www.fairchildsemi.com NE5532 Dual Operational Amplifier Features Description * * * * The NE5532 is a internally compensated dual low noise OP-AMP. The high small signal and power bandwidth provides superior performance in high quality AMP, all control circuits, and telephone applications. Internal Frequency Compensation Slew Rate: 8V/s Input Noise Voltage: 8nV Hz (fo = 30Hz) Full Power Bandwidth: 140KHz 8-DIP 1 8-SOP 1 Internal Block Diagram Rev. 1.0.1 (c)2002 Fairchild Semiconductor Corporation NE5532 Absolute Maximum Ratings Parameter Symbol NE5532 Unit VCC 22 V V(DIFF) 13 V Input Voltage VI Supply Voltage V Power Dissipation, TA = 25C 8-DIP 8-SOP PD 1100 500 mW Operating Temperature Range TOPR 0 ~ + 70 C Power Supply Voltage Differential Input Voltage Thermal Data Parameter Thermal Resistance Junction-Ambient Max. 8-DIP 8-SOP Symbol Value Unit Rja 110 250 C/W Electrical Characteristics (VCC=15V, VEE= - 15V, TA = 25C) Parameter Input Offset Voltage Conditions Min. Typ. Max. Unit VIO - - 0.5 4.0 mV IIO - - 10 150 nA IBIAS - - 200 800 nA Supply Current ICC - - 6.0 16 mA Input Voltage Range VI(R) - 12 13 - V 70 100 - dB Input Offset Current Input Bias Current Common Mode Rejection Range CMRR TA = 25 C PSRR TA = 25 C 80 100 - dB VO(P-P) RL 600 12 13 - V Input Resistance RI TA = 25 C 30 300 - K Short Circuit Current ISC - 38 - mA Overshoot OS RL =600, CL =100pF - 10 20 % GV f = 10KHz 2 2.2 - V/mV CL =100pF, RL = 600 8 10 - MHz Power Supply Rejection Ratio Output Voltage Swing Voltage Gain Gain Bandwidth Product 2 Symbol GBW - Slew Rate SR RL =1K, CL =100pF, RL =600 6 8.0 - V/s Input Noise Voltage eN fO = 30Hz fO = 1KHz - 8.0 5.0 - nV/ Hz NE5532 Typical Performance Characteristics Figure 1. Open Loop Frequency Response Figure 2. Large Signal Frequency Response Figure 3. Supply Current vs Supply Voltage Figure 4. Input Bias Current vs Temperature Figure 5. Output Circuit Current vs Temperature Figure 6. Slew Rate 3 NE5532 Mechanical Dimensions Package Dimensions in millimeters 1.524 0.10 #5 2.54 0.100 5.08 MAX 0.200 7.62 0.300 3.40 0.20 0.134 0.008 +0.10 0.25 -0.05 +0.004 0~15 4 0.010 -0.002 3.30 0.30 0.130 0.012 0.33 MIN 0.013 0.060 0.004 #4 0.018 0.004 #8 9.60 MAX 0.378 #1 9.20 0.20 0.362 0.008 ( 6.40 0.20 0.252 0.008 0.46 0.10 0.79 ) 0.031 8-DIP NE5532 Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP MIN #5 6.00 0.30 0.236 0.012 8 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 MAX0.10 MAX0.004 1.80 MAX 0.071 3.95 0.20 0.156 0.008 5.72 0.225 0.41 0.10 0.016 0.004 #4 1.27 0.050 #8 5.13 MAX 0.202 #1 4.92 0.20 0.194 0.008 ( 0.56 ) 0.022 1.55 0.20 0.061 0.008 0.1~0.25 0.004~0.001 0.50 0.20 0.020 0.008 5 NE5532 Ordering Information Product Number Package NE5532N 8-DIP NE5532D 8-SOP Operating Temperature 0 ~ +70C DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 3/5/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation