Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC725LC3C v04.0514 HIGH SPEED LOGIC - SMT 14 Gbps, FAST RISE TIME XOR / XNOR GATE Typical Applications Features The HMC725LC3C is ideal for: Inputs Terminated Internally to 50 Ohms * 16 G Fiber Channel Differential or Single-Ended Operation * RF ATE Applications Fast Rise and Fall Times: 19 / 18 ps * Broadband Test & Measurement Low Power Consumption: 230 mW typ. * Serial Data Transmission up to 14 Gbps Propagation Delay: 105 ps * Digital Logic Systems up to 14 GHz Single Supply: -3.3 V 16 Lead Ceramic 3x3 mm SMT Package: 9 mm 2 Functional Diagram General Description The HMC725LC3C is a XOR/XNOR gate function designed to support data transmission rates of up to 14 Gbps, and clock frequencies as high as 14 GHz. All differential inputs to the HMC725LC3C are CML and terminated on-chip with 50 Ohms to the positive supply, GND, and may be DC or AC coupled. The differential CMl outputs are source terminated to to 50 Ohms and may also be AC or DC coupled. Outputs can be connected directly to a 50 Ohm ground-terminated system or drive devices with CML logic input. The HMC725LC3C operates from a single -3.3 V supply and is available in ROHS-compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 C, Vee = -3.3 V Parameter Conditions Power Supply Voltage Typ. Max -3.6 -3.3 -3.0 Units V Power Supply Current 70 mA Maximum Data Rate 14 Gbps Maximum Clock Rate 14 GHz Input Voltage Range -1.5 0.5 V Input Differential Range 0.1 2.0 Vp-p Input Return Loss 10 dB Single-Ended, peak-to-peak 550 mVp-p Differential, peak-to-peak 1100 mVp-p Output High Voltage -10 mV Output Low Voltage -560 mV 19 / 18 ps Output Amplitude Output Rise / Fall Time 1 Min. Frequency <14 GHz Differential, 20% - 80% For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE Electrical Specifications (continued) Conditions Min. Typ. Frequency <14 GHz Max Units 10 Small Signal Gain dB 27 Random Jitter Jr dB rms 0.2 peak-to-peak, 215 -1 PRBS input [1] Deterministic Jitter, Jd Propagation Delay, td ps rms 2 ps, p-p 105 ps [1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output DC Current vs. Supply Voltage Output Differential Voltage vs. Supply Voltage [2] [1] 1500 DC CURRENT (mA) 85 VOUT DIFFERENTIAL (mVp-p) 90 +25C +85C -40C 80 75 70 65 60 55 -3.8 -3.6 -3.4 -3.2 -3 1300 1200 1100 1000 -3.7 -2.8 +25C +85C -40C 1400 -3.6 -3.5 Output Differential Voltage vs. Frequency [3] -3.3 -3.2 -3.1 -3 -2.9 -3.1 -3 -2.9 Rise / Fall Time vs. Supply [1] 1300 25 1200 23 1100 RISE/FALL TIME (ps) VOUT DIFFERENTIAL (mVp-p) -3.4 SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) 1000 900 800 700 2 HIGH SPEED LOGIC - SMT Parameter Output Return Loss 4 6 8 10 12 14 [2] Frequency = 10 GHz 19 17 -3.6 -3.5 -3.4 -3.3 -3.2 SUPPLY VOLTAGE (V) FREQUENCY (GHz) [[1] Data rate = 13 Gbps 21 15 -3.7 16 tr tf [3] Vee = -3.3 V For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE 3 Input Return Loss vs. Frequency 0 0 -5 -5 RETURN LOSS (dB) RETURN LOSS (dB) HIGH SPEED LOGIC - SMT Output Return Loss vs. Frequency -10 -15 -20 -25 -10 -15 -20 -25 -30 -30 0 2 4 6 8 FREQUENCY (GHz) 10 12 14 0 2 4 6 8 10 12 14 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 10 Gbps PN code, Vin = 300 mVp-p differential. Both output channels shown. Timing Diagram HIGH SPEED LOGIC - SMT Eye Diagram Truth Table Input A Notes: A = AP - AN B = BP - BN D = DP - DN Outputs B D L L L L H H H L H H H L H - Positive voltage level L - Negative voltage level For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE HIGH SPEED LOGIC - SMT Absolute Maximum Ratings Power Supply Voltage (Vee) -3.75 V to +0.5 V Input Signals -2 V to +0.5 V Output Signals -1.5 V to +1 V Continuous Pdiss (T = 85 C) (derate 17 mW/C above 85 C) 0.68 W Thermal Resistance (Rth j-p) Worst case junction to package paddle 59 C/W Maximum Junction Temperature 125 C Storage Temperature -65 C to +150 C Operating Temperature -40 C to +85 C ESD Sensitivity (HBM) Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST BE SOLDERED TO GND. Package Information Part Number Package Body Material Lead Finish HMC725LC3C Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H725 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE Pin Descriptions Function Description 1, 4, 5, 8, 9, 12 GND These pins must be connected to a high-quality RF/DC ground. 2, 3 6, 7 AN, AP BP, BN Differential Data Inputs, Current Mode Logic (CML) referenced to positive supply. 10, 11 DN, DP Differential Data Outputs, Current Mode Logic (CML) referenced to positive supply 13, 16 Vee Negative Supply 14, Package Base GND Supply Ground 15 N/C No Connection required. This pin may be connected to RF/DC ground without affecting performance. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HIGH SPEED LOGIC - SMT Pin Number 6 HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE HIGH SPEED LOGIC - SMT Evaluation PCB List of Materials for Evaluation PCB 122520 [1] Item Description J1 - J6 PCB Mount SMA RF Connectors J7, J9 DC Pin C1 4.7 F Capacitor, Tantalum C5 100 pF Capacitor, 0402 Pkg. U1 HMC725LC3C High Speed Logic, XOR / XNOR PCB [2] 122518 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 7 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC725LC3C v04.0514 14 Gbps, FAST RISE TIME XOR / XNOR GATE HIGH SPEED LOGIC - SMT Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC725LC3C 122520-HMC725LC3C HMC725LC3CTR HMC725LC3CTR-R5