oe FUS3881 CMOS Chopper Stabilized, Hall-Effect Sensor (Latch) 2.2V-18V Features FUS 3681 1 Optimized for BCD Motor Application ae eect Latch 11 Operating Voltage Range: 2.2V to 18V ~ (4 CMOS Device for Optimal Stability {4 Chopper Stablized: No Amplifier Offset Reguisior Voltage 1 ~=Activate With Commercially Available Permanent Magnets 1 2 3 4 ~=Thin, High Reliability SIP Package Veo GND Output 2 = Available in SQT23 Package QO Solid State Switch with I, = 20mA The FUS3881 sensor family comes in four guaranteed The FUS3881 Hall-Effect sensor IC family is designed in CMOS technology providing chopper stabilized amplifiers with switched capacitors. Therefore these magnetic field sensor devices have no amplifier offset voltage which in bipolar designed devices is the main reason for temperature sensitive output signal drift. The sensors output transistor will be in the latched- on state (Bop) in the presence of a sufficiently strong South-Pole magnetic field, facing the marked side of the SIP package. The sensor output will be in the latched-off state (B,,) in the presence of a North-Pole field. temperature specifications to meet the needs of various commercial and industrial applications. Typical applications for these devices are: sensing of speed, linear position, and angular position. Though there are many applications where the FUS3881 sensor IC can be used, its performances have been optimized for commutation applications of 5V and 12V brushless DC motors. Absolute Maximum Ratings Characteristic Symbol Device Rating Unit Power Supply Voltage Voo All 20 v Supply Current - leo Al 10 mA Output Switch Current tour All 20 mA Power Dissipation P, All 100 mW FUS 3881UA 0... #70 Operating Ambient Temperature Range T, FUS 3881SUA | -20... +85 c FUS 3681EUA AO ... +85 Storage Temperature Range tT, ALL 65 ... +150 *c 7-6FUS3881 CMOS Chopper Stabilized, Hall-Effect Sensor (Latch) 2.2V-18V o Electrical Characteristics at TA = 25C, +/-2C, V,,, = 12V (unless otherwise noted) wg i ag: Limits Characteristics Symbol Applic able Test Conditions . Devices Min. Typ. Max. | Units Supply Voltage Voo All Operating 2.2 20 v Supply Current loo All B BY, 04 05 Vv Output Leakage Current lp All B < BRP Vous = 20V 0.01 4 pA Propagation Delay _ _ Low to High (Turn-On) ten All RI=1.1kQ2 Cl = 20pF 0.04 us Propagation Delay _ = High to Low (Turn-Off toa All RI=1.4kQ Cl = 20pF 0.18 us FUS 3881 Series Latch - Magnetic characteristics Limits at 25C Characteristics | Symbol Min. Typ. Max. | Units Magnetic Thresholds Bop 10 45 90 G Magnetic Thresholds Turn-Off Bap 90 -45 -10 G b.- B) Bye | 70 90 140} G 7-7FUS3881 CMOS Chopper Stabilized, Hall-Effect Sensor Semiconductor (Latch) 2.2V-18V Supply Current vs Supply Voltage ; Typical Hysteresis vs Temperature Supply Current (kc) in mA oy oO bh wm G VN @O 180 50 -25 0 25 50 75 100 125 150 Ambient Temperature {T,) in C n a s c o Ta=1 Q 3 6 9 412 16 18 21 24 Supply Valtage (Vec) inV 50 -25 0 25 S50 75 100 125 150 Ambient Temperature (T,) in C Magnetic Switch Points vs Temperature Typical Switch Points vs Temperature 450 400 oO o 50 = tt a. & = = -50 = = = = a & -100 | \ -150 -150 500-25 0) 25 8075 100125150 50-25 0 25 50 75 100 126 150 . tn Ambient Temperature (T,) inC Ambient Temperature (TA) in OC ! . . | Typical Saturation Voltage vs Temperature Wave Soldering Parameters : 280 : | Vee = 2.2V to 12V | 260 | > Ig = 20m ! IE % 240 3 i & 8 : E 220 | | e i i B 200 1 : 3S i i i | 0 5 10 15 20 Time in Wave Solder in Secondso FUS3881 CMOS Chopper Stabilized, Hall-Effect Sensor (Latch) 2.2V-18V 3 Lead SIP Package (Lingsen) 3 Lead SIP Package (AUK) be o+ ~-D | u . a2 2==prt oe yee ae rie S wo sf Marking Marking | g Surface Surface az ai r = <= i ' FUsta \ : a |. u i FUSI8 | : : . : Me a 7 at t itr qh r ui | b2 a | ii j +t) +t } ne { L | L I : b bt i JST Ts 7 ot iB oe 4 ae * kc