM-2209 DBKM-2210 DBKM-2311 DBKM-2312 DBKM-2514 DBKM-2516 DBKM-3307 DBKM-3308 DBKM-3309 DBKM-3310 DBKM-3311 DBKM-3312 DBKM-3513 DBKM-3514 DBKM-2515 DBKM-3516 *Maximum cord size will not pass through body without removing outer jacket. Other grommets both single and multi-hole are available-see page 70. See pages 60-61 for dimensional information. 58 FORM SIZE 1 BODY BORE--IN (MM) DB-4-G .35 (8.9) 1 DB-4-A .44 (11.2) 1 DB-3-A .44 ( 11.2 2 DB-9-A .64 (16.3 3 DB-934-A .62 (15.7) 2 DB-6-A .64 (16.3) 3 DB-11-A .75 (19.1) DB-25-M .81 (20.6) 5 3 DB-33-A .75 (19.1) 5 DB-14-A 1.03 (26.2) GROMMET DB-4-F DB-4-J DB-4-D DB-4-F DB-4-J DB-4-D DB-4-E DB-4-C DB-4-F DB-4-J DB-4-D DB-4-E DB-4-C DB-9-F DB-9-V DB-9-E DB-9-J DB-9-D DB-9-U DB-9-C DB-11-O DB-11-C DB-9-F DB-9-V DB-9-E DB-9-J DB-9-D DB-9-V DB-9-C DB-11-O DB-11-C DB-14-H DB-14-C DB-11-E DB-11-D DB-11-R DB-11-K DB-11-O DB-11-C DB-14-K DB-14-H DB-14-L DB-14-C PLAIN WASHER COMPONENT PART NUMBERS COMPRESSION MECHANICAL NUT NUT ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... PX-4-CS DB-4-B PX-4-CS DB-4-B PX-4-CS DB-4-B PX-8-CS DB-9-B PX-10 PX-11-CS DB-11-B PX-11 PX-8-B DB-9-B PX-10 PX-11-CS DB-11-B PX-11 PX-14-CS DB-14-B PX-14 PX-11-CS DB-11-B PX-11 PX-14-CS DB-14-B PX-14 WOVEN GRIP ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... DBKG-5 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG12 DBKG-12 ..... DBKG-5 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-12 DBKG-12 DBKG-14 DBKG-16 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-12 DBKG-12 DBKG-14 DBKG-14 DBKG-16 DBKG-16 WOVEN GRIP WASHER WOVEN GRIP NUT ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... PX-8-CS PX-11-CS PX-11-CS ..... PX-8-CS PX-11-CS ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... PX-14-CS DBK-11-W DBK-11-W DBK-11-W DBK-11-W PX-11-CS PX-11-CS PX-14-CS PX-14-CS DBK-14-B DBK-9-B DBK-11-B DBK-11-B DBK-9-B DBK-11-B DBK-11-B DBK-14-B Not required 59 U (R)L DBZM GROUP Strain relief connectors for flexible cord and cable LISTED File No. E3509 CERTIFIED File No. LR-64107 Large straight body, male thread Aluminum body and compression nut with washer and single hole oil-resistant grommet Large body DBZ connectors can CONDUIT be employed in retrofit or new HUB installations. Versatility allows use SIZE in panelboards and in threaded hubs. Component parts are available separately. 1 PANEL HOLE SIZE 1 /4" 13/4" 11/2" 2" 2" 21/2" 21/2" 3" 3" 35/8" Suitable for use in hazardous locations per National Electric Code Class I, Div. 2; Class II, Div. 1 & 2; Class III, Div. 1&2. COMPLETE ASSEMBLY PART NUMBERS CORD DIAMETER RANGE IN (MM) WITH WITH WITH COMPRESSION NUT MECHANICAL NUT WOVEN GRIP .750- .875 (19.1-22.2) .875-1.000 (22.2-25.4) 1.000-1.125 (25.4-28.6) 1.125-1.250 (28.6-31.8) *1.250-1.375 (31.8-34.9) .750- .875 (19.1-22.2) .875-1.000 (22.2-25.4) 1.000-1.125 (25.4-28.6) 1.125-1.250 (28.6-31.8) 1.250-1.375 (31.8-34.9) 1.375-1.500 (34.9-38.1) *1.500-1.625 (38.1-41.3) *1.625-1.750 (41.3-44.5) *1.750-1.875 (44.5-47.6) 1.250-1.375 (31.8-34.9) 1.375-1.500 (34.9-38.1) 1.500-1.625 (38.1-41.3) 1.625-1.750 (41.3-44.5) 1.750-1.875 (44.5-47.6) 1.875-2.000 (47.6-50.8) 2.000-2.125 (50.8-54.0) 2.125-2.250 (54.0-57.2) 2.250-2.375 (57.2-60.3) 1.875-2.000 (47.6-50.8) 2.000-2.125 (50.8-54.0) 2.125-2.250 (54.0-57.2) 2.250-2.375 (57.2-60.3) DBZM-4714 DBZM-4716 DBZM-4718 DBZM-4720 DBZM-4722 DBZM-5714 DBZM-5716 DBZM-5718 DBZM-5720 DBZM-5722 DBZM-5824 DBZM-5826 DBZM-5828 DBZM-5830 DBZM-6822 DBZM-6824 DBZM-6826 DBZM-6828 DBZM-6830 DBZM-7932 DBZM-7934 DBZM-7936 DBZM-7938 DBZM-8932 DBZM-8934 DBZM-8936 DBZM-8938 DBZM-4714-M DBZM-4716-M DBZM-4718-M DBZM-4720-M DBZM-4722-M DBZM-5714-M DBZM-5716-M DBZM-5718-M DBZM-5720-M DBZM-5722-M DBZM-5824-M DBZM-5826-M DBZM-5828-M DBZM-5830-M DBZM-6822-M DBZM-6824-M DBZM-6826-M DBZM-6828-M DBZM-6830-M DBZM-7932-M DBZM-7934-M DBZM-7936-M DBZM-7938-M DBZM-8932-M DBZM-8934-M DBZM-8936-M DBZM-8938-M DBZM-4714-K DBZM-4716-K DBZM-4718-K DBZM-4720-K DBZM-4722-K DBZM-5714-K DBZM-5716-K DBZM-5718-K DBZM-5720-K DBZM-5722-K DBZM-5824-K DBZM-5826-K DBZM-5828-K DBZM-5830-K DBZM-6822-K DBZM-6824-K DBZM-6826-K DBZM-6824-K DBZM-6830-K DBZM-7932-K DBZM-7934-K DBZM-7936-K DBZM-7938-K DBZM-8932-K DBZM-8934-K DBZM-8936-K DBZM-8938-K *Maximum cord size will not pass through body without removing outer jacket. Other grommets both single and multi-hole are available-see page 70. E MAX C A D* B* DB/DBM, FORMS 1, 2, 3, 5 60 COMPONENT PART NUMBERS FORM SIZE BODY BORE-IN (MM) 7-Z DBZ-47-M 1.31 (33.2) 7-Z DBZ-57-M 1.44 (36.6) 8-Z DBZ-58-M 1.56 (39.7) 8-Z DBZ-68-M 1.94 (49.2) 9-Z DBZ-79-M 2.44 (62.0) 9-Z DBZ-89-M 2.44 (62.0) GROMMET PLAIN WASHER DBZ-714 DBZ-716 DBZ-718 DBZ-720 DBZ-722 DBZ-714 DBZ-716 DBZ-718 DBZ-720 DBZ-722 DBZ-824 DBZ-826 DBZ-828 DBZ-830 DBZ-822 DBZ-824 DBZ-826 DBZ-828 DBZ-830 DBZ-932 DBZ-934 DBZ-936 DBZ-938 DBZ-932 DBZ-934 DBZ-936 DBZ-938 DBZ-716-W DBZ-716-W DBZ-720-W DBZ-720-W DBZ-723-W DBZ-716-W DBZ-716-W DBZ-720-W DBZ-720-W DBZ-723-W DBZ-824-W DBZ-826-W DBZ-828-W DBZ-831-W DBZ-824-W DBZ-824-W DBZ-828-W DBZ-828-W DBZ-831-W DBZ-932-W DBZ-936-W DBZ-936-W DBZ-939-W DBZ-932-W DBZ-936-W DBZ-936-W DBZ-939-W COMPRESSION NUT MECHANICAL NUT DBZ-7-B DBZ-7-B DBZ-7-B DBZ-7-M DBZ-8-B DBZ-8-M DBZ-8-B DBZ-8-M DBZ-9-B DBZ-9-M DBZ-9-B DBZ-9-M WOVEN GRIP DBKG-14 DBKG-16 DBKG-18 DBKG-20 DBKG-22 DBKG-14 DBKG-16 DBKG-18 DBKG-20 DBKG-22 DBKG-26 DBKG-26 DBKG-28 DBKG-28 DBKG-22 DBKG-26 DBKG-26 DBKG-28 DBKG-28 DBKG-34 DBKG-34 DKGZ-38 DBKG-38 DBKG-34 DBKG-34 DBKG-38 DBKG-38 WOVEN GRIP WASHER LZW-9316-16A LZW-9316-16A LZW-9316-20A LZW-9316-20A LZW-9316-16A LZW-9316-16A LZW-9316-20A LZW-9316-20A LZW-9320-22A WOVEN GRIP NUT DBZ-7-B DBZ-7-B DBZ-8-B DBZ-8-B DBZ-9-B DBZ-9-B Not required DIMENSIONS A B * ACROSS C FLATS D* E MAX E Max C 1 .88 1.53 - - - 2 1.13 1.84 1.38 2.49 1.66 FORM SIZE 3 5 7-Z 1.25 1.63 2.23 2.06 2.69 3.22 1.38 1.75 2.00 2.69 3.50 4.02 1.66 2.069 2.78 *With nut snug, grommet not compressed. A D* B* DBZ, FORMS 7-Z, 8-Z, 9-Z 61 8-Z 2.53 3.22 2.50 4.43 3.46 9-Z 3.28 3.91 3.00 4.88 4.10 DBL/DBZL GROUP U (R)L Strain-relief connectors for flexible cord and cable LISTED File No. E53509 CERTIFIED File No. LR-64107 90 elbow body, male thread Ferrous alloy body, aluminum compression nut with washer and single hole oil-resistant grommet These 90 connectors allow the installation of cord and cable even in tight quarters. Rugged ferrous alloy body and aluminum compression nut assure long life in abusive situations. Suitable for use in hazardous locations per National Electric Code Class I, Div. 2; Class II, Div. 1 & 2; Class III, Div. 1&2. Insulated throat option: Add suffix "T" to complete assembly part numbers for 1/2"-1" only. E.g.:DBL-3514-MT. CONDUIT HUB SIZE 1 /2" PANEL HOLE SIZE 7 /8" 3 /4" 11/8" 1" 13/8" 11/4" 13/4" 11/2" 2" 2" 21/2" CORD DIAMETER RANGE IN (MM) COMPLETE ASSEMBLY PART NUMBERS WITH WITH WITH COMPRESSION NUT MECHANICAL NUT WOVEN GRIP .125-.250 (3.17-6.35) .187-.312 (4.75-7.92) .250-.375 (6.35-9.52) .312-.437 (7.92-11.1) .375-.500 (9.52-12.7) * .437-.562 (11.1-14.3) * .500-.625 (12.7-15.9) .312-.375 (7.92-9.52) .375-.437 (9.52-11.1) .437-.500 (11.1-12.7) .500-.562 (12.7-14.3) .562-.625 (14.3-15.9) .625-.687 (15.9-17.4) * .687-.750 (17.4-19.1) .687-.812 (17.4-20.6) .750-.875 (19.1-22.2) .812-.937 (20.6-23.8) * .875-1.000 (22.2-25.4) .750-.875 (19.1-22.2) .875-1.000 (22.2-25.4) 1.000-1.125 (25.4-28.6) 1.125-1.250 (28.6-31.8) *1.250-1.375 (31.8-34.9) *1.375-1.500 (34.9-38.1) *1.500-1.625 (38.1-41.3) *1.625-1.750 (41.3-44.5) *1.750-1.875 (44.5-47.6) *1.375-1.500 (34.9-38.1) *1.500-1.625 (38.1-14.3) *1.625-1.875 (44.5-47.6) *1.750-1.875 (44.5-47.6) DB-790 DB-9590 DB-890 DB-9790 DB-990 DB-9990 DB-1090 DB-113890 DB-1171690 DB-111290 DB-1191690 DB-115890 DB-11111690 DB-1190 DB-141390 DB-147890 DB-14151690 DB-1490 DBZL-4714 DBZL-4716 DBZL-4718 DBZL-4720 DBZL-4722 DBZL-5824 DBZL-5826 DBZL-5828 DBZL-5830 DBZL-6824 DBZL-6826 DBZL-6828 DBZL-6830 DBL-1204-M DBL-1205-M DBL-1206-M DBL-1207-M DBL-1208-M DBL-1209-M DBL-1210-M DBL-2306-M DBL-2307-M DBL-2308-M DBL-2309-M DBL-2310-M DBL-2311-M DBL-2312-M DBL-3513-M DBL-3514-M DBL-3515-M DBL-3516-M DBZL-4714-M DBZL-4716-M DBZL-4718-M DBZL-4720-M DBZL-4722-M DBZL-5824-M DBZL-5826-M DBZL-5828-M DBZL-5830-M DBZL-6824-M DBZL-6826-M DBZL-6828-M DBZL-6830-M ..... DBKL-1205 DBKL-1206 DBKL-1207 DBKL-1208 DBKL-1209 DBKL-1210 DBKL-2306 DBKL-2307 DBKL-2308 DBKL-2309 DBKL-2310 DBKL-2311 DBKL-2312 DBKL-3513 DBKL-3514 DBKL-3515 DBKL-3516 DBZL-4714-K DBZL-4716-K DBZL-4718-K DBZL-4720-K DBZL-4722-K DBZL-5824-K DBZL-5826-K DBZL-5828-K DBZL-5830-K DBZL-6824-K DBZL-6826-K DBZL-6828-K DBZL-6830-K *Maximum cord size will not pass through body without removing outer jacket. Other grommets both single and multi-hole are available-see page 70. DBL, FORMS 2, 3, 5 DBLZ, FORMS 7-Z, 8-Z E B B F D C C D A A 62 FORM SIZE BODY BORE-IN (MM) 2 DB-990-A .56 (14.3) 3 DB-1190-A .75 (19.1) 5 DB-1490-A 1.03 (26.2) 7-Z DBZ-47-L 1.25 (31.8) 8-Z DBZ-58-L 1.44 (36.6) 8-Z DBZ-68-L 1.88 (47.7) PLAIN WASHER GROMMET DB-9-F DB-9-V DB-9-E DB-9-J DB-9-D DB-9-U DB-9-C DB-11-V DB-11-E DB-11-D DB-11-R DB-11-K DB-11-O DB-11-C DB-14K DB-14-H DB-14-L DB-14-C DBZ-714 DBZ-716 DBZ-718 DBZ-720 DBZ-722 DBZ-824 DBZ-826 DBZ-828 DBZ-830 DBZ-824 DBZ-826 DBZ-828 DBZ-830 COMPONENT PART NUMBERS COMPRESSION MECHANICAL NUT NUT PX-8-CS DB-9-B PX-10 PX-11-CS DB-11-B PX-11 PX-14-CS DB-14-B PX-14 DBZ-7-B DBZ-7-M DBZ-8-B DBZ-8-M DBZ-8-B DBZ-8-M DBZ-716-W DBZ-716-W DBZ-720-W DBZ-720-W DBZ-723-W DBZ-824-W DBZ-828-W DBZ-828-W DBZ-831-W DBZ-824-W DBZ-828-W DBZ-828-W DBZ-831-W WOVEN GRIP WOVEN GRIP WASHER ..... DBKG-5 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-12 DBKG-12 DBKG-14 DBKG-14 DBKG-16 DBKG-16 DBKG-14 DBKG-16 DBKG-18 DBKG-20 DBKG-22 DBKG-26 DBKG-26 DBKG-28 DBKG-28 DBKG-26 DBKG-26 DBKG-28 DBKG-28 ..... PX-8-CS DBK-11-W DBK-11-W DBK-11-W DBK-11-W DBK-11-W PX-11-C PX-11-C PX-14-CS PX-14-CS LZW-9316-16A LZW-9316-16A LZW-9316-20A LZW-9316-20A WOVEN GRIP NUT DBK-9-B DBK-11-B DBK-14-B DBZ-7-B DBZ-8-B DBZ-8-B Not required DIMENSIONS A B C D ACROSS FLATS E F MAX E F 63 2 1.13 1.88 1.44 1.38 2.53 1.66 FORM SIZE 3 5 1.25 1.63 1.86 2.94 1.56 2.00 1.38 1.75 2.51 3.75 1.66 2.06 With nut snug, grommet not compressed. 7-Z 2.23 3.28 2.38 2.00 4.12 2.78 8-Z 2.53 3.78 2.88 2.50 4.69 3.46 U (R)L DBA GROUP Strain relief connectors for flexible cord and cable LISTED File No. E53509 CERTIFIED File No. LR-64107 45 elbow body, male thread Ferrous alloy body, aluminum compression nut with washer and single hole oil-resistant grommet Customize your installation with our 45 DBA connectors. Like the DBL, the steel body and aluminum compression nut will provide many years of trouble free service. CONDUIT HUB SIZE PANEL HOLE SIZE 1 /2" 7 3 /4" 11/8" 1" 13/8" /8" Insulated throat option: Add suffix "T" to all complete assembly part numbers on this page. E.g.:DBKA-3513-T. CORD DIAMETER RANGE IN (MM) .125-.250 (3.17-6.35) .187-.312 (4.75-7.92) .250-.375 (6.35-9.52) .312-.437 (7.92-11.1) .375-.500 (9.52-12.7) * .437-.562 (11.1-14.3) *.500-.625 (12.7-15.9) .312-.375 (7.92-9.52) .375-.437 (9.52-11.1) .437-.500 (11.1-12.7) .500-.562 (12.7-14.3) .562-.625 (14.3-15.9) .625-.687 (15.9-17.4) *.687-.750 (17.4-19.1) .687-.812 (17.4-14.2) .750-.875 (19.1-22.2) .812-.937 (14.2-23.8) *.875-1.000 (22.2-25.4) COMPLETE ASSEMBLY PART NUMBERS WITH WITH WITH COMPRESSION NUT MECHANICAL NUT WOVEN GRIP DB-745 DB-9545 DB-845 DB-9745 DB-945 DB-9945 DB-1045 DB-113845 DB-1171645 DB-111245 DB-1191645 DB-15845 DB-11111645 DB-1145 DB-141345 DB-147845 DB-14151645 DB-1445 DBA-1204-M DBA-1205-M DBA-1206-M DBA-1207-M DBA-1208-M DBA-1209-M DBA-1210-M DBA-2306-M DBA-2307 DBA-2308-M DBA-2309-M DBA-2310-M DBA-2311-M DBA-2312-M DBA-3513-M DBA-3514-M DBA-3515-M DBA-3516-M ..... DBKA-1205 DBKA-1206 DBKA-1207 DBKA-1208 DBKA-1209 DBKA-1210 DBKA-2306 DBKA-2307 DBKA-2308 DBKA-2309 DBKA-2310 DBKA-2311 DBKA-2312 DBKA-3513 DBKA-3514 DBKA-3515 DBKA-3516 *Maximum cord size will not pass through body without removing outer jacket. Other grommets both single and multi-hole are available-see page 70. C C D B A FORM SIZE 2 3 5 1.13 1.25 1.63 1.31 1.56 2.31 1.31 1.38 1.44 1.96 2.21 3.12 1.38 1.38 1.75 1.66 1.66 2.06 With nut snug, grommet not compressed E F 64 DIMENSIONS A B C D EACROSS FLATS FMAX FORM SIZE BODY BORE-IN (MM) 2 DB-945-A .56 (14.3) 3 DB-1145-A .75 (19.1) 5 DB-1445-A 1.03 (26.2) GROMMET DB-9-F DB-9-V DB-9-E DB-9-J DB-9-D DB-9-U DB-9-C DB-11-V DB-11-E DB-11-D DB-11-R DB-11-K DB-11-O DB-11-C DB-14-K DB-14-H DB-14-L DB-14-C PLAIN WASHER COMPONENT PART NUMBERS COMPRESSION MECHANICAL NUT NUT PX-8-CS DB-9-B PX-10 PX-11-CS DB-11-B PX-11 PX-14-CS DB-14-B PX-14 WOVEN GRIP ..... DBKG-5 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-12 DBKG-12 DBKG-14 DBKG-14 DBKG-16 DBKG-16 WOVEN GRIP WASHER ..... PX-8-C DBK-11-W DBK-11-W DBK-11-W DBK-11-W DBK-11-W PX-11-CS PX-11-CS PX-14-CS PX-14-CS WOVEN GRIP NUT DBK-9-B DBK-11-B DBK-14-B Not required 65 U (R)L DBF GROUP Strain-relief connectors for flexible cord and cable LISTED File No. E53509 CERTIFIED File No. LR-64107 Straight body, female thread Aluminum body and compression nut with single hole oil-resistant grommet For panelboard and bulkhead CONDUIT HUB installations, as well as for drop SIZE cords and cables from overhead power sources. Also for mounting to existing threaded conduit and 3 /8" to conduit nipples. PANEL HOLE SIZE /16" 7 3 11/8" 1" 13/8" /4" COMPLETE ASSEMBLY PART NUMBERS WITH WITH WITH COMPRESSION NUT MECHANICAL NUT WOVEN GRIP .125-.187 (3.17-4.75) .187-.250 (4.75-6.35) .250-.312 (6.35-7.92) .312-.375 (7.92-7.52) .375-.437 (9.52-11.1) .125-.187 (3.17-4.75) .187-.250 (4.75-6.35) .250-.312 (6.35-7.92) .312-.375 (7.92-9.52) .375-.437 (9.52-11.1) .125-.250 (3.17-6.35) .187-.312 (4.75-7.92) .250-.375 (6.35-9.52) .312-.437 (7.92-11.1) .375-.500 (9.52-12.7) .437-.562 (11.1-14.3) .500-.625 (12.7-15.9) .125-.250 (3.17-6.35) .187-.312 (4.75-7.92) .250-.375 (6.35-9.52) .312-.437 (7.92-11.1) .375-.500 (9.52-12.7) .437-.562 (11.1-14.3) .500-.625 (12.7-25.4) .625-.687 (15.9-17.4) .687-.750 (17.4-19.1) .687-.812 (17.4-20.6) .750-.875 (19.1-22.2) .812-.937 (20.6-23.8) .875-.937 (22.2-25.4) 11 1 /2" CORD DIAMETER RANGE IN (MM) /8" DBF--4316 DBF-414 DBF-4516 DBF-438 DBF-4 DBF-3316 DBF-314 DBF-3516 DBF-338 DBF-3 DBF-7 DBF-9516 DBF-8 DBF-9716 DBF-9 DBF-9916 DBF-10 DBF-614 DBF-6516 DBF-638 DBF-6716 DBF-612 DBF-6916 DBF-6 DBF-111116 DBF-11 DBF-1413 DBF-1478 DBF-141516 DBF-14 ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... Use Form 2 Use Form 2 DBF-1204-M DBF-1205-M DBF-1206-M DBF-1207-M DBF-1208-M DBF-1209-M DBF-1210-M DBF-2204-M DBF-2205-M DBF-2206-M DBF-2207-M DBF-2208-M DBF-2209-M DBF-2210-M DBF-2311-M DBF-2312-M DBF-3513-M DBF-3514-M DBF-3515-M DBF-3516-M ..... DBKF-1205 DBKF-1206 DBKF-1207 DBKF-1208 DBKF-1209 DBKF-1210 ..... DBKF-2205 DBKF-2206 DBKF-2207 DBKF-2208 DBKF-2209 DBKF-2210 DBKF-2311 DBKF-2312 DBKF-3513 DBKF-3514 DBKF-3515 DBKF-3516 FORM SIZE DIMENSIONS 1 E MAX D A A B C D E MAX 2 .88 1.13 1.53 1.84 - 2.49 - 1.38 - 1.66 3 5 1.25 2.05 2.70 1.38 1.66 1.63 2.59 3.40 1.75 2.06 With nut snug, grommet not compressed. C* B* 66 FORM SIZE BODY BORE-IN (MM) 1 DBF-4-A .440 (11.2) 1 DBF-3-A .440 (11.2) 2 DBF-9-A .620 (15.7) 2 DBF-6-A .620 (15.7) 3 DBA-11-A .750 (19.1) 5 DBF-14-A 1.030 (26.2) GROMMET DB-4-F DB-4-J DB-4-D DB-4-E DB-4-C DB-4-F DB-4-J DB-4-D DB-4-E DB-4-C DB-9-F DB-9-V DB-9-E DB-9-J DB-9-D DB-9-V DB-9-C DB-9-F DB-9-V DB-9-E DB-9-J DB-9-D DB-9-V DB-9-C DB-11-O DB-11-C DB-14-K DB-14-H DB-14-L DB-14-C PLAIN WASHER COMPONENT PART NUMBERS COMPRESSION MECHANICAL WOVEN NUT NUT GRIP PX-4-CS DB-4-B PX-4-CS DB-4-B PS-8-CS DB-9-B ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... DBKG-5 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 ..... DBKG-5 DBKG-6 DBKG-8 DBKG-8 DBKG-10 DBKG-10 DBKG-12 DBKG-12 DBKF-14 DBKG-14 DBKG-16 DBKFG-16 PX-10 PX-8-CS DB-9-B PX-10 PX-11-CS DB-11-B PX-11 PX-14-CS DB-14-B PX-14 WOVEN GRIP WASHER WOVEN GRIP NUT ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... PX-8-CS ..... PX-8-CS PX-11-CS PX-11-CS PX-14-CS PX-14-CS ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... *FLARED NIPPLE HUB MAX. PANEL PART SIZE THICKNESS NO. Used for mounting type DBF connectors on sheet metal boxes and cabinets, and for drop cords/cables from overhead power distribution ducts. 3/8" 1/2" 3/4" 1" Flared Nipple not included unless specially ordered. To include flared nipple with assembly change catalog numbers as follows: 1/8" 3/16" 3/16" 1/4" DH-38 DH-1 DH-2 DH-3 * with compression nut, change DBF to DHF * with mechanical nut, change DBF to DBH * with weave grip, change DBKF to DBKH DH-38 DH-1 DBK-9-B DH-1 ..... DBK-9-B DH-2 DBK-11-B DH-2 DBK-14-B DH-3 DIMENSIONS A B .86 .44 1.00 .56 1.25 .80 1.50 1.00 C D E F .33 .44 .44 .56 .12 .12 .12 .19 .09 .12 .12 .16 .69 .86 1.09 1.36 E B F - Recommended minimum clearance (Standard knockouts satisfactory). A C 67 FLARED NIPPLE* D DBZP GROUP Strain-relief panelboard and bulkhead connector Straight body, male thread aluminum body and compression nut with washer, gasket, and single hole oil-resistant grommet These bulkhead mounting cord connectors have an oil-resistant rubber gasket furnished with each body which permits mounting from either the front or the back of panels and bulkheads. CONDUIT HUB SIZE 13/8"* Where 45 angle mounting is required, choose adapters listed on page 72. As with the other DB Series grips, the DBZP provides effective strain-relief and is liquid-tight through the assembled unit. 17/8"* 23/8"* 27/8"* 33/8"* Note: See page 72 for information on Panelboard Adapters & Conduit Fitting Boxes CORD DIAMETER RANGE IN (MM) COMPLETE ASSEMBLY PART NUMBERS WITH WITH WITH COMPRESSION NUT MECHANICAL NUT WOVEN GRIP .062- .125 (1.57-3.17) .125- .250 (3.17-6.35) .250- .375 (6.35-9.52) .375- .500 (9.52-12.7) .500- .625 (12.7-15.9) .625- .750 (15.9-19.1) .750- .875 (19.1-22.2) .750- .875 (19.1-22.2) .875-1.000 (22.2-25.4) 1.000-1.125 (25.4-28.6) 1.125-1.250 (28.6-31.8) 1.250-1.375 (31.8-34.9) 1.250-1.375 (31.8-34.9) 1.375-1.500 (34.9-38.1) 1.500-1.625 (38.1-41.3) 1.625-1.750 (41.3-44.5) 1.750-1.875 (44.5-47.6) 1.750-1.875 (44.5-47.6) 1.875-2.000 (47.6-50.8) 2.000-2.125 (50.8-54.0) 2.125-2.250 (54.0-57.2) 2.250-2.375 (57.2-60.3) 2.250-2.375 (57.2-60.3) 2.375-2.500 (60.3-63.5) 2.500-2.625 (63.5-66.7) 2.625-2.7500 (66.7-69.9) 2.750-2.875 (69.9-73.0) DBZP-502 DBZP-504 DBZP-506 DBZP-508 DBZP-510 DBZP-512 DBZP-514 DBZP-714 DBZP-716 DBZP-718 DBZP-720 DBZP-722 DBZP-822 DBZP-824 DBZP-826 DBZP-828 DBZP-830 DBZP-930 DBZP-032 DBZP-934 DBZP-936 DBZP-938 DBZP-1038 DBZP-1040 DBZP-1042 DBZP-1044 DBZP-1046 ..... ..... DBZP-506-M DBZP-508-M DBZP-510-M DBZP-512-M DBZP-514-M DBZP-714-M DBZP-716-M DBZP-718-M DBZP-720-M DBZP-722-M DBZP-822-M DBZP-824-M DBZP-836-M DBZP-828-M DBZP-830-M DBZP-930-M DBZP-932-M DBZP-934-M DBZP-936-M DBZP-938-M DBZP-1038-M DBZP-1040-M DBZP-1042-M DBZP-1044-M DBZP-1046-M ..... ..... DBZP-506-K DBZP-508-K DBZP-510-K DBZP-512-K DBZP-514-K DBZP-714-K DBZP-716-K DBZP-718-K DBZP-720-K DBZP-722-K DBZP-822-K DBZP-824-K DBZP-836-K DBZP-828-K DBZP-830-K DBZP-930-K DBZP-932-K DBZP-934-K DBZP-936-K DBZP-938-K DBZP-1038-K DBZP-1040-K DBZP-1042-K DBZP-1044-K DBZP-1046-K * Bore hole in panelboard 1/64" larger than dimension "E" for back mounting. A FORM SIZE B D A B MOUNTING HOLES MAX MOUNTING SCREW SIZE D E F E C-Diam. 3/16" Max. panel thickness for rear mounting F 68 7-Z 2 1/ 8" 8-Z 2 5/ 8" 9-Z 3 1/ 8" 10-Z 3 3/ 4" 1 1/ 4" 1 11 / 16 " 2 3 / 32 " 2 17 / 32 " 3 1 / 32 " 3 C A B 5-Z** 1 8/ 8" ACROSS FLATS / 16 " 7 #8 #10 2 15 / 16 " 2 15 / 32 " 2 15 / 32 " 2 15 / 32 " 2 15 / 32 " 1 3/ 8" 1 7/ 8" 2 3/ 8" 2 7/ 8" 3 3/ 8" 21 1 / 32 " / 32 " 1 2 / 32 " 9 / 32 " 1 /4 17 2 / 32 " With nut snug, buit grommet not compressed. **No adapter avaliable for from size 5-Z 11 5 / 32 " / 16 1 3 / 32 " 11 5 / 32 " / 16 3 19 / 32 " FORM SIZE BODY BORE-IN (MM) 5-Z DBZ-5-P .937 (23.8) 7-Z DBZ-7-P 1.437 (36.5) 8-Z DBZ-8-P 1.937 (49.2) 9-Z DBZ-9-P 2.437 (61.9) 10-Z DBZP-10-P 2.875 (73.0) GROMMET DBZ-502 DBZ-504 DBZ-506 DBZ-508 DBZ-510 DBZ-512 DBZ-514 DBZ-714 DBZ-716 DBZ-718 DBZ-720 DBZ-722 DBZ-822 DBZ-824 DBZ-826 DBZ-828 DBZ-830 DBZ-930 DBZ-932 DBZ-934 DBZ-936 DBZ-938 DBZ-1038 DBZ-1040 DBZ-1042 DBZ-1044 DBZ-1046 PLAIN WASHER DBZ-504-W DBZ-504-W DBZ-508-W DBZ-508-W DBZ-512-W DBZ-512-W DBZ-515-W DBZ-716-W DBZ-716-W DBZ-720-W DBZ-720-W DBZ-723-W DBZ-824-W DBZ-824-W DBZ-828-W DBZ-828-W DBZ-831-W DBZ-932-W DBZ-932-W DBZ-936-W DBZ-936-W DBZ-939-W DBZP-1040-W DBZP-1040-W DBZP-1044-W DBZ-1044-W DBZ-1046-W COMPONENT PART NUMBERS COMPRESSION MECHANICAL NUT NUT ..... ..... DBZ-5-B DBZ-5-M DBZ-7-M DBZ-7-M DBZ-8-B DBZ-8-M DBZ-9-B DBZ-9-M DBZ-10-B DBZ-10-M WOVEN GRIP ..... ..... DBKG-6 DBKG-8 DBKG-10 DBKG-12 DBKG-14-Z DBKG-14 DBKG-16 DBKG-18 DBKG-20 DBKG-22 DBKG-22 DBKG-26 DBKG-26 DBKG-28 DBKG-28 DBKG-28 DBKG-34 DBKG-34 DBKG-38 DBKG-38 DBKG-38 DBKG-40-Z DBKG-46-Z DBKG-46-Z DBKG-46-Z WOVEN GRIP WASHER ..... ..... LZW-9312-10A LZW-9312-10A LZW-9312-12A LZW-9312-12A LZW-9316-16A LZW-9316-16A LZW-9316-20A LZW-9316-20A LZW-9320-22A LZW-9324-28A LZW-9328-38A Not required 69 WOVEN GRIP NUT ..... ..... DBZ-5-B DBZ-7-B DBZ-8-B DBZ-9-B DBZ-10-B GROMMETS U (R)L LISTED for DB/DBZ series connectors CERTIFIED Molded oil-resistant synthetic rubber These tapered grommets fit in the tapered bodies of all appropriate DB Series metallic connectors. They provide strain-relief by gripping the cord jacket inside the grommet, and efficiently seal out water and oil from internal connections. CABLE RANGE (inches) BLANK .062-.125 .125-.187 .125-.250 .187-.250 .187-.312 .250-.312 .250-.375 Amphenol(R)/Pyle(R) rubber grommets .312-.375 are specially compounded and .312-.437 .375-.437 molded to resist age-hardening, adding many more years to the life .375-.500 of installations. .437-.500 .437-.562 .500-.562 .500-.625 .562-.625 .562-.687 .625-.687 .625-.750 .687-.750 .687-.812 .750-.875 .812-.937 .875-.937 .875-1.000 1.000-1.125 1.125-1.250 1.250-1.375 1.375-1.437 1.375-1.500 1.500-1.625 1.625-1.750 1.750-1.875 1.875-1.937 1.875-2.000 2.000-2.125 2.125-2.250 2.250-2.375 2.375-2.437 2.375-2.500 2.500-2.625 2.625-2.750 2.750-2.875 FORM1 FORM2 FORM 3 DB-4-Z DB-9-Z DB-11-Z FORM 5 FORM 5Z FORM 7Z FORM 8Z FORM 9Z FORM 10Z DBZ-502 DB-4-F DB-9-F DBZ-504 DB-4-J DB-9-V DB-4-D DB-11-X DB-9-E DB-4-E DBZ-506 DBZ-706 DBZ-508 DBZ-708 DBZ-510 DBZ-710 DBZ-810 DB-14-J DBZ-512 DBZ-712 DBZ-812 DB-14-K DB-14-H DB-14-L DBZ-514 DBZ-714 DBZ-814 DB-11-4 DB-9-J DB-4-C DB-14-N DB-11-E DB-9-D DB-11-D DB-9-U DB-14-M DB-11-R DB-9-C DB-11-K DB-14-E DB-11-O DB-11-C DBZ-515 DB-14-C DBZ-716 DBZ-718 DBZ-720 DBZ-722 DBZ-723 DBZ-816 DBZ-818 DBZ-820 DBZ-822 DBZ-916 DBZ-918 DBZ-920 DBZ-922 DBZ-824 DBZ-826 DBZ-828 DBZ-830 DBZ-831 DBZ-924 DBZ-926 DBZ-928 DBZ-930 DBZ-932 DBZ-934 DBZ-936 DBZ-938 DBZ-939 DBZ-1038 DBZ-1040 DBZ-1042 DBZ-1044 DBZ-1046 70 Multi-hole grommets C BODY AND COMPRESSION NUT USED Form 1 B A 2 Hole Form 2 3 Hole Form 5 Form 2 Form 3 A NOMINAL SIZE PART NO. CORD OR CABLE DB-4-H .170 DB-9-MA .100 DB-9-X .125 DB-9-XA .156 DB-9-H .250 DB-9-O .281 DB-14-D .437 DB-9-L .218 DB-11-M .281 B C /32 3/8 15 /16 5/8 15 /16 5/8 15 /16 5/8 15 /16 5/8 15 /16 5/8 9 1 /32 11/32 15 /16 5/8 1 1 /32 23/32 21 Cord protecting sleeve/grommet BODY AND COMPRESSION NUT USED Form 2 71 PART NO. DBY-9-J A NOMINAL SIZE CORD OR CABLE .312 to .437 C B OVERALL O.D. LENGTH 15 /16 3 ACCESSORIES Panelboard adapters Aluminum construction. Accepts DBZP panelboard FORM SIZE connectors 7-Z All adapter covers come complete with screws and 8-Z clips for mounting the connector, plus bolts, washers, and gasket for attaching cover to panel or 9-Z conduit fitting box. 10-Z PART NUMBER DIMENSIONS A B C D E F ZP-C-2516-12 3 4 /16" 3 4 /16" 9 3 /16" 9 15 3 /16" 2 /16" 1 ZP-C-2520-12 41 / 2 " 41 / 2 " 37 / 8 " 37 / 8 " 339/64" 1 33 11 /4-20 x /4" 1 /16" /4-20 x 3/4" ZP-C-2524-12 8" 8" 7" 7" 3 /64" 1 ZP-C-2528-12 8" 8" 7" 7" 35 / 8 " 1 A C G 3 23/32" 3 217/32" /2-13 x /4" /2-13 x 3/4" 31/32" E F B D G 1/16" GASKET Conduit fitting boxes A Ferrous alloy construction Conduit fitting box to fit adapters. Mounting hardware is not included. Thru-feed styles available upon request. E C F G A E C F G 8" H B D B D H Form sizes 7-Z & 8-Z Form sizes 9-Z & 10-Z FORM SIZE 7-Z 8-Z 9-Z CONDUIT HUB SIZE 3 / 4" 1" 11/4" 11/2" 11/4" 11/2" 2" 21/2" 3" PART NUMBER P-202760-42 P-202760-43 P-202760-64 P-202760-65 JRZ-610064 JRZ-610065 JRZ-610066 JR-720036-A JRZ-820036-A 72 DIMENSIONS A B C D E F G H 9 /32" DIA. 39/16" 9 /32" DIA. 7 /16" DIA. 37/8" 13 /16" 13 /16" 1" 1" 51/4" 51/4" 45/8" 45/8" 23/8" 6" 6" 51/4" 51/4" 33/4" 17/16" 8" 103/4" 63/4" 91/2" 33/4" 41/2" 17/8" 21/8" 7" Cord Grip handles For use with Star-Line(R) and other electrical devices that are tapped for conduit and use flexible cord or cable. TYPE PH D-HANDLE A These handles not only fit electrical connectors, but will also work well on heavy duty portable equipment. Both D and T handles are made of cast aluminum and come complete with a locknut on male thread "A." Hub "B" accepts type DB cord grips with male thread (not included) Serves also as a convenient means for hanging your plugs, receptacles or portable equipment. PART NUMBER PH-2 PH-3 PH-5 "A" MALE THREAD 3/4" 1" 11/2" "B"FEMALE THREAD 3/4" 1" 11/2" PHA-22 PHA-33 3/4" 1" 3/4 1" B TYPE PHA T-HANDLE A B 73 Amphenol Industrial Operations Additional Amphenol(R) / Pyle(R) Industrial Products Amphenol is one of the largest manufacturers of interconnect solutions worldwide. Amphenol's broad offering of products are highly suitable for industrial applications where cable glands and cord grip products are used. Several of the Amphenol Heavy Duyy Connectors are shown here and on the next page. For more information, please see relevant literature or Amphenol's Website: www.amphenol-industrial.com Star-Line(R) Heavy Duty Connectors Amphenol/Pyle Star-Line connectors are heavy duty environmental solutions for high amperage and high density control and instrumentation applications. They are designed to perform up to amperages of 1135 amps at 1000/VAC or VDC rating. Other features include: * Exceeds MIL-5015 E and R specifications * UL listed and CSA listed * Double lead Acme threads provide complete coupling in one turn of the coupling nut and do not clog under adverse weather conditions * Large wiring space provided in cable housing and conduit fitting bodies. * Operating temperatures from -67F to +257F * IP67 rated for environmental sealing. * Hard anodic coating provides dielectric strength with heat and corrosion resistance. * 5 Shell styles with over 150 insert patterns available. * Solder, crimp and pressure terminals available. Circuit breaking power and control types. * Variety of backend accessories including basketweave cable grips, straight or angled adapters and receptacle mounted to junction boxes. Typical markets include mass transportation, automotive tooling, power generation, and petrochemical. For more information ask for catalog 12-054. Star-Line EX(R) Connectors for Harsh/Explosive Environments Amphenol/Pyle Star-Line EX connectors are a hybrid form of the Star-Line series with higher temperature ranges. This family shares features of the Star-Line with additional features that include: * Ceneluc Certified for use in Zone 1-IIc locations. * EX Certified to ATEX certification #03ATEX 1101X * Can be terminated onto unarmored or armored and sheathed cables built to several popular standards. * Custom cable assemblies are available Typical markets include mass transportation, pharmaceutical, manufacturing, power generation, and petrochemical. For more information, ask for catalog 12-054. 74 Amphenol Industrial Operations Additional Amphenol(R) / Pyle(R) Industrial Products Amphenol offers RADSOK(R) contact technology for several industrial connectors. The RADSOK contact is designed for high amperage applications. Star-Line(R) and MIL-5015 Connectors with RADSOK(R) Connectors enhanced with RADSOK high amperage contacts can handle up to 150% higher amperages than connectors with standard contacts. These are called AmphePowerTM Connectors and are currently offered in three popular industrial connector families: * 5015 AC Series * GT Reverse Bayonet * Pyle P-Lok Series Also, the Star-Line Series has inserts available with special RADSOK contacts, and the Neptune(R) Series is offered exclusively with RADSOK contacts. The RADSOK patented contact has a hyperbolic, stamped grid configuration within the socket cylinder. As a male pin is inserted, axial members in the female socket deflect, enabling high current flow across the connection with minimal voltage loss. Typical markets: power generation, petrochemical, and mass transportation. For more information on RADSOK high amperage contacts, ask for Brochure SL-391, Amphe-PowerTM Connectors with RADSOK Technology. Amphenol Neptune(R) Connectors with RADSOK(R) The Neptune(R) Series is a new power connector family featuring the RADSOK contact system. Feature include: * * * * * * * Machined aluminum components IP 68-8 rated through SIRA Operating temperature rated to -67F to +225F Three key design to limit cross mating. Anodic hardcoat plating. Double lead acme threads for easy coupling. Decreased weight and panel layout in comparison to the competition. * Contacts are nickel silver alloy plated and they are designed for longer life/mating cycles. The Neptune is offered exclusively with RADSOK contact technology. Currently inserts are available with 30 Amp through 400 Amp/480 volts. Typical Markets include oil exploration equipment, convention center power distribution, geophysical trucks, portable power distribution equipment, and communication shelters. For more information on the Neptune Series of connectors ask for Product Data Sheet 192. 75 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: DB2-020P DBZM-5714-M