19
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
High Voltage
Dielectric Strength is equal to 1.5 times rated voltage (WVDC) for 500 volt capacitors
and 1.2 times (WVDC) for 1,000 through 5,000 volt capacitors. Circuit applications
in excess of 1,000 volts may require a surface coating to prevent external arcing.
How To Order
C1206 C0G 501 — 101 J N h E
Series Temperature Rated Voltage Capacitance Tolerance Code: Termination Marking Packaging
See Chart Characteristic 1st two digits (pico - Farads) *F = ± 1% P = Palladium Silver 6 = EIA “J” Code E = Embossed Tape
are significant, 1st two digits *G = ± 2% N = Nickel barrier, “Leave blank if
followed by are significant J = ± 5% Tinned Termination No Marking”
number of zeros followed by number K = ± 10% Standard termination finish for this product
201 = 200V of zeroes. M = ± 20% is 100% matte Tin (Sn)
251 = 250V 101 = 100 pF
501 = 500V R denotes decimal *NP0/C0G only
*601 = 600V 6R8 = 6.8 pF
*631 = 630V
102 = 1000V
202 = 2000V
302 = 3000V
402 = 4000V
502 = 5000V
SPECIFICATIONS:
OPERATING TEMPERATURE RANGE: -55°C to +125°C
TEMPERATURE COEFFICIENT: 0 ± 30PPM/°C
TEMPERATURE VOLTAGE COEFFICIENT: 0 ± 30PPM/°C
DISSIPATION FACTOR: 0.1% MAX.
INSULATION RESISTANCE: >1000 ohms F or 100 G ohms,
whichever is less at 25°C, VDCW.
(The IR at 125°C is 10% of the value at 25°C)
WITHSTANDING VOLTAGE: See below
TEST PARAMETERS: 1MHZ ± 50KHZ at 1.0 ± 0.2 Vrms ≤ 100 pF, 25°C
1KHZ ± 50HZ at 1.0 ± 0.2 Vrms > 100 pF, 25°C
CAPACITANCE TOLERANCE: *F, *G, J, K *NP0/C0G only
NP0/C0G:
Class I dielectric;
ultra stable electrical
characteristics over time,
voltage, frequency and
temperature changes.
Low dielectric loss.
SPECIFICATIONS:
OPERATING TEMPERATURE RANGE: -55°C to +125°C
TEMPERATURE COEFFICIENT: 0 ± 15%∆°C MAX.
TEMPERATURE VOLTAGE COEFFICIENT: X7R not applicable
DISSIPATION FACTOR: 2.5% MAX.
IINSULATION RESISTANCE: >1000 ohms F or 100 G ohms,
whichever is less at 25°C, VDCW.
(The IR at 125°C is 10% of the value at 25°C)
WITHSTANDING VOLTAGE: See below
TEST PARAMETERS: 1KHz ± 50Hz at 1.0 ± 0.2 Vrms, 25°C
CAPACITANCE TOLERANCE: J, K, M
X7R:
Stable Class II dielectric.
All components in this section are RoHS compliant per the EU directives and definitions.
* 600V and 630V capacitors are available for any 500V capacitor ranges.