CORPORATION a N-Channel JFET General Purpose Amplifier 2N4117 2N4119/2N4117A 2N4119A PN4117 PN4119 /PN4117A PN4119A/SST4117 SST4119 PIN CONFIGURATION TO-92 10-72 G c D s os 4 5007 FEATURES e Low Leakage e Low Capacitance ABSOLUTE MAXIMUM RATINGS (Ta = 25C unless otherwise noted) Gate-Source or Gate-Drain Voltage Gate Current Storage Temperature Range Le tenet ett eee 50mA Lee ee eee ees -65C to +200C Operating Temperature Range ........... -55C ta +175C Lead Temperature (Soldering, 10sec) ............. +300C Power Dissipation .......... 0000. e ee eee eee 300mW Derate above 25C ooo. e eee 2.0mW/C NOTE: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. PRODUCT MARKING (SOT-23) ORDERING INFORMATION SST4117 Ti7 Part Package Temperature Range SST4118 Tis 2N4117-19/A Hermetic TO-72 -55C to +175C Sstaiie T19 PN4117-19/A Plastic TO-92 -55C to +135C SST4117-19 Plastic SOT-23 -55C to +135C X2N4117-19/A Sorted Chips in Carriers -55C to +175C ELECTRICAL CHARACTERISTICS (Ta = 25C unless otherwise specified) SYMBOL PARAMETER ANIA | A118/A_| 4119/4 units] TEST CONDITIONS MIN |MAX]| MIN | MAX] MIN | MAX BVass Gate-Source Breakdown Voltage -40 -40 -40 V lig =-1pA, Vos = 0 Gate Reverse Current -10 -10 -10 A [A devices A a + |? [Ves =-20V, Vos = 0 lass -25 -25 -25 - nA Ta = +150C [A devices -2.5 -2.5 -2.5 Vasioth Gate-Source Pinch-Off Voltage -0.6 | -1.8] -1 3 | -2 | 6 Vs 1Vos = 10V, Ip = 1nA loss Drain Current at Zero Gate Voltage (Note 1) 0.02 | 0.09 | 0.08 | 0.24 | 0.20] 0.60] mA |Vos = 10V, Vas = 0 Gls Common-Source Forward Transconductance (Note 1} 70 | 210 | 80 | 250] 100 | 330 Vos = 10V, f = 1kHz fs CGommon-Source Forward Transconductance (Note 2) 60 70 90 BS {Ves = 0, f = 30MHz Jos Common-Source Output Conductance 3 5 10 Vos = 10V, Vas = 0, f = 1kHz Ciss Common-Source Input Capacitance (Note 2) 3 3 3 jos Me Vas = 0, pF } Crss Common-Source Reverse Transfer Capacitance (Note 2) 15 15 15 wos one Ves = 0, NOTES; 1. Pulse test: Pulse duration of 2ms used during test. 2. For design reference only, not 100% tested. 8-1