Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 125
Altech's pneumatic crimping tools
speed the crimping process of insulat-
ed or uninsulated ferrules for a wide
range of wire sizes up to 8 AWG.
Altech pneumatic crimpers are simple
and easy to use. Just install the ferrule
over the end of the stripped wire and
insert it into either the front or side tool
opening. Then touch the actuating lever
or push the footswitch pedal to initiate
the crimp cycle. Once the head closes it
will automatically reopen after crimp-
ing. The resulting crimp features a com-
pact trapezoidal cross section which is
mechanically very strong and provides
a large surface to insure a highly effi-
cient electrical contact.
Crimp ferrules efficiently and economi-
cally. A unique dual crimping head pro-
vides convenient front or side wire
entry, allowing crimping from multiple
positions. This features makes crimping
in tight places simple.
Choose either lever actuated, hand
held units or hands-free footswitch
operated table top models, in two basic
tool sizes. Hand held models feature a
flexible coil air-hose with 1/4" NPT
interchange connector for quick hook-
up with a standard push-to-connect
coupler.
The table top units also include a flexi-
ble coil air hose to the footswitch and a
1/4" NPT interchange located on the
footswitch for one hand push-to-con-
nect supply hook-up. They feature a
sturdy metal base with integral table
clamp and dual storage trays for quick
access to the ferrule supply. The air
release port on the footswitch has been
quieted with a sintered bronze air
silencer. The footswitch has a metal
frame and a tough fiberglass shroud.
Its spring return pedal provides for
short actuating cycles.
Optional items for the hand held
crimper include a counterbalance for
maximum control and a magnetic hold-
er for storage.
• Operates on 60 - 90 psi air supply
• Crimp insulated and uninsulated
ferrules
• Trapezoidal crimp geometry
• Flexible coil air hose with 1/4"
NPT interchange
• Metal tool body and base
• Hardened steel crimp head
Wire/ Ferrule Size Tool Wt.
Tool AWG mm2 Type Cat. No. g (lbs.) Std. Pk.
Hand Held Crimper with Actuating Lever ACT2.5-P 22.014 430 (.95) 1
Crimp Insulated Ferrules 24-14 0.25-2.5
and Uninsulated Ferrules
Hand Held Crimper with Actuating Lever ACT10-P 22.015 430 (.95) 1
Crimp Insulated Ferrules 12-8 4.0-10.0
and Uninsulated Ferrules
Table Top Crimper with Footswitch and Storage Trays ACT2.5-T 22.016 1000 (2.20) 1
Crimp Insulated Ferrules 24-14 0.25-2.5
and Uninsulated Ferrules
Table Top Crimper with Footswitch and Storage Trays ACT10-P 22.017 1000 (2.20) 1
Crimp Insulated Ferrules 12-8 4.0-10.0
and Uninsulated Ferrules
Magnetic Mounting Holder ACT-DXP 22.018 --- 1
for hand held pneumatic crimpers
Counterbalance CT-DUP 22.019 --- 1
for hand held pneumatic crimpers
Pneumatic Crimping Tool