selos / fasis
selos / fasis
DIN Rail Terminal Blocks with
Screw, Tension Spring and
Push-In Connection Technologies
Catalog 2013
automation
building
electronics
2
G
Company headquarters
in Bamberg
G Sales and
Marketing Center
in Bamberg
G STOCKO main plant in
Wuppertal
The group makes us strong
Wieland Holding is based in Bam-
berg, Bavaria, and comprises two
independently acting subsidiaries:
Wieland Electric and STOCKO Contact.
Groundbreaking innovations made
Wieland Electric one of the leading
suppliers of electrical connection
technology. This company, founded
in Bamberg in 1910, is the largest
subsidiary of Wieland Holding.
STOCKO Contact is based in Wuppertal
and joined the Wieland Group in 2001.
Stocko has also more than 100 years
of company history to its credit and
is one of the largest manufacturers of
connector systems and crimp contacts.
The Wieland Group employs more than
2,000 people all around the globe. With
some 15 locations and subsidiaries, and sales
partners in more than 70 countries,
Wieland Holding is present in nearly all
important key markets worldwide.
Always with a clear commitment to the
German location where most of the products
are still manufactured.
ACTIVE WORLDWIDE
contacts are green
3
Established in industries
Control cabinet engineering, industrial
automation, building system technology
– our large product portfolio provides
solutions for all kinds of applications.
From innovative interface and net-
work technology to terminal blocks to
"safety first" – with modular system
solutions and safety components.
With Wieland products in your control
cabinet, you are always on the safe side.
Energy bus systems for distributed
automation or indoor and outdoor field
bus components – Wieland technolo-
gy can be found everywhere, and in all
kinds of applications.
In building system technology, Wieland
Electric is the world market leader in
pluggable eletrical installation.
There are good reasons why our
system solutions can be found
in the most spectacular building
projects worldwide. When it comes to
electronic networking, Wieland leads
the way to the “smart home”.
Welcome Future
Wieland Electric is 100 years young,
and full of innovative energy. And
our commitment for the future is not
only to find constantly new system
solutions for our customers but also
social responsibility.
Environmentally friendly high-tech
products, manufactured to the la-
test production standards, an audited
environmental management system
and substantial investments in our
locations are all part to this concept.
Global commitment and sustainable
regional action – Wieland Electric is fit
for the future: Contacts are green.
4
fasis / selos
Wieland DIN Rail Terminal Blocks – Overview
DIN rail terminal blocks with screw connection
Feed-through blocks
starting at page 12
Multi-tier blocks
starting at page 22
Function blocks
starting at page 24 + 38
Mini blocks
starting at page 50
Ground blocks
starting at page 16
Initiator blocks
starting at page 26
Instrument isolating
terminals
starting at page 40
selos
CLASSIC
starting at page 52
Duo feed-through blocks
starting at page 20
Fuse blocks
starting at page 28
DIN rail terminal blocks
with ring lug connection
starting at page 45
Knife edge
disconnect blocks
starting at page 20+31
DIN rail terminal blocks
with plug-in connection
starting at page 34
High current terminal blocks
starting at page 46
DIN rail terminal blocks with push-in connection
Feed-through blocks
starting at page 114
Ground blocks
starting at page 116
Duo feed-through blocks
starting at page 118
5
fasis / selos
DIN rail terminal blocks with tension spring connection
Feed-through blocks
starting at page 62
Fuse blocks
starting at page 90
Ground blocks
starting at page 72
DIN rail terminal blocks
with plug-in connection
starting at page 94
Duo feed-through blocks
starting at page 78
Initiator blocks
starting at page 100
Knife edge
disconnect blocks
starting at page 88
Mini blocks
starting at page 104
Accessories, software and service
Accessories
starting at page 120
Software
starting at page 138
Service, Facts & Data
starting at page 139
6
fasis / selos
Wieland DIN Rail Terminal Blocks – One System
DIN rail terminal blocks with screw connection – selos
3 product families, 3 connection technologies – our DIN rail terminal block program is the right choice
for every installation, wherever the control cabinet is found-in machinery or plant engineering, energy
technology or building installation, or with screw, tension spring or push-in connection.
The ultimately fl exible DIN rail terminal block systems selos and fasis offer optimum handling and
harmonized accessories. This guarantees not only fast wiring time, but also reduces cost of inventory
at your facility and in the supply chain.
Customized assembly service, customer-specifi c solutions and a comprehensive service portfolio
match our products individually with the requirements of our customers.
DIN rail terminal blocks with push-in connection – fasis WTP
7
fasis / selos
– Many Possibilities
DIN rail terminal blocks with tension spring connection
– fasis
WKFN
Accessories, software and service
8
selos
selos
9
selos – DIN Rail Terminal Blocks
with Screw Connection
Reliable connection, proven concept! selos is our DIN rail
terminal block with screw connection, solid and functional,
known worldwide, and in use millions of times over.
The selos series combines the classic screw connection with
modern connection technology, with the focus on customer
benefi ts and increased effi ciency in wiring and the supply chain.
The selos CLASSIC series offers the highest-quality connecting
technology. Thanks to its unique clamping body design,
aluminum or copper wire connections are long-lasting and
maintenance-free.
The selos product line includes feed-through and ground blocks
with 2, 3 or 4 termination points, multi-tier blocks in two- and
three-tier designs, knife-edge disconnect blocks and fuse blocks.
In addition, specialty function blocks are available with a wide
variety of diode circuits and diverse application-specifi c terminals,
such as transformer disconnect terminals.
selos has been designed for use in machinery and plant
construction as well as hazardous locations subject to explosion.
Connection cross-section up to 240 mm²
Rated current up to 415 A
Rated voltage up to 1000 V
10
selos
DIN Rail Terminal Blocks with Screw Connection
Smaller size
Uniform design
Fewer accessories
Simply connect
• Multi-wire connection
• Connect with or without ferrules
Reliable and maintenance-free
• Rugged clamping body design
• One-piece threaded collar
• Stress-free connecting and
reconnecting
Time-saving assembly
• Snap-on screwless ground blocks
Plug & Play
• Dual jumpering channels
• Plug-in jumper bars
• Plug-in test adapter
11
selos
Marking strips – Dependable
• Maximum hold to the terminal
•
Solidify integrity of rail assembly Endless strip – Effective
• Mounting facility for endless strips permits
single step marking of entire assembly
• Continuous labeling
• Uses commercially available labeling
systems
Marking tags – Individual
• Individual labeling with
minimum effort
• Ideal for service and maintenance
Wieland marking system – Reliable identifi cation
Wieland jumpering system – Perfect technology
Extremely rugged!
• Indestructible steel spring
• Vibration-proof connection
Simple customization
• Individual poles easy to remove
• Circuits easy to identify
Perfect technology
• Copper current bar guarantees low contact
resistance
• Steel spring guarantees strength, durability,
and long-term stability
Copper
Steel
WT 2,5 58.503.0055.0 100
WT 2,5 BL 58.503.0055.6 100
WT 4 58.504.0055.0 100
WT 4 BL 58.504.0055.6 100
WT 6 58.506.0055.0 100
WT 6 BL 58.506.0055.6 100
5 mm / 48 mm / 48 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
26 – 12 26 – 12
24 A 20 A 20 A
1000 V 600 V 600 V
8 kV
3
6 mm / 48 mm / 48 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
26 – 10 26 – 10
32 A 30 A 30 A
1000 V 600 V 600 V
8 kV
3
8 mm / 48 mm / 48 mm
11 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
24 – 8 24 – 8
41 A 50 A 50 A
1000 V 600 V 600 V
8 kV
3
AP WT 2,5-10 07.313.2555.0 10
IVB WKF 2,5-2 Z7.280.6227.0 10
IVB WKF 2,5-3 Z7.280.6327.0 10
IVB WKF 2,5-4 Z7.280.6427.0 10
IVB WKF 2,5-5 Z7.280.6527.0 10
IVB WKF 2,5-10 Z7.280.7027.0 20
IVB WKF 2,5-20 Z7.280.8027.0 20
AP WT 2,5-10 07.313.2555.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-3 Z7.261.1327.0 10
IVB WKF 4-4 Z7.261.1427.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-10 Z7.261.2027.0 20
AP WT 2,5-10 07.313.2555.0 10
IVB WKFN 6-2 Z7.282.5227.0 10
IVB WKFN 6-3 Z7.282.5327.0 10
IVB WKFN 6-4 Z7.282.5427.0 10
IVB WKFN 6-5 Z7.282.5527.0 10
IVB WKFN 6-10 Z7.282.6027.0 10
12
selos
Feed-through blocks with screw connection
WT 2,5
WT 6
WT 4
• Feed-through block with screw connection for
mounting on TS 35
• Nominal cross section 2.5 mm2
• Max. electrical data: 32 A / 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 1.5 mm2
• Feed-through block with screw connection for
mounting on TS 35
• Nominal cross section 6 mm2
• Max. electrical data: 57 A / 10 mm2
• Connection capacity: 2 wires, equal size
0.2 – 4 mm2
• Feed-through block with screw connection for
mounting on TS 35
• Nominal cross section 4 mm2
• Max. electrical data: 41 A / 6 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 4 mm2pending
Cross section solid/stranded 0.14 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 10 mm2pending
Cross section solid/stranded 0.2 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate
Cross connector 2 pole
3 pole
4 pole
5 pole
10 pole
20 pole
Accessories
Type Part No. Std. Pack
End plate
Cross connector 2 pole
3 pole
4 pole
5 pole
10 pole
Accessories
Type Part No. Std. Pack
End plate
Cross connector 2 pole
3 pole
4 pole
5 pole
10 pole
AD WT 2,5 04.344.1455.8 10
AD WT 4 04.344.1655.8 10
AD WT 6/10 04.344.1855.8 10
AD WT 6/10 04.344.1855.8 10
AD WT 16 04.344.2255.8 10
TW WT 2,5-10 07.313.2655.0 10
TW WT 4E 07.313.2855.0 10
PS WKC/F Z1.299.9753.0 10
ZP/AP PS 07.312.6053.0 10
WT 10 58.510.0055.0 50
WT 10 BL 58.510.0055.6 50
WT 16 58.516.0055.0 50
WT 16 BLAU 58.516.0055.6 50
10 mm / 48 mm / 48 mm
13 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
20 – 6 20 – 6
57 A 65 A 65 A
1000 V 600 V 600 V
8 kV
3
12 mm / 58 mm / 54mm
15 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
16 – 4 16 – 4
76 A 85 A 85 A
1000 V 600 V 600 V
8 kV
3
AP WT 2,5-10 07.313.2555.0 10
IVB WKF 10-2 Z7.283.8227.0 10
AP WT 16 07.313.2755.0 10
IVB WKF 16-2 Z7.284.4227.0 10
13
selos
WT 10
WT 16
• Feed-through block with screw connection for
mounting on TS 35
• Nominal cross section 10 mm2
• Max. electrical data: 76 A / 16 mm2
• Connection capacity: 2 wires, equal size
0.5 – 6 mm2
• Feed-through block with screw connection for
mounting on TS 35
• Nominal cross section 16 mm2
• Max. electrical data: 101 A / 25 mm2
• Connection capacity: 2 wires, equal size
2.5 – 10 mm2
Accessories
Type Part No. Std. Pack
Cover with warning symbol for WT 2,5
for WT 4
for WT 6
for WT 10
for WT 16
Partition for WT 2,5 – WT 10
Partition for WT 16
Test adapter modular for WT 2,5 and 4
End plate for test adapter *
Accessories for selos WT 2,5 – WT 16
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 16 mm2pending
Cross section solid/stranded 0.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 4 – 25 mm2pending
Cross section solid/stranded 1.5 – 25 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate
Cross connector 2 pole
Accessories
Type Part No. Std. Pack
End plate
Cross connector 2 pole
* for WT4 an end cover plate must be snapped in after each test connector
16 mm / 71 mm / 68 mm
18 mm
NJ8TMnD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
10 – 35 mm210 – 2 AWG 12 – 2 AWG 10 – 35 mm2
10 – 50 mm210 – 50 mm2
125 A 150 A 150 A 86/124 A
1000 V 600 V 600 V 690 V1)
8 kV
3
24 mm / 77 mm / 81 mm
24 mm
NJ8TMD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
10 – 70 mm26 – 2/0 AWG 6 – 2/0 AWG 10 – 70 mm2
16 – 95 mm216 – 95 mm2
192 A 175/175 A 170 A 179/179 A2)
1000 V 600 V 600 V 690 V
8 kV
3
28 mm / 96 mm / 99 mm
30 mm
8TMD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
35 – 150 mm2
2 / 0 AWG - 350 kcmil 2 / 0 AWG - 350 kcmil
35 – 150 mm2
35 – 185 mm235 – 185 mm2
309 A 335/335 A 365 A 290/309 A2)
1000 V 600 V 600 V 690 V
8 kV
3
WKN 35/U 57.535.0155.0 20
WKN 35/U BLAU 57.535.0155.6 20
WKN 70/U 57.570.0155.0 20
WKN 70/U BLAU 57.570.0155.6 20
WKN 150/U 57.597.0155.0 10
WKN 150/U BLAU 57.597.0155.6 10
TWN 35 07.311.7855.0 10
IVB WKN 35 - 2 Z7.285.2227.0 5
IVB WKN 35 - 3 Z7.285.2327.0 5
IVB WKN 35 - 6 Z7.285.2627.0 5
IVB WKN 35 - 12 Z7.285.3227.0 5
AD VB 35 GELB 04.326.2553.8 10
AD VB 16/4 GELB 04.343.5256.8 10
TWN 70 07.311.7955.0 10
VB WKN 70 - 2 Z7.286.3227.0 10
VB WKN 70 - 3 Z7.286.3327.0 10
VB WKN 70 - 6 Z7.286.3627.0 10
AD VB 70 GELB 04.326.2653.8 10
AD VB 24/4 GELB 04.343.5356.8 10
VB WKN 150 - 2 Z7.287.1227.0 5
VB WKN 150 - 3 Z7.287.1327.0 5
VB WKN 150 - 6 Z7.287.1627.0 5
AD VB 28/4 GELB 04.343.5456.8 10
WKN 150 / U
WKN 70 / U
WKN 35 / U
14
selos
Feed-through blocks with screw connection
1) For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a jumper are
to be enclosed by partitions 2) With/without jumper
Feed-through block, gray
Feed-through block Exi, blue
Feed-through block, gray
Feed-through block Exi, blue
Feed-through block, gray
Feed-through block Exi, blue
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 35 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Enclosed design
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 150 mm2
• Ex e I/II ?II GD IM2
Follow the EX installation instructions on page 143
• Enclosed design
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 70 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Enclosed design
Accessories
Type Part No. Std. Pack
Partition, gray
Cross connector with screws, 2 pole
insulated 3 pole
up to 6 pole
up to 12 pole
Single cover with marking facility
Cover with warning symbol over 4 blocks
Accessories
Type Part No. Std. Pack
Partition, gray
Cross connector with screws, 2 pole
insulated 3 pole
up to 6 pole
Single cover with marking facility
Cover with warning symbol over 4 blocks
Accessories
Type Part No. Std. Pack
Partition, gray
Cross connector with screws, 2 pole
insulated 3 pole
up to 6 pole
Cover with warning symbol over 4 blocks
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
WKN 70 3D/N/SL/U 57.570.9855.0 1
WKN 70 3D/2N/SL/U 57.570.9955.0 1
WKN 150/70 3D/N/SL/U 57.597.9855.0 1
WKN 150/3D/N/U 57.597.9955.0 1
15
selos
Supply set
Supply set
Supply set
Supply set
Supply set
Description Type Part No. Std. Pack
IEC UL CSA ?
EN 60 94-7-2
26 – 12 26 – 12
1000 V 600 V 600 V
8 kV
3
AP WT 2,5 - 10 07.313.2555.0 10
AP WT 2,5 - 10 07.313.2555.0 10
AP WT 2,5 - 10 07.313.2555.0 10
WT 2,5 PE 58.503.9055.0 100
WT 4 PE 58.504.9055.0 100
WT 6 PE 58.506.9055.0 100
6 mm / 48 mm / 48 mm
9 mm
IEC UL CSA ?
EN 60 94-7-2
26 – 10 26 – 10
1000 V 600 V 600 V
8 kV
3
8 mm / 48 mm / 48 mm
11 mm
IEC UL CSA ?
EN 60 94-7-2
24 – 8 24 – 8
1000 V 600 V 600 V
8 kV
3
WT 2,5 PE
WT 4 PE
WT 6 PE
16
selos
Ground blocks with screw connection
Ground block, green/yellow
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 2.5 mm2
• Connection capacity: 2 wires, equal size
0.14 – 1.5 mm2
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 6 mm2
• Connection capacity: 2 wires, equal size
0.2 – 4 mm2
Accessories
Type Part No. Std. Pack
End plate
Accessories
Type Part No. Std. Pack
End plate
Accessories
Type Part No. Std. Pack
End plate
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5 5 mm / 48 mm / 48 mm
Wire strip length 9 mm
Approvals EMD
Technical data
Cross section fi ne-stranded 0.14 – 4 mm2pending
Cross section solid/stranded 0.14 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals EMD
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals EMD
Technical data
Cross section fi ne-stranded 0.2 – 10 mm2pending
Cross section solid/stranded 0.2 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
10 mm / 48 mm / 48 mm
13 mm
IEC UL CSA ?
EN 60 94-7-2
20 – 6 20 – 6
1000 V 600 V 600 V
8 kV
3
AP WT 2,5 - 10 07.313.2555.0 10
AP WT 16 07.313.2755.0 10
WT 10 PE 58.510.9055.0 50
WT 16 PE 58.516.9055.0 100
12 mm / 58 mm / 54 mm
15 mm
IEC UL CSA ?
EN 60 94-7-2
16 – 4 16 – 4
1000 V 600 V 600 V
8 kV
3
WT 10 PE
WT 16 PE
17
selos
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 10 mm2
• Connection capacity: 2 wires, equal size
0.5 – 6 mm2
Accessories
Type Part No. Std. Pack
End plate
Accessories
Type Part No. Std. Pack
End plate
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 16 mm2
• Connection capacity: 2 wires, equal size
2.5 – 10 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals EMD
Technical data
Cross section fi ne-stranded 0.5 – 16 mm2pending
Cross section solid/stranded 0.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals EMD
Technical data
Cross section fi ne-stranded 4 – 25 mm2pending
Cross section solid/stranded 1.5 – 25 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
16 mm / 63 mm / 68 mm
20 mm
EJ8TMnD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
10 – 2 10 – 2
800 V 600 V 600 V
8 kV
3
WKN 35 SL/U 57.535.9055.0 20
WKN 70 SL/U 57.570.9055.0 20
24 mm / 75 mm / 81 mm
E8TMD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
6 – 2/0 6 – 2/0
800 V
8 kV
3
WKN 35 S L / U
WKN 70 SL / U
18
selos
Ground blocks with screw connection
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35 and TS 32
• Nominal cross section 35 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
•
Enclosed design
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35 and TS 32
• Nominal cross section 70 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Enclosed design
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 10 – 35 mm210 – 35 mm2
Cross section solid/stranded 10 – 50 mm210 – 50 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length 24 mm
Approvals
Technical data
Cross section fi ne-stranded 10 – 70 mm210 – 70 mm2
Cross section solid/stranded 16 – 95 mm216 – 95 mm2
Cross section, AWG
Rated current
Rated voltage 600 V 600 V
Rated impulse voltage
Pollution degree
17 mm / 56 mm / 35 mm
AM KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
8 – 2
600 V
9700 A/35 E S 35 Z2.302.0621.0 25
9700 A/70 E S 35 Z2.302.0421.0 10
25 mm / 57 mm / 57 mm
MD KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
6 – 2/0 6 – 2/0
600 V
9700 A / 35 E S 35
9700 A / 70 E S 35
19
selos
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 35 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
• Ground block with screw connection for mounting
on TS 35
• Nominal cross section 70 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 35 mm2
Cross section solid/stranded 50 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 70 mm2
Cross section solid/stranded 120 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
WT 4 TKM 58.504.2055.0 100
WT 4 TKM BL 58.504.2055.6 100
WT 4 TKM P 58.504.2355.0 100
6 mm / 56 mm / 50 mm
9 mm
EMD
IEC UL CSA
26 – 10 26 – 10
24 A 16 A 16 A
500 V 300 V 300 V
6 kV
3
WT 4 TKM...
6 mm / 56 mm / 50 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
26 – 10 26 – 10
32 A 30 A 30 A
500 V 300 V 300 V
6 kV
3
AP WT 4 D1/2 07.313.2955.0 10
TW WT 4 E 07.313.2855.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-10 Z7.261.2027.0 10
AP WT 4 D2/2 07.313.3155.0 10
TW WT 4 E 07.313.2855.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-10 Z7.261.2027.0 10
WT 4 D1/2 58.504.5055.0 100
WT 4 D1/2 BL 58.504.5055.6 100
WT 4 D2/2 58.504.5155.0 100
WT 4 D2/2 BLAU 58.504.5155.6 100
6 mm / 68 mm / 50 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
26 – 10 26 – 10
32 A 30 A 30 A
500 V 300 V 300 V
6 kV
3
WT 4 D1/2
WT 4 D2/2
AP WT 4 D1/2 07.313.2955.0 10
TW WT 4 E 07.313.2855.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-10 Z7.261.2027.0 10
20
selos
Knife edge disconnect block, gray
Knife edge disconnect block, blue
with 2 test bolts, gray
• Knife edge disconnect block for mounting
on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0,14 – 2,5 mm2
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Duo feed-through and knife edge disconnect block with screw connection
Duo feed-through block, gray
Duo feed-through block, blue
Duo feed-through block, gray
Duo feed-through block, blue
• Duo feed-through block with screw connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Max. electrical data: 41 A / 6 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
• Duo feed-through block with screw connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Max. electrical data: 41 A / 6 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
Accessories
Type Part No. Std. Pack
End plate
Partition
Cross connector 2 pole
5 pole
10 pole
Accessories
Type Part No. Std. Pack
End plate
Partition
Cross connector 2 pole
5 pole
10 pole
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
End plate
Partition
Cross connector 2 pole
5 pole
10 pole
6 mm / 68 mm / 50 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-2
26 – 10 26 – 10
500 V 300 V 300 V
6 kV
3
AP WT 4 D2/2 07.313.3155.0 10
WT 4 D2/2 PE 58.504.9155.0 100
WT 4 D2/2 PE
AP WT 4 D1/2 07.313.2955.0 100
WT 4 D1/2 PE 58.504.9355.0 100
6 mm / 56 mm / 50 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-2
26 – 10 26 – 10
500 V 300 V 300 V
6 kV
3
WT 4 D 1/2 PE
21
selos
Duo-ground block
• Duo-ground block with screw connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
Accessories
Type Part No. Std. Pack
End plate
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Duo-ground blocks with screw connection
Accessories
Type Part No. Std. Pack
End plate
Duo-ground block
• Duo-ground block with screw connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
5 mm / 66 mm / 64 mm
8 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
22 – 12 24 – 12
24 A 20/25 A 25 V
500 V 600 V 600 V
6 A
3
APN 2,5 E 07.312.1755.0 10
TWN 2,5 E 07.312.1855.0 10
IVB WK 2,5 - 2 Z7.280.2227.0 10
IVB WK 2,5 - 3 Z7.280.2327.0 10
IVB WK 2,5 - 12 Z7.280.3227.0 10
TS 2,5 GELB 07.311.2053.8 10
AD VB 2,5 GELB 04.326.2053.8 10
04.343.4756.8 10
WKN 2,5 E/U 57.403.7055.0 100
WKN 2,5 E/U/VB 57.403.6955.1 100
5 mm / 66 mm / 64 mm
8 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
22 – 12 24 – 12
24 A 20/25 A 25 A
500 V 600 V 600 V
6 A
3)
WKN 2,5 E / U
WKN 2,5 E / U / VB
22
selos
Multi-tier blocks with screw connection
Multi-tier block, gray
• Multi-tier block for mounting on TS 35 and TS 32
• Nominal cross section 2.5 mm2
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector with screws, 2 pole
insulated 3 pole
up to 12 pole
Partition plate with marking facility yellow
Single cover with marking facility yellow
Cover with warning symbol over 4 blocks
Multi-tier block, black
• Multi-tier block, vertically jumpered, with screw
connection for mounting on TS 35 and TS 32
• Nominal cross section 2.5 mm2
Accessories for selos WKN 2,5 E/U...
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
6 mm / 72 mm / 67 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
26 – 10 26 – 10
32 A 30 A 30 A
800 V 300 V 300 V
8 kV
3
WT 4 E 58.504.7055.0 100
WT 4 E BL 58.504.7055.6 100
WT 4 E VB 58.504.6955.1 100
6 mm / 72 mm / 67 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
26 – 10 26 – 10
32 A 30 A 30 A
800 V 300 V 300 V
8 kV
3
WT 4 E
WT 4 E VB
AP WT 4 E 07.313.3355.0 10
TW WT 4 E 07.313.2855.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-10 Z7.261.2027.0 10
AP WT 4 E 07.313.3355.0 10
TW WT 4 E 07.313.2855.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-10 Z7.261.2027.0 10
AP WT 4 E 07.313.3355.0 10
WT 4 E PE 58.504.9255.0 100
WT 4 E PE
6 mm / 72 mm / 67 mm
9 mm
EMD
IEC UL CSA ?
EN 60 947-7-2
26 – 10 26 – 10
800 V 300 V 300 V
8 kV
3
23
selos
Multi-tier block, gray
Multi-tier block, blue
• Multi-tier block for mounting on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
Multi-tier block, black
• Multi-tier block, vertically jumpered, with screw
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
End plate
Partition
Cross connector 2 pole
5 pole
10 pole
Accessories
Type Part No. Std. Pack
End plate
Partition
Cross connector 2 pole
5 pole
10 pole
Accessories
Type Part No. Std. Pack
End plate
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2pending
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Muli-tier ground block, green/yellow
Description Type Part No. Std. Pack
• Multi-tier ground block with screw connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
WT 4 E... 58.504.XX55.9 100
WT 4 E ...
6 mm / 72 mm / 67 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1/-2
26 – 10 26 – 10
AP WT 4 E 07.313.3355.0 10
400 V
1 A/1000 V
400 V
1 A/1000 V 1 A/400 V
U = 100-500 V
58.504.7355.9
24
selos
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 6 mm2
Cross section solid/stranded 0.14 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Function block, orange
Description Type Part No. Std. Pack
• Function block with screw connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Connection capacity: 2 wires, equal size
0.14 – 2.5 mm2
Accessories
Type Part No. Std. Pack
End plate, gray
58.504.7255.9 LED red
58.504.8755.9 LED green
Examples of functions
The multi-tier block is available on request as a function block for a wide variety of switching tasks.
58.504.7455.9 LED red
58.504.8255.9
58.504.8155.9
with inverted diode
58.504.8355.9
58.504.8055.9
with inverted diode
58.504.7955.9
58.504.8855.9
with inverted diodes
Specialty function blocks with screw connection
24 V DC
R = 4,7 K
0,4 W
24 V DC
R = 4,7 K
0,4 W
TW 2,5 - 3 D/U 07.312.1255.0 50
WK 2,5 - 3 D/U 57.503.8855.0 50
WK 2,5 - 3 D/U-NGN 57.503.8955.0 50
WK 2,5 - 3 D/U-PGN 57.503.9055.0 50
6 mm / 79 mm / 69 mm
7 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
22 – 12 22 – 12
24 A 25 A 25 A
400 V* 300 V* 300 V*
6 kV
3
WK 2,5-3 D / U
WK 2,5 - 3 D/U-NGN
24 V
WK 2,5 - 3 D/U-PGN
24 V
TW 2,5 - 3 D/U 07.312.1255.0 50
WK 2,5 - 3 D SL 56.503.8355.0 50
WK 2,5 - 3 D SL-NGN 56.503.8455.0 50
WK 2,5 - 3 D SL-PGN 56.503.8555.0 50
6 mm / 79 mm / 69 mm
7 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
22 – 12 22 – 12
24 A 25 A 25 A
400 V* 300 V* 300 V*
6 kV
3
WK 2,5-3 D / SL
WK 2,5 - 3 D SL-PGN
24 V
WK 2,5 - 3 D SL-NGN
24 V
IVB WK/3D-02 Z7.270.0227.0 10
IVB WK/3D-03 Z7.270.0327.0 10
IVB WK/3D-12 Z7.270.1227.0 10
IVB WK 2,5-K-2 ROT Z7.267.0227.5 10
IVB WK 2,5-K-3 ROT Z7.267.0327.5 10
IVB WK 2,5-K-12 ROT Z7.267.1227.5 10
IVB WK 2,5-K-2 BLAU Z7.267.0227.6 10
IVB WK 2,5-K-3 BLAU Z7.267.0327.6 10
IVB WK 2,5-K-12 BLAU Z7.267.1227.6 10
25
selos
Three-tier- / Initiator blocks with screw connection
Accessories
Type Part No. Std. Pack
Partition, gray
Multi-tier block, gray
Multi-tier bl.,
LED (green) betw. signal and +
Multi-tier bl.,
LED (green) betw. signal and –
• Multi-tier block for mounting on TS 35 and TS 32
• Nominal cross section 2.5 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Partition, gray
Multi-tier block, gray
Multi-tier bl.,
LED (green) betw. signal and +
Multi-tier bl.,
LED (green) betw. signal and –
• Multi-tier block for mounting on TS 35
• Nominal cross section 2,5 mm2
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• The use of cross connectors (jumper combs), requires
partitions in order to maintain the air and creepage
distances.
* 24 Vy with LED
Accessories
Type Part No. Std. Pack
Cross connector with screws, 2 pole
insulated, for upper level 3 pole
up to 12 pole
Jumper comb, angled, 2 pole
insulated (red), for lower level 3 pole
up to 12 pole
Jumper comb, angled, 2 pole
insulated (blue), for lower level 3 pole
up to 12 pole
Accessories for selos WK 2,5-3 D/...
6 mm / 53 mm / 69 mm
7 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
DIN VDE 0611 T1
22 – 12 22 – 12
24 A 25 A 25 A
250 V* 300 V* 300 V*
4 kV
3
TW 2,5 - 4 K/U 07.312.0555.0 10
WK 2,5 - 4 KI/U 57.503.7855.0 100
WK 2,5 - 4 KI/U-NGN 57.503.7955.0 100
WK 2,5 - 4 KI/U-PGN 57.503.8055.0 100
WK 2,5-4 KI / U
WK 2,5 - 4 KI/U-NGN
24 V
WK 2,5 - 4 KI/U-PGN
24 V
6 mm / 64 mm / 69 mm
7 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
DIN VDE 0611 T1
22 – 12 22 – 12
24 A 25 A 25 A
250 V* 300 V* 300 V*
4 kV
3
TW 2,5 - 4 K/U 07.312.0555.0 10
WK 2,5 - 4 KI SL 56.503.7355.0 100
WK 2,5 - 4 KI SL-NGN 56.503.7455.0 100
WK 2,5 - 4 KI SL-PGN 56.503.7555.0 100
WK 2,5 - 4 KI SL-PRT 56.503.7655.0 100
WK 2,5-4 KI / SL
WK 2,5 - 4 KI SL-NGN
24 V
WK 2,5 - 4 KI SL-PGN
WK 2,5 - 4 KI SL-PRT
24 V
IVB WK/3D-02 Z7.270.0227.0 10
IVB WK/3D-03 Z7.270.0327.0 10
IVB WK/3D-12 Z7.270.1227.0 10
IVB WK 2,5-K-2 ROT Z7.267.0227.5 10
IVB WK 2,5-K-3 ROT Z7.267.0327.5 10
IVB WK 2,5-K-12 ROT Z7.267.1227.5 10
IVB WK 2,5-K-2 BLAU Z7.267.0227.6 10
IVB WK 2,5-K-3 BLAU Z7.267.0327.6 10
IVB WK 2,5-K-12 BLAU Z7.267.1227.6 10
26
selos
Initiator block, gray
Multi-tier bl., LED (green) betw. signal and +
Multi-tier bl., LED (green) betw. signal and –
• Initiator block with screw connection for mounting
on TS 35 and TS 32
• Nominal cross section 2.5 mm2
Accessories
Type Part No. Std. Pack
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Initiator block, gray
Multi-tier bl., LED (green) betw. signal and +
Multi-tier bl., LED (green) betw. signal and –
Multi-tier bl., LED (red) betw. signal and –
• Initiator block with screw connection for mounting
on TS 35
• Nominal cross section 2.5 mm2
Accessories
Type Part No. Std. Pack
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Initiator blocks with screw connection
• The use of cross connectors (jumper combs), requires
partitions in order to maintain the air and creepage
distances.
* 24 Vy with LED
Accessories
Type Part No. Std. Pack
Cross connector with screws, 2 pole
insulated, for upper level 3 pole
up to 12 pole
Jumper comb, angled, 2 pole
insulated (red), for lower level 3 pole
up to 12 pole
Jumper comb, angled, 2 pole
insulated (blue), for lower level 3 pole
up to 12 pole
Accessories for selos WK 2,5-4 KI/...
VB WK 2,5-2 Z7.280.0227.0 10
VB WK 2,5-3 Z7.280.0327.0 10
VB WK 2,5-6 Z7.280.0627.0 10
WK 2,5-4 KOI/U 57.503.7055.0 50
WK 2,5-4 KOI/U-NGN 57.503.7155.0 50
WK 2,5-4 KOI/U-PGN 57.503.7255.0 50
WK 2,5-4 KOI / U
WK 2,5-4 KOI / U-NGN
WK 2,5-4 KOI / U-PGN
5 mm / 92 mm / 45 mm
10 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
22 – 12 22 – 12
16 A 20/30 A 25 A
400 V 300 V 300 V
6 kV
3
5 mm / 92 mm / 45 mm
10 mm
EMD
IEC UL CSA ?
EN 60 947-7-1
22 – 12 22 – 12
16 A 20/30 A 25 A
24 DC 24 V 24 V
AP 2,5-4 KO 07.310.9355.0 50
TW 2,5-4 KO 07.310.9455.0 50
VB WK 2,5 KO-2 07.257.0227.0 100
VB WK 2,5 KO-3 07.257.0327.0 100
VB WK 2,5 KO-20 07.257.2027.0 50
TS 2,5 GELB 07.311.2053.8 10
AD VB 2,5 GELB 04.326.2053.8 10
AD VB 5/10 04.342.0556.0 10
9705 A/5/10 B + ROT 04.855.0253.5 25
9705 A/5/10 B - BLAU 04.855.0353.6 25
27
selos
NGN: Indicator: R = 2.2 K 0,35 W
Lamp color: green
Initiator blocks with screw connection
PGN: Indicator: R = 2.2 K 0,35 W
Lamp color: green
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current, feed-through
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current, feed-through
Rated voltage
Rated impulse voltage
Pollution degree
Initiator block, gray
Initiator block, gray
Initiator block, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
• Initiator block with screw connection
for mounting on TS 35 and TS 32
• Nominal cross section 2.5 mm2
• Initiator block with screw connection
for mounting on TS 35 and TS 32
• NGN: With LED (green) between signal and plus
PNG: Wit LED (green) between signal and minus
• Nominal cross section 2.5 mm2
Accessories
Type Part No. Std. Pack
Cross connector with screws, 2 pole
for signal feed through 3 pole
up to 6 pole
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector 2 pole
for voltage supply 3 pole
up to 20 pole
Partition plate with marking facility yellow
Single cover with marking facility yellow
Cover strip for cross connectors over 10 blocks
Tear-off marking strip, red, marked “+” red
Tear-off marking strip, blue, marked “-” blue
Accessories for selos WK 2,5-4 KOI/U...
selos
6 mm / 48 mm / 81 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 10 20 – 10
1) 10 A1)
800 V2) 300 V2) 250 V2)
8 kV
3
6 mm / 48 mm / 81 mm
8 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 10 20 – 10
1) 10 A1)
800 V2) 300 V2) 250 V2)
8 kV
3
WK 4 TKG/U
57.504.4055.0 100
THSI 5x20
Z1.298.1053.0 10
THSI 5x20 LED24
Z1.298.1153.0 10
THSI 5x20 LED60
Z1.298.1253.0 10
THSI 5x20 GL250
Z1.298.1353.0 10
WK 4 TKG/U
57.504.4055.0 100
THSI 6,3x32
Z1.298.1653.0 10
THSI 6,3x32 LED24
Z1.298.1753.0 10
THSI 6,3x32 LED60
Z1.298.1853.0 10
THSI 6,3x32 GL250
Z1.298.1953.0 10
28
Fuse blocks with screw connection
Disconnect base block, gray
Fuse disconnect lever, gray
Fuse disconnect lever with LED 12 - 24 V2)
Fuse disconnect lever with LED 24 - 60 V2)
Fuse disconnect lever with GL 110 - 250 V2)
Disconnect base block, gray
Fuse disconnect lever, gray
Fuse disconnect lever with LED 12 - 24 V2)
Fuse disconnect lever with LED 24 - 60 V2)
Fuse disconnect lever with GL 110 - 250 V2)
• Disconnect base block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 4 mm2
• Disconnect base block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section
4 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current 6.3 A1)
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Width disconnect lever THSI 6.3x32 use end plate 07.311.6155.0 to maintain pitch
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current 6.3 A1)
Rated voltage
Rated impulse voltage
Pollution degree
1) When selecting G fuse inserts, make sure that the specifi ed maximum power
loss is not exceeded. The current is determined by the inserted fuse.
Maximum power loss at 23° C ambient temperature
(according to DIN EN 60947-7-3)
2) The voltage range is determined by the built-in LED display.
Depending on the application and the installation method, the possibility of
increased temperature must be checked in the closed fuse holders.
Higher ambient temperatures mean additional stress for the fuse inserts.
Therefore, the reduction of the rated current must be considered accordingly in
these applications.
Indicator (24 V): Lamp color: red
Power consumption: 10.3 mA
Indicator (220 V): Lamp color: red
Power consumption: 0.3 mA
Type
Rated
Voltage
Overload protection Exclusive short-
circuit protection
Single
arrangement
Group
arrangement
Single
arrangement
Group
arrangement
THSI 5 x 20
THSI 6,3 x 32
250 V
500 V
1.6 W
2.5 W
1.6 W
1.6 W
4.0 W
4.0 W
2.5 W
4.0 W
SIST 250 V 1.6 W 1.6 W 2.5 W 1.6 W
WK 4 TKG... with THSi 5 x 20
WK 4 TKG... with THSi 6,3 x 32
selos
6 mm / 48 mm / 68 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 10 20 – 10
1) 10 A
800 V2) 300 V 250 V
8 kV
3
6 mm / 48 mm / 68 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1 , EN 60 127-6
22 – 10 20 – 10
10 A
800 V2) 300 V 250 V
8 kV
3
WK 4 TKG/U
57.504.4055.0 100
Si ST
Z1.299.4055.0 10
Si ST LED
Z1.299.4155.0 10
Si ST GL
Z1.299.4255.0 10
WK 4 TKG/U
57.504.4055.0 100
DIST ...
Z1.299.3055.0 10
DIST-1 N 4007-13)
Z1.299.3155.0 10
DIST-1 N 4007-24)
Z1.299.3355.0 10
DIST-D
Z1.299.3255.0 10
WK 4 TKG... SIST
WK 4 TKG... DIST
AP 4 TK 07.311.6155.0 10
TW 4 TK 07.311.8155.0 10
IVB 1 WK 4..-2 Z7.255.4227.0 10
IVB 1 WK 4..-3 Z7.255.4327.0 10
IVB 1 WK 4..-6 Z7.255.4627.0 10
29
The current carrying load depends on the component used.
Temporary peak voltage 1000 V.
Pole assignment Anode Cathode3)
of the diode: Cathode Anode4)
Disconnect base block, gray
Fuse holder for 5 x 20 fuse
Fuse holder with LED 24-60 V
Fuse holder with GL 220 V
Disconnect base block, gray
Diode plug - without contacts
Diode plug - diode Imax = 1 A
Diode plug - diode Imax = 1 A
Diode plug with jumper Imax = 10 A
• Disconnect base block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 4 mm2
• Disconnect base block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current 6.3 A1)
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current 6.3 A1)
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Jumper comb, insulated 2 pole
3 pole
up to 6 pole
Accessories for selos WK 4 TKG... with THSi..., SIST and ...DIST
selos
6 mm / 48 mm / 49 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1 , EN 60 127-6
22 – 10 22 – 10
20 A 20 A 20 A
800 V 600 V 600 V
8 kV
32)
WK 4/TKM/U
57.504.2055.0 100
WK 4/TKM/U BLAU
57.504.2055.6 100
WK 4/TKM/P3/U
57.504.2355.0 100
WK 4 / TKM
12 mm / 48 mm / 49 mm
9 mm
ED
IEC UL CSA
EN 60 947-7-1 , EN 60 127-6
20 – 10
10 A
800 V 250 V
8 kV
3
WK 4/Si-D/U 5 x 25
57.504.1655.0 50
WK 4/Si-D/U 5 x 20
57.504.1755.0 50
WK 4 / Si-D / U 5 x 25
30
Fuse- and knife edge disconnect blocks with screw connection
Knife edge disconnect block, gray
Knife edge disconnect block, blue
with 2 test bolts, gray
• Knife edge disconnect block with screw
connection for mounting on TS 35 and TS 32
• Nominal cross section 4 mm2
* Version with test bolt: CSA: 300 V
EN 60 947-7-1 – 690 V / 6 kV / 3
Test bolt can be loaded with 1 A
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Fuse block, gray
w. G-screw cap B DIN 41674, 5 x 25 mm
w. G-SG-screw cap A DIN 41674, 5 x 20 mm
• Fuse block with screw connection for mounting on
TS 35 and TS 32
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current 6.3 A
Rated voltage
Rated impulse voltage
Pollution degree
selos
6 mm / 48 mm / 49 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 10 20 – 10
32 A 25 A 20 A
800 V 300 V 600 V
8 kV
3
6 mm / 48 mm / 78 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1 , EN 60 127-6
22 – 10 22 – 10
20 A 10 A 20 A
800 V 300 V 600 V
8 kV
32)
WK 4 TKS D/U
57.504.4455.0 100
WK 4 TKG-TRST/U
57.504.4555.0 100
WK 4 TKG-TRST P3/U
57.504.4855.0 100
WK 4 TKS D / U
WK 4 TKG-TRST / U
AP 4 TK 07.311.6155.0 10
TW 4 TK 07.311.8155.0 10
IVB 1 WK 4..-2 Z7.255.4227.0 10
IVB 1 WK 4..-3 Z7.255.4327.0 10
IVB 1 WK 4..-6 Z7.255.4627.0 10
31
Feed-through block, gray
Invertible plug disconnect block, gray
with 2 test bolts, gray
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 4 mm2
• Same dimensions as types WK 4 TKG / U
and types WK 4 / TKM/U
• Invertible plug disconnect block with screw
connection for mounting on TS 35 and 42
• Nominal cross section 4 mm2
* Version with test bolt: CSA: 300 V
EN 60 947-7-1 – 690 V / 6 kV / 3
Test bolt can be loaded with 1 A
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Jumper comb, insulated 2 pole
3 pole
up to 6 pole
Accessories for selos WK 4...
selos
8 mm / 77 mm / 54 mm
8 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 10 22 – 10
15 A
800 V2) 600 V2) 600 V2)
8 kV
3
10 mm / 77 mm / 54 mm
8 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 10 22 – 10
10 A1) 15 A 10 A
800 V2) 600 V2) 600 V2)
8 kV
3
WK 4/THSi 5 ... U
57.904.5355.0 50
WK 4/THSi 5 LED 12 U
57.904.5455.0 50
WK 4/THSi 5 LED 24 U
57.904.5555.0 50
WK 4/THSi 5 LED 60 U
57.904.5655.0 50
WK 4/THSi 5 GL 250 U
57.904.5755.0 50
WK 4/THSi 5 GL 500 U
57.904.5855.0 50
WK 4/THSi 6,3 ... U
57.904.5355.0 50
WK 4/THSi 6,3 LED 12 U
57.904.6455.0 50
WK 4/THSi 6,3 LED 24 U
57.904.6555.0 50
WK 4/THSi 6,3 LED 60 U
57.904.6655.0 50
WK 4/THSi 6,3 GL 250 U
57.904.6755.0 50
WK 4/THSi 6,3 GL 500 U
57.904.6855.0 50
WK 4 THSI 5... / U
WK 4 THSI 6,3... / U
AP 10/Si
07.311.4155.0 10
VB WK 10/Si-2
Z7.287.0227.0 10
VB WK 10/Si-3
Z7.287.0327.0 10
VB WK 10/Si-6
Z7.287.0627.0 10
04.312.2056.0 100
32
Fuse blocks with screw connection
The fuse blocks of this type have a fl ip top disconnect lever. It accepts miniature fuses
of 5 x 20, 5 x 25 and 5 x 30 mm (terminal width: 8 mm) or 6.3 x 32 mm (terminal width:
10 mm). The hinged lever has latch points both in the open and in the closed position,
and can be sealed.
All terminal blocks are available in two different versions, i.e. with or without red LEDs
functioning as indicators.
1) When selecting G fuse inserts, make sure that the specifi ed maximum power loss is
not exceeded. The current is determined by the inserted fuse.
2) The voltage range is determined by the built-in LED display.
Depending on the application and the installation method, the circumstances for
increased temperature must be checked in the closed fuse holders. Higher ambient
temperatures are an additional load for the fuse inserts. Therefore, the reduction of the
rated current must be considered accordingly in these applications.
Type
Rated
voltage
Overload protection Exclusive short-
circuit protection
Single
arrangement
Group
arrangement
Single
arrangement
Group
arrangement
THSI
5x20/25
THSI
6,3x32
THSI
5x30
250 V
500 V
500 V
1.6 W
2.5 W
1.6 W
1.6 W
2.5 W
1.6 W
4.0 W
4.0 W
4.0 W
2.5 W
2.5 W
2.5 W
Type Overload protection Exclusive short-
circuit protection
Single
arrangement
Group
arrangement
Single
arrangement
Group
arrangement
WK 10 Si U 5x20
WK 10 Si U 6.3x32
WK 10 Si U 5x25
WK 10 Si U 5x30
4.0 W/6.3 A
4.0 W/10 A
4.0 W/6.3 A
4.0 W/6.3 A
2.5 W/6.3 A
2.5 W/2.5 A
2.5 W/6.3 A
2.5 W/6.3 A
4.0 W/6.3 A
4.0 W/10 A
4.0 W/6.3 A
4.0 W/6.3 A
4.0 W/6.3 A
2.5 W/2.5 A
4.0 W/6.3 A
4.0 W/6.3 A
Fuse block,
gray
– with LED 5 - 12 V~/s
current consumed.
2.3 - 7 mA
– with LED 12 - 24 V~/s current con. 2.8 - 6,2 mA
– with LED 24 - 60 V~/s current con. 1.5 - 4 mA
– with GL 110 - 250 V~/s current con. 0.13 - 0.55 mA
– with GL 380 - 500 V~/s current con. 0.2 - 0.3 mA
Fuse block,
gray
– with LED 5 - 12 V~/s
current consumed.
2.3 - 7 mA
– with LED 12 - 24 V~/s current con. 2.8 - 6.2 mA
– with LED 24 - 60 V~/s current con. 1.5 - 4 mA
– with GL 110 - 250 V~/s current con. 0.13 - 0.55 mA
– with GL 380 - 500 V~/s current con. 0.2 - 0.3 mA
• Integrated lever-action fuse block with screw
connection for mounting on TS 35 and TS 32
• Nominal cross section 4 mm2
• For 5 mm miniature fuses
• The standard block has a storage location for a
replacement fuse.
• Integrated lever-action fuse block with screw
connection for mounting on TS 35 and TS32
• Nominal cross section 4 mm2
• For 6.3 mm miniature fuses
• The standard block has a storage location for a
replacement fuse.
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0,5 – 4 mm2
Cross section solid/stranded 0,5 – 6 mm2
Cross section, AWG
Rated current 6.3 A1) 6.3 A
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0,5 – 4 mm2
Cross section solid/stranded 0,5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Cross connector with screws 2 pole
3 pole
up to 6 pole
Transparent block cover (for 1 block)
Info for selos WK 4 THSI...
Accessories and info for selos WK 10/SI...
1) Maximum power loss at 23° C ambient temperature (according to DIN EN 60947-7-3) 1) Maximum power loss at 23° C ambient temperature (according to DIN EN 60947-7-3)
selos
12 mm / 65 mm / 58 mm
13 mm
ETMD
IEC UL CSA
EN 60 947-7-1
22 – 6 16 – 6
57 A 50 A 65 A
500 V 600 V 600 V
6 kV
3
12 mm / 65 mm / 58 mm
13 mm
EJTMD
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 6 16 – 6
max. 10 A 1) 15 A max. 15 A
500 V* 600 V* 600 V*
* 57.910.5055.0 250 V~ 600 V 600 V
* 57.910.5155.0 250 V~ 600 V 600 V
* 57.910.5255.0 500 V~ 600 V 600 V
* 57.910.5355.0 500 V~ 600 V 600 V
6 kV
3
12 mm / 65 mm / 58 mm
13 mm
ED
IEC UL CSA
EN 60 947-7-1, EN 60 127-6
22 – 6 16 – 6
max. 10 A 1) 15 A max. 15 A
500 V* 600 V* 600 V*
* 57.910.5455.0 110 - 250 V~ 150 V 500 V
* 57.910.5855.0 28 V~ 28 V 28 V
* 57.910.5755.0 110 - 500 V~ 150 V 500 V
* 57.910.6155.0 28 V~ 28 V 28 V
6 kV
3
WK 10/Si U D
57.910.4955.0 50
WK 10/Si U 5 x 20
57.910.5055.0 50
WK 10/Si U 5 x 25
57.910.5155.0 50
WK 10/Si U 5 x 30
57.910.5255.0 50
WK 10/Si U 6,3 x 32
57.910.5355.0 50
WK 10/Si U 5 x 20M, NGL
57.910.5455.0 50
WK 10/Si U 5 x 20M, GLB
57.910.5855.0 50
WK 10/Si U 6,3 x 32M, NGL
57.910.5755.0 50
WK 10/Si U 6,3 x 32M, GLB
57.910.6155.0 50
WK 10 /SI U D
WK 10 / SI ... / U
33
Feed-through block,
gray
Fuse block,
gray, with screw cap
– A DIN 41674 for G-fuses DIN 41571
– B DIN 41674 for G-fuses DIN 41576
– A DIN 41674 for G-fuses
– with screw cap for G-fuses
Fuse block,
gray, with screw cap
– A DIN 41674 for G-fuses DIN 41571
– B DIN 41674 for G-fuses DIN 41576
– A DIN 41674 for G-fuses
– with screw cap for G-fuses
• Feed-through block with screw connection for
mounting on TS 35
• Nominal cross section 10 mm2
• Same dimensions as fuse block
• Fuse block with screw cap for mounting on TS 35
• Nominal cross section 10 mm2
* Voltage and current are determined by the
built-in LED and the inserted G-fuse.
• Fuse block with screw cap for mounting on TS 35
and TS 32
• Nominal cross section 10 mm2
• With indicator
* Voltage and current are determined by the built-in
indicator and the inserted G-fuse.
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.0 – 10 mm2
Cross section solid/stranded 1.0 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.0 – 10 mm2
Cross section solid/stranded 1.0 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Indicator – Current consumed
red – 0.16 - 0.8 mA
yellow – 24 mA
red – 0.16 - 0.8 mA
yellow – 24 mA
Rated impulse voltage
Pollution degree
WK 10 / SI ... / U with indicator
5 mm / 61 mm / 51 mm
9 mm
MD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
12 A 15 A 15 A
250 V 300 V 300 V
4 kV
3
5 mm / 44 mm / 51 mm
9 mm
MD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
12 A 15 A 15 A
250 V 300 V 300 V
4 kV
3
5 mm / 44 mm / 48 mm
9 mm
MD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
12 A 20 A 15 A
250 V 300 V 300 V
4 kV
3
WK 2,5 U/D/8113 S/V... 57.503.2155.0 50
WK 2,5 U/D/8113 S/V/VK 57.503.2555.6 50
WK 2,5
U/D/8113 S/V/LED 25
57.503.2255.0 50
WK 2,5
U/D/8113 S/V/LED 50
57.503.2355.0 50
WK 2,5 U/8113 S/V...
57.503.2655.0 50
WK 2,5 U/8113 S/V/VK
57.503.3055.6 50
WK 2,5 U/8113 S/V/LED 25
57.503.2755.0 50
WK 2,5 U/8113 S/V/LED 50
57.503.2855.0 50
WK 2,5 U/8113 S/H
57.503.2055.0 100
WK 2,5 U / D / 8113 S / V
WK 2,5 U / 8113 S / V
WK 2,5 U / D / 8113 S / H
selos PLUG
AP 2,5 U/D/8113 S/V
07.311.9055.0 10
ZP 2,5 U/D/8113 S/V
07.311.9155.0 10
AD VB 5/10 P
04.342.3556.8 10
05.561.0053.0 100
AP 2,5 U/8113 S/V
07.312.1555.0 10
ZP 2,5 U/8113 S/V
07.312.1655.0 10
05.561.0053.0 100
AP 2,5 U/8113 S/H
07.311.9855.0 10
05.584.0053.0 100
05.576.5853.0 25
34
Feed-through blocks with wiecon pluggable connection
for PC board terminal type 8113 B, type 8313 B, type 8113 B / VL, type 8113 B / VR, type 8113 B / Top
Accessories
Type Part No. Std. Pack
End plate, gray
Spacer* 2.5 mm thick
Cover strip for LED, transparent 10 pole
Coding strip
* for wiecon PC board connector with 7.5 mm pitch
Accessories
Type Part No. Std. Pack
End plate, gray
Spacer* 2.5 mm thick
Coding strip
* for wiecon PC board connector with 7.5 mm pitch
Accessories
Type Part No. Std. Pack
End plate, gray
Coding strip
Locking piece 10 pole
Feed-through block, gray
Power block, blue
Feed-through block, with LED 25 V, gray
Feed-through block, with LED 50 V, gray
Feed-through block, gray
Power block, blue
Feed-through block, with LED 25 V, gray
Feed-through block, with LED 50 V, gray
Feed-through block, gray
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 2,5 mm2
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 2,5 mm2
• Feed-through block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 2,5 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2,5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2,5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2,5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
NMD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
12 A 15 A 15 A
250 V 300 V 300 V
400 V
NMD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
12 A 15 A 15 A
250 V 300 V 300 V
400 V
8113 B/2 OB
25.320.3253.0 100
8113 B/16 OB
25.320.4653.0 50
8113 B/2
25.320.0253.0 100
8113 B/16
25.320.1653.0 50
8313 B/2 OB
25.360.3253.0 100
8313 B/12 OB
25.360.4253.0 50
8313 B/2
25.360.0253.0 100
8313 B/12
25.360.1253.0 50
8113 B/2 VR OB
25.325.3253.0 100
8113 B/16 VR OB
25.325.4653.0 50
8113 B/2
25.325.0253.0 100
8113 B/16
25.325.1653.0 50
selos PLUG
05.561.9153.0
05.561.9153.0 100
VB WK 2,5-2
Z7.280.2227.0 10
IVB WK 2,5-3
Z7.280.2327.0 10
IVB WK 2,5-12
Z7.280.3227.0 10
TS 2,5 GELB
07.311.2053.8 10
AD VB 2,5 GELB
04.326.2053.8 10
04.343.9056.8 10
04.343.9156.8 10
05.561.4115.0 1
35
Accessories
Type Part No. Std. Pack
Coding strip 100
Accessories
Type Part No. Std. Pack
Coding strip
Spacing 5.00 mm, Rated voltage 250 V
unmarked, starting at 2
up to 16
marked with 1- x, starting at 2
up to 16
Spacing 7.50 mm, Rated voltage 400 V
unmarked, starting at 2
up to 12
marked with 1- x, starting at 2
up to 12
Spacing 5.00 mm, Rated voltage 250 V
unmarked, starting at 2
up to 16
marked with 1- x, starting at 2
up to 16
• Mating orientation parallel to wire entry
• For additional pluggable blocks, see wiecon
product family
• Mating orientation
90° towards the wire
• For additional pluggable blocks, see wiecon
product family
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Type 8113 B / ..., 8313 B / ...
Type 8113 B /... VR
Accessories
Type Part No. Std. Pack
Cross connector with screws, 2 pole
insulated 3 pole
12 pole
Partition plate with marking facility yellow
Single cover with marking facility yellow
Cover strip for PCB terminal 24 pole
with warning symbol 24 pole
Connection rail
L = 0,4 m
for connection to power block (blue) and indicator
Accessories for selos WK 2,5 U/...
6 mm / 67 mm / 40 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 61 210
22 – 12 22 – 12
20 A 10 A 10 A
800 V1) 300 V1) 300 V1)
8 kV
3
6 mm / 72 mm / 40 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 61 210
22 – 12 22 – 12
20 A 10 A 10 A
690 V1) 300 V1) 300 V1)
8 kV
3
6 mm / 67 mm / 50 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 61 210
22 – 12 22 – 12
20 A 10 A 10 A
800 V1) 600 V1) 300 V1)
8 kV
3
WK/4-8 S/U
57.504.6255.0 100
WK/3-6 S KO/U
57.504.7355.0 100
WK/4-8 S/IW/U
57.504.6355.0 100
WK / 4-8 S / U
WK / 3-6 S KO / U
WK / 4-8 S / IW / U
AP 4 S
07.311.4255.0 10
9703/6-2
Z7.211.0227.0 50
9703/6-3
Z7.211.0327.0 50
9703/6-6
Z7.211.0627.0 50
9701 A/6 1 S KO TP 2
07.310.5855.0 10
2072/2
Z7.220.0227.0 50
2072/2
Z7.220.0227.0 50
2072/6
Z7.220.0627.0 50
AP 3 S/IW
07.311.4355.0 50
VB WK/...S/IW/U-2
Z7.281.3227.0 10
VB WK/...S/IW/U-3
Z7.281.3327.0 10
VB WK/...S/IW/U-6
Z7.281.3627.0 10
selos PLUG
36
Distribution blocks with screw / push-on connection
Accessories
Type Part No. Std. Pack
End plate, gray
Cross connector with screws 2 pole
3 pole
up to 6 pole
Accessories
Type Part No. Std. Pack
End plate, gray
Cross connector with screws 2 pole
3 pole
up to 6 pole
Accessories
Type Part No. Std. Pack
End plate, gray
Cross connector with screws 2 pole
3 pole
up to 6 pole
Feed-through block,
gray
Feed-through block,
gray
Feed-through block,
gray
• Feed-through block with push-on connection for
mounting on TS 35
• Push-on connectors 2.8 x 0.8 acc. to DIN 46247
Push-on connectors 6.3 x 0.8 acc. to DIN 46247
• Current carrying capability according to DIN 46249
Tab connector 2.8 10 A
6.3 20 A
• Feed-through block with push-on connection for
mounting on TS 35
• Nominal cross section 4,0 mm2
• Push-on connectors 2.8 x 0.8 acc. to DIN 46247
Push-on connectors 6.3 x 0.8 acc. to DIN 46247
• Current carrying capability according to DIN 46249
Tab connector 2.8 10 A
6.3 20 A
• Feed-through block with push-on connection for
mounting on TS 35
• Push-on connectors 2.8 x 0,8 acc. to DIN 46247
Push-on connectors 6.3 x 0.8 acc. to DIN 46247
• Current carrying capability according to DIN 46249
Tab connector 2.8 10 A
6.3 20 A
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
For use with insulating sleeves
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
6 mm / 52 mm / 48 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 61 210
22 – 12
20 A 10 A 10 A
800 V1) 300 V1) 300 V1)
8 kV
3
6 mm / 52 mm / 48 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1, EN 61 210
22 – 12 22 – 12
20 A 10 A 10 A
800 V1) 300 V1) 300 V1)
8 kV
3
WK/5-10 S/U
57.504.3655.0 100
WK 4 3-6 S 1 K/U
57.504.3755.0 100
WK / 5-10 S / U
WK 4 3-6 S 1 K/U
AP 5 S
07.311.4655.0 10
IVB WKI 4-2
Z7.271.4227.0 10
IVB WKI 4-3
Z7.271.4327.0 10
IVB WKI 4-12
Z7.271.5227.0 10
AP4 3 S 1 K
07.311.3855.0 10
IVB WK 4-2
Z7.281.1227.0 10
IVB WK 4-3
Z7.281.1327.0 10
IVB WK 4-12
Z7.281.2227.0 10
TS 4 GELB
07.311.2153.8 10
AD VB 4 GELB
04.326.2153.8 10
05.592.7553.0 2000
05.592.7653.0 2000
selos PLUG
37
Accessories
Type Part No. Std. Pack
End plate, gray
Cross connector with screws 2 pole
3 pole
up to 12 pole
Accessories
Type Part No. Std. Pack
End plate, gray
Cross connector with screws 2 pole
3 pole
up to 12 pole
Feed-through block,
gray
Feed-through block,
gray
• Feed-through block with push-on connection for
mounting on TS 35
• Push-on connectors 2.8 x 0.8 acc. to DIN 46247
Push-on connectors 6.3 x 0.8 acc. to DIN 46247
• Current carrying capability according to DIN 46249
Tab connector 2.8 10 A
6.3 20 A
• Feed-through block with push-on connection for
mounting on TS 35
• Nominal cross section 4 mm2
• Push-on connectors 2.8 x 0.8 acc. to DIN 46247
Push-on connectors 6.3 x 0.8 acc. to DIN 46247
• Current carrying capability according to DIN 46249
Tab connector 2.8 10 A
6.3 20 A
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Partition plate with marking facility yellow
Single cover with marking facility yellow
Insulating sleeve for tab connector
for H0. V-K 1.5 mm2 yellow
for H0. V-K 2.5 mm2 yellow
Accessories for selos WK/...
1) Rating for use with insulating sleeves
selos
12 mm / 52 mm / 58 mm
9 mm
IEC UL CSA
EN 60 947-7-1
22 – 14
24 A 6 A
800 V 300 V
8 kV
3
12 mm / 52 mm / 58 mm
9 mm
IEC UL CSA
EN 60 947-7-1
800 V
8 kV
3
9786 U/12
57.904.2055.0 50
9786 U/12 G4
57.904.2555.0 50
9786 U/12 OPK
57.904.2855.0 50
9786 U/TSK Cu-CuNi
57.904.7355.0 50
9786 U/TSK NiCr-CuNi
57.904.7055.0 50
9786 U/TSK Fe-CuNi
57.904.7155.0 50
9786 U/TSK NiCr-Ni
57.904.7255.0 50
9786 U/TSK E-Cu-A-Cu
57.904.7455.0 50
9785 U/10 Ω
57.904.0055.0 50
9785 U/20 Ω
57.904.0155.0 50
9785 U/50 Ω
57.904.0255.0 50
9785 U/100 Ω
57.904.0355.0 50
9785 U/200 Ω
57.904.0455.0 50
9785 U/500 Ω
57.904.0555.0 50
9785 U/1 kΩ
57.904.0655.0 50
9785 U/2 kΩ
57.904.0755.0 50
9785 U/5 kΩ
57.904.0855.0 50
9785 U/10 kΩ
57.904.0955.0 50
9785 U/20 kΩ
57.904.1055.0 50
9785 U/50 kΩ
57.904.1155.0 50
9785 U/10 Ω-SPT
57.904.3955.0 50
9785 U/20 Ω-SPT
57.904.4155.0 50
9785 U/50 Ω-SPT
57.904.4255.0 50
9785 U/100 Ω-SPT
57.904.4355.0 50
9785 U/200 Ω-SPT
57.904.4455.0 50
9785 U/500 Ω-SPT
57.904.4555.0 50
9785 U/1 kΩ-SPT
57.904.4655.0 50
9785 U/2 kΩ-SPT
57.904.4755.0 50
9785 U/5 kΩ-SPT
57.904.4855.0 50
9785 U/10 kΩ-SPT
57.904.4955.0 50
9785 U/20 kΩ-SPT
57.904.5055.0 50
9785 U/50 kΩ-SPT
57.904.5155.0 50
9786 U / 12
9786 U / TSK...
9785 U /... - SPT
12 mm / 49 mm / 58 mm
9 mm
EN 60 947-7-1
38
Function blocks with screw connection
Example:
Fe / constantan Fe / CuNi 44
fully enclosed design
Function block empty
with bridge rectifi er B380 C1500
with optocoupler CNY 17 / 3
Thermocouple terminal type T-Cu / CuNi 44
Thermocouple terminal type E-NiCr / CuNi 44
Thermocouple terminal type J-Fe / CuNi 44
Thermocouple terminal type K-NiCr / Ni
Thermocouple terminal type R-PtRh 13 / Pt
Compensating terminal
, gray 10 Ω
with potentiometer 20 Ω
50 Ω
100 Ω
200 Ω
510 Ω
1 kΩ
2 kΩ
5 kΩ
10 kΩ
20 kΩ
50 kΩ
Compensating terminal
, gray 10 Ω
with potentiometer as voltage divider 20 Ω
50 Ω
100 Ω
200 Ω
510 Ω
1 kΩ
2 kΩ
5 kΩ
10 kΩ
20 kΩ
50 kΩ
• Function block with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 2.5 mm2
• Thermocouple terminal with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 2,5 mm2
• Compensating terminal with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 2.5 mm2
Resistor range: 0.25 Ω up to 100 Ω
Resistor tolerance: ± 10%
Resistor range: 100 Ω up to 50 kΩ
Resistor tolerance ± 20%
Limite continuous resistance value:
0.75 W up to 70º C
Max. load: 100 mA
Temperature coeffi cient: 0 up to +500 ppm/º C
Max. operating voltage: 300 V
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 2.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 2.5 mm2
Rated voltage
Rated impulse voltage
Pollution degree
General/Technical data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 2.5 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
selos
17,5 mm / 71 mm / 52 mm
9 mm
IEC UL CSA
EN 60 947-7-1
18 – 8 18 – 8
30 A 25 A 25 A
24 – 48 V / 110 – 220 V 48 V / 220 V 48 V / 220 V
9760 U/8 TKE 48
57.110.1655.0 25
9760 U/8 TKE 220
57.110.1555.0 25
9786 U / 12
39
EN 60 204 part 1 / DIN VDE 0113 part 1 “Fitting
industrial machines with electrical equipment”
9.4.3.1. Ground faults.
Ground faults in any control circuits must
not result in unintentional startup, potentially
hazardous motions or shutdown of the
machine.
During normal operation the auxiliary circuit is
connected to the functional ground and the green
(24 - 48 V) or yellow (110 - 220 V) status display is
illuminated.
If a low resistance ground fault occurs, the line fuse
will blow.
Once the contact separator is open, you can replace
the fuse.
The illumination of the red lamp alone indicates an
ground fault.
After the fault had been rectifi ed, the green
(24 - 48 V) or yellow (110 - 220 V) display will also light
up. The contacts should now be moved to the “on”
position as a result of which the red lamp will go out.
The illumination of the yellow or green lamp and external
display indicates that the auxiliary circuit has been
reconnected to the functional ground.
a external status display lights up
b green status display lights up
c red ground-fault indicator lights up
Ground Disconnect terminal with Neon Lamp 110 - 220 Vù
Ground Disconnect terminal with LED 24 - 48 Vù
Ground fault
Ground fault
Normal operation
d external status display lights up
e green status display lights up
f red ground-fault indicator lights up
g yellow status display lights up
h yellow indicator light not fl ashing
Normal
operation
Ground disconnect 24 - 48 Vù with LED
110 - 220 Vù with indicator lamp
• Ground disconnect with screw connection for
mounting on TS 35 and TS 32
• Nominal cross section 6 mm2
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.0 – 10 mm2
Cross section solid/stranded 1.0 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
selos
4
3
2
5
3
3
3
4
1
2
40
Instrument isolating terminal with screw connection
Accessories
Pos.
Short circuit contact
open
Normal operation
Measured
value test
Current
transformer
short circuit
Relay test
Short circuit contact
open
Short circuit contact
closed
Short circuit contact
closed
Disconnect point
closed
Disconnect point
open
Disconnect point
closed
Disconnect point
open
Wieland Electric‘s selos WKN 6 TK block offers a simple and effective DIN rail
block solution for use in measuring circuits for current, voltage or energy. All
circuits in everyday practice can be neatly implemented with the instrument
isolating terminal and a few accessory parts. Only two blocks are needed for
simple transformer circuits.
The main focus during the development of this block was clear and simple
handling as well as universal application. All switching states of the block and the
converter circuit are clearly recognizable and the extensive accessory program
is easy to use.
The block and the accessories meet the requirements of protection against
accidental finger touch as per BGV A2.
Technical data as per EN 60947-7:
Rated cross section: 6 mm² Rated current: 57 A
Rated voltage: 400 V Connection capacity: 0.5 - 10 mm²
selos
8 mm / 73 mm / 58 mm
12 mm
IEC EA TS 50-18
EN 60 947-7-1
57 A 25 A
500 V 500 V
6 kV
3
8 mm / 73 mm / 58 mm
12 mm
IEC UL CSA
EN 60 947-7-1
57 A
500 V
6 kV
3
WKN6 TK SF 56.106.0755.0 50
WKN6 TK SFD 56.106.0855.0 50
WKN6 TK 56.106.0055.0 50
WKN6 TK D 56.106.0155.0 50
WKN 6 TK SF
WKN 6 TK
APN 6 TK 07.313.1755.0 10
TW 6 TK 07.312.0453.0 10
IVS WKN6 TK-2 Z7.282.7229.0 10
IVS WKN6 TK-3 Z7.282.7329.0 10
IVS WKN6 TK-4 Z7.282.7429.0 10
IVB WKN6 TK-2 Z7.282.6229.0 10
IVB WKN6 TK-3 Z7.282.6329.0 10
IVB WKN6 TK-4 Z7.282.6429.0 10
IVB WKN6 TK-5 Z7.282.6529.0 10
IVB WKN6 TK-6 Z7.282.6629.0 10
SBN 4 GRAU Z5.511.3553.0 10
SBN 4 VIOLETT Z5.511.3553.9 10
SBN 4 GRÜN Z5.511.3553.7 10
SBN 4 GELB Z5.511.3553.8 10
SBN 4 BLAU Z5.511.3553.6 10
SP WKN 6 TK 05.566.6855.9 50
IVK WKN 6TK-2 Z7.255.8227.0 10
IVK WKN 6TK-3 Z7.255.8327.0 10
IVK WKN 6TK-4 Z7.255.8427.0 10
IVK WKN 6TK-5 Z7.255.8527.0 10
IVK WKN 6TK-6 Z7.255.8627.0 10
41
Instrument isolating terminal
Feed-through block
Instrument isolating terminal
Feed-through block
• Instrument isolating terminal with spring support
for mounting on TS 35
• Nominal cross section 6 mm2
• Instrument isolating terminal for mounting
on TS 35
• Nominal cross section 6 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 6 mm2
Cross section solid/stranded 0.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 6 mm2
Cross section solid/stranded 0.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
1. End plate 2 mm
2. Partition
3. Sliding short-circuit slide, insulated 2 pole
3 pole
4 pole
4. Cross connector with screws, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
5. Test socket gray
violet
green
yellow
blue
6. Disconnect locking device
Jumper comb for WKN 6 TK 2 pole
3 pole
4 pole
5 pole
6 pole
Accessories for selos WKN 6 TK...
selos
4
4
4
2
1
2
4
4
3
5
42
Instrument isolating terminal with screw connection WK6 TK
(yellow)
(green)
(violet)
(gray)
(blue)
Accessories
Pos.
Wieland Electric‘s selos WK 6 TK block offers an optimal DIN rail block solution
for all types of measuring circuits of current, voltage or energy. All circuits
occurring during everyday practice can be implemented with the Instrument
isolating terminal and a few accessories.
Complete insulated selectable connecting links are available as standard,
as are insulated test sockets in all conventional signal colors. Two additional
jumpering facilities permit the installation of fixed cross connections (e.g.,
for internal distribution of the k point of converter circuits). Standard cross
connectors in a wide variety of numbers of pins are available for this purpose.
The jumpers are easy to disconnect so that you can skip over blocks.
Technical data as per EN 60947-7:
Rated cross section: 6 mm² Rated current: 32 A
Rated voltage: 400 V Connection capacity: 0.5 - 10 mm²
Short circuit contact
open
Normal operation
Measured
value test
Current
transformer
short circuit
Relay test
Short circuit contact
open
Short circuit contact
closed
Short circuit contact
closed
Disconnect point
closed
Disconnect point
open
Disconnect point
closed
Disconnect point
open
selos
WK6 TK P3/35
WK6 TK/35
TW 6 TK 07.312.0453.0 10
IVS WK6 TK-2 Z7.212.2227.0 50
IVS WK6 TK-3 Z7.212.2327.0 50
IVS WK6 TK-4 Z7.212.2427.0 50
IVB WK6 TK-2 Z7.212.1227.0 50
IVB WK6 TK-3 Z7.212.1327.0 50
IVB WK6 TK-4 Z7.212.1427.0 50
IVB WK6 TK-5 Z7.212.1527.0 50
IVB WK6 TK-10 Z7.212.2027.0 50
SB 4 GRAU 05.511.2953.0 10
SB 4 VIOLETT 05.511.2953.9 10
SB 4 GRÜN 05.511.2953.7 10
SB 4 GELB 05.511.2953.8 10
SB 4 BLAU 05.511.2953.6 10
SP WK6 TK 05.563.5453.0 50
8 mm / 87 mm / 49 mm
12 mm
MD
IEC UL CSA
EN 60 947-7-1
20 – 8 20 – 8
32 A 45 A 45 A
400 V 600 V 300 V
6 kV
3
WK6 TK/35 56.106.0553.0 50
8 mm / 87 mm / 62 mm
12 mm
MD
IEC UL CSA
EN 60 947-7-1
20 – 8 20 – 8
32 A 45 A 45 A
400 V 600 V 300 V
6 kV
3
WK6 TK P3/35 56.106.0653.0 50
43
• Instrument isolating terminal with mounted test
sockets for mounting on TS 35
• Nominal cross section 6 mm2
• Instrument isolating terminal for mounting
on TS 35
• Nominal cross section 6 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
1. Partition
2. Sliding short-circuit slide, insulated 2 pole
3 pole
4 pole
3. Cross connector with screws, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
4. Test socket gray
violet
green
yellow
blue
5. Disconnect locking device
Accessories for selos WK6 TK.../35
Instrument isolating terminal
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
For use with insulating sleeves
Cross section fi ne-stranded 0.5 – 6 mm2
Cross section solid/stranded 0.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Instrument isolating terminal
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
For use with insulating sleeves
Cross section fi ne-stranded 0.5 – 6 mm2
Cross section solid/stranded 0.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
selos
10 mm / 55 mm / 64 mm
13 mm
IEC EA TS 50-18
EN 60 947-7-1
57 A 30 A
800 V 500 V
8 kV
3
8 mm / 54 mm / 57 mm
11 mm
IEC EA TS 50-18
EN 60 947-7-1
41 A 30 A
800 V 500 V
8 kV
3
WKN 10 SF 57.510.0555.0 100
WKN 6 SF 57.506.0555.0 100
WKN 10 SF
WKN 6 SF
APN 6 SF 07.313.2355.0 10
TW 6 TK 07.312.0453.0 10
IVB WK 6 - 2 Z7.282.2227.0 10
IVB WK 6 - 3 Z7.282.2327.0 10
IVB WK 6 - 12 Z7.282.3227.0 10
AD VB 6 GELB 04.326.2253.8 10
AD VB 8/4 GELB 04.343.4956.8 10
APN 10 SF 07.313.2455.0 10
TW 6 TK 07.312.0453.0 10
IVB WK 10 - 2 Z7.283.2227.0 10
IVB WK 10 - 3 Z7.283.2327.0 10
IVB WK 10 - 12 Z7.283.3227.0 10
AD VB 10 GELB 04.326.2353.8 10
AD VB 10/4 GELB 04.343.5056.8 10
44
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Cross connector with screws 2 pole
insulated 3 pole
up to 12 pole
Single cover f. cross conn. with marking facility
Cover with warning symbol yellow
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Cross connector with screws 2 pole
insulated 3 pole
up to 12 pole
Single cover f. cross conn. with marking facility
Cover with warning symbol yellow
Feed-through block,
gray
Feed-through block,
gray
• Feed-through block with spring support for
mounting on TS 35 and TS 32
• Nominal cross section 10 mm2
• Feed-through block with spring support for
mounting on TS 35 and TS 32
• Nominal cross section 6 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 2.5 – 10 mm2
Cross section solid/stranded 1.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 6 mm²
Cross section solid/stranded 0.5 – 10 mm²
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Screw type terminal blocks with spring support
selos
11 mm / 86 mm / 51 mm
10 mm
a
IEC UL CSA
EN 60 947-7-1
22 – 8 22 – 8
41 A 35 A 35 A
1000 V 600 V 600 V
8 kV
3
11 mm / 49 mm / 51 mm
10 mm
a
IEC UL CSA
EN 60 947-7-1
22 – 8 22 – 8
41 A 50 A 50 A
1000 V 600 V 600 V
8 kV
3
WRT 6 TK 57.106.1055.0 100
WRT 6 57.106.1155.0 100
WRT 6 TK
WRT 6
APRT 6 07.300.6955.0 10
TW 6 TK 07.312.0453.0 10
IVB WRT 6 TK - 2 Z7.250.5227.0 10
IVB WRT 6 TK - 3 Z7.250.5327.0 10
IVB WRT 6 TK - 4 Z7.250.5427.0 10
APRT 6 07.300.6955.0 10
TW 6 TK 07.312.0453.0 10
IVB WRT 6 TK - 2 Z7.250.5227.0 10
IVB WRT 6 TK - 3 Z7.250.5327.0 10
IVB WRT 6 TK - 4 Z7.250.5427.0 10
45
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Cross connector, insulated 2 pole
3 pole
4 pole
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Cross connector, insulated 2 pole
3 pole
4 pole
Instrument isolating terminal,
gray
Feed-through block,
gray
• Instrument isolating terminal with ring lug
connection for mounting on TS 35
• Nominal cross section 6 mm2
• Feed-through block with ring lug connection
for mounting on TS 35
• Nominal cross section 6 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.5 – 6 mm2
Cross section solid/stranded 1.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.5 – 6 mm2
Cross section solid/stranded 1.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
DIN rail terminal blocks with ring lug connection
selos POWER LINE
46
High current terminal blocks with screw connection
•
Up to 240 mm² rated cross section
• Cable connection via ring lug connection technology,
direct connection with rising cage or hybrid solutions
• Current carrying and cross connectors made of E-Cu
• Screws maintain torque via clamping body design,
as well as lock washers
• For the connection of cable lugs in versions
from M 6 to M 12
• Screws maintain torque via lock washers
• Approved for international rail transportation standards
• Covers for provision of protection against accidental touch
• Cross connectors made of E-Cu; 2, 3 and 4-pole
• Partition plates for visual and electrical separation
• All components can be marked with the standard Wieland
marking system
• When tightening the block screws, we recommend
countering by holding the wire to avoid deformation
of the mounting rail and to keep the foot of the block
free of torsional forces.
High current blocks,
type RFK
Lug ring connection
blocks
Accessories for
selos POWER
Mounting notice
selos POWER LINE is designed for use in mechanical and plant engineering,
railway, and battery applications.
Wieland offers a program which was especially developed for high current
applications. The portfolio includes feed through blocks and ring lug terminals.
The RFK type feed through blocks include four different cross sections between
95 and 240 mm² with different types of connection (e.g., rising cage or ring lug
connection).
Ring lug terminals augment the selos POWER LINE product line. Blocks with
ring lug sizes from M 6 to M 12 are available for the connection of wires with
crimped cable lugs.
Extensive accessories optimize the selos POWER LINE for a wide variety of
applications.
Technical data as per EN 60947-7:
Rated cross section: 95 mm² - 240 mm2 Rated current: up to 415 A
Rated voltage: 1000 V
selos POWER LINE
XMD
IEC UL CSA
1000 V
8 kV
31)
BK M 6/35 32.530.0053.0 25
BK M 8/35 32.540.0053.0 25
BK M 10/35 32.550.0053.0 25
BK M 12/35 32.560.0053.0 25
BK M .../35
TW BK M 6/35 07.340.3553.0 25
TW BK M 8/35 07.340.3653.0 25
TW BK M 10-12/35 07.340.3753.0 25
TW BK M 10-12/35 07.340.3753.0 25
VB BK M 6/35-2 07.205.5227.0 20
VB BK M 6/35-3 07.205.5327.0 10
VB BK M 8/35-2 07.205.7227.0 20
VB BK M 8/35-3 07.205.7327.0 10
VB BK M 10/35-2 07.205.8227.0 20
VB BK M 10/35-3 07.205.8327.0 10
VB BK M 12/35-2 07.205.9227.0 20
VB BK M 12/35-3 07.205.9327.0 10
AD BK M 6-8/35 04.304.0181.0 1
AD BK M 6-8/35 04.304.0181.0 1
AD BK M 10-12/35 04.304.0281.0 1
AD BK M 10-12/35 04.304.0281.0 1
05.564.0753.0 10
BK M 6 19 mm 56 mm 125 A
BK M 8 24 mm 65 mm 150 A
BK M 10 35 mm 72 mm 265 A
BK M 12 35 mm 74 mm 265 A
47
Type Width Height Rated current
Detailed drawing data on request.
Accessories
Type Part No. Std. Pack
Partition for BK M 6
for BK M 8
for BK M 10
for BK M 12
Cross connector for tab connection blocks,
from E-Cu for 2 blocks BK M 6
for 3 blocks BK M 6
for 2 blocks BK M 8
for 3 blocks BK M 8
for 2 blocks BK M 10
for 3 blocks BK M 10
for 2 blocks BK M 12
for 3 blocks BK M 12
Cover for BK M 6
for BK M 8
for BK M 10
for BK M 12
Installation clip for cover
Ring lug terminal
• Ring lug terminal for mounting on TS 35
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) with partition TW BK
selos POWER LINE
27 mm
EJTMD
IEC UL CSA
EN 60 947-7-1
70 – 150 mm2
70 – 150 mm2
0 - 300 MCM 0 - 300 MCM
335 A 275 A 300 A
1000 V 600 V 600 V
8 kV
3
27 mm
EJTMD
IEC UL CSA
EN 60 947-7-1
16 – 95 mm2
16 – 95 mm2
6 - 3 / 0 6 - 3 / 0
250 A 200 A 200 A
1000 V 600 V 600 V
8 kV
3
RFK 1/150 F S35 56.397.0055.0 10
RFK 1/150 K S35 56.397.0155.0 10
RFK 1/150 FK S35 56.397.0255.0 10
RFK 1/150 FMK S35 56.397.1255.0 10
RFK 1/95 F S 35 56.395.0055.0 10
RFK 1/95 K S 35 56.395.0155.0 10
RFK 1/95 FK S 35 56.395.0255.0 10
RFK 1/95 FM S 35 56.395.1055.0 10
RFK 1/95 FMK S 35 56.395.1255.0 10
RFK 1 / 150... S35
RFK 1 / 95... S35
Z7.409.5753.0 10
TE/RFK 1/95 07.340.0353.0 50
VB RFK 1/95/2/32 07.205.1227.0 20
VB RFK 1/95/3/32 07.205.1327.0 10
VB RFK 1/95/4/32 07.205.1427.0 10
Z7.409.5853.0 10
TE/RFK 1/150 - 240 PA 07.340.1053.0 50
VB RFK 1/185/2 07.201.4227.0 10
VB RFK 1/185/3 07.201.4327.0 10
VB RFK 1/185/4 07.201.4427.0 10
48
High current blocks with screw connection
Accessories
Type Part No. Std. Pack
Cover for RFK 1 /..., yellow
Partition / end plate 2.8 mm thick
Cross connector, for 2 blocks
from E-Cu for 3 blocks
for 4 blocks
Accessories
Type Part No. Std. Pack
Cover for RFK 1 /..., yellow
Partition / end plate 2.8 mm thick
Cross connector, for 2 blocks
from E-Cu for 3 blocks
for 4 blocks
Confi guration, gray F
K
FK
FMK
Confi guration, gray F
K
FK
FM
FMK
• High current block for mounting on TS 35
• Nominal cross section 150 mm2
• High current block for mounting on TS 35
• Nominal cross section 95 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5 see list
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5 see list
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
selos POWER LINE
F
K
FK
FM
FMK
mm2
95
F M 10 32 92 55
FM M 10 32 92 65
K, FK, FMK M 10 32 92 78
150 F M 12 42 92 55
K, FK, FMK M 12 42 92 78
185 F M 12 42 92 55
FM M 12 42 92 70
240
F M 12 42 92 55
FM M 12 42 92 77
K, FK, FMK M 12 42 92 93
27 mm
EJTMD
IEC UL CSA
EN 60 947-7-1
70 – 240 mm2
70 – 240 mm2
0 - 500 kcmil 3/0 - 500 kcmil
415 A 375 A 425 A
1000 V 600 V 600 V
8 kV
3
27 mm
EJTMD
IEC UL CSA
EN 60 947-7-1
0 - 400 kcmil 0 - 400 kcmil
353 A 375 A 375 A
1000 V 600 V 600 V
8 kV
3
RFK 1/240 F S 35*)56.399.0055.0 10
RFK 1/240 K S 35 56.399.0155.0 10
RFK 1/240 FK S 35*)56.399.0255.0 10
RFK 1/240 FM S 35*)56.399.1055.0 10
RFK 1/240 FMK S 35*)56.399.1255.0 10
RFK 1/185 F S 35 56.398.0055.0 10
RFK 1/185 FM S 35 56.398.1055.0 10
RFK 1 / 240... S35
RFK 1 / 185... S35
Z7.409.5853.0 10
TE/RFK 1/150 - 240 PA 07.340.1053.0 50
VB RFK 1/185/2 07.201.4227.0 10
VB RFK 1/185/3 07.201.4327.0 10
VB RFK 1/185/4 07.201.4427.0 10
Z7.409.5853.0 10
TE/RFK 1/150 - 240 PA 07.340.1053.0 50
VB RFK 1/240/2 07.201.8227.0 10
VB RFK 1/240/3 07.201.8327.0 10
VB RFK 1/240/4 07.201.8427.0 10
49
Accessories
Type Part No. Std. Pack
Cover for RFK 1 /..., yellow
Partition / end plate 2.8 mm thick
Cross connector, for 2 blocks
from E-Cu for 3 blocks
for 4 blocks
Accessories
Type Part No. Std. Pack
Cover for RFK 1 /..., yellow
Partition / end plate 2.8 mm thick
Cross connector, for 2 blocks
from E-Cu for 3 blocks
for 4 blocks
Confi guration, gray F
K
FK
FM
FMK
Confi guration, gray F
FM
• High current block for mounting on TS 35
• Nominal cross section 240 mm2
*) Use only cable lugs type DIN 46234
• High current block for mounting on TS 35
• Nominal cross section 185 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5 see list
Wire strip length
Approvals
Technical data
For use with insulating sleeves
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5 see list
Wire strip length
Approvals
Technical data
For use with insulating sleeves
Cross section fi ne-stranded
Cross section solid/stranded
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Confi gurations
Type Screw Width Length Height, incl. TS 7,5
mm mm mm
selos MINI
WKM 2,5 / 15
WKM 4 / 15
WKM 4 SL / 15
APM 2,5 - 4/15 07.311.0853.0 10
APM 2,5 - 4/15 BLAU 07.311.0853.6 10
TWM 2,5 - 4/15 07.311.1853.0 10
VB WKM 2,5/15-2 Z7.215.4227.0 50
VB WKM 2,5/15-3 Z7.215.4327.0 50
VB WKM 2,5/15-6 Z7.215.4627.0 50
VB WKM 2,5/15 M60 Z7.215.4027.0 10
AD VB 2,5/15 GELB 04.326.3053.8 10
TSM 2,5/15 07.311.2853.8 10
APM 2,5 - 4/15 07.311.0853.0 10
APM 2,5 - 4/15 BLAU 07.311.0853.6 10
TWM 2,5 - 4/15 07.311.1853.0 10
IVB WK 4 E/U-2 Z7.271.2227.0 10
IVB WK 4 E/U-3 Z7.271.2327.0 10
IVB WK 4 E/U-12 Z7.271.3227.0 10
AD VB 4/15 GELB 04.326.2953.8 10
TSM 4/15 07.311.2953.8 10
APM 4 SL/15 07.311.0753.0 10
5 mm / 32 mm / 32 mm
9 mm
NG8TMnD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 14 24 – 12
25 A 10 A 25 A 20 A
500 V 300 V 600 V 275 V
6 kV
3
6 mm / 32 mm / 32 mm
9 mm
E8TMnD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 10 20 – 10
28 A 30 A 37 A 21/27 A2)
500 V 600 V 600 V 275 V
6 kV
3
6 mm / 32 mm / 32 mm
9 mm
E8TMnD9 KEMA 02 ATEX 2114 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 14 22 – 10
30 A
500 V 300 V
6 kV
3
WKM 2,5/15 55.503.1053.0 100
WKM 2,5/15 BLAU 55.503.1053.6 100
WKM 4/15 55.504.1053.0 100
WKM 4/15 BLAU 55.504.1053.6 100
WKM 4 SL/15 55.504.9153.0 100
50
Mini blocks with screw connection for TS 15
Accessories
Type Part No. Std. Pack
End plate gray
blue
Partition gray
Cross connector with screws, 2 pole
E-Cu 3 pole
up to 6 pole
60 pole
Single cover f. cross conn. with marking facility
Partition plate with marking facility
Accessories
Type Part No. Std. Pack
End plate gray
blue
Partition gray
Cross connector with screws, 2 pole
E-Cu 3 pole
up to 12 pole
Single cover f. cross conn. with marking facility
Partition plate with marking facility
Accessories
Type Part No. Std. Pack
End plate
• Feed-through block for mounting on TS 15
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Feed-through block for mounting on TS 15
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
2) with/without jumper
• Ground block for mounting on TS 15
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm20.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm20.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm20.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm20.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm20.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm20.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Ground block, green/yellow
selos MINI
WKM 2,5 F1 / 15
WKM 2,5 F2 / 15
APM 2,5 F./15 07.311.0653.0 10
VB WKM 2,5/15-2 Z7.215.4227.0 50
VB WKM 2,5/15-3 Z7.215.4327.0 50
VB WKM 2,5/15-6 Z7.215.4627.0 50
VB WKM 2,5/15 M60 Z7.215.4027.0 10
AD VB 2,5/15 GELB 04.326.3053.8 10
TSM 2,5/15 07.311.2853.8 10
APM 2,5 F./15 07.311.0653.0 10
VB WKM 2,5/15-2 Z7.215.4227.0 50
VB WKM 2,5/15-3 Z7.215.4327.0 50
VB WKM 2,5/15-6 Z7.215.4627.0 50
VB WKM 2,5/15 M60 Z7.215.4027.0 10
AD VB 2,5/15 GELB 04.326.3053.8 10
TSM 2,5/15 07.311.2853.8 10
5 mm / 32 mm / 32 mm
9 mm
G
IEC UL CSA ?
EN 60 947-7-1
24 A
500 V
6 kV
3
5 mm / 32 mm / 32 mm
9 mm
IEC UL CSA ?
EN 60 947-7-1
24 A
500 V
6 kV
3
WKM 2,5 F1/15 55.503.1253.0 100
WKM 2,5 F2/15 55.503.1353.0 100
51
Accessories
Type Part No. Std. Pack
End plate gray
Cross connector with screws, 2 pole
E-Cu 3 pole
up to 6 pole
60 pole
Single cover f. cross conn. with marking facility
Partition plate with marking facility yellow
Accessories
Type Part No. Std. Pack
End plate gray
Cross connector with screws, 2 pole
E-Cu 3 pole
up to 6 pole
60 pole
Single cover f. cross conn. with marking facility
Partition plate with marking facility yellow
• Feed-through block with solder connection for
mounting on TS 15
• Nominal cross section 2.5 mm2
• The terminal blocks of series WKM 2,5 F1 / 15 and
WKM 2,5 F2 / 15 must be mounted alternately in
order to maintain the required air and creepage
distances for the indicated rated voltage.
• Feed-through block solder connection for
mounting on TS 15
• Nominal cross section 2.5 mm2
• The terminal blocks of series WKM 2,5 F1 / 15 and
WKM 2,5 F2 / 15 must be mounted alternately in
order to maintain the required air and creepage
distances for the indicated rated voltage.
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Feed-through block, gray
Feed-through block, gray
selos CLASSIC LINE
52
DIN rail terminal blocks with screw connection, type 9700 A.. S35
•
Steel free clamping body
– Increased corrosion resistance
– Extruded clamping body, nickel-plated brass
• Low contact resistance
– Clamping body has similar physical and chemical
characteristics as the conductor
– One piece clamping body/current bar
The following always applies when connecting
aluminium wires in the selos CLASSIC LINE:
• After being stripped, the ends of the wires must be
cleaned with a brush and then coated with acid-free
grease to prevent further oxidation.
• The terminal should be tightened to approx. 20 %
higher torque than what is stated for the clamping
screw.
With this type of terminal, it is not necessary to retighten
the clamping screws.
• Connection range 0.5 – 50 mm2
Solid, fine-stranded and stranded wires can be
connected to the terminal blocks of selos CLASSIC LINE
without ferrules, as all block sizes have wire protection.
High-quality screw
connection technology
Connection of
aluminum wires
possible
Wide connection
range
• Save space on the rail
– selos CLASSIC LINE offers higher density due to the wire
size and terminal block pitch:
Connection range Pitch
2,5 mm2 5 mm
4 mm2 6 mm
10 mm2 8 mm
16 mm2 10 mm
25 mm2 12 mm
35 mm2 16 mm
Compact design
DIN rail terminal blocks with screw
connection – selos CLASSIC
The selos CLASSIC series offers the highest-quality
connecting technology. Thanks to its unique clamping
body design, aluminum or copper wire connections are
long lasting and maintenance-free.
The product line includes feed-through and ground
blocks for wires up to 50 mm2.
selos CLASSIC LINE
5 mm / 47 mm / 38 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1
18 – 12 22 – 12
24 A 20/30 A 25 A
800 V 600 V 600 V
8 kV
3
6 mm / 47 mm / 38 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-1
18 – 10 22 – 10
32 A 30/30 A 35 A
800 V 600 V 600 V
8 kV
3
9700 A/5 S35 54.003.7553.0 100
9700 A/5 S35 BLAU 54.003.7553.6 100
9700 A/6 S35 54.004.7553.0 100
9700 A/6 S35 BLAU 54.004.7553.6 100
9700 A/5 S35
9700 A/6 S35
9701/6 07.310.3153.0 10
9702/6 07.310.3453.0 10
9703/5-2 Z7.215.0227.0 50
9703/5-3 Z7.215.0327.0 50
9703/5-4 Z7.215.0427.0 50
9703/5-5 Z7.215.0527.0 50
9703/5-6 Z7.215.0627.0 50
9703/5-M Z7.215.0027.0 10
Z7.269.3523.0 50
9011 D 05.508.8921.0 10
04.325.1656.0 10
9701/6 07.310.3153.0 10
9702/6 07.310.3453.0 10
9703/6-2 Z7.211.0227.0 50
9703/6-3 Z7.211.0327.0 50
9703/6-4 Z7.211.0427.0 50
9703/6-5 Z7.211.0527.0 50
9703/6-6 Z7.211.0627.0 50
9703/6-M Z7.211.0027.0 10
Z7.269.2923.0 50
9011 C 05.508.8821.0 10
04.325.1056.0 10
53
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Cross connector with screws, 2 pole
E-Cu, uninsulated 3 pole
4 pole
5 pole
6 pole
Cut-to-order strip 0,6 m long
2-pole switchable jumper
Adapter for test plug
Cover with warn. symbol for 1 block yellow
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Cross connector with screws, 2 pole
E-Cu, uninsulated 3 pole
4 pole
5 pole
6 pole
Cut-to-order strip 0,6 m long
2-pole switchable jumper
Adapter for test plug
Cover with warn. symbol for 1 block yellow
Feed-through block,
gray
Feed-through block, (Ex)i, blue
Feed-through block,
gray
Feed-through block, (Ex)i, blue
• Feed-through block for mounting on TS 35
• Nominal cross section 2.5 mm2
• Feed-through block for mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Ratings for use of insulating sleeves
Cross section fi ne-stranded 0.5 – 2.5 mm2
Cross section solid/stranded 0.5 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Ratings for use of insulating sleeves
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Feed-through blocks with screw connection, type 9700 A.. S35
selos CLASSIC LINE
8 mm / 47 mm / 48 mm
12 mm
EMD
IEC UL CSA
EN 60 947-7-1
18 – 8 18 – 8
57 A 50/50 A 55 A
800 V 600 V 600 V
8 kV
3
10 mm / 49 mm / 51 mm
15 mm
EMD
IEC UL CSA
EN 60 947-7-1
18 – 6 18 – 6
76 A 65/70 A 70 A
800 V 600 V 600 V
8 kV
3
9700 A/8 S 35 54.010.7553.0 100
9700 A/8 S 35 BLAU 54.010.7553.6 100
9700 A/10 S 35 54.016.7553.0 100
9700 A/10 S 35 BLAU 54.016.7553.6 100
9700 A/8 S35
9700 A/10 S35
9701/8 07.310.3253.0 10
9702/8 07.310.3553.0 10
9703/8-2 Z7.212.0227.0 50
9703/8-3 Z7.212.0327.0 50
9703/8-4 Z7.212.0427.0 50
9703/8-5 Z7.212.0527.0 50
9703/8-6 Z7.212.0627.0 50
Z7.269.3023.0 50
9011 B 05.508.3221.0 10
04.325.1156.0 10
05.593.5953.0 10
9701/10 07.310.3953.0 10
9702/10 07.310.4053.0 10
9703/10-2 Z7.214.0227.0 50
9703/10-3 Z7.214.0327.0 50
9703/10-4 Z7.214.0427.0 50
9703/10-5 Z7.214.0527.0 50
9703/10-6 Z7.214.0627.0 50
Z7.269.3123.0 50
9011 A 05.508.3121.0 10
04.325.1256.0 10
54
Feed-through blocks with screw connection, type 9700 A.. S35
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector with screws, 2 pole
E-Cu, uninsulated 3 pole
4 pole
5 pole
6 pole
2-pole switchable jumper
Adapter for test plug
Cover with warn. symbol for 1 block yellow
Rapid mounting tool
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector with screws, 2 pole
E-Cu, uninsulated 3 pole
4 pole
5 pole
6 pole
2-pole switchable jumper
Adapter for test plug
Cover with warn. symbol for 1 block yellow
Feed-through block,
gray
Feed-through block, (Ex)i, blue
Feed-through block,
gray
Feed-through block, (Ex)i, blue
• Feed-through block for mounting on TS 35
• Nominal cross section 16 mm2
• Feed-through block for mounting on TS 35
• Nominal cross section 16 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1 – 10 mm2
Cross section solid/stranded 1 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.5 – 16 mm2
Cross section solid/stranded 1.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
selos CLASSIC LINE
12 mm / 59 mm / 58 mm
20 mm
EMD
IEC UL CSA
EN 60 947-7-1
14 –4 14 – 4
101 A 85/100 A 100 A
800 V 600 V 600 V
8 kV
3
16 mm / 59 mm / 58 mm
20 mm
EMD
IEC UL CSA
EN 60 947-7-1
6 – 2 12 – 2
125 A 115/130 A 125 A
800 V 600 V 600 V
8 kV
3
9700 A/12 S 35 54.025.7553.0 50
9700 A/12 S 35 BLAU 54.025.7553.6 50
9700 A/16 S 35 54.035.7553.0 50
9700 A/16 S 35 BLAU 54.035.7553.6 50
9700 A/12 S35
9700 A/16 S35
9701/12 07.310.3353.0 10
9702/12 07.310.3653.0 10
9703/12-2 Z7.213.0227.0 50
9703/12-3 Z7.213.0327.0 50
9703/12-4 Z7.213.0427.0 50
9703/12-5 Z7.213.0527.0 50
9703/12-6 Z7.213.0627.0 50
Z7.269.3223.0 50
05.508.6521.0 10
04.325.1356.0 10
9701/12 07.310.3353.0 10
9702/12 07.310.3653.0 10
9703/16-2 Z7.216.0227.0 50
9703/16-3 Z7.216.0327.0 50
9703/16-4 Z7.216.0427.0 50
9703/16-5 Z7.216.0527.0 50
9703/16-6 Z7.216.0627.0 50
Z7.269.3423.0 50
05.508.6521.0 10
04.325.1456.0 10
55
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector with screws, 2 pole
E-Cu, uninsulated 3 pole
4 pole
5 pole
6 pole
2-pole switchable jumper
Adapter for test plug
Cover with warn. symbol for 1 block yellow
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector with screws, 2 pole
E-Cu, uninsulated 3 pole
4 pole
5 pole
6 pole
2-pole switchable jumper
Adapter for test plug
Cover with warn. symbol for 1 block yellow
Feed-through block,
gray
Feed-through block, (Ex)i, blue
Feed-through block,
gray
Feed-through block, (Ex)i, blue
• Feed-through block for mounting on TS 35
• Nominal cross section 25 mm2
• Feed-through block for mounting on TS 35
• Nominal cross section 35 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 2.5 – 25 mm2
Cross section solid/stranded 2.5 – 35 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 2,5 – 35 mm2
Cross section solid/stranded 2,5 – 50 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
selos CLASSIC LINE
6 mm / 48 mm / 38 mm
9 mm
EMD
IEC UL CSA
EN 60 947-7-2
18 – 10 22 – 10
800 V 600 V 600 V
8 kV
3
8 mm / 53 mm / 48 mm
11 mm
EMD
IEC UL CSA
EN 60 947-7-2
18 – 8 18 – 8
800 V 600 V 600 V
8 kV
3
10 mm / 53 mm / 51 mm
16 mm
EMD
IEC UL CSA
EN 60 947-7-2
18 – 6 16 – 6
800 V 600 V 600 V
8 kV
3
9700 A/6 SL2 S35
9700 A/8 SL2 S35
9700 A/10 SL2 S35
9701/6 SL 07.312.0053.0 10
9701/8 SL 07.312.0153.0 10
9701/10 SL 07.312.0253.0 10
9700 A/6 SL 2 S 35 56.004.9053.0 100
9700 A/8 SL 2 S 35 56.010.9053.0 100
9700 A/10 SL 2 S 35 56.016.9053.0 50
56
Ground blocks with screw connection, Typ 9700 A.. S35
Accessories
Type Part No. Std. Pack
End plate, green
Accessories
Type Part No. Std. Pack
End plate, green
Accessories
Type Part No. Std. Pack
End plate, green
• Ground block for mounting on TS 35
• Nominal cross section 4 mm2
• Ground block for mounting on TS 35
• Nominal cross section 10 mm2
• Ground block for mounting on TS 35
• Nominal cross section 16 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 4 mm2
Cross section solid/stranded 0.5 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.5 – 10 mm2
Cross section solid/stranded 0.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 1.5 – 16 mm2
Cross section solid/stranded 1.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Ground block, green-yellow
Ground block, green-yellow
Ground block, green-yellow
selos CLASSIC LINE
16 mm / 53 mm / 58 mm
18 mm
EMD
IEC UL CSA
EN 60 947-7-2
12 – 2 12 – 2
800 V 600 V 600 V
8 kV
3
9700 A/16 SL2 S35
9701/16 SL 07.312.0353.0 10
9700 A/16 SL 2 S 35 56.035.9053.0 50
57
Accessories
Type Part No. Std. Pack
End plate, green
• Ground block for mounting on TS 35
• Nominal cross section 35 mm2
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 2.5 – 35 mm2
Cross section solid/stranded 2.5 – 50 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Ground block, green-yellow
58
fasis
fasis
59
fasis WKFN – DIN Rail Terminal Blocks
with Tension Spring Connection
The DIN rail terminal block with tension spring technology:
fasis WKFN is easy to operate, saves time and costs during
wiring and reduces inventory costs, and guarantees vibration-
proof and maintenance-free connections with high contact forces.
The product line includes feed-through and ground blocks
with 2, 3 or 4 termination point as well as multi-tier blocks
in two- and three-tier designs, knife-edge disconnect blocks in
one- and two-tier designs and fuse blocks. In addition, specialty
function blocks are available with application-specifi c diode
circuits.
fasis WKFN has been designed for use in machinery and plant
construction as well as hazardous locations subject to explosion.
Connection cross-sections up to 35 mm²
Rated current of up to 125 A
Rated voltage of up to 1000 V
60
fasis
DIN rail terminal blocks with tension spring connection
The system
• Compact design for wiring in confined
spaces (to 35 mm²)
• Plug-in system provides a Plug &
Play solution in the control cabinet –
fasis CON
• Plug-in jumper bars
• Screwless, snap-on ground terminal
• Function check via modular test adapter
through test point in the jumpering channel
• Integrated test jacks in all blocks
• Many labeling options
The terminals
• Secure and maintenance-free tension spring
connection
• High quality, dynamic contact technology
with steel spring and copper current carry-
ing bar
• Easy to wire front connection
• Connection of fine-stranded wires with and
without wire ferrules
• Simple operation with a standard
screwdriver
• Screwdriver is held securely in the terminal
for optimal handling while connecting wires
61
fasis
• Wire entry guide strips for secure connection
of wires smaller than 1 mm²
• Snap-on covers with warning symbols
• Wieland screwdriver for optimal operation of
spring tension terminals
The accessories
Marking strips – Dependable
• Maximum hold to the terminal
•
Solidify integrity of the assembly
Marking tags – Individual
• Individual labeling with minimum
effort
• Ideal for service and maintenance
Wieland marking system – Reliable identifi cation
Wieland jumpering system – Perfect technology
Extremely rugged!
• Indestructible steel spring
•
Vibration-proof connection
Simple customization
• Individual poles easy to remove
• Circuits easy to identify
Perfect technology
• Copper current bar guarantees low contact
resistance
• Steel spring guarantees strength, durability,
and long-term stability
Copper
Steel
4 mm / 49 mm / 37 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
26 – 14 26 – 14
15 A 15 A
500 V 300 V 300 V 440 V*)
6 kV
3
4 mm / 60 mm / 37 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
26 – 14 26 – 14
15 A 15 A
500 V 300 V 300 V 440 V*)
6 kV
3
4 mm / 72 mm / 37 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
26 – 14 26 – 14
15 A 15 A
500 V 300 V 300 V 440 V*)
6 kV
3
APF 1,5 07.312.8153.0 10
TWF 1,5 07.312.8253.0 10
APF 1,5 D1/2 07.312.8353.0 10
SAPF 1,5 07.312.8953.0 10
TWF 1,5 D1/2 07.312.8453.0 10
APF 1,5 D2/2 07.312.8553.0 10
SAPF 1,5 07.312.8953.0 10
TWF 1,5 D2/2 07.312.8653.0 10
WKF 1,5/35 56.702.0053.0 50
WKF 1,5/35 BLAU 56.702.0053.6 50
WKF 1,5 D1/2/35 56.702.5053.0 50
WKF 1,5 D1/2/35 BLAU 56.702.5053.6 50
WKF 1,5 D2/2/35 56.702.5153.0 50
WKF 1,5 D2/2/35 BLAU 56.702.5153.6 50
WKF 1,5/35
WKF 1,5 D1/2/35
WKF 1,5 D2/2/35
62
fasis
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
• Duo feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
• Duo feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Segment end plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Segment end plate, gray
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current 17.5 A 17.5/16.5 A3)
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current 17.5 A 17.5/16.5 A3)
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current 17.5 A 17.5/16.5 A3)
Rated voltage
Rated impulse voltage
Pollution degree
Feed-through blocks with tension spring connection
IVB WKF 1,5 – 2 Z7.268.0227.0 10
IVB WKF 1,5 – 3 Z7.268.0327.0 10
IVB WKF 1,5 – 4 Z7.268.0427.0 10
IVB WKF 1,5 – 5 Z7.268.0527.0 10
IVB WKF 1,5 – 10 Z7.268.1027.0 10
IVB WKF 1,5 – 20 Z7.268.2027.0 10
LEL 1,5/1 WEISS 05.564.4253.0 10
LEL 1,5/2 GRAU 05.564.4353.0 10
ADF 1,5/5 GELB 04.343.6953.8 10
DIN 5264 B 0,4x2,5 06.502.4300.0 5
63
fasis
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
20 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
Cover with warning symbol over 5 blocks
Screwdriver, uninsulated
Accessories for fasis WKF 1,5...
*) For maintaining the proper isolation distances, the open side of a feed-through terminal block as well as both sides of a
jumper are to be covered by partitions.
3) Rated current when using cross connectors
WKFN 2,5/35
WKFN 2,5 D1/2/35
WKFN 2,5 D2/2/35
5 mm / 47 mm / 38 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-1-1 EN 60 079-0/-7
22 – 12 24 – 12
24 A 20 A 24 A 22 A1)
800 V 600 V 600 V 550 V
8 kV
3
5 mm / 60 mm / 38 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-1-1 EN 60 079-0/-7
22 – 12 24 – 12
24 A 20 A 24 A 22 A1)
800 V 600 V 600 V 550 V
8 kV
3
5 mm / 72 mm / 38 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-1-1 EN 60 079-0/-7
22 – 12 24 – 12
24 A 20 A 24 A 22 A1)
800 V 600 V 600 V 550 V
8 kV
3
APFN 2,5 07.312.6755.0 10
APFN 2,5 BLAU 07.312.6755.6 10
TWFN 2,5 07.312.6855.0 10
APFN 2,5 D1/2 07.312.6955.0 10
APFN 2,5 D1/2 BLAU 07.312.6955.6 10
TWFN 2,5 D1/2 07.312.7055.0 10
APFN 2,5 D2/2 07.312.7155.0 10
APFN 2,5 D2/2 BLAU 07.312.7155.6 10
TWFN 2,5 D2/2 07.312.7255.0 10
WKFN 2,5/35 56.703.0055.0 100
WKFN 2,5/35 BLAU 56.703.0055.6 100
WKFN 2,5 D1/2/35 56.703.5055.0 100
WKFN 2,5 D1/2/35 BLAU 56.703.5055.6 100
WKFN 2,5 D2/2/35 56.703.5155.0 100
WKFN 2,5 D2/2/35 BLAU 56.703.5155.6 100
64
fasis
Feed-through blocks with tension spring connection
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) for 40 K and
45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) for 40 K and
45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) for 40 K and
45 K
WKF 16/35 PV/WKFN
12 mm / 82 mm / 48 mm
15 mm
EJMD8 KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 4 12 – 4
76 A 75 A 78 A 64 A*)
800 V 600 V 600 V 690 V
8 kV
3
WKF 16/35 PV/WKFN 56.716.0353.0 20
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 –20 Z7.280.8027.0 20
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
ADF 16/4 GELB 04.343.6653.8 10
DIN 5264 B 1,0x5,5 06.502.4200.0 5
48 68 72 76
65
fasis
Supply block
• Supply block for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Power feed-in block, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 4 – 16 mm24 – 16 mm2
Cross section solid/stranded 4 – 16 mm24 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Type-specifi c output currents upon request
Potential-
distribution
Jumpering one side both sides
single double single double
Imax
– Potential distribution with standard cross connector
IVB WKF 2.5...
– Parallel connection of two cross connectors –>
double jumpering
– Potential distributions are possible on one
or both sides
Imax = ∑ In ≤ ∑ INblock
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
20 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 2,5...
Accessories
Type Part No. Std. Pack
Cover with warning symbol over 4 blocks
Screwdriver, uninsulated
6 mm / 51 mm / 38 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 10 24 – 10
32 A 30 A 32 A 28/30 A1)
800 V 600 V 600 V 690 V
8 kV
3
6 mm / 67 mm / 38 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 10 24 – 10
32 A 30 A 32 A 28/30 A1)
800 V 600 V 600 V 550 V
8 kV
3
6 mm / 82 mm / 38 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 10 24 – 10
32 A 30 A 32 A 28/30 A1)
800 V 600 V 600 V 550 V
8 kV
3
APFN 4 07.312.9255.0 10
APFN 4 BLAU 07.312.9255.6 10
TWFN 4 07.312.9355.0 10
APFN 4 D1/2 07.312.9455.0 10
APFN 4 D1/2 BLAU 07.312.9455.6 10
TWFN 4 D1/2 07.312.9555.0 10
APFN 4 D2/2 07.312.9055.0 10
APFN 4 D2/2 BLAU 07.312.9055.6 10
TWFN 4 D2/2 07.312.9155.0 10
WKFN 4/35 56.704.0055.0 100
WKFN 4/35 BLAU 56.704.0055.6 100
WKFN 4 D1/2/35 56.704.5055.0 100
WKFN 4 D1/2/35 BLAU 56.704.5055.6 100
WKFN 4 D2/2/35 56.704.5155.0 100
WKFN 4 D2/2/35 BLAU 56.704.5155.6 100
WKFN 4/35
WKFN 4 D1/2/35
WKFN 4 D2/2/35
66
fasis
Feed-through blocks with tension spring connection
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K/
2. value at 45
K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K/
2. value at 45
K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K/
2. value at 45
K
WKF 16/35 PV/WKFN
12 mm / 82 mm / 48 mm
15 mm
EJMD8 KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 4 12 – 4
76 A 75 A 78 A 64 A*
800 V 600 V 600 V 690 V
8 kV
3
ADF 16/4 GELB 04.343.6653.8 10
DIN 5264 B 1,0x5,5 06.502.4200.0 5
WKF 16/35 PV/WKFN 56.716.0353.0 20
VB WKF 4 – 2 Z7.261.1227.0 10
IVB WKF 4 – 3 Z7.261.1327.0 10
IVB WKF 4 – 4 Z7.261.1427.0 10
IVB WKF 4 – 5 Z7.261.1527.0 10
IVB WKF 4 – 6 Z7.261.1627.0 10
IVB WKF 4 – 7 Z7.261.1727.0 20
IVB WKF 4 – 8 Z7.261.1827.0 20
IVB WKF 4 – 9 Z7.261.1927.0 20
IVB WKF 4 – 10 Z7.261.2027.0 20
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/3 SCHWARZ 05.561.8753.0 100
ADF 4/4 GELB 04.343.6153.8 10
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
64 76 76 76
67
fasis
• Supply block for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Power feed-in block, gray
Accessories
Type Part No. Std. Pack
Cover with warning symbol over 4 blocks
Screwdriver, uninsulated
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 4 – 16 mm24 – 16 mm2
Cross section solid/stranded 4 – 16 mm24 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Type-specifi c output currents upon request
Potential
distribution
Jumpering one side both sides
single double single double
Imax
– Potential distribution with standard cross connector
IVB WKF 4...
– Parallel connection of two cross connectors –>
double jumpering
– Potential distributions are possible on one
or both sides
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 4...
Imax = ∑ In ≤ ∑ INblock
8 mm / 66 mm / 45 mm
12 mm
NMD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 8 24 – 8
41 A 50 A 41 A 39/41 A*
800 V 600 V 600 V 550 V
8 kV
3
8 mm / 90 mm / 45 mm
12 mm
NMD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 8 24 – 8
41 A 50 A 41 A 39/41 A*
800 V 600 V 600 V 550 V
8 kV
3
APFN 6 07.313.0455.0 10
APFN 6 BLAU 07.313.0455.6 10
TWFN 6 07.313.0555.0 10
APFN 6 D1/2 07.313.0655.0 10
APFN 6 D1/2 BLAU 07.313.0655.6 10
TWFN 6 D1/2 07.313.0755.0 10
WKFN 6/35 56.706.0055.0 100
WKFN 6/35 BLAU 56.706.0055.6 100
WKFN 6 D1/2/35 56.706.5055.0 100
WKFN 6 D1/2/35 BLAU 56.706.5055.6 100
WKFN 6/35
WKFN 6 D1/2/35
IVB WKFN 6 – 2 Z7.282.5227.0 10
IVB WKFN 6 – 3 Z7.282.5327.0 10
IVB WKFN 6 – 4 Z7.282.5427.0 10
IVB WKFN 6 – 5 Z7.282.5527.0 10
ADF 6/4 GELB 04.343.6253.8 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,8x4 06.502.4100.0 5
68
fasis
Feed-through blocks with tension spring connection
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 6 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo-feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 6 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 6 mm20.2 – 6 mm2
Cross section solid/stranded 1.5 – 10 mm21.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * 1. value at 40 K/
2. value at 45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 6 mm20.2 – 6 mm2
Cross section solid/stranded 1.5 – 10 mm21.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * 1. value at 40 K/
2. value at 45 K
Accessories
Type Part No. Std. Pack
Cross connector, insulated** 2 pole
3 pole
4 pole
5 pole
Cover with warning symbol over 4 blocks yellow
Test plug
Screwdriver, uninsulated
** When cross connectors are used according to EN 60079-0 and EN 60079-7, the current must be reduced to max. 3.5 A.
Accessories for fasis WKFN 6...
10 mm / 72 mm / 50 mm
15 mm
NMD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
16 – 6 16 – 6
57 A 60 A 65 A 52/57 A*
800 V 600 V 600 V 550 V
8 kV
3
10 mm / 98 mm / 50 mm
15 mm
NMD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
16 – 6 16 – 6
57 A 60 A 65 A 52/57 A*
1000 V 600 V 600 V 550 V
8 kV
3
APFN 10 07.313.0855.0 10
APFN 10 BLAU 07.313.0855.6 10
TWFN 10 07.313.0955.0 10
APFN 10 D1/2 07.313.1055.0 10
APFN 10 D1/2 BLAU 07.313.1055.6 10
TWFN 10 D1/2 07.313.1155.0 10
WKFN 10/35 56.710.0055.0 50
WKFN 10/35 BLAU 56.710.0055.6 50
WKFN 10 D1/2/35 56.710.5055.0 50
WKFN 10 D1/2/35 BLAU 56.710.5055.6 50
WKFN 10/35
WKFN 10 D1/2/35
IVB WKF 10 – 2 Z7.283.8227.0 10
IVB WKFN 35R10 Z7.285.6427.0 10
ADF 10/4 GELB 04.343.6453.8 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 1x5,5 06.502.4200.0 5
69
fasis
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 10 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
3)
Pls. note that the current must be reduced for EX applications
.
• Duo-feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 10 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
3)
Pls. note that the current must be reduced for EX applications
.
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 10 mm20.2 – 10 mm2
Cross section solid/stranded 1.5 – 16 mm21.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * 1. value at 40 K/
2. value at 45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 10 mm20.2 – 10 mm2
Cross section solid/stranded 1.5 – 16 mm21.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * 1. value at 40 K/
2. value at 45 K
Accessories
Type Part No. Std. Pack
Cross connector, insulated** 2 pole
Reducing jumper, WKF 35 to WKFN 103)
Cover with warning symbol over 4 blocks yellow
Test plug
Screwdriver, uninsulated
** When cross connectors are used acc. to EN 60079-0 and EN 60079-7 the current must be reduced to 4 A/40 K or 5 A/45 K
for type WKFN 10/35.
Accessories for fasis WKFN 10...
12 mm / 79 mm / 50 mm
16 mm
NMD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
16 – 4 16 – 4
76 A 85 A 85 A 74/76 A*
1000 V 600 V 600 V 550 V
8 kV
3
12 mm / 107 mm / 50 mm
16 mm
NMD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
16 – 4 16 – 4
76 A 85 A 85 A 74/76 A*
1000 V 600 V 600 V 550 V
8 kV
3
APFN 16 07.313.1255.0 10
APFN 16 BLAU 07.313.1255.6 10
TWFN 16 07.313.1355.0 10
IVB WKF 16 – 2 Z7.284.4227.0 10
ADF 16/4 GELB 04.343.6653.8 10
APFN 16 D1/2 07.313.1455.0 10
APFN 16 D1/2 BLAU 07.313.1455.6 10
TWFN 16 D1/2 07.313.1555.0 10
IVB WKF 16 – 2 Z7.284.4227.0 10
ADF 16/4 GELB 04.343.6653.8 10
WKFN 16/35 56.716.0055.0 50
WKFN 16/35 BLAU 56.716.0055.6 100
WKFN 16 D1/2/35 56.716.5055.0 50
WKFN 16 D1/2/35 BLAU 56.716.5055.6 100
WKFN 16/35
WKFN 16 D1/2/35
16 mm / 100 mm / 59 mm
18 mm
8aD KEMA 03 ATEX 2057 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
12 – 2 12 – 2
125 A 115 A 115 A 92/108 A1)
800 V 600 V 600 V 690 V
8 kV
3
IVB WKF 35-2 Z7.285.6227.0 10
WKF 35/35 56.735.0053.0 10
WKF 35/35 BLAU 56.735.0053.6 10
WKF 35/35
70
fasis
Feed-through blocks with tension spring connection
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 16 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo-feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 16 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Feed-through block, gray
Feed-through block, blue
Feed-through block, gray
Feed-through block, blue
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Cross connector, insulated** 2 pole
Cover with warning symbol for 4 blocks
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Cross connector, insulated** 2 pole
Cover with warning symbol for 4 blocks
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 16 mm20.2 – 16 mm2
Cross section solid/stranded 1.5 – 25 mm21.5 – 25 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * 1. value at 40 K/
2. value at 45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 16 mm20.2 – 16 mm2
Cross section solid/stranded 1.5 – 25 mm21.5 – 25 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * 1. value at 40 K/
2. value at 45 K
Feed-through block, gray
Feed-through block, blue
• Feed-through block with tension spring
connection for mounting on TS 35
• Nominal cross section 35 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 2.5 – 35 mm22.5 – 35 mm2
Cross section solid/stranded 2.5 – 35 mm22.5 – 35 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note
1)
with/without jumper
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 1x5,5 06.502.4200.0 5
35-R-10 125 A 125 A 125 A 125 A
57 A 105 A 57 A 105 A
57 A 57 A 57 A 57 A
Potential supply with feed-through blocks up to 35 mm2
WKF 35 /35 56.735.0053.0 10
WKF 35 /35 BLAU 56.735.0053.6 10
IVB WKFN 35R10 Z7.285.6427.0 10
WKFN 10 /35 56.710.0055.0 10
WKFN 10 /35 BLAU 56.710.0055.6 10
WKFN 10 D1/2/35 56.710.5055.0 10
WKFN 10 D1/2/35 BLAU 56.710.5055.6 10
71
fasis
Accessories
Type Part No. Std. Pack
Test plug
Screwdriver, uninsulated
** When cross connectors are used according to EN 60079-0 and EN 60079-7, the current must be reduced to max. 3.5 A.
Accessories for fasis WKFN 16... and WKF 35
Imax E: Imax. supply
Imax R: Ireducing cross connector
IN-A: IN output terminal blocks
Potential distribution Distribution on one side Distribution on both sides
2 poles several poles 2 poles several poles
Imax.
supply
I
reducing cross connector
IN
output terminal blocks
Supply block, gray
Supply block, gray
Reducing cross connector2)
Output block, gray
Output block, blue
Output block, gray
Output block, blue
2) When cross connectors are used acc. to EN 60079-0 and EN 60079-7 the current must be reduced (values to be requested)
Function Type Part No. Std. Pack
Potential distribution 35 R 10
• Potential supply 35 mm2
• Reducing cross connector 35R10
• Potential output 10 mm2
4 mm / 49 mm / 37 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 14 24 – 14
500 V 300 V 300 V 440 V*
6 kV
3
4 mm / 60 mm / 37 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 14 24 – 14
500 V 300 V 300 V 440 V*
6 kV
3
4 mm / 72 mm / 37 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 14 24 – 14
500 V 300 V 300 V 440 V*
6 kV
3
APF 1,5 07.312.8153.0 10
TWF 1,5 07.312.8253.0 10
APF 1,5 D1/2 07.312.8353.0 10
SAPF 1,5 07.312.8953.0 10
TWF 1,5 D1/2 07.312.8453.0 10
APF 1,5 D2/2 07.312.8553.0 10
SAPF 1,5 07.312.8953.0 10
TWF 1,5 D2/2 07.312.8653.0 10
WKF 1,5 SL/35 56.702.9053.0 50
WKF 1,5 D1/2/SL/35 56.702.9353.0 50
WKF 1,5 D2/2/SL/35 56.702.9153.0 50
WKF 1,5 SL/35
WKF 1,5 D1/2/SL/35
WKF 1,5 D2/2/SL/35
LEL 1,5/1 WEISS 05.564.4253.0 100
LEL 1,5/2 GRAU 05.564.4353.0 100
ADF 1,5/5 GELB 04.343.6953.8 10
DIN 5264 B 0,4x2,5 06.502.4300.0 5
72
fasis
Ground blocks with tension spring connection
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
Ground block, green/yellow
Ground block, green/yellow
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Segment end plate
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Segment end plate
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
Cover with warning symbol over 5 blocks yellow
Screwdriver, uninsulated
* In order to maintain the proper isolation distances, the open side of a ground block is to be covered by an end plate.
Accessories for fasis WKF 1.5...
5 mm / 47 mm / 38 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 12 24 – 12
800 V 600 V 600 V
8 kV
3
5 mm / 60 mm / 38 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 12 24 – 12
800 V 600 V 600 V
8 kV
3
5 mm / 72 mm / 38 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 12 24 – 12
800 V 600 V 600 V
8 kV
3
APFN 2,5 07.312.6755.0 10
APFN 2,5 D1/2 07.312.6955.0 10
APFN 2,5 D2/2 07.312.7155.0 10
WKFN 2,5 SL/35 56.703.9055.0 100
WKFN 2,5 D1/2/SL/35 56.703.9355.0 100
WKFN 2,5 D2/2/SL/35 56.703.9155.0 100
WKFN 2,5 SL/35
WKFN 2,5 D1/2/SL/35
WKFN 2,5 D2/2/SL/35
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
73
fasis
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo-Ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
Ground block, green/yellow
Ground block, green/yellow
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 2,5...
6 mm / 51 mm / 38 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 10 24 – 10
800 V 600 V 600 V
8 kV
3
6 mm / 67 mm / 38 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 10 24 – 10
800 V 600 V 600 V
8 kV
3
6 mm / 82 mm / 38 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 10 24 – 10
800 V 600 V 600 V
8 kV
3
APFN 4 07.312.9255.0 10
APFN 4 D1/2 07.312.9455.0 10
APFN 4 D2/2 07.312.9055.0 10
WKFN 4 SL/35 56.704.9055.0 100
WKFN 4 D1/2/SL/35 56.704.9355.0 100
WKFN 4 D2/2/SL/35 56.704.9155.0 100
WKFN 4 SL/35
WKFN 4 D1/2/SL/35
WKFN 4 D2/2/SL/35
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/3 SCHWARZ 05.561.8753.0 100
ADF 4/4 GELB 04.343.6153.8 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
74
fasis
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
Ground block, green/yellow
Ground block, green/yellow
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 4...
Ground blocks with tension spring connection
8 mm / 66 mm / 45 mm
12 mm
NnD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 8 24 – 8
800 V 600 V 600 V
8 kV
3
8 mm / 90 mm / 45 mm
12 mm
NnD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 8 24 – 8
50 A
800 V 600 V 600 V
8 kV
3
APFN 6 07.313.0455.0 10
APFN 6 D1/2 07.313.0655.0 10
WKFN 6 SL/35 56.706.9055.0 100
WKFN 6 D1/2/SL/35 56.706.9355.0 100
WKFN 6 SL/35
WKFN 6 D1/2/SL/35
IVB WKFN 6 – 2 Z7.282.5227.0 10
IVB WKFN 6 – 3 Z7.282.5327.0 10
IVB WKFN 6 – 4 Z7.282.5427.0 10
IVB WKFN 6 – 5 Z7.282.5527.0 10
ADF 6/4 GELB 04.343.6253.8 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,8x4 06.502.4100.0 5
75
fasis
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 6 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 6 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
Ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 6 mm20.2 – 6 mm2
Cross section solid/stranded 1.5 – 10 mm21.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 6 mm20.2 – 6 mm2
Cross section solid/stranded 1.5 – 10 mm21.5 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
Cross connector, insulated* 2 pole
3 pole
4 pole
5 pole
Cover with warning symbol over 4 blocks yellow
Test plug
Screwdriver, uninsulated
* When cross connectors are used according to EN 60079-0 and EN 60079-7, the current must be reduced to max. 3.5 A.
Accessories for fasis WKFN 6...
10 mm / 98 mm / 50 mm
15 mm
NnD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
16 – 6
1000 V 600 V
8 kV
3
12 mm / 79 mm / 50 mm
16 mm
NnD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
16 – 4 16 – 4
1000 V 600 V 600 V
8 kV
3
APFN 10 D1/2 07.313.1055.0 10
APFN 16 07.313.1255.0 10
WKFN 10 D1/2/SL/35 56.710.9355.0 50
WKFN 16 SL/35 56.716.9055.0 50
WKFN 10 D1/2/SL/35
WKFN 16 SL/35
10 mm / 72 mm / 50 mm
15 mm
NnD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
16 – 6 16 – 6
1000 V 600 V 600 V
8 kV
3
WKFN 10 SL/35 56.710.9055.0 10
WKFN 10 SL/35 56.710.9055.0 50
WKFN 10 SL/35
76
fasis
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 10 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 16 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
Ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 10 mm20.2 – 10 mm2
Cross section solid/stranded 1.5 – 16 mm21.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 16 mm20.2 – 16 mm2
Cross section solid/stranded 1.5 – 25 mm21.5 – 25 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Ground blocks with tension spring connection
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 10 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 10 mm20.2 – 10 mm2
Cross section solid/stranded 1.5 – 16 mm21.5 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Description Type Part No. Std. Pack
16 mm / 100 mm / 59 mm
18 mm
8aD KEMA 03 ATEX 2057 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
12 – 2 12 – 2
800 V 600 V 600 V 690 V
8 kV
3
WKF 35 SL/35 56.735.9053.0 10
WKF 35 SL/35
IVB WKF 35 – 2 Z7.285.6227.0 10
ADF 35/5 GELB 04.343.9253.8 10
ST 2/2,3 Z5.553.2921.0 10
12 mm / 107 mm / 50 mm
16 mm
NnD PTB 06 ATEX 1075 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
16 – 4
1000 V 600 V
8 kV
3
APFN 16 D1/2 07.313.1455. 10
WKFN 16 D1/2/SL/35 56.716.9355.0 50
WKFN 16 D1/2/SL/35
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 1x5,5 06.502.4200.0 5
IVB WKF 10 – 2 Z7.283.8227.0 10
ADF 10/4 GELB 04.343.6453.8 10
IVB WKF 16 – 2 Z7.284.4227.0 10
ADF 16/4 GELB 04.343.6653.8 10
77
fasis
Ground block, green/yellow
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 35 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 2.5 – 35 mm22.5 – 35 mm2
Cross section solid/stranded 2.5 – 35 mm22.5 – 35 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
Cover with warning symbol over 4 blocks
Test plug
• Duo ground block with tension spring connection
for mounting on TS 35
• Nominal cross section 16 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.2 – 16 mm20.2 – 16 mm2
Cross section solid/stranded 1.5 – 25 mm21.5 – 25 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
Test plug
Screwdriver, uninsulated
for WKFN 10 ...
Cross connector, insulated** 2 pole
Cover with warning symbol over 4 blocks yellow
for WKFN 16 ...
Cross connector, insulated* 2 pole
Cover with warning symbol over 4 blocks yellow
** When cross connectors are used acc. to EN 60079-0 and EN 60079-7 the current must be reduced to 4 A/40 K or 5 A/45 K
for type WKFN 10/35.
Accessories for fasis WKFN 10 SL/... and WKFN 16 SL/...
4 mm / 68 mm / 47 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
26 – 14 26 – 14
17,5 A 15 A 15 A 15/13,5 A1)
500 V 300 V 300 V 440 V2)
6 kV
3
4 mm / 68 mm / 47 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
26 – 14 26 – 14
17,5 A 15 A 15 A 15/13,5 A1)
500 V 300 V 300 V 440 V2)
6 kV
3
4 mm / 68 mm / 47 mm
10 mm
8aD KEMA 03 ATEX 2056 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
26 – 14 26 – 14
500 V 300 V 300 V 1)
6 kV
3
WKF 1,5 E2/35 56.702.7653.0 50
WKF 1,5 E2/VB/35 56.702.6953.1 50
WKF 1,5 E2/SL/35 56.702.9253.0 50
WKF 1,5 E2/35
WKF 1,5 E2/VB/35
WKF 1,5 E2/SL/35
78
fasis
Multi-tier block, gray
Multi-tier block, black
Multi-tier ground block, green/yellow
• Multi-tier block with tension spring connection for
mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
• Multi-tier block, vertically connected, with tension
spring connection for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
• Multi-tier ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 1.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note
1)
Rated current when using cross connectors
2)
For maintaining the proper isolation distances, the open side of a
feed-through terminal block as well as both sides of a jumper are to be
covered by partitions.
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note
1)
Rated current when using cross connectors
2)
For maintaining the proper isolation distances, the open side of a
feed-through terminal block as well as both sides of a jumper are to be
covered by partitions.
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section solid/stranded 0.08 – 1.5 mm20.14 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) For maintaining the proper isolation distances, the open side of a
feed-through terminal block as well as both sides of a jumper are to be
covered by partitions.
Multi-tier terminal blocks with tension spring connection
APF 1,5 E2 07.312.8753.0 10
TWF 1,5 E2 07.312.8853.0 10
IVB WKF 1,5 – 2 Z7.268.0227.0 10
IVB WKF 1,5 – 3 Z7.268.0327.0 10
IVB WKF 1,5 – 4 Z7.268.0427.0 10
IVB WKF 1,5 – 5 Z7.268.0527.0 10
IVB WKF 1,5 – 10 Z7.268.1027.0 10
IVB WKF 1,5 – 20 Z7.268.2027.0 10
LEL 1,5/1 WEISS 05.564.4253.0 10
LEL 1,5/2 GRAU 05.564.4353.0 10
ADF 1,5/5 GELB 04.343.6953.8 10
BT 4/2 04.243.0953.0 100
DIN 5264 B 0,4x2,5 06.502.4300.0 5
79
fasis
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
20 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
Cover with warning symbol over 5 blocks yellow
Marking tag carrier, 2-fold
Screwdriver, uninsulated
Accessories for fasis WKF 1,5...
5 mm / 82 mm / 48 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
24 A 20 A 24 A 20/21,5 A1)
500 V 300 V 300 V 440/275 V2)
6 kV
3
5 mm / 82 mm / 48 mm
11 mm
NMD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
24 A 20 A 24 A 20/21,5 A1)
500 V 600 V 600 V 440 V
6 kV
3
5 mm / 82 mm / 48 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 12 24 – 12
500 V 600 V 600 V
6 kV
3
WKFN 2,5 E/35 56.703.7055.0 100
WKFN 2,5 E/N/D/35 56.703.7655.0 100
WKFN 2,5 E/VB/35 56.703.6955.1 100
WKFN 2,5 E/SL/35 56.703.8955.0 100
WKFN 2,5 E/35
WKFN 2,5 E/N/D/35
WKFN 2,5 E/VB/35
WKFN 2,5 E/SL/35
80
fasis
Multi-tier blocks with tension spring connection
Multi-tier block, gray
Multi-tier block, combined, gray
Multi-tier block, black
Ground block, green/yellow
• Multi-tier block with tension spring connection for
mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Multi-tier block, vertically connected, with tension
spring connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Ground block with tension spring connection for
mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
2) When using cross connectors on the upper tier
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
WKFN 2,5 E/N/D/35
Function Color ID
Upper tier Feed-through blue
Lower tier Feed-through gray
5 mm / 82 mm / 48 mm
11 mm
MD PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
24 A 20 A 24 A
500 V 300 V 300 V
6 kV
3
WKFN 2,5 E/D/SL/35 56.703.7855.0 100
WKFN 2,5 E/N/SL/35 56.703.7755.0 100
WKFN 2,5 E/D/SL/35
WKFN 2,5 E/N/SL/35
APFN 2,5 E 07.312.7355.0 10
WFN 2,5 E 07.312.7455.0 10
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 – 20 Z7.280.8027.0 20
IVB WKF–V Z7.261.1127.0 10
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
BT 5/2 04.243.0855.0 100
WKFN 2,5 E.../35 56.703.XX55.5 100
WKFN 2,5 E.../35 56.703.XX55.9 100
WKFN 2,5 E...G
5 mm / 82 mm / 48 mm
11 mm
EMD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
56.703.7555.9
56.703.7555.5
56.703.7155.5
56.703.7155.9
56.703.8255.5 I = 1 A
U = 1000 V
56.703.8055.9 I = 1 A
U = 1000 V
I = 1 A
U = 1000 V
56.703.7955.5
I = 1 A
U = 1000 V
56.703.8355.5 56.703.7355.5
81
fasis
Multi-tier block, combined, gray
Multi-tier block, combined, gray
• Multi-tier block, combined, with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
20 pole
Vertical cross connector 1 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Marking tag carrier, 2-fold
Accessories for fasis WKFN 2,5 E/...
WKFN 2,5 E/D/SL/35
Function Color ID
Upper tier Feed-through gray
Lower tier
Ground conductor
green/yellow
WKFN 2,5 E/N/SL/35
Function Color ID
Upper tier Feed-through blue
Lower tier
Ground conductor
green/yellow
• Multi-tier function block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
Multi-tier function block, red
Multi-tier function block, orange
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Function diagram for fasis WKFN 2,5 E...
The multi-tier block is available on request as a function block for a wide variety of switching tasks.
R = 4.7 kΩ
P = 0.5 W
U = 24 V DC
56.703.7455.9
LED red
R = 4.7 kΩ
P = 0.5 W
U = 24 V DC
56.703.7255.5
LED red
R = 680 kΩ
P = 0.25 W
U = 100-500 V
5 mm / 107 mm / 48 mm
11 mm
NMD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
22 A 20 A 24 A 20/21 A1)
500 V 300 V 300 V 440/275 V2)
6 kV
3
5 mm / 107 mm / 48 mm
11 mm
NMD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
22 A 20 A 24 A 20/21 A1)
500 V 300 V 300 V 440 V
6 kV
3
5 mm / 107 mm / 48 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 12 24 – 12
500 V 600 V 600 V
6 kV
3
TWFN 2,5 E1/2 07.312.7855.0 10
WKFN 2,5 E1/2/35 56.703.6055.0 50
WKFN 2,5 E1/2/N/D/35 56.703.6355.0 50
WKFN 2,5 E1/2/VB/35 56.703.5955.1 50
WKFN 2,5 E1/2/SL/35 56.703.6255.0 50
WKFN 2,5 E1/2/35
WKFN 2,5 E1/2/N/D/35
WKFN 2,5 E1/2/VB/35
WKFN 2,5 E1/2/SL/35
82
fasis
Duo multi-tier terminal blocks with tension spring connection
Multi-tier block, gray
Multi-tier block, combined, gray
Multi-tier block, black
Ground block, green/yellow
• Duo multi-tier block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo multi-tier block, vertically connected, with
tension spring connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Duo multi-tier ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Accessories
Type Part No. Std. Pack
Partition, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
2) When using cross connectors on the upper tier
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
5 mm / 107 mm / 48 mm
11 mm
MD PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
22 A 20 A 24 A
500 V 300 V 300 V
6 kV
3
WKFN 2,5 E1/2/D/SL/35 56.703.6155.0 50
WKFN 2,5 E1/2/N/SL/35 56.703.6455.0 50
WKFN 2,5 E1/2/D/SL/35
WKFN 2,5 E1/2/N/SL/35
APFN 2,5 E1/2 07.312.7755.0 10
TWFN 2,5 E1/2 07.312.7855.0 10
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 – 20 Z7.280.8027.0 20
IVB WKF–V Z7.261.1127.0 10
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
BT 5/2 04.243.0855.0 100
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
83
fasis
WKFN 2,5 E1/2/35 Block color: gray
Function Color ID
Upper tier Feed-through gray
Lower tier Feed-through gray
WKFN 2,5 E1/2/D/SL/35 Block color: gray
Function Color ID
Upper tier Feed-through gray
Lower tier
Ground conductor
green/yellow
WKFN 2,5 E1/2/N/D/35 Block color: gray
Function Color ID
Upper tier Feed-through blue
Lower tier Feed-through gray
WKFN 2,5 E1/2/VB/35 Block color: black
Function Color ID
Upper tier Feed-through black
Lower tier vert. jumpered black
WKFN 2,5 E1/2/N/SL/35 Block color: gray
Function Color ID
Upper tier Feed-through blue
Lower tier
Ground conductor
green/yellow
WKFN 2,5 E1/2/SL/35 Block color: green/yellow
Function Color ID
Upper tier
Ground conductor
green/yellow
Lower tier vert. jumpered green/yellow
Multi-tier block,combined, gray
Multi-tier block, combined, gray
• Duo multi-tier block, combined, with tension
spring connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
20 pole
Vertical cross connector 1 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Marking tag carrier, 2-fold
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 2,5 E1/2/...
5 mm / 123 mm / 59 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
20 A 20 A 24 A 19/20 A1)
500 V 300 V 300 V 440/275 V2)
6 kV
3
5 mm / 123 mm / 59 mm
11 mm
NMnD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
22 – 12 24 – 12
500 V 600 V 600 V
6 kV
3
5 mm / 123 mm / 59 mm
11 mm
NMD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
20 A 20 A 24 A 20/21 A1)
500 V 600 V 600 V 440 V
6 kV
3
WKFN 2,5 E3/35 56.703.3055.0 50
WKFN 2,5 E/SL/35 56.703.8855.0 50
WKFN 2,5 E3/VB/35 56.703.2955.1 50
WKFN 2,5 E3/35
WKFN 2,5 E3/SL/35
WKFN 2,5 E3/VB/35
84
fasis
Multi-tier terminal blocks with tension spring connection
• Multi-tier block with tension spring connection for
mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Multi-tier ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 2,5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Multi-tier block, vertically connected, with tension
spring connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Multi-tier block, gray
Multi-tier ground block, green/yellow
Multi-tier block, black
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
2) When using cross connectors on the upper tier
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.2 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
5 mm / 123 mm / 59 mm
11 mm
NMD9 PTB 04 ATEX 1051 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
22 – 12 24 – 12
20 A 20 A 24 A
500 V 300 V 300 V
6 kV
3
WKFN 2,5 E3/D/D/SL/35 56.703.3355.0 50
WKFN 2,5 E3/N/D/SL/35 56.703.3255.0 50
WKFN 2,5 E3/D/D/SL/35
WKFN 2,5 E3/N/D/SL/35
APFN 2,5 E3 07.312.7555.0 10
TWFN 2,5 E3 07.312.7655.0 10
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 – 20 Z7.280.8027.0 20
IVB WKF–V Z7.261.1127.0 10
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
BT 5/2 04.243.0855.0 100
6 mm / 100 mm / 84 mm
10 mm
D
IEC UL CSA
EN 60 947-7-1/DIN VDE 0611 T1
28 – 10
28 A 30 A
800 V 600 V
8 kV
3
WKF 4 3D/SL 56.704.8453.0 50
WKF 4 3D/SL
85
fasis
WKFN 2,5 E3/D/D/SL/35 Block color: gray
Function Color ID
Upper tier Feed-through gray
Center tier Feed-through gray
Lower tier
Ground conductor
green/yellow
WKFN 2,5 E3/N/D/SL/35 Block color: gray
Function Color ID
Upper tier Feed-through blue
Center tier Feed-through gray
Lower tier
Ground conductor
green/yellow
Multi-tier / Motor connection block with tension spring connection
• Multi-tier block, combined, with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
20 pole
Vertical cross connector 1 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Marking tag carrier, 2-fold
Accessories for fasis WKFN 2,5 E3/...
Description Type Part No. Std. Pack
Multi-tier block, gray
Multi-tier block, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Motor connection block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
Motor connection block,
gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
6 mm / 90 mm / 48 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 10 24 – 10
32 A 30 A 32 A 27/29 A1)2)
500 V 300 V 300 V 440/352 V3)
6 kV
3
6 mm / 90 mm / 48 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
24 – 10 24 – 10
500 V 600 V 600 V
6 kV
3
WKFN 4 E/35 56.704.7055.0 100
WKFN 4 E/N/D/35 56.704.7655.0 100
WKFN 4 E SL/35 56.704.9255.0 100
WKFN 4 E/35
WKFN 4 E/N/D/35
WKFN 4 E/SL/35
6 mm / 90 mm / 48 mm
11 mm
NM PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 10 24 – 10
32 A 30 A 32 A 30/31 A1)
500 V 600 V 300 V 440 V
6 kV
3
WKFN 4 E/VB/35 56.704.6955.1 100
WKFN 4 E/VB/35
86
fasis
WKFN 4 E/N/D/35 Block color: gray
Function Color ID
Upper tier Feed-through blue
Lower tier Feed-through gray
Multi-tier terminal blocks with tension spring connection
• Multi-tier block with tension spring connection for
mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
• Multi-tier ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Multi-tier block, gray
Multi-tier block, combined, gray
Multi-tier ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
2) When cross connectors are used acc. to EN 60079-0 and EN60079-7
the current must be reduced to 2 A at 45 K..
3) When using cross connectors on the upper tier
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Multi-tier block, black
• Multi-tier block, vertically connected, with tension
spring connection for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm20.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm20.2 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) 1. value at 40 K / 2. value at 45 K
6 mm / 90 mm / 48 mm
11 mm
M PTB 05 ATEX 1104 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
24 – 10 24 – 10
32 A 30 A 32 A
500 V 300 V 300 V
6 kV
3
WKFN 4 E/D/SL/35 56.704.7855.0 100
WKFN 4 E/N/SL/35 56.704.7755.0 100
WKFN 4 E/D/SL/35
WKFN 4 E/N/SL/35
APFN 4 E... 07.312.9655.0 10
TWFN 4 E... 07.312.9755.0 10
IVB WKF 4 – 2 Z7.261.1227.0 10
IVB WKF 4 – 3 Z7.261.1327.0 10
IVB WKF 4 – 4 Z7.261.1427.0 10
IVB WKF 4 – 5 Z7.261.1527.0 10
IVB WKF 4 – 6 Z7.261.1627.0 10
IVB WKF 4 – 7 Z7.261.1727.0 20
IVB WKF 4 – 8 Z7.261.1827.0 20
IVB WKF 4 – 9 Z7.261.1927.0 20
IVB WKF 4 – 10 Z7.261.2027.0 20
IVB WKF-V Z7.261.1127.0 10
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/3 SCHWARZ 05.561.8753.0 100
56.704.7555.9
56.704.7555.5
56.704.7155.5
56.704.7155.9
56.704.8255.5 I = 1 A
U = 1000 V
56.704.8055.9 I = 1 A
U = 1000 V
I = 1 A
U = 1000 V
56.704.7955.5
I = 1 A
U = 1000 V
56.704.8355.5 56.704.7355.5
WKFN 4 E /35... 56.704.XX55.5 100
WKFN 4 E /35... 56.704.XX55.9 100
WKFN 4 E /35...
6 mm / 90 mm / 48 mm
11 mm
EMD
IEC UL CSA
EN 60 947-7-1
24 – 10 24 – 10
87
fasis
WKFN 4 E/D/SL/35 Block color: gray
Function Color ID
Upper tier Feed-through gray
Lower tier
Ground conductor
green/yellow
WKFN 4 E/N/SL/35 Block color: gray
Function Color ID
Upper tier Feed-through blue
Lower tier
Ground conductor
green/yellow
Multi-tier terminal blocks with tension spring connection
• Multi-tier block, combined, with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Multi-tier block,
combined
, gray
Multi-tier block,
combined
, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
End plate gray
Partition gray
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
Vertical cross connector, insulated 1 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Accessories for fasis WKFN 4 E/...
Function diagram for fasis WKFN 4 E/...
The multi-tier block is available on request as a function block for a wide variety of switching tasks.
• Multi-tier function block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
Multi-tier function block, red
Multi-tier function block, orange
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
R = 4.7 kΩ
P = 0.5 W
U = 24 V DC
56.704.7455.9
LED red
R = 4.7 kΩ
P = 0.5 W
U = 24 V DC
56.704.7255.5
LED red
R = 680 kΩ
P = 0.25 W
U = 100-500 V
WKFN 2,5 TKM/35 56.703.5355.0 100
WKFN 2,5 TKM 1/2/35 56.703.5455.0 100
WKFN 2,5 TKM 2/2/35 56.703.5555.0 50
WKFN 2,5 TKM/35
WKFN 2,5 TKM 1/2/35
WKFN 2,5 TKM 2/2/35
5 mm / 60 mm / 38 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
24 – 12 24 – 12
20 A 19 A 20 A
630 V 300 V 300 V
6 kV
3
5 mm / 72 mm / 38 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
24 – 12 24 – 12
20 A 19 A 20 A
630 V 300 V 300 V
6 kV
3
5 mm / 85 mm / 38 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
24 – 12 24 – 12
20 A 19 A 20 A
630 V 300 V 300 V
6 kV
3
APFN 2,5 D1/2 07.312.6955.0 10
TWFN 2,5 D1/2 07.312.7055.0 10
APFN 2,5 D2/2 07.312.7155.0 10
TWFN 2,5 D2/2 07.312.7255.0 10
APFN 2,5 TKM D2/2 07.313.0055.0 10
TWFN 2,5 TKM D2/2 07.313.0155.0 10
88
fasis
Disconnect terminal blocks with tension spring connection
• Disconnect terminal block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Duo disconnect terminal block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Duo disconnect terminal block with tension spring
connection for mounting on TS 35
• Nominal cross section 2.5 mm2
Disconnect terminal block, gray
Disconnect terminal block, gray
Disconnect terminal block, gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 2.5 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 2.5 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 2.5 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 –20 Z7.280.8027.0 20
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
5 mm / 107 mm / 48 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
24 – 12 24 – 12
20 A 19 A 20 A
500 V 300 V 300 V
6 kV
3
5 mm / 107 mm / 48 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
24 – 12 24 – 12
19 A 19 A 19 A
500 V 300 V 300 V
6 kV
3
WKFN 2,5 TKM E1/35 56.703.6555.0 50
WKFN 2,5 TKM E2/35 56.703.6655.0 50
WKFN 2,5 TKM E1/35
WKFN 2,5 TKM E2/35
APFN 2,5 E1/2 07.312.7755.0 10
TWFN 2,5 E1/2 07.312.7855.0 10
APFN 2,5 E1/2 07.312.7755.0 10
TWFN 2,5 E1/2 07.312.7855.0 10
89
fasis
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
20 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Multi-tier disconnect terminal block with tension spring connection
Accessories for fasis WKFN 2,5 TKM...
Disconnect terminal block,
gray
Disconnect terminal block,
gray
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 2.5 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.14 – 2.5 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Multi-tier disconnect terminal block with tension
spring connection for mounting on TS 35
• Nominal cross section 2.5 mm2
• Multi-tier disconnect terminal block with tension
spring connection for mounting on TS 35
• Nominal cross section 2.5 mm2
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-3 Z7.261.1327.0 10
IVB WKF 4-4 Z7.261.1427.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-6 Z7.261.1627.0 10
IVB WKF 4-7 Z7.261.1727.0 20
IVB WKF 4-8 Z7.261.1827.0 20
IVB WKF 4-9 Z7.261.1927.0 20
IVB WKF 4-10 Z7.261.2027.0 20
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/3 SCHWARZ 05.561.8753.0 100
ADF 4/4 GELB 04.343.6153.8 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
6 mm / 82 mm / 38 mm
11 mm
MD KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-3 EN 60 079-0/-7
24 – 10 22 – 10
1) 1) 10 A1)
500 V2) 600 V2) 300 V2)
8 kV
3
6 mm / 82 mm / 38 mm
11 mm
MD KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-3 EN 60 079-0/-7
24 – 10 22 – 10
1) 1) 10 A1)
500 V2) 600 V2) 300 V2)
8 kV
3
WKFN 4 TKG/35 56.704.4055.0 100
THSI 5x20 Z1.298.1053.0 10
THSI 5x20 LED24 Z1.298.1153.0 10
THSI 5x20 LED60 Z1.298.1253.0 10
THSI 5x20 GL250 Z1.298.1353.0 10
WKFN 4 TKG/35 56.704.4055.0 100
THSI 6,3x32 Z1.298.1653.0 10
THSI 6,3x32 LED24 Z1.298.1753.0 10
THSI 6,3x32 LED60 Z1.298.1853.0 10
THSI 6,3x32 GL250 Z1.298.1953.0 10
THSI 6,3x32 GL500 Z1.298.2053.0 10
APFN 4 D2/2 07.312.9055.0 10
TWFN 4 D2/2 07.312.9155.0 10
APFN 4 D2/2 07.312.9055.0 10
ZP/WKFN 4 TKG 07.313.1655.0 10
TWFN 4 D2/2 07.312.9155.0 10
90
fasis
Fuse blocks with tension spring connection
• Disconnect ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Disconnect ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
Disconnect ground block, gray
Fuse disconnect lever
Fuse disconnect lever with LED 12–24 V2)
Fuse disconnect lever with LED 24–60 V2)
Fuse disconnect lever with GL 110–250 V2)
Disconnect ground block, gray
Fuse disconnect lever
Fuse disconnect lever with LED 12–24 V2)
Fuse disconnect lever with LED 24–60 V2)
Fuse disconnect lever with GL 110–250 V2)
Fuse disconnect lever with GL 500 V2)
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Intermediate plate, 4 mm, blue
Partition, gray
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
for WKFN 4 TKG with THSi 5x20 3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test adapter, modular
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
For WKFN 4 TKG with THSi 6.3x32 and intermediate plate cross connector IVB WKF 2,5-x must be used.
Info and accessories for fasis WKFN 4 TKG with THSi...
1) The current is determined by the inserted fuse.
2) The voltage range is determined by the built-in LED display.
Depending on the application and the installation method, the
circumstances for increased temperature must be checked in the
closed fuse holders.
Higher ambient temperatures are an additional load for the fuse
inserts. Therefore, the reduction of the rated current must be
considered accordingly in these applications.
Indicator (24 V): LED, red
current consumption: 10.3 mA
Indicator (220 V): LED, red
current consumption: 0.3 mA
When selecting G fuse inserts, make sure that the specifi ed
maximum power is not exceeded.
Maximum power loss at 23° C ambient temperature
(according to DIN EN 60947-7-3)
Type
Rated
voltage
Overload protection Exclusive short-
circuit protection
Single
arrangement
Group
arrangement
Single
arrangement
Group
arrangement
THSI 5 x 20
THSI 6,3 x 32
250 V
500 V
1.6 W
2.5 W
1.6 W
1.6 W
4.0 W
4.0 W
2.5 W
2.5 W
WKFN 4 TKG with THSi 5 x 20
WKFN 4 TKG with THSi 6,3 x 32
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-3 Z7.261.1327.0 10
IVB WKF 4-4 Z7.261.1427.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-6 Z7.261.1627.0 10
IVB WKF 4-7 Z7.261.1727.0 20
IVB WKF 4-8 Z7.261.1827.0 20
IVB WKF 4-9 Z7.261.1927.0 20
IVB WKF 4-10 Z7.261.2027.0 20
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/3 SCHWARZ 05.561.8753.0 100
ADF 4/4 GELB 04.343.6153.8 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
6 mm / 82 mm / 38 mm
11 mm
MD KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-3 EN 60 079-0/-7
24 – 10 22 – 10
1) 1) 10 A1)
500 V2) 600 V2) 300 V2)
8 kV
3
6 mm / 82 mm / 38 mm
11 mm
MD KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-3 EN 60 079-0/-7
24 – 10 22 – 10
1) 1) 10 A1)
500 V2) 600 V2) 300 V2)
8 kV
3
WKFN 4 TKG/35 56.704.4055.0 100
Si ST Z1.299.4055.0 10
Si ST LED Z1.299.4155.0 10
Si ST GL Z1.299.4255.0 10
WKFN 4 TKG/35 56.704.4055.0 100
DIST ... Z1.299.3055.0 10
DIST-1 N 4007-13) Z1.299.3155.0 10
DIST-1 N 4007-24) Z1.299.3355.0 10
DIST-D Z1.299.3255.0 10
APFN 4 D2/2 07.312.9055.0 10
TWFN 4 D2/2 07.312.9155.0 10
APFN 4 D2/2 07.312.9055.0 10
TWFN 4 D2/2 07.312.9155.0 10
91
fasis
• Disconnect ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Disconnect ground block with tension spring
connection for mounting on TS 35
• Nominal cross section 4 mm2
Disconnect ground block, gray
Fuse holder for fuse 5 x 20
Fuse holder with indicator (24 V)2)
Fuse holder with indicator (220 V) 2)
Disconnect ground block, gray
Diode plug – empty Jmax = 10 A1)
Diode plug – diode Jmax = 1 A1)
Diode plug – diode Jmax = 1 A1)
Diode plug with jumper Jmax = 10 A1)
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test adapter, modular
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Info and Accessories for fasis WKFN 4 TKG with SiST and DiST
When selecting G fuse inserts, make sure that the specifi ed
maximum power is not exceeded.
Maximum power loss at 23° C ambient temperature
(according to DIN EN 60947-7-3)
WKFN 4 TKG with SiST
WKFN 4 TKG with DiST
1) The current is determined by the inserted fuse.
2) The voltage range is determined by the built-in LED display.
Depending on the application and the installation method, the
circumstances for increased temperature must be checked in the
closed fuse holders.
Higher ambient temperatures are an additional load for the fuse
inserts. Therefore, the reduction of the rated current must be
considered accordingly in these applications.
Indicator (24 V): LED, red
current consumption: 10.3 mA
Indicator (220 V): LED, red
current consumption: 0.3 mA
3) / 4) Periodic peak voltage 1000 V
Direction Anode Cathode3)
of the diode: Cathode Anode4)
Type
Rated
voltage
Overload protection Exclusive short-
circuit protection
Single
arrangement
Group
arrangement
Single
arrangement
Group
arrangement
SIST 250 V 1.6 W 1.6 W 2.5 W 1.6 W
6 mm / 82 mm / 39 mm
12 mm
IEC UL CSA
EN 60 947-7-3
*
800 V
8 kV
3
6 mm / 82 mm / 39 mm
12 mm
IEC UL CSA
EN 60 947-7-3
*
800 V
8 kV
3
WKFN 4 FSI 56.704.4155.0 100
WKFN 4 FSI LED12 56.704.4255.0 100
WKFN 4 FSI LED24 56.704.5355.0 100
WKFN 4 FSI
WKFN 4 FSI
APFN 4 D2/2 07.312.9055.0 10
ZP/WKFN 4 TKG 07.313.1655.0 10
TWFN 4 D2/2 07.312.9155.0 10
APFN 4 D2/2 07.312.9055.0 10
ZP/WKFN 4 TKG 07.313.1655.0 10
TWFN 4 D2/2 07.312.9155.0 10
92
fasis
Fuse blocks with tension spring connection
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, 4 mm for TCP, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, 4 mm for TCP, gray
Partition, gray
Fuse block,
gray
Fuse block,
gray
Fuse block,
gray
Blade-type automobile fuse, DC 32 V black 1 A
Electrotechnical specialized trade gray 2 A
Motor vehicle accessory market violet 3 A
pink 4 A
beige 5 A
brown 7,5 A
red 10 A
blue 15 A
yellow 20 A
Thermal circuit breaker, DC 32 V 5 A
ETA*, type 1610-21 or 6 A
ETA*, type 1610-H2 with manual release 10 A
15 A
20 A
Thermal circuit breaker, AC 250 V; DC 65 V 0,1 A
ETA*, type 1180 .. 0,2 A
0,5 A
1 A
2 A
3 A
4 A
6 A
8 A
10 A
* E-T-A Elektrotechnische Apparate GmbH, www.e-t-a.de
• Fuse block for automoblie fuses for mounting on
TS 35
• Nominal cross section 4 mm2
• Fuse block with indicator for mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Color
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Observe the derating curve, available in our e-catalog at
https://eshop.wieland-electric.com
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 6 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Observe the derating curve, available in our e-catalog at
https://eshop.wieland-electric.com
Automotive fuses
The WKFN 4 FSI .. type fuse blocks take blade-type
fuses according to ISO 8820 (DIN 72581-3).
Automotive fuses are not offered for sale
by Wieland Electric!
We recommend the following:
WKF 16/35 PV/WKFN
12 mm / 82 mm / 48 mm
15 mm
EJMD8 KEMA 01 ATEX 2087 U
IEC UL CSA ?
EN 60 947-7-3 EN 60 079-0/-7
24 – 4 12 – 4
76 A 75 A 78 A 64 A1)
800 V 600 V 600 V 690 V
8 kV
3
WKF 16/35 PV/WKFN 56.716.0353.0 20
64 76 76 76
32 32 32 32
ADF 16/4 GELB 04.343.6653.8 10
DIN 5264 B 1,0x5,5 06.502.4200.0 5
IVB WKF 4 – 2 Z7.261.1227.0 10
IVB WKF 4 – 3 Z7.261.1327.0 10
IVB WKF 4 – 4 Z7.261.1427.0 10
IVB WKF 4 – 5 Z7.261.1527.0 10
IVB WKF 4 – 6 Z7.261.1627.0 10
IVB WKF 4 – 7 Z7.261.1727.0 20
IVB WKF 4 – 8 Z7.261.1827.0 20
IVB WKF 4 – 9 Z7.261.1927.0 20
IVB WKF 4 – 10 Z7.261.1027.0 20
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/1 SCHWARZ 05.561.8753.0 100
ADF 4/4 GELB 04.343.6153.8 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
93
fasis
Supply terminal
• Supply terminal for mounting on TS 35
• Nominal cross section 2.5 mm2
• Ex e I/II ?II 2GD IM2
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Supply terminal, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 4 – 16 mm24 – 16 mm2
Cross section solid/stranded 4 – 16 mm24 – 16 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) Derating curves available on request
Accessories
Type Part No. Std. Pack
Cover with warning symbol over 4 blocks
Screwdriver, uninsulated
Potential
distribution
Jumpering one side both sides
IVB WKF 4...
single double single double
Imax
INblock
Imax = ∑ In ≤ ∑ INblock
Accessories
Type Part No. Std. Pack
Cross connector, insulated, for 2 blocks
3 blocks
4 blocks
5 blocks
6 blocks
7 blocks
8 blocks
9 blocks
10 blocks
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 4 FSI...
94
fasis CON
DIN rail terminal blocks with plug-in connection
The system
• Rated current up to 32 A
• Connection cross-section 4 mm²
• Width 5 mm
The connectors
For application specific wire harness assemblies,
or single pole test plug.
The terminals
Modular DIN rail mount terminals for universal use
with pluggable connectors, all with tension spring
connection technology.
In addition to the pluggable connection, a tension
spring connection also is available to use the
block as a standard feed-through terminal.
Integrated safety
Touch protection of all components, even when
not connected, IP 20 when connected.
All plug connectors have a built-in latching
mechanism and coding option – no further
accessories required.
The labeling system
All termination points can be clearly labeled using
the standard Wieland labeling system.
The jumpering system
The standard Wieland push-in jumper system can
be used in both the modular terminal and in the
plug-in connector.
All basic terminals are fully compatible with the
fasis WKFN series, including the 16 mm² feed-in
terminal.
The modular terminal block’s integrated jumper
channel maintains a permanent feed-through
connection even when the plug is not installed.
95
fasis CON
Plug & Play in the control cabinet – with
fasis CON
fasis CON is a DIN rail terminal block system with a pluggable
outgoing feeder, which offers modular, cost-saving solutions
with advantages in every phase of the service life of an
electrical system.
fasis
CON is a fully compatible part of the established fasis
WKFN system. Both the terminal and the plug connector
possess the high-performance features of fasis WKFN.
fasis CON consists of feed-through and ground DIN rail
terminal blocks with a wide variety of both wiring termination
points and sockets for the fasis CON pluggable connectors.
fasis CON is a cost-effective, high-performance and
pluggable system solution.
• Cost-optimized installation and maintenance times
• Small numbers of components
• Can be assembled individually
• Pre-assembled modules
• Range of terminals up to 4 mm²
• Rated current up to 32 A*
• Rated voltage 500 V
• Total width only 5 mm
• Complex systems can be brought on-line quickly and cost-
effectively with pluggable technology
• Functional units can be tested easily
• Field components can be more quickly replaced when
faults occur
• Systems can be expanded with pluggable technology
• Uniform accessories
• Coded to prevent mismating
• All components can be jumpered
• Comprehensive and clear labeling
• Can be combined with fasis WKFN
Cost-effective
High-performance
Pluggable
Complete system
* Observe the derating curve, available in our e-catalog at https://eshop.wieland-electric.com
5 mm / 60 mm / 39 mm
11 mm
M
IEC UL CSA
EN 60 947-7-1/-2
24 – 12
32 A* 20 A
500 V 300 V
8 kV
3
5 mm / 85 mm / 39 mm
11 mm
M
IEC UL CSA
EN 60 947-7-1/-2
24 – 12
32 A* 20 A
500 V 300 V
8 kV
3
5 mm / 82 mm / 49 mm
11 mm
M
IEC UL CSA
EN 60 947-7-1/-2
24 – 12
22 A* 20 A
500 V 300 V
8 kV
3
WKFN 2,5 F/P/F 56.703.2355.0 100
WKFN 2,5 F/P/F 56.703.2355.6 100
WKFN 2,5 F/P/F-SL 56.703.2455.0 100
WKFN 2,5 2P/2F 56.703.2155.0 100
WKFN 2,5 2P/2F 56.703.2155.6 100
WKFN 2,5 2P/2F-SL 56.703.2255.0 100
WKFN 2,5 E/F/P 56.703.3455.0 100
WKFN 2,5 E/VB/F/P 56.703.3555.1 100
WKFN 2,5 E/F/P/SL 56.703.3655.0 100
WKFN 2,5 F/P/F
WKFN 2,5 2P/2F
WKFN 2,5 E/../../..
APFN 2,5 D1/2 07.312.6955.0 10
APFN 2,5 D1/2 BLAU 07.312.6955.6 10
TWFN 2,5 D1/2 07.312.7055.0 10
APFN 2,5 TKM D2/2 07.313.0055.0 10
TWFN 2,5 TKM D2/2 07.313.0155.0 10
APFN 2,5 E 07.312.7355.0 10
TWFN 2,5 E 07.312.7455.0 10
96
fasis CON
DIN rail terminal blocks with plug-in connection
Feed-through block F/P/F,
gray
Feed-through block F/P/F,
blue
Ground block, green/yellow
Feed-through block 2P/2F,
gray
Feed-through block 2P/2F,
blue
Ground block, green/yellow
Multi-tier block E/F/P, gray
Multi-tier block, vertically connected, black
Multi-tier ground block, green/yellow
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Observe the derating curve, available in our e-catalog at
https://eshop.wieland-electric.com
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Observe the derating curve, available in our e-catalog at
https://eshop.wieland-electric.com
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Observe the derating curve, available in our e-catalog at
https://eshop.wieland-electric.com
• DIN rail terminal blocks with plug-in connection
for mounting on TS 35
• Nominal cross section 2.5 mm2
• DIN rail terminal blocks with plug-in connection
for mounting on TS 35
• Nominal cross section 2.5 mm2
• Multi-tier blocks with plug-in connection
for mounting on TS 35
• Nominal cross section 2.5 mm2
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
L M R
5 mm
11 mm
IEC UL CSA
EN 60 947-7-1/-2
24 – 12
32 A* 20 A
500 V 300 V
8 kV
3
WBF 2,5 1/L/GR Z1.110.8955.0 50
WBF 2,5 1/L/BL Z1.110.8955.6 50
WBF 2,5 1/L/SL Z1.110.8955.7 50
WBF 2,5 1/M/GR Z1.110.8855.0 50
WBF 2,5 1/M/BL Z1.110.8855.6 50
WBF 2,5 1/M/SL Z1.110.8855.7 50
WBF 2,5 1/R/GR Z1.110.9055.0 50
WBF 2,5 1/R/BL Z1.110.9055.6 50
WBF 2,5 1/R/SL Z1.110.9055.7 50
WBF 2,5-1 59.903.0155.0 50
WBF 2,5-2 59.903.0255.0 50
WBF 2,5-3 59.903.0355.0 50
WBF 2,5-4 59.903.0455.0 50
WBF 2,5-5 59.903.0555.0 50
WBF 2,5-6 59.903.0655.0 25
WBF 2,5-7 59.903.0755.0 25
WBF 2,5-8 59.903.0855.0 25
WBF 2,5-9 59.903.0955.0 25
WBF 2,5-10 59.903.1055.0 25
WBF 2,5/../..
Z-WBF 05.567.9155.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 10
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
IVB WKF 2,5-2 Z7.280.6227.0 10
IVB WKF 2,5-3 Z7.280.6327.0 10
IVB WKF 2,5-4 Z7.280.6427.0 10
IVB WKF 2,5-5 Z7.280.6527.0 10
IVB WKF 2,5-6 Z7.280.6627.0 10
IVB WKF 2,5-7 Z7.280.6727.0 20
IVB WKF 2,5-8 Z7.280.6827.0 20
IVB WKF 2,5-9 Z7.280.6927.0 20
IVB WKF 2,5-10 Z7.280.7027.0 20
IVB WKF 2,5-20 Z7.280.8027.0 20
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/1 GRAU 05.564.3855.0 100
LELN 2,5/1 SCHWARZ 05.564.3955.0 100
ADFN 2,5/4 GELB 04.343.8353.8 10
PS WKC/F Z1.299.9753.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
97
fasis CON
Connectors
Connectors LEFT
gray
blue
green/yellow
Connectors MIDDLE
gray
blue
green/yellow
Connectors RIGHT
gray
blue
green/yellow
Connectors preassembled,
gray
1 pole
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 4 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note * Observe the derating curve, available in our e-catalog at
https://eshop.wieland-electric.com
• Connectors for DIN rail terminal blocks
with plug-in connection
Accessories
Type Part No. Std. Pack
Strain relief
Screwdriver, uninsulated
Screwdriver, MINI
Accessories
Type Part No. Std. Pack
Cross connector, insulated, for 2 blocks
3 blocks
4 blocks
5 blocks
6 blocks
7 blocks
8 blocks
9 blocks
10 blocks
20 blocks
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks yellow
Test adapter, modular
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKFN 2,5...
5 mm / 76 mm / 42 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
16 A 15 A 15 A
250 V 300 V 300 V
4 kV
3
5 mm / 76 mm / 42 mm
11 mm
MD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
16 A
250 V 300 V 300 V
4 kV
3
5 mm / 83 mm / 51 mm
8 mm
NMD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
16 A
250 V
4 kV
3
WKF 2,5 D2/8113/35 56.703.2053.0 100
WKF 2,5 D2/8113/35 BLAU 56.703.2053.6 100
WKF 2,5 D2/8113 SL/35 56.703.9253.0 100
WKF 1,5 E/8113/35 56.702.2053.0 100
WKF 2,5 D2/8113/35
WKF 2,5 D2/8113/SL/35
WKF 1,5 E/8113/35
APF 2,5/D2/8113 07.312.4153.0 10
APF 2,5/D2/8113 07.312.4153.6 10
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
ADF 2,5/4 GELB 04.343.6053.8 10
APF 2,5/D2/8113 07.312.4153.0 10
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
ADF 2,5/4 GELB 04.343.6053.8 10
APF 1,5/E/8113 07.312.4753.0 10
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
ADF 1,5/4 GELB 04.343.8353.8 10
98
fasis
DIN rail terminal blocks with tension spring and pluggable connections
Accessories
Type Part No. Std. Pack
End plate, gray
End plate, blue
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks
Accessories
Type Part No. Std. Pack
End plate, gray
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks
Accessories
Type Part No. Std. Pack
End plate, gray
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks
Du feed-through block,
gray
Duo feed-through block,
blue
Duo-Ground block, green/yellow
Multi-tier block, gray
• Duo feed-through block for mounting on TS 35
• Nominal cross section 2.5 mm2
• Duo-Ground block for mounting on TS 35
• Nominal cross section 2.5 mm2
• Multi-tier block for mounting on TS 35
• Nominal cross section 1.5 mm2
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 2.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
5 mm / 83 mm / 51 mm
8 mm
NMD
IEC UL CSA
EN 60 947-7-1
30 – 14 30 – 14
17,5 A 15 A 15 A
400 V 300 V 600 V
6 kV
3
9 mm
NMD
IEC UL CSA
EN 60 947-7-1
22 – 12 22 – 12
12 A 12 A 12 A
300 V 300 V
WKF 1,5 E/35 56.702.7053.0 100
WKF 1,5 E/35
APF 1,5 E 07.312.3553.0 10
TWF 1,5 E 07.312.3653.0 10
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
ADF 1,5/4 GELB 04.343.8353.8 10
25.920.3253.0 25.920.0253.0 100
25.920.3353.0 25.920.0353.0 100
25.920.3453.0 25.920.0453.0 50
25.920.3553.0 25.920.0553.0 50
25.920.3653.0 25.920.0653.0 50
25.920.3753.0 25.920.0753.0 50
25.920.3853.0 25.920.0853.0 50
25.920.3953.0 25.920.0953.0 50
25.920.4053.0 25.920.1053.0 50
25.920.4153.0 25.920.1153.0 50
25.920.4253.0 25.920.1253.0 50
25.920.4353.0 25.920.1353.0 50
25.920.4453.0 25.920.1453.0 50
25.920.4553.0 25.920.1553.0 50
25.920.4653.0 25.920.1653.0 50
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 – 20 Z7.280.8027.0 20
AD 8113/4 GELB 04.343.6853.8 10
DIN 5264 B 0,6x 3,5 06.502.4000.0 5
05.561.0053.0 100
99
fasis
5 mm spacing unmarked marked
10.00 5.00 2
15.00 10.00 3
20.00 15.00 4
25.00 20.00 5
30.00 25.00 6
35.00 30.00 7
40.00 35.00 8
45.00 40.00 9
50.00 45.00 10
55.00 50.00 11
60.00 55.00 12
65.00 60.00 13
70.00 65.00 14
75.00 70.00 15
80.00 75.00 16
17- to 24- pole confi gurations upon request
G T Pole Part No. Part No. Std. Pack
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Cover with warning symbol over 4 blocks
Multi-tier block, gray
• Multi-tier block for mounting on TS 35
• Nominal cross section 1.5 mm2
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 2.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
20 pole
Cover with warning symbol over 4 poles yellow
Screwdriver, uninsulated
Coding strip
Accessories for fasis WKF 2,5 D... and WKF 1,5 E...
wiecon PC board connector
Type 8113 BFK
• Spring clamp/tension spring system
• 5 mm spacing, nominal cross section 2,5 mm2
• Accessories: coding pice 05.561.9153.0
• Rated voltages: VDE 0110/01.89
250 V/4 kV/3 – Overvoltage category III
400 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
100
fasis
Initiator and actuator blocks with tension spring connection
Economically
designed
• Control-compatible system solutions through accurate
matching of the connection modules’ number of poles to
the input and output modules of the PLC.
• Flexible connection module mounting options with either
snap-on TS 35 DIN rail mount, or direct mounting to a
backplane with screws.
• Application-specific individual terminal block as a link
between initiators, actuators and the PLC.
System features
and benefi ts
• Low space requirements due to compact dimensioning of
the individual terminal blocks and integration of the potential
distribution inside the connection module.
• Efficient installation and start-up of the wiring system by
simply fitting the connection module with components,
making further accessories unnecessary.
• Reduction of the warehousing costs due to a low variety of
parts without having to forego flexibility in the application.
• Short maintenance times for modifications of the terminal
block assembly by replacing or extending individual blocks
without interrupting the power supply of the other initiator
and actuator blocks.
• Immediate visual monitoring of the switching states due
to integrated light-emitting diodes.
• No maintenance required due to a permanently secure and
dynamic tension spring clamp connection system.
For machine and system control wiring, practice-oriented
solutions are preferred that are primarily economical and
reliable and thus contribute to the system’s operational and
functional safety.
fasis KOI was designed to connect the great variety of
initiators and actuators to central and remote control systems.
The initiator and actuator blocks of type WKF 1,5 KOI have,
in particular, been conceived for the requirements in machine
and system engineering. They facilitate the wiring task
through clearly arranged termination points and an easily
accessible and operable tension spring technology.
fasis KOI is a compact and efficient wiring system for
connection purposes, potential distribution and transmission
of signals from initiators and actuators.
• Power supply to the connection modules through supply
blocks, with optional LEDs.
• Potential distribution through connection modules in
designs for 9 (1+8) or 18 (2x(1+8)) terminal blocks.
• Initiator blocks, for example for the connection of 3-wire
or 4-wire proximity or position switches, with optional
LEDs.
• Actuator terminals, for example for the connection of
magnetic valves.
Service-friendly
operation
Application
specifi c options
101
fasis
Marking system All clamping points marked clearly
• Marking tags easily readable even with the wires connected.
• Clear assignment of wire to the termination point while
wiring.
• Simplified troubleshooting for servicing.
• Customized marking with the wiemarc and wieplot
marking systems.
Wire entry guides Connect small cross sections safely
• Wire entry guides prevent the wires from being inserted
too deeply (smaller than 1 mm2) and enable an easy,
professional and quick installation.
• Ensure the connection of solid and fine-stranded wires
smaller than 1 mm2.
•
Also see the accessories for DIN rail terminal blocks
starting at page 120!
Collect and distribute potentials
• Potential distribution is achieved quickly and safely as soon
as the terminal blocks are snapped on.
• Cross connectors for the plus, minus and ground or screen
potential are each integrated in the connection modules.
• The system does not require any additional cross
connectors.
Connection
module
Materials High-quality materials
• Special alloys enable low feed-through resistance and
provide a gas-tight contact area:
– clamping spring: stainless CrNi steel
– current-carrying bar: tin-plated copper
• Polyamide has excellent electrical, chemical and
mechanical characteristics:
– temperature resistance: up to 120°C
– creepage resistance: CTI 600
– flammability class: self-extinguishing, UL94-V2
5 mm / 71 mm / 48 mm
10 mm
MD
IEC UL CSA
EN 60 947-7-1
28 – 16
10 A 10 A
* 65 V
5 mm / 71 mm / 48 mm
10 mm
MD
IEC UL CSA
EN 60 947-7-1
28 – 16
10 A 10 A
* 65 V
5 mm / 71 mm / 48 mm
10 mm
MD
IEC UL CSA
EN 60 947-7-1
28 – 16
10 A 10 A
* 65 V
WKF 1,5 KOI 3L 37.702.7453.0 50
WKF 1,5 KOI 3L-PGE 37.702.8453.0 50
WKF 1,5 KOI 3L/SL 37.702.7553.0 50
WKF 1,5 KOI 3L/SL-PGE 37.702.8553.0 50
WKF 1,5 KOE 37.702.7753.0 50
WKF 1,5 KOE-PGN 37.702.8753.0 50
WKF 1,5 KOI 3L...
WKF 1,5 KOI 3L/SL...
WKF 1,5 KOE...
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
DIN 5264 B 0,6x3,5 06.502.4000.0 5
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
DIN 5264 B 0,6x3,5 06.502.4000.0 5
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
DIN 5264 B 0,6x3,5 06.502.4000.0 5
102
fasis
Initiator and actuator blocks with tension spring connection
Initiator block,
gray
Initiator block with LED,
gray
Initiator block,
gray
Initiator block with LED,
gray
Supply block,
black
Supply block with LED,
black
• Initiator block with tension spring connection for
mounting on TS 35
• Nominal cross section 1.5 mm2
• Initiator block with tension spring connection for
mounting on TS 35
• Nominal cross section 1.5 mm2
• Supply block with tension spring connection for
mounting on TS 35
• Nominal cross section 1.5 mm2
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Screwdriver, uninsulated
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Screwdriver, uninsulated
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Screwdriver, uninsulated
37.702.8453.0
* DC 24 V
same as picture,
but with LED
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
37.702.8553.0
* DC 24 V
same as picture,
but with LED
37.702.8753.0
* DC 24 V
same as picture,
but with LED
37.702.7753.0
* 65 V/1.5 kV/3
37.702.7553.0
* 65 V/1.5 kV/3
37.702.7453.0
* 65 V/1.5 kV/3
5 mm / 71 mm / 48 mm
10 mm
MD
IEC UL CSA
EN 60 947-7-1
28 – 16
10 A 10 A
* 65 V
MD
IEC UL CSA
EN 60 947-7-1
10 A 10 A
* 65 V
WKF 1,5 KOA 2L 37.702.7653.0 50
WKF 1,5 KOA 2L/SL-PGE 37.702.8653.0 50
VM WKF KO..9 69.700.0953.0 10
VM WKF KO..18 69.700.1853.0 5
WKF 1,5 KOA 2L...
VM WKF ...
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
DIN 5264 B 0,6x3,5 06.502.4000.0 5
103
fasis
Actuator block,
gray
Actuator block with LED,
gray
Connection module for 9 blocks, black
Connection module for 18 blocks, black
• Actuator block with tension spring connection for
mounting on TS 35
• Nominal cross section 1.5 mm2
• Connection module for 9 or 18 blocks
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Length: 9 pole module L = 9 x 5 mm + 1.5 mm
Length: 18 pole module L = 18 x 5 mm + 1.5 mm
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 1.5 mm2
Cross section solid/stranded 0.13 – 1.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Screwdriver, uninsulated
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
37.702.8653.0
* DC 24 V
same as picture,
but with LED
37.702.7653.0
* 65 V/1.5 kV/3
104
fasis MINI
DIN rail terminal blocks with tension spring connection
Application specifi c
options
• The tension spring system provides a dynamic clamping
connection. Load-controlled and thermal cold flow
properties of the connected wires are balanced.
• Maintenance-free and gas-tight electrical connection as
specified by the approvals. Customized layouts can be
created individually.
• Separation of electrical and mechanical functions.
• Space-saving miniature terminal blocks in many designs
for installation inside distribution boxes, motors and
applications with confined space requirements.
• Easy wiring with user-friendly screwdriver entry guides at
the top of the block.
• Marking tags easily readable even with the wires
connected.
• Customized assembly design and marking using wieplan
and wiemarc.
• Miniature terminal blocks with push-in mounting pin for
installation directly onto the panel.
• Miniature terminal blocks with screw flange for installation
directly onto the panel.
• Miniature terminal blocks for installation on TS 15 or
TS 35 mounting rails.
Solutions for
confi ned spaces
With our DIN rail terminal block system fasis MINI we focus
on the application‘s size and flexibility. fasis MINI is a range
of DIN rail terminal blocks in tension spring technology
designed for installation in confined spaces.
The portfolio comprises ground blocks and feed-through
blocks in various colors with 2 or 4 connections per potential.
The potential in the WKFM 2,5 terminal block series can
be distributed, modified and extended quickly, flexibly and
without problem by using cross connectors.
Designed to be mounted in various ways, including TS 35
and TS 15 DIN rails, backpanels, or inside distribution boxes,
we provide different solutions including snap-on mounting
feet, pins, and screw flanges.
Customized
assembly
• DIN rail terminal blocks of the fasis MINI series are
available in 2 and 4 pole configurations.
• fasis MINI blocks can be snapped together with the
integrated latching pins, with or without a mounting rail.
• The various potentials and terminal blocks are visually
distinguished by several color variations.
• Individual marking using marking tags or customized
printing of the terminal blocks.
Permanent electrical
connection
5 mm / 36 mm / 30 mm
10 mm
8aD KEMA 03 ATEX 2071 U
IEC UL CSA ?
EN 60 947-7-1 EN 60 079-0/-7
26 – 12 26 – 12
24 A 20 A 20 A 19/20 A1)
500 V 600 V 300 V 275 V2)
6 kV
3
5 mm / 36 mm / 30 mm
10 mm
8aD KEMA 03 ATEX 2071 U
IEC UL CSA ?
EN 60 947-7-2 EN 60 079-0/-7
26 – 12 26 – 12
500 V 600 V 300 V 1)
6 kV
3
WKMF 2,5/15 55.703.0053.0 100
WKMF 2,5/15 55.703.0053.6 100
WKMF 2,5 SL/15 55.703.9053.0 100
WKMF 2,5/15
WKMF 2,5 SL/15
APMF 2,5 /15 07.312.5953.0 10
IVB WKMF 2,5 – 2 Z7.260.0229.0 10
IVB WKMF 2,5 – 3 Z7.260.0329.0 10
IVB WKMF 2,5 – 4 Z7.260.0429.0 10
IVB WKMF 2,5 – 5 Z7.260.0529.0 10
IVB WKMF 2,5 – 10 Z7.260.1029.0 10
IVB WKMF 2,5 M50 Z7.260.0029.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
105
fasis MINI
Feed-through block, gray
Feed-through block, blue
Ground block, green/yellow
• Feed-through block with tension spring
connection for mounting on TS 15
• Nominal cross section 2.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
• Ground block with tension spring connection for
mounting on TS 15
• Nominal cross section 2.5 mm2
• Ex e II ?II 2GD
Follow the EX installation instructions on page 143
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 5.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.5 – 2.5 mm2
Cross section solid/stranded 0.13 – 2.5 mm20.5 – 2.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) with/without jumper
2) For maintaining the proper isolation distances, the open side of feed-
through or ground blocks as well as both sides of a jumper are to be
covered by partitions.
General data
Width / length / height, incl. TS 5.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm20.5 – 2.5 mm2
Cross section solid/stranded 0.13 – 2.5 mm20.5 – 2.5 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Note 1) For maintaining the proper isolation distances, the open side of feed-
through or ground blocks as well as both sides of a jumper are to be
covered by partitions.
Accessories
Type Part No. Std. Pack
End plate, 1.5 mm wide gray
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
50 pole
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WKMF 2,5...
5 mm / 36 mm / 23 mm
11 mm
EMD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
10 mm / 36 mm / 23 mm
11 mm
EMD
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
WKF 2,5/M 37.703.0553.0 100
WKF 2,5/M BLAU 37.703.0553.6 100
WKF 2,5/M ORANGE 37.703.0553.9 100
WKF 2,5/M/F 39.703.0153.0 100
WKF 2,5/M/F BLAU 39.703.0153.6 100
WKF 2,5/M/F ORANGE 39.703.0153.9 100
WKF 2,5/MD 37.703.1053.0 100
WKF 2,5/MD BLAU 37.703.1053.6 100
WKF 2,5/MD ORANGE 37.703.1053.9 100
WKF 2,5/MD/F 39.703.0253.0 100
WKF 2,5/MD/F BLAU 39.703.0253.6 100
WKF 2,5/MD/F ORANGE 39.703.0253.9 100
WKF 2,5/MD/F
WKF 2,5/MD
WKF 2,5/M/F
WKF 2,5/M
APF 2,5/M.../F/R 07.312.3153.0 10
APF 2,5/M.../F/R BLAU 07.312.3153.6 10
APF 2,5/M.../F/R ORANGE 07.312.3153.9 10
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
05.902.3500.0 10
04.244.0053.0 5
04.844.2053.0 5
04.844.2153.0 5
04.844.2253.0 5
DIN 5264 B 0,6 x 3,5 06.502.4000.0 5
106
fasis MINI
Mini terminal blocks with tension spring connection
Accessories
Type Part No. Std. Pack
End plate with fl ange on the right gray
End plate with fl ange on the right blue
End plate with fl ange on the right orange
Wire entry guide 0.13 – 0.2 mm2
Wire entry guide 0.25 – 0.5 mm2
Wire entry guide 0.75 – 1.0 mm2
Cross connector, insulated 2 pole
Marking strip, unmarked (4 x 22 pcs.)
marked (1 – 11)
marked (12 – 55)
marked (56 – 99)
Screwdriver, uninsulated
Accessories for fasis WKF 2,5/M...
WKF 2,5/M with fl ange
• Feed-through block with tension spring
connection with or without fl ange
• Nominal cross section 2.5 mm2
WKF 2,5/MD with fl ange
• Duo feed-through block with tension spring
connection with or without fl ange
• Nominal cross section 2.5 mm2
Feed-through block unmarked, gray
Feed-through block unmarked, blue
Feed-through block unmarked, orange
Feed-through block with fl ange, gray
Feed-through block with fl ange, blue
Feed-through block with fl ange, orange
Duo feed-through block
unmarked
, gray
Duo feed-through block
unmarked
, blue
Duo feed-through block
unmarked
, orange
Duo feed-through block
with fl ange
, gray
Duo feed-through block
with fl ange
, blue
Duo feed-through block
with fl ange
, orange
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage 8 kV
Pollution degree 3
General data
Width / length / height
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
5 mm / 36 mm / 23 mm
11 mm
EMDU
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
10 mm / 36 mm / 23 mm
11 mm
EMDU
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
WKF 2,5/M/R 38.703.0553.0 100
WKF 2,5/M/R BLAU 38.703.0553.6 100
WKF 2,5/M/R ORANGE 38.703.0553.9 100
WKF 2,5/MD/R 38.703.1053.0 100
WKF 2,5/MD/R BLAU 38.703.1053.6 100
WKF 2,5/MD/R ORANGE 38.703.1053.9 100
APF 2,5/M... 07.312.2953.0 10
APF 2,5/M... BLAU 07.312.2953.6 10
APF 2,5/M... ORANGE 07.312.2953.9 10
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
05.902.3500.0 10
04.244.0053.0 5
04.844.2053.0 5
04.844.2153.0 5
04.844.2253.0 5
DIN 5264 B 0,6 x 3,5 06.502.4000.0 5
107
fasis MINI
Accessories
Type Part No. Std. Pack
End plate gray
End plate blue
End plate orange
Wire entry guide 0.13 – 0.2 mm2
Wire entry guide 0.25 – 0.5 mm2
Wire entry guide 0.75 – 1.0 mm2
Cross connector, insulated 2 pole
Marking strip, unmarked (4 x 22 pcs.)
marked (1 – 11)
marked (12 – 55)
marked (56 – 99)
Screwdriver, uninsulated
Accessories for fasis WKF 2,5/M.../R
WKF 2,5/M/R with mounting foot
• Feed-through block with tension spring
connection, unmarked
• Nominal cross section 2.5 mm2
WKF 2,5/MD/R with mounting foot
• Duo feed-through block with tension spring
connection, unmarked
• Nominal cross section 2.5 mm2
Feed-through block unmarked, gray
Feed-through block unmarked, blue
Feed-through block unmarked, orange
Duo feed-through block
unmarked
, gray
Duo feed-through block
unmarked
, blue
Duo feed-through block
unmarked
, orange
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Mounting hole: Ø 3,5 mm
Plate thickness: 0,6 – 1,2 mm
Mounting hole: Ø 3,5 mm
Plate thickness: 0,6 – 1,2 mm
5 mm / 36 mm / 27 mm
11 mm
EMDU
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
10 mm / 36 mm / 27 mm
11 mm
EMDU
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
WKF 2,5/M/15 55.703.0553.0 100
WKF 2,5/M/15 BLAU 55.703.0553.6 100
WKF 2,5/M/15 ORANGE 55.703.0553.9 100
WKF 2,5/M/15 GRÜN 55.703.0553.7 100
WKF 2,5/MD/15 55.703.1053.0 100
WKF 2,5/MD/15 BLAU 55.703.1053.6 100
WKF 2,5/MD/15 ORANGE 55.703.1053.9 100
WKF 2,5/MD/15 GRÜN 55.703.1053.7 100
WKF 2,5/M/15
WKF 2,5/MD/15
108
fasis MINI
Mini terminal blocks with tension spring connection
• Feed-through block with tension spring
connection, unmarked, for mounting on TS 15
• Nominal cross section 2.5 mm2
• Duo feed-through block with tension spring
connection, unmarked, for mounting on TS 15
• Nominal cross section 2.5 mm2
Feed-through block unmarked, gray
Feed-through block unmarked, blue
Feed-through block unmarked, orange
Feed-through block unmarked, green
Duo feed-through block
unmarked
, gray
Duo feed-through block
unmarked
, blue
Duo feed-through block
unmarked
, orange
Duo feed-through block
unmarked
, green
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 5.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 5.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
5 mm / 36 mm / 32 mm
11 mm
EMDU
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
10 mm / 36 mm / 32 mm
11 mm
EMDU
IEC UL CSA
EN 60 947-7-1
22 – 12 24 – 12
24 A 20 A 25 A
800 V 600 V 600 V
8 kV
3
WKF 2,5/M/35 56.703.0553.0 100
WKF 2,5/M/35 BLAU 56.703.0553.6 100
WKF 2,5/M/35 ORANGE 56.703.0553.9 100
WKF 2,5/M/35 GRÜN 56.703.0553.7 100
WKF 2,5/MD/35 56.703.1053.0 100
WKF 2,5/MD/35 BLAU 56.703.1053.6 100
WKF 2,5/MD/35 ORANGE 56.703.1053.9 100
WKF 2,5/MD/35 GRÜN 56.703.1053.7 100
APF 2,5/M... 07.312.2953.0 10
APF 2,5/M... BLAU 07.312.2953.6 10
APF 2,5/M... ORANGE 07.312.2953.9 10
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
05.902.3500.0 10
04.244.0053.0 5
04.844.2053.0 5
04.844.2153.0 5
04.844.2253.0 5
04.244.0053.8 5
DIN 5264 B 0,6 x 3,5 06.502.4000.0 5
WKF 2,5/M/35
WKF 2,5/MD/35
109
fasis MINI
• Feed-through block with tension spring
connection, unmarked, for mounting on TS 35
• Nominal cross section 2.5 mm2
• Duo-Feed-through block with tension spring
connection, unmarked, for mounting on TS 35
• Nominal cross section 2.5 mm2
Feed-through block unmarked, gray
Feed-through block unmarked, blue
Feed-through block unmarked, orange
Feed-through block unmarked, green
Duo-Feed-through block
unmarked
, gray
Duo-Feed-through block
unmarked
, blue
Duo-Feed-through block
unmarked
, orange
Duo-Feed-through block
unmarked
, green
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals
Technical data
Cross section fi ne-stranded 0.13 – 2.5 mm2
Cross section solid/stranded 0.13 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate gray
End plate blue
End plate orange
Wire entry guide 0.13 – 0.2 mm2
Wire entry guide 0.25 – 0.5 mm2
Wire entry guide 0.75 – 1.0 mm2
Cross connector, insulated 2 pole
Marking strip, unmarked (4 x 22 pcs.)
marked (1 – 11)
marked (12 – 55)
marked (56 – 99)
yellow, unmarked
Screwdriver, uninsulated
Accessories for fasis WKF 2,5/M...
110
fasis
111
fasis
fasis WTP – DIN rail terminal blocks
with push-in connection
Terminate wires easily, directly and without tools!
fasis WTP – DIN rail terminal blocks with push-in connection.
Built according to an effective and comprehensive concept,
including compact design and high-performance contact
technology, fasis WTP reduces installation time and keeps
inventory costs to a minimum.
The product line includes feed-through and ground
blocks with 2, 3 or 4 termination points, as well as
multi-tier blocks.
fasis WTP has been designed for use in machinery
and plant engineering, as well as power distribution
for buildings.
Connection cross-sections up to 10 mm²
Rated current of up to 57 A
Rated voltage of up to 1000 V
4 mm² 6 mm² 10 mm²
32 A 57 A
5 mm 8 mm
Ä Ä
WTP 2,5/4 WTP 6/10
112
fasis
Integrated release lever
• No mix-up of wire-entry and screwdriver
entry points
• No contact with live parts
• Use of Philips head screwdriver also
possible
Connect without tools
• Push-in connection
• Wires connect directly
fasis push-in
Nominal cross section
2.5 mm²
Rated current
Width
fasis WTP – wires simply push-in
The same functionality –
fewer items
• 2.5 & 4 mm² and 6 & 10 mm² in one block
Plug & Play – Completing the Concept
• Dual jumpering channels
• Plug-in jumper bars
• Plug-in test adapter
113
fasis
Marking strips – Dependable
• Maximum hold to the terminal
•
Solidify integrity of the assembly Endless strip – Effective
• Mounting facilty for endless strips permits
single step marking of entire assembly
• Continuous labeling
• Uses commercially available labeling
systems
Marking tags – Individual
• Individual labeling with minimum
effort
• Ideal for service and maintenance
Wieland marking system – Reliable identifi cation
Wieland jumpering system – Perfect technology
Extremely rugged!
• Indestructible steel spring
•
Vibration-proof connection
Simple customization
• Individual poles easy to remove
• Circuits easy to identify
Perfect technology
• Copper current bar guarantees low contact
resistance
• Steel spring guarantees strength, durability,
and long-term stability
Copper
Steel
WTP 2,5/4
WTP 2,5/4 D1/2
WTP 2,5/4 D2/2
5 mm / 47 mm / 38 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-1
24 – 12 24 – 12
32 A 30 A 30 A
1000 V 600 V 600 V
8 kV
3
5 mm / 60 mm / 38 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-1
24 – 12 24 – 12
32 A 30 A 30 A
1000 V 600 V 600 V
8 kV
3
5 mm / 72 mm / 38 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-1
24 – 12 24 – 12
32 A 30 A 30 A
1000 V 600 V 600 V
8 kV
3
APFN 2,5 07.312.6755.0 10
TWFN 2,5 07.312.6855.0 10
APFN 2,5 D1/2 07.312.6955.0 10
TWFN 2,5 D1/2 07.312.7055.0 10
APFN 2,5 D2/2 07.312.7155.0 10
TWFN 2,5 D2/2 07.312.7255.0 10
WTP 2,5/4 56.203.0055.0 100
WTP 2,5/4 BLAU 56.203.0055.6 100
WTP 2,5/4 D1/2 56.203.5055.0 100
WTP 2,5/4 D1/2 BLAU 56.203.5055.6 100
WTP 2,5/4 D2/2 56.203.5155.0 100
WTP 2,5/4 D2/2 BLAU 56.203.5155.6 100
114
fasis
• Feed-through block with push-in connection for
mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Duo feed-through block with push-in connection
for mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Duo feed-through block with push-in connection
for mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Feed-through blocks with push-in connection
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 –20 Z7.280.8027.0 20
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
WTP 6/10
8 mm / 58 mm / 44 mm
12 mm
Ea
IEC UL CSA ?
EN 60 947-7-1
22 – 8 22 – 8
57 A 50 A 50 A
1000 V 600 V 600 V
8 kV
3
AP WTP 6/10 07.313.4155.0 10
TW WTP 6/10 07.313.4255.0 10
WTP 6/10 56.206.0055.0 100
WTP 6/10 BLAU 56.206.0055.6 100
IVB WKFN 6 – 2 Z7.282.5227.0 10
IVB WKFN 6 – 3 Z7.282.5327.0 10
IVB WKFN 6 – 4 Z7.282.5427.0 10
IVB WKFN 6 – 5 Z7.282.5527.0 10
IVB WKFN 6 – 10 Z7.282.6027.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,8x4 06.502.4100.0 5
115
fasis
Accessories for WTP 2,5/4...
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
20 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WTP...
Feed-through blocks with push-in connection
• Feed-through block with push-in connection for
mounting on TS 35
• Nominal cross section 10 mm2
Description Type Part No. Std. Pack
Feed-through block, gray
Feed-through block, blue
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.,2 – 10 mm2
Cross section solid/stranded 0.2 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories for WTP 6/10...
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
Test plug
Screwdriver, uninsulated
WTP 2,5/4 PE
WTP 2,5/4 D1/2/PE
WTP 2,5/4 D2/2/PE
5 mm / 47 mm / 38 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-2
24 – 12 24 – 12
1000 V 600 V 600 V
8 kV
3
5 mm / 60 mm / 38 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-2
24 – 12 24 – 12
1000 V 600 V 600 V
8 kV
3
5 mm / 72 mm / 38 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-2
24 – 12 24 – 12
1000 V 600 V 600 V
8 kV
3
APFN 2,5 07.312.6755.0 10
TWFN 2,5 07.312.6855.0 10
APFN 2,5 D1/2 07.312.6955.0 10
TWFN 2,5 D1/2 07.312.7055.0 10
APFN 2,5 D2/2 07.312.7155.0 10
TWFN 2,5 D2/2 07.312.7255.0 10
WTP 2,5/4 PE 56.203.9055.0 100
WTP 2,5/4 D1/2/PE 56.203.9355.0 100
WTP 2,5/4 D2/2/PE 56.203.9155.0 100
116
fasis
Ground blocks with push-in connection
• Ground block with push-in connection for
mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Ground block, green/yellow
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Duo ground block with push-in connection for
mounting on TS 35
• Nominal cross section 4 mm2
• Duo ground block with push-in connection for
mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Description Type Part No. Std. Pack
Ground block, green/yellow
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
WTP 6/10 PE
8 mm / 58 mm / 44 mm
12 mm
Ea
IEC UL CSA ?
EN 60 947-7-2
22 – 8 22 – 8
1000 V 600 V 600 V
8 kV
3
AP WTP 6/10 07.313.4155.0 10
TW WTP 6/10 07.313.4255.0 10
WTP 6/10 PE 56.206.9055.0 100
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 –20 Z7.280.8027.0 20
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
IVB WKFN 6 – 2 Z7.282.5227.0 10
IVB WKFN 6 – 3 Z7.282.5327.0 10
IVB WKFN 6 – 4 Z7.282.5427.0 10
IVB WKFN 6 – 5 Z7.282.5527.0 10
IVB WKFN 6 – 10 Z7.282.6027.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,8x4 06.502.4100.0 5
117
fasis
Ground blocks with push-in connection
• Ground block with push-in connection for
mounting on TS 35
• Nominal cross section 10 mm2
Description Type Part No. Std. Pack
Ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 10 mm2
Cross section solid/stranded 0.2 – 10 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Accessories for WTP 2,5/4...
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
20 pole
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
Accessories for fasis WTP...
Accessories for WTP 6/10...
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
10 pole
Test plug
Screwdriver, uninsulated
WTP 2,5/4 E
WTP 2,5/4 E VB
WTP 2,5/4 E PE
5 mm / 82 mm / 48 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-1
24 – 12 24 – 12
24 A 20 A 20 A
500 V 300 V 300 V
6 kV
3
5 mm / 82 mm / 48 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-2
24 – 12 24 – 12
24 A 20 A 20 A
500 V 600 V 600 V
6 kV
3
5 mm / 82 mm / 48 mm
11 mm
Ea
IEC UL CSA ?
EN 60 947-7-2
24 – 12 24 – 12
500 V 600 V 600 V
6 kV
3
APFN 2,5 E 07.312.7355.0 10
TWFN 2,5 E 07.312.7455.0 10
BT 5/2 04.243.0855.0 100
APFN 2,5 E 07.312.7355.0 10
TWFN 2,5 E 07.312.7455.0 10
BT 5/2 04.243.0855.0 100
APFN 2,5 E 07.312.7355.0 10
WTP 2,5/4 E 56.203.7055.0 100
WTP 2,5/4 E VB 56.203.6955.1 100
WTP 2,5/4 E PE 56.203.8955.0 100
118
fasis
Multi-tier blocks with push-in connection
• Multi-tier block with push-in connection for
mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Multi-tier block, gray
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Marking tag carrier, 2-fold
Accessories
Type Part No. Std. Pack
End plate, gray
Partition, gray
Marking tag carrier, 2-fold
Accessories
Type Part No. Std. Pack
End plate, gray
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Description Type Part No. Std. Pack
Multi-tier block, black
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
• Multi-tier block, vertically connected, with push-in
connection for mounting on TS 35
• Nominal cross section 4 mm2
• Multi-tier ground block with push-in connection
for mounting on TS 35
• Nominal cross section 4 mm2
Description Type Part No. Std. Pack
Multi-tier ground block, green/yellow
General data
Width / length / height, incl. TS 7.5
Wire strip length
Approvals pending
Technical data
Cross section fi ne-stranded 0.2 – 4 mm2
Cross section solid/stranded 0.2 – 4 mm2
Cross section, AWG
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
IVB WKF 2,5 –20 Z7.280.8027.0 20
IVB WKF V Z7.261.1127.0 20
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/2 GRAU 05.564.3855.0 100
LELN 2,5/3 SCHWARZ 05.564.3955.0 100
PS WKC/F Z1.299.9753.0 10
ST 2/2,3 Z5.553.2921.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
119
fasis
Accessories for fasis WTP 2,5/4...
Accessories
Type Part No. Std. Pack
Cross connector, insulated 2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
20 pole
Vertical cross connector, insulated
Wire entry guide 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
Test adapter, modular
Test plug
Screwdriver, uninsulated
Screwdriver, uninsulated, MINI
120
Accessories
Accessories
Software
Service
121
Accessories
Accesories and Service
To complement our products, we offer a comprehensive portfolio
of accessories and services for terminal blocks.
Wieland offers a variety of product-specifi c accessories for its
terminal blocks, for example covers and isolating plates as well
as assembly materials such as mounting rails or tools for working
with our products.
Marking solutions such as wieplot and wiemarc for DIN rail
terminal blocks and other components in the control cabinet, the
planning software wieplan for design of rail assemblies, and
our value-add service for rail assemblies, all make working with
Wieland DIN rail terminal blocks effortless, and achieve a true
added value.
SKN1,5-6,5 Z2.803.1328.0 10
SKN5-11 Z2.803.1428.0 10
SKN10-17 Z2.803.1528.0 10
SKN16-24 Z2.803.1628.0 10
SKN...
SKN1,5-6,5 8-13 N 10 mm 25 mm
SKN5-11 22-31 N 17 mm 25 mm 41 mm
SKN10-17 32-58 N 23 mm 25 mm 57 mm
SKN16-24 37-53 N 30 mm 25 mm 71 mm
122
Accessories
Shielded cable terminals, type SKN
• Shielded cable terminals
• Material: nickel-plated brass
Shielded cable terminals
Shielded cable terminals
Shielded cable terminals
Shielded cable terminals
Description Type Part No. Std. Pack
Type Clamping B L Hmax
(shielded cable diameter)
33,5 mm
With the SKN shielding connection clamps for our
rail terminal blocks, we offer the ability to connect
shielded cables and wires in the control cabinet to
the grounding system in a safe and easy manner.
• Mounting directly in front of the terminal blocks through use
of a rail holder that attaches to the mounting rail
• Mounting on insulated rail holders independent of the DIN
mounting rail, inside the control cabinet
• Easy and secure contact without damaging the shield
• Stainless spring steel compression clamp ensures
continuous and consistent contact
• High corrosion resistance of contact parts
• Spring clamping yoke available in various sizes
• Plastic rail holder for insulated rail mounting
The system
Application
WE SH 1/35 Z5.515.3310.0 20
WE SH 2/35 Z5.515.3410.0 20
WE SH 3/35 Z5.519.0310.0 25
WE SH 4/35 Z5.519.0410.0 25
SKN SH/35/F Z1.980.0153.0 10
WAK 35/4GN 30.494.4210.7 10
18 x 3MSN 98.291.1000.0 10
WE SH 1/35
WE SH 2/35
WE SH 3/35
WE SH 4/35
SKN SH/35/F
WAK 35/4GN
123
Accessories
• Tin-plated steel
• Plastic, black
Accessories
Type Part No. Std. Pack
Busbar support (one-sided), tin-plated steel
Busbar support (two-sided), tin-plated steel
Busbar support (one-sided), tin-plated steel
Busbar support (two-sided), tin-plated steel
Busbar support plastic, black
Accessories
Type Part No. Std. Pack
Ground terminal, tin-plated steel green-yellow
Busbar, Cu tin-plated ,18x3 mm L = 1 m
Busbar support
Accessories
35 x 27 x 7,5 EN 60715 98.300.0000.0 1
35 x 27 x 7,5 EN 60715 98.300.1000.0 1
35 x 27 x 7,5 EN 60715 98.300.0010.0 1
35 x 27 x 15 EN 60715 98.370.0000.0 1
35 x 27 x 15 EN 60715 98.370.1000.0 1
35 x 27 x 15 EN 60715 98.375.1000.0 1
35 x 27 x 15 EN 60715 98.370.1001.0 1
35 x 24 x 15 EN 60715 98.360.0000.0 1
35 x 24 x 15 EN 60715 ZN 98.360.0004.0 1
35 x 24 x 15 EN 60715 CU 98.380.0000.0 10
124
Accessories
Mounting rails
Mounting rail 35 x 7,5
according to DIN EN 60 715
• Length 2 m
Mounting rail 35 x 15
according to DIN EN 60 715
• Length 2 m
Mounting rail 35 x 15
according to DIN EN 60 715
• Length 2 m
Steel, galv. zinc-plated and dichromated
unslotted
Steel, galv. zinc-plated and dichromated
slotted
Steel, unplated unslotted
Steel, galv. zinc-plated and dichromated
unslotted
Steel, galv. zinc-plated and dichromated
slotted
Steel, galv. zinc-plated and dichromated
slotted
Steel, V2A slotted
Steel, galv. zinc-plated and dichromated
unslotted
Steel, hot-galvanized unslotted
E-copper unslotted
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
9018 D Z5.516.2511.0 50
9018 H Z5.516.2711.0 50
9018 N Z5.516.2811.0 50
9021 / 15 x 5,5 EN 60715 98.090.0015.0 10
9021 / 15 x 5,5 EN 60715 98.090.0000.0 1
9006 EN 60715 G-32 98.190.0000.0 1
9006 EN 60715 G-32 98.190.1000.0 1
9006 E-CU 98.220.0000.0 10
9006 AL 98.210.0000.0 1
125
Accessories
Mounting rail 15 x 5,5
according to DIN EN 60 715
• Length 2 m
Mounting rail 15 x 5,5
according to DIN EN 60 715
• Length 2 m
Accessories
Type Part No. Std. Pack
Angled support bracket with mounting material
Angled support bracket with mounting material
Angled support bracket with mounting material
Accessories
Steel, galv. zinc-plated and dichromated
unslotted
Steel, galv. zinc-plated and dichromated
slotted
Steel, galv. zinc-plated and dichromated
unslotted
Steel, galv. zinc-plated and dichromated
slotted
E-copper unslotted
Aluminium unslotted
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
BS/R Z4.243.8453.0 100
04.019.0289.0 10
04.243.8550.0 10
04.019.1189.0 10
04.019.0289.0 10
WEF 2 /35 Z5.523.9453.0 100
WEF 1 /35 Z5.523.9353.0 100
WEF 1 BS /35 69.920.1053.0 100
WEF 1 BSS /35 69.920.1253.0 100
9708/2 S 35 Z5.522.8553.0 100
9708/2 BS 35 69.920.0553.0 100
126
Accessories
End clamps
End clamp TS 35 5 mm wide
End clamp TS 35 8 mm wide
End clamp TS 35 17,5 mm wide
with marking facilities
End clamp TS 35 8 mm wide
with marking facilities
End clamp TS 35 8 mm wide
End clamp TS 35 17,5 mm wide
End clamp for TS 35
snap-on mounting
End clamp for TS 35
snap-on mounting
End clamp for TS 35
screw mounting
Accessories
Type Part No. Std. Pack
Marking tag for WEF 1 / 35 wide
Marking cardboard in perforated sheets 100 tags/sh.
Marking tag for WEF 1 / 35 small
Marking cardboard in perforated sheets small
Accessories
Type Part No. Std. Pack
Marking cardboard in perforated sheets 100 tags/sh.
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
04.019.0289.0 10
9208 S 15 Z5.522.7553.0 100
9222 S 15 Z5.522.5010.0 100
WE 1 /U Z5.523.5753.0 100
WE 1 BS /U 69.920.0753.0 100
WE 2 /U Z5.523.5653.0 100
WE 2 BS /U 69.920.0653.0 100
127
Accessories
End clamp, plastic 7,5 mm wide
End clamp, steel 5 mm wide
End clamp with U-foot 10 mm wide
End clamp with U-foot 17,5 mm wide
with marking facilities
End clamp with U-foot 10 mm wide
End clamp with U-foot 17,5
mm wide
with marking facilities
End clamp for TS 15
screw mounting
End clamp with with U-foot
screw mounting
Accessories
Type Part No. Std. Pack
Marking cardboard in perforated sheets 100 tags/sh.
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
wieplot
wiemarc
selos –
fasis
128
Accessories
Individual marking of DIN rail terminal blocks means wiemarc
and wieplot at Wieland Electric. The wiemarc software was
developed to provide you with maximum flexibility in marking
your terminal block assemblies. Together with the wieplot
plotter you have a powerful marking system that enables
you to work professionally from the individual marking tag
to series marking of your terminal block assemblies. You feel
confident with the system due to its easy handling and visual
representation of your marking, even when you use it for
the first time.
But wieplot offers even more!
In addition to the marking tags for DIN rail terminal blocks you
can also print self-adhesive tags and labels or cable markings.
A slight modification can even make your plotter a powerful
engraving system.
Marking with a system
• Individual marking of all terminal blocks for clear wire/
termination point assignment
• One single marking system for all designs
• Marking of individual tags; marking strips that correspond to
the exact widths of the terminal blocks; or group markings
• Individual planning of terminal block assemblies and markings
with wieplan
Ready for universal use
• Marks all common marking systems available for DIN rail
terminal blocks
• Different marking tags can be marked individually
in one single work step
• Marking of labels, self-adhesive tags and cables is possible
Easy and quick
• Simple and intuitive user interface
• Direct graphical display of the marking tags including
plausibility check
• Customized layouts can be created individually
• Data import from CAD, Excel, text or wieplan fi les
Durable and safe – wieplot engraving system
• Easy modifi cation to wieplot to make it an engraving system
• Engraving of multi-layer plastic boards
• Clean and dust-proof operation due to integrated vacuum device
• Create individual layouts using wiemarc
wieplot
engraving system
Configuration and marking systems
marcom 2 95.502.0000.0 1
wieplot 500 95.502.0604.0 1
wieplot BASIC 95.502.0607.0 1
wieplot 500 E-UNIT 95.502.0700.0 1
95.502.0118.0
95.502.0125.0
95.502.0135.0
95.502.0150.0
95.502.0170.0
95.502.0100.0
95.502.0125.1
95.502.0135.1
95.502.0225.1
95.502.0235.1
95.502.0199.0
95.502.0198.0
95.502.0197.0
95.502.0612.0
95.502.0613.0
95.502.0620.0
95.502.0627.0
95.502.0628.0
95.502.0710.0 1
95.502.0710.2 1
95.502.0710.3 1
95.502.0710.4 1
95.502.0710.5 1
95.502.0710.7 1
95.502.0711.0 1
95.502.0625.0 1
129
Accessories
Marking computer
marcom 2
Marking computer
Description Type Part No. Std. Pack
Contents: Marking computer in case, european power supply unit, power pack, data cassette with job
memory, marking tag carrier, plotter pen, 0.25 mm, cleaning set
Description:
marcom 2 is a freely programmable marking computer for DIN rail terminal blocks, pluggable
connectors, switching devices and cables. The computer provides of a large number of fonts, with
numerical and alphanumerical characters and symbols. marcom 2 is portable and can be used at any
location; it can be operated either using the mains or batteries.
Technical data:
Operator panel: 190 mm x 45 mm
Resolution: 0.01 mm
Power supply unit: 50 / 60 Hz, 100 - 230 V
Output voltage: 9.5 V (150 mV / 1.4 VA) – 14 V (450 mA / 6.3 VA)
Replaceable battery: 16.8 V (14 NiCd-Zellen)
Dimensions: 380 mm x 190 mm x 63 mm
Weight: 6.2 kg
Plotter system
wieplot
Complete package
Complete package
Description Type Part No. Std. Pack
Contents: Plotter wieplot, data cable and manual, 4 receptacles (wieplot 500) / 2 receptacles
(wieplot BASIC) for WSB (Wieland standard marking system), accessories kit, wiemarc software
Description:
With wiemarc you can create customized marking data on your PC. These can then be output on the
wieplot plotter system to various marking plates.
Technical data:
Resolution: 0.01 mm
Accuracy: + / – 0.05 mm
Power supply unit: 50 / 60 Hz, 100 - 240 V
Output voltage: 24 V DC 1.4 A
Current input: app. 0.3 A at 220 V
Approval: UL-UL1950, CSA 950, VDE EN 60950
Radio interf. suppr.: FCC class B, FCC sect. 15 and VDE class B
Dim. / Weight: 660 mm x 440 mm x 125 mm / 8 kg (wieplot 500)
Interfaces: USB Level 1.1, parallel
Accessories for
wieplot
Plotter pens for wieplot
Part No.
Plotter pen 0.18 mm
Plotter pen 0.25 mm
Plotter pen 0.35 mm
Plotter pen 0.50 mm
Plotter pen 0.70 mm
Plotter pen 1.00 mm
Dispos plotter pen 0.25 mm
Dispos plotter pen 0.35 mm
Dispos plotter pen-D ED 0.25 mm
Dispos plotter pen-D ED 0.35 mm
Type Part No.
Ink cartridge P2.0, 5 x1ml
Cleaning set
Pen cleaner
Dust protection hood
Service kit – pen station
Seal inserts kit
Receptacles for marking plates
Type Part No.
Receptacle for WSB
Receptacle for BZ/WKF 15,
Receptacle for BZ/WKF 1,5/10
Engraving unit for
wieplot 500
Description Type Part No. Std. Pack
Contents: Engraving spindle, engraving head (with fuse and counter bearing), control unit wieplot VEC 500,
vacuum cleaner wieplot VC 500, connection cables
Description:
The wieplot 500 E-UNIT engraving unit has been designed for use with the wieplot 500 plotter. The system is
set up for engraving multi-layer plastic tags. The Plotboard A4 in a 297 x 202 mm format is the receptacle for
marking paper sheets and labels and also enables engraving of plastic boards.
Accessories
Type Part No. Std. Pack
Graver SET, complete SET
Graver 0.2 mm
Graver 0.3 mm
Graver 0.4 mm
Graver 0.5 mm
Graver 0.7 mm
Graver 1.0 mm
Receptacle Plottboard A4
Engraving unit
9075 A/5/10/11 Z4.242.5053.0 10
9705 AL/5/10/6 Z4.242.5153.0 10
9075 A/6/10/11 Z4.242.6053.0 10
9705 AL/6/10/6 Z4.242.6153.0 10
9075 A/8/10/7 Z4.242.8053.0 10
9705 A 04.242.0850.0 500
9705 AL 04.242.1553.0 500
9705 AB 04.842.0850.0 500
9705 ALB 04.842.1553.0 500
9705 A/5/10 04.242.5053.0 25
1 – 9 9705A/5/9 B 1 - 9 04.842.4953.0 25
*)9705A/5/10 B 04.842.5053.0 25
1 – 10 9705A/5/10 B 1 - 10 04.845.0153.0 25
11 – 20 9705A/5/10 B 11 - 20 04.845.0253.0 25
21 – 30 9705A/5/10 B 21 - 30 04.845.0353.0 25
31 – 40 9705A/5/10 B 31 - 40 04.845.0453.0 25
41 – 50 9705A/5/10 B 41 - 50 04.845.0553.0 25
51 – 60 9705A/5/10 B 51 - 60 04.845.0653.0 25
61 – 70 9705A/5/10 B 61 - 70 04.845.0753.0 25
71 – 80 9705A/5/10 B 71 - 80 04.845.0853.0 25
81 – 90 9705A/5/10 B 81 - 90 04.845.0953.0 25
91 – 100 9705A/5/10 B 91 - 100 04.845.1053.0 25
g (10x) 9705A/5/10B SLZ 04.855.0053.0 25
q (10x) 9705A/5/10B ERDZ 04.855.0153.0 25
+ (10x) 9705A/5/10 B + 04.855.0253.0 25
– (10x) 9705A/5/10 B - 04.855.0353.0 25
L1 (10x) 9705A/5/10B L1 04.855.0453.0 25
L2 (10x) 9705A/5/10B L2 04.855.0553.0 25
L3 (10x) 9705A/5/10B L3 04.855.0653.0 25
PE (10x) 9705A/5/10B PE 04.855.0753.0 25
SL (10x) 9705A/5/10B SL 04.855.3153.0 25
N (10x) 9705A/5/10B N 04.855.3253.0 25
F1 (10x) 9705A/5/10B F1 04.855.0953.0 25
F2 (10x) 9705A/5/10B F2 04.855.1053.0 25
L1,L2,L3,N,PE (10x) 9705A/5/10B L1L2L3NPE.. 04.855.0853.0 25
9705 AL/5/10 04.242.5153.0 25
130
Accessories
Marking accessories
Marking plates
• For marcom 2 marking computer
• For wieplot 500 plotter system
Single marking tag
All blocks /
5 mm wide and larger
*) Custom marking upon request
Marking strips
2,5 mm2
/ 5 mm wide
*) Custom marking upon request
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Unmarked
Width 5 x 8.3 mm 110 tags per plate
Width 5 x 14 mm 60 tags per plate
Width 6 x 8.3 mm 110 tags per plate
Width 6 x 14 mm 60 tags per plate
Width 8 x 8.3 mm 70 tags per plate
Unmarked
Width 5 x 8.3 mm
Width 5 x 14 mm
Marked
Width 5 x 8.3 mm *)
Width 5 x 14 mm *)
Unmarked
Marked
With enlarged marking area
9705 A/6/10 04.242.6053.0 25
1 – 9 9705A/6/9 B 1 - 9 04.842.5953.0 25
*)9705A/6/10 B 04.842.6053.0 25
1 – 10 9705A/6/10 B 1 - 10 04.846.0153.0 25
11 – 20 9705A/6/10 B 11 - 20 04.846.0253.0 25
21 – 30 9705A/6/10 B 21 - 30 04.846.0353.0 25
31 – 40 9705A/6/10 B 31 - 40 04.846.0453.0 25
41 – 50 9705A/6/10 B 41 - 50 04.846.0553.0 25
51 – 60 9705A/6/10 B 51 - 60 04.846.0653.0 25
61 – 70 9705A/6/10 B 61 - 70 04.846.0753.0 25
71 – 80 9705A/6/10 B 71 - 80 04.846.0853.0 25
81 – 90 9705A/6/10 B 81 - 90 04.846.0953.0 25
91 – 100 9705A/6/10 B 91 - 100 04.846.1053.0 25
g (10x) 9705A/6/10 B SLZ 04.856.0053.0 25
q (10x) 9705A/6/10 B ERDZ 04.856.0153.0 25
+ (10x) 9705A/6/10 B + 04.856.0253.0 25
– (10x) 9705A/6/10 B - 04.856.0353.0 25
L1 (10x) 9705A/6/10 B L1 04.856.0453.0 25
L2 (10x) 9705A/6/10 B L2 04.856.0553.0 25
L3 (10x) 9705A/6/10 B L3 04.856.0653.0 25
PE (10x) 9705A/6/10 B PE 04.856.0753.0 25
SL (10x) 9705A/6/10 B SL 04.856.3153.0 25
N (10x) 9705A/6/10 B N 04.856.3253.0 25
F1 (10x) 9705A/6/10 B F1 04.856.0953.0 25
F2 (10x) 9705A/6/10 B F2 04.856.1053.0 25
L1,L2,L3,N,PE (10x) 9705A/6/10 B L1L2L3NPE.. 04.856.0853.0 25
9705 AL/6/10 04.242.6353.0 25
9705 A/8/10 04.242.8053.0 25
1 – 9 9705A/8/9 B 1 - 9 04.842.7953.0 25
*)9705A/8/10 B 04.842.8053.0 25
1 – 10 9705A/8/10 B 1 - 10 04.848.0153.0 25
11 – 20 9705A/8/10 B 11 - 20 04.848.0253.0 25
21 – 30 9705A/8/10 B 21 - 30 04.848.0353.0 25
31 – 40 9705A/8/10 B 31 - 40 04.848.0453.0 25
41 – 50 9705A/8/10 B 41 - 50 04.848.0553.0 25
51 – 60 9705A/8/10 B 51 - 60 04.848.0653.0 25
61 – 70 9705A/8/10 B 61 - 70 04.848.0753.0 25
71 – 80 9705A/8/10 B 71 - 80 04.848.0853.0 25
81 – 90 9705A/8/10 B 81 - 90 04.848.0953.0 25
91 – 100 9705A/8/10 B 91 - 100 04.848.1053.0 25
g (10x) 9705A/8/10 B SLZ 04.858.0053.0 25
q (10x) 9705A/8/10 B ERDZ 04.858.0153.0 25
+ (10x) 9705A/8/10 B + 04.858.0253.0 25
– (10x) 9705A/8/10 B - 04.858.0353.0 25
L1 (10x) 9705A/8/10 B L1 04.858.0453.0 25
L2 (10x) 9705A/8/10 B L2 04.858.0553.0 25
L3 (10x) 9705A/8/10 B L3 04.858.0653.0 25
PE (10x) 9705A/8/10 B PE 04.858.0753.0 25
SL (10x) 9705A/8/10 B SL 04.858.3153.0 25
N (10x) 9705A/8/10 B N 04.858.3253.0 25
F1 (10x) 9705A/8/10 B F1 04.858.0953.0 25
F2 (10x) 9705A/8/10 B F2 04.858.1053.0 25
L1,L2,L3,N,PE (10x) 9705A/8/10 B L1L2L3NPE.. 04.858.0853.0 25
9705 A/5/10/5 B 04.842.5553.0 25
9705 A/6/10/5 B 04.842.6553.0 25
9705 A/8/10/5 B 04.842.8553.0 25
9705 A/8/10/5 B 04.842.8553.0 25
131
Accessories
Marking strips
4
mm2
/ 6 mm wide
*) Custom marking upon request
Marking strips
6
mm2
/ 8 mm wide
*) Custom marking upon request
Marking strips
10 mm2
/ 10 mm wide
16 mm2
/ 12 mm wide
35 mm2
/ 16 mm wide
70 mm2
/ 24 mm wide
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Unmarked
Marked
With enlarged marking area
Unmarked
Marked
Description Type Part No. Std. Pack
10 mm2 / 10 mm wide for 5 blocks
16 mm2 / 12 mm wide for 5 blocks
35 mm2 / 16 mm wide for 5 blocks
70 mm2 / 24 mm wide for 4 blocks
Specify required marking with part no.
9704 A 04.241.1150.0 25
9704 A/1 B 04.841.1150.0 25
9704 A/2 B 04.841.1250.0 25
9704 A/3 B 04.841.1350.0 25
9704 A/4 B 04.841.1450.0 25
9704 A/5 B 04.841.1550.0 25
9704 A/6 B 04.841.1650.0 25
9704 A/7 B 04.841.1750.0 25
9704 A/8 B 04.841.1850.0 25
9704 A/9 B 04.841.1950.0 25
9704 A/0 B 04.841.2050.0 25
9704 A/1-0 B 04.841.2150.0 25
9704 A/+ 04.841.7450.0 25
9704 A/- 04.841.7550.0 25
9704 A// 04.841.7650.0 25
9704 A/. 04.841.7750.0 25
04.841.9050.0 1
9704 A /AG B 04.841.2250.0 25
9704 A /BG B 04.841.2350.0 25
9704 A /CG B 04.841.2450.0 25
9704 A /DG B 04.841.2550.0 25
9704 A /EG B 04.841.2650.0 25
9704 A /FG B 04.841.2750.0 25
9704 A /GG B 04.841.2850.0 25
9704 A /HG B 04.841.2950.0 25
9704 A /IG B 04.841.3050.0 25
9704 A /JG B 04.841.3150.0 25
9704 A /KG B 04.841.3250.0 25
9704 A /LG B 04.841.3350.0 25
9704 A /MG B 04.841.3450.0 25
9704 A /NG B 04.841.3550.0 25
9704 A /OG B 04.841.3650.0 25
9704 A /PG B 04.841.3750.0 25
9704 A /QG B 04.841.3850.0 25
9704 A /RG B 04.841.3950.0 25
9704 A /SG B 04.841.4050.0 25
9704 A /TG B 04.841.4150.0 25
9704 A /UG B 04.841.4250.0 25
9704 A /VG B 04.841.4350.0 25
9704 A /WG B 04.841.4450.0 25
9704 A /XG B 04.841.4550.0 25
9704 A /YG B 04.841.4650.0 25
9704 A /ZG B 04.841.4750.0 25
04.841.9150.0 1
9704 A /AK B 04.841.4850.0 25
9704 A /BK B 04.841.4950.0 25
9704 A /CK B 04.841.5050.0 25
9704 A /DK B 04.841.5150.0 25
9704 A /EK B 04.841.5250.0 25
9704 A /FK B 04.841.5350.0 25
9704 A /GK B 04.841.5450.0 25
9704 A /HK B 04.841.5550.0 25
9704 A /IK B 04.841.5650.0 25
9704 A /JK B 04.841.5750.0 25
9704 A /KK B 04.841.5850.0 25
9704 A /JK B 04.841.5950.0 25
9704 A /MK B 04.841.6050.0 25
9704 A /NK B 04.841.6150.0 25
9704 A /OK B 04.841.6250.0 25
9704 A /PK B 04.841.6350.0 25
9704 A /QK B 04.841.6450.0 25
9704 A /RK B 04.841.6550.0 25
9704 A /SK B 04.841.6650.0 25
9704 A /TK B 04.841.6750.0 25
9704 A /UK B 04.841.6850.0 25
9704 A /VK B 04.841.6950.0 25
9704 A /WK B 04.841.7050.0 25
9704 A /XK B 04.841.7150.0 25
9704 A /YK B 04.841.7250.0 25
9704 A /ZK B 04.841.7350.0 25
04.841.9250.0 1
132
Accessories
Marking accessories
Tear-off marking strips
marked with numbers
• With 10 marking tags
• For single symbol marking
Description Type Part No. Std. Pack
Unmarked
Marked with the same number
1
2
3
4
5
6
7
8
9
0
Marked with consecutive numbers
1-0
Marked with the same symbols
+
–
/
.
Set, marked with same numbers (= 10 x 25 strips = 2.500 numbers)
111 up to 000
Tear-off marking strips
marked with upper case letters
• With 10 marking tags
• For single symbol marking
Tear-off marking strips
marked with lower case letters
• With 10 marking tags
• For single symbol marking
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Marked with the same upper case letters
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Set, marked with same upper case letters (= 26 x 25 strips = 6.500 numbers)
A up to Z GB
Marked with the same lower case letters
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
Set, Marked with the same lower case letters (= 26 x 25 strips = 6.500 numbers)
a up to z KB
S0 1/5 04.900.2053.0 1
9705 A/5/10 B 04.855.1153.0 1
9705 A/5/10 B 04.855.1253.0 1
S0 1/6 04.900.3053.0 1
9705 A/6/10 B 04.856.1153.0 1
9705 A/6/10 B 04. .1253.0 1
S0 1/8 04.900.4053.0 1
9705 A/8/10 B 04.858.1153.0 1
9705 A/8/10 B 04.858.1253.0 1
S0 1/0 04.900.1053.0 1
S0 1 04.900.0000.0 1
9705 A/4 04.242.0950.0 200
9705 A/6 04.242.1250.0 200
9705 A/4 W 04.242.2853.0 200
Z7.311.1755.0 10
Z7.311.2755.0 10
Z7.311.7055.0 10
04.019.0289.0 10
133
Accessories
Assortment box
• For marking material
Marking tag carrier
• For all blocks
Partition
• With marking facilities
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
Assortment box for 5 mm width
Assortment for 5 mm width 1-100
101-200
Assortment box for 6 mm width
Assortment for 6 mm width 1-100
101-200
Assortment box for 8 mm width
Assortment for 8 mm width 1-100
101-200
Assortment box for tear-off marking tags
with 50 digits each
Assortment box, empty
Marking tag carrier, 4 digits
Marking tag carrier, 6 digits
Marking tag carrier, 45° angle
Partition with carrier for marking tags
for TS 32 and TS 35
for TS 15
Partition with carrier for marking cards
for TS 32 and TS 35
Accessories
Marking card in perforated sheets 100 tags/sheets
IVB WKF 1,5-2 Z7.260.0227.0 10
IVB WKF 1,5-3 Z7.268.0327.0 10
IVB WKF 1,5-4 Z7.268.0427.0 10
IVB WKF 1,5-5 Z7.268.0527.0 10
IVB WKF 1,5-10 Z7.268.1027.0 10
IVB WKF 1,5-20 Z7.268.2027.0 10
IVB WKF 2,5-2 Z7.280.6227.0 10
IVB WKF 2,5-3 Z7.280.6327.0 10
IVB WKF 2,5-4 Z7.280.6427.0 10
IVB WKF 2,5-5 Z7.280.6527.0 10
IVB WKF 2,5-6 Z7.280.6627.0 10
IVB WKF 2,5-7 Z7.280.6727.0 20
IVB WKF 2,5-8 Z7.280.6827.0 20
IVB WKF 2,5-9 Z7.280.6927.0 20
IVB WKF 2,5-10 Z7.280.7027.0 20
IVB WKF 2,5-20 Z7.280.8027.0 20
IVB WKF-V Z7.261.1127.0 10
IVB WKF 4-2 Z7.261.1227.0 10
IVB WKF 4-3 Z7.261.1327.0 10
IVB WKF 4-4 Z7.261.1427.0 10
IVB WKF 4-5 Z7.261.1527.0 10
IVB WKF 4-6 Z7.261.1627.0 10
IVB WKF 4-7 Z7.261.1727.0 10
IVB WKF 4-8 Z7.261.1827.0 10
IVB WKF 4-9 Z7.261.1927.0 10
IVB WKF 4-10 Z7.261.2027.0 10
IVB WKFN 6-2 Z7.282.5227.0 10
IVB WKFN 6-5 Z7.282.5527.0 10
IVB WKF 10-2 Z7.283.8227.0 10
IVB WKF 16-2 Z7.284.4227.0 10
IVB WKF 35-2 Z7.285.6227.0 10
IVB WKF 35R10-2 Z7.285.6427.0 10
99.013.9999.9 10
99.014.9999.9 10
99.015.9999.9 10
99.031.9999.9 10
99.032.9999.9 10
99.033.9999.9 10
99.034.9999.9 10
IVB 0,5 WK 4-2 Z7.255.0227.0 10
IVB 0,5 WK 4-12 Z7.255.0227.0 10
IVB 1 WK 4-2 Z7.255.4227.0 10
IVB 1 WK 4-12 Z7.255.4227.0 10
IVK WKN 6 TK-2 Z7.255.8227.0 10
IVK WKN 6 TK-3 Z7.255.8327.0 10
IVK WKN 6 TK-4 Z7.256.8427.0 10
IVK WKN 6 TK-5 Z7.256.8527.0 10
IVK WKN 6 TK-6 Z7.256.8527.0 10
134
Accessories
Cross connectors and jumper bars
Cross connectors
• Cross connector poles can be individually
removed.
• When cross connectors with removed poles are
used, the rated voltage is reduced to 400 V.
• You can cut a 10-wire connector plug in half to
form two 5-wire connector plugs, but an end cover
plate or isolating plate must then be inserted.
1.5 mm
2
, 4 mm wide
2.5 mm
2
, 5 mm wide
4 mm
2
, 6 mm wide
6 mm
2
, 8 mm wide
10 mm
2
, 10 mm wide
16 mm
2
, 12 mm wide
35 mm
2
, 16 mm wide
Jumping cross connectors for WT 2,5, WTP 2,5/4 and WKFN 2,5
3 pole 1-3
4 pole 1-4
5 pole 1-5
5 pole 1 to 3 to 5
7 pole 1 to 3, 5 and 7
9 pole 1 to 3, 5, 7 and 9
11 pole 1 to 3, 5, 7, 9 and 11
Additional combinations upon request
Description Type Part No. Std. Pack
Jumper bar, insulated
Jumper comb, insulated
WK 4 / U and WK 4 TK, 6 mm
wide
, 0.5 mm thick
Jumper comb, insulated
WK 4 / U and WK 4 TK, 6 mm
wide
, 1 mm thick
Jumper comb, insulated
WK 6, WKN 6 TK, WK 4 THSi 6,3x32
Jumper comb, insulated
Description Type Part No. Std. Pack
ADF 1,5/5 GELB 04.343.6953.8 10
ADFN 2,5/4 GELB 04.343.8353.8 10
ADF 4/4 GELB 04.343.6153.8 10
ADF 6/4 GELB 04.343.6253.8 10
ADF 10/4 GELB 04.343.6453.8 10
ADF 16/4 GELB 04.343.6653.8 10
ADF 35/5 GELB 04.343.9253.8 10
AD 16/4 GELB 04.343.5256.8 10
AD 24/4 GELB 04.343.5356.8 10
ADN 28/4 GELB 04.343.5456.8 10
PSWKC/F Z1.299.9753.0 10
01.299.9753.0 10
ZP/AP PS 07.312.6053.0 10
ST 2/2 RT Z5.553.2921.0 10
ST 2/2 SW Z5.553.2921.1 50
ST 2/2 BL Z5.553.2921.6 100
ST 2/4 SW Z5.553.3121.0 10
5 mm / 6 mm*
8 mm
IEC UL CSA
400 V
135
Accessories
Cover strip with warning symbol
• Over 4 blocks, tension spring connection
for tension spring connection
1.5 mm
2
, 4 mm wide
2.5 mm
2
, 5 mm wide
4 mm
2
, 6 mm wide
6 mm
2
, 8 mm wide
10 mm
2
, 10 mm wide
16 mm
2
, 12 mm wide
35 mm
2
, 16 mm wide
for screw connection
WKN 35/U, 16 mm wide, screw M5
WKN 70/U, 24 mm wide, screw M6
WKN 150/U, 28 mm wide, screw M8
Description Type Part No. Std. Pack
• Over 4 blocks, screw connection
Test plug with tension spring
connection
• For WKF/WKC terminal blocks
•
For 2.5 mm2, 5 mm wide and
4 mm2, 6 mm wide
Test plug
• 250 V / 2 A
Test plug
Blind piece
Endplate
Test plug 2.3 mm red
Test plug 2.3 mm black
Test plug 2.3 mm blue
Test plug 4 mm black
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Width
Wire strip length
Technical data
Cross section solid 0.13 –1.5 mm2
Cross section fi ne-stranded 0.13 – 1.5 mm2
Rated current 13.5 A
Rated voltage
Note * For 6 mm spacing a ZP/AP PS is snapped on behind each test
plug or blind piece.
Cover strips and test plugs
DIN 5264 A 0,4x2,5 06.502.4300.0 5
DIN 5264 B 0,6x3,5 06.502.4000.0 10
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
DIN 5264 B 0,6x3,5 W 05.502.4100.0 10
DIN 5264 B 0,6x3,5 MW 05.502.4000.0 10
DIN 5264 B 0,6x3,5 06.502.4000.0 10
DIN 5264 B 0,6x3,5 M 06.502.5000.0 10
DIN 5264 B 0,6x3,5 W 05.502.4100.0 10
DIN 5264 B 0,6x3,5 MW 05.502.4000.0 10
DIN 5264 B 0,6x4 06.502.4100.0 5
DIN 5264 B 0,6x4 06.502.4100.0 5
DIN 5264 B 1x5,5 06.502.4200.0 5
DIN 5264 B 1x5,5 06.502.4200.0 5
AKW /A 95.300.0500.0 1
LEL 1,5/1 WEISS 05.564.4253.0 10
LEL 1,5/2 GRAU 05.564.4353.0 10
LELN 2,5/1 WEISS 05.564.3755.0 100
LELN 2,5/1 GRAU 05.564.3855.0 100
LELN 2,5/1 SCHWARZ 05.564.3955.0 100
LEL 4/1 WEISS 05.561.8553.0 100
LEL 4/2 GRAU 05.561.8653.0 100
LEL 4/3 SCHWARZ 05.561.8753.0 100
136
Accessories
Screwdrivers
1.5 mm
2
, 4 mm wide
Uninsulated, long and straight
2.5 mm
2
, 5 mm wide
Uninsulated, long and straight
Uninsulated, short and straight
Uninsulated, long and angled
Uninsulated, short and angled
4 mm
2
, 6 mm wide
Uninsulated, long and straight
Uninsulated, short and straight
Uninsulated, long and angled
Uninsulated, short and angled
6 mm
2
, 8 mm wide
10 mm
2
, 10 mm wide
16 mm
2
, 12 mm wide
35 mm
2
, 16 mm wide
Description Type Part No. Std. Pack
Notching tool
for cross connectors
• For 1.5 mm2, wide 4 mm wide
• For 2.5 mm2, 5 mm wide
• For 4 mm2, 6 mm wide
Notching tool
Description Type Part No. Std. Pack
Tools
Wire entry guides
• For conductors with cross sections smaller
than 1 mm2
1.5 mm
2
, 4 mm wide
for 0.13 – 0.2 mm
2
wires
for 0.25 – 0.5 mm
2
wires
2.5 mm
2
, 5 mm wide
for 0.13 – 0.2 mm
2
wires
for 0.25 – 0.5 mm
2
wires
for 0.75 – 1.0 mm
2
wires
4 mm
2
, 6 mm wide
for 0.13 – 0.2 mm
2
wires
for 0.25 – 0.5 mm
2
wires
for 0.75 – 1.0 mm
2
wires
Description Type Part No. Std. Pack
06.600.2027.0 100
06.600.2127.0 100
06.600.2227.0 100
06.600.2327.0 100
06.600.2427.0 100
06.600.2527.0 100
06.600.2627.0 100
06.600.2727.0 100
06.600.2827.0 100
06.600.2927.0 100
06.600.3027.0 100
06.600.3127.0 100
06.600.3227.0 100
06.600.3327.0 100
06.600.3427.0 100
06.600.3527.0 50
06.600.4027.0 1000
06.600.4127.0 1000
06.600.4227.0 1000
06.600.4327.0 1000
06.600.4427.0 1000
06.600.4527.0 1000
06.600.4627.0 500
06.600.4727.0 500
06.600.4827.0 100
06.600.4927.0 100
06.600.5027.0 100
AIW/A 95.350.0100.0 1
PW/A 95.101.1300.0 1
PW/B 95.101.1100.0 1
PW/C 95.101.1200.0 1
137
Accessories
Ferrules
with insulating material sleeve
• Materials:
Sleeve: Polypropylene, temperature resistance
105 °C, creepage resistant
Tube: E-Cu, galvanically tin-plated
without insulating material sleeve
• Materials: Tube: E-Cu, galvanically tin-plated
Ferrules and tools
Ferrules with insulating material sleeve according to DIN 46 228 T4
0.50 norm. white
0.75 norm. gray
1.00 norm. res
1.50 norm. black
1.50 long black
2.50 norm. blue
2.50 long blue
4.00 norm. gray
4.00 long gray
6.00 norm. yellow
6.00 long yellow
10.00 norm. red
10.00 long red
16.00 norm. blue
16.00 long blue
25.00 mid-length yellow
Ferrules without insulating material sleeve according to DIN 46 228 T1
0.50 norm.
0.75 norm.
1.00 norm.
1.50 norm.
2.50 norm.
4.00 norm.
6.00 norm.
10.00 norm.
16.00 norm.
25.00 norm.
35.00 norm.
Cross section mm2Color Type Part No. Std. Pack
Wire strippers
Wire strippers
Pressing tool A Length: 180 mm
Pressing tool B Length: 203 mm
Pressing tool C Length: 203 mm
Description Type Part No. Std. Pack
Description Type Part No. Std. Pack
General data
Wire strip length 0.08 - 10 mm2
Cross section, AWG 28 - 7
General data
A: Wire strip length 0.08 - 10 mm2
A: Cross section, AWG 28 - 7
B: Wire strip length 10 - 25 mm2
B: Cross section, AWG 7 - 4
C: Wire strip length 35 - 50 mm2
C: Cross section, AWG 2 - 1/0
Crimping tool
• for ferrules
138
software & service
wieplan – confi guration software
wieplan was developed to provide you with a powerful
software tool for the configuration of terminal block assemblies
using Wieland DIN rail terminal blocks.
wieplan is available in 4 languages. It is user-friendly and its
intuitive user interface guides you step by step through the entire
configuration process. After you have completed your design,
you have the option of ordering the fully-built assembly from
Wieland.
Thus wieplan helps you to save time and money.
Benefits:
• To begin each configuration you automatically start from the
basic project management menu.
• You create new projects and are reliably guided through the
easy and practice-oriented program steps.
• You always have the choice of either opening an already
existing project or of creating a new one.
Benefits:
• You work with high-quality graphics viewing the terminal blocks
from the top; the accessories added are visible at all time.
• You continually use the plausibility check that reminds you of
the accessories required such as end plates.
• You are provided with a product catalog with search function;
you can add your own order numbers, if required; and you can
create libraries to add in your own products.
Benefits:
• You enter your data such as invoice and delivery address
in the order data screen only once and can use them for any
follow-up orders.
• You may order by e-mail; in this case the terminal block
assembly data are zipped automatically.
Benefits:
• You print out the order, the parts list and the drawing data,
and, if required, your own order numbers.
• You create a DXF file and export the current terminal block
assembly to a CAD program.
• You export the marking in CSV format including all marking
data for further processing in wiemarc, for example.
• You can use a bidirectional interface available for your CAE
system EPLAN.
Managing
projects
Confi guring
terminal block
assemblies
without errors
Entering
order data
Terminal block
assembly output
139
Software & Service
Solution specifi c, value added assembly
Terminal block assemblies
For those who want to make their control cabinet work easier
Wieland Electric pre-assembles completely equipped DIN rail
terminal block assemblies, even with the cables connected,
if required.
Cable assemblies
Individual cables tailored to your needs and combined with
various components can be delivered for your project in all
lengths.
Control and distribution panels
Our value-add departments will gladly assist you in selecting
individual Wieland components, or in laying out complete
panels, which we can also build for you.
Interface modules –
solution specifi c connectivity
Each control cabinet requires distribution functionality. In
most cases this is accomplished with standard control
panel wiring (0.5 mm or 1.5 mm fine stranded with ferrule) to
standardized interfaces (d-sub or ribbon cables). Upon the
customer’s request Wieland Electric can design individual
and customized solutions for all applications, too.
VDE 0303-T21 IEC 243/1 kV / mm tr/lf. 55 / 45
VDE 0303-T4 IEC 250 tr./lf.
VDE 0303-T30 IEC 93 Ω x cm lf. 1012
VDE 0303-T30 IEC 93 Ω lf. 1010
VDE 0303-T1 IEC 112 CTI 600
UL 746 B 120
VDE 0304 T.21 IEC 216-1 °C 123 / 107
°C -40
UL 94
28
26
24
22
20
18
–
16
14
12
10
8
16 6
25 4
35 2
50 (1/0) 0
70 (2/0) 00
95 (3/0) 000
– (4/0) 0000
120 250
150 300
185 350
240 500
300 600
140
facts & DATA
Tables, technical data
DIN rail terminal blocks
Material selection selos and fasis
Electrical and thermal characteristics of plastic materials
Standard cross sections of round copper conductors AWG/metric
Metal parts
• Special alloys enable low feed-through resistance and provide a gas-tight
contact area:
– Current carrying bar: Copper, or brass
– Clamping body and clamping screws: Galvanized and chromated steel
– Clamping spring: CrNi stainless steel
– Current carrying bar: Copper, tinned
Plastic materials
• Polyamide has excellent electrical, chemical and
mechanical characteristics:
– Temperature resistance: Up to 120°C
– Creepage resistance: CTI 600
– Flammability class: Self-extinguishing, UL94-V0
Metric size
ISO
Comparison between AWG/kcmil
and metric sizes
mm2AWG kcmil mm2
0.1* 0.081
0.14* 0.128
0.2 0.205
– 0.324
0.5 0.519
0.75 0.82
1 –
1.5 1,3
2.5 2,1
4 3,3
6 5,3
10 8,4
* not standardized
Metric size
ISO
Comparison between AWG/kcmil
and metric sizes
mm2AWG kcmil mm2
13.3
21.2
33.6
53.5
67.4
85
107.2
127
152
177
253
304
More information available under facts & DATA at www.wieland-electric.com
Thermoplast
Polyamide
Key figures / characteristics Standard Unit PA 666
Dielectric strength
Dielectric loss
tan _ at 1 MHz 0.02 / 0.3
Specific feed through resistance
Surface resistance
Creepage
Operating temperature RTI * °C at 1.5 mm
Temperature index TI **
Minimum operating temperature without
mechanical stress
Flammability Class / material
thickness V0 / 0.4
Suitability for tropical areas good
* electrical value
** related to 50% strain resistance drop after 5,000/20,000 hours
II III
mm2kA A
10 –
35 –
120 269
70 192
16 –
25 –
50 –
150 309
141
facts & DATA
Maximum short-time current capability assigned to mounting rails
DIN EN 60 947-7-2
Torque according to EN 60947-1
for selos DIN rail terminal blocks
II applies for screws that are tightened
with a screwdriver
III applies for screws that can be tightened
with tools other than a screwdriver
WT 2,5, width 5 mm M2.5 clamping body screw Nm 0.4
WT 4 … , width 6 mm M3 clamping body screw Nm 0.5
WT 6 and WKN 6, M4 clamping body screw Nm 1.2
width 8 mm M3.5 screw for cross connector Nm 0.8
WT 10, width 10 mm M4 clamping body screw Nm 1.2
WT 16, width 12 mm M6 clamping body screw Nm 2.0
WKN 35, width 16 mm M6 clamping body screw Nm 2.5 3.0
M5 screw for cross connector Nm 2.0 2.0
WKN 70, width 24 mm M8 clamping body screw Nm 3.5 6.0
M6 screw for cross connector Nm 2.5 3.0
WKN 150, width 28 mm M10 clamping body screw Nm 4.0 10.0
M8 screw for cross connector Nm 3.5 6.0
Rail profile Material Equivalent
E-Cu cross section
Short-time-
current capability
1 s
Rated thermal
current
of a PEN
busbar
DIN rail TH 15 x 5,5
according to IEC 60 715 Steel 1.2
G rail TS 32
according to IEC 60 715
Steel 4.2
Copper1) 14.4
Aluminium1) 8.4
DIN rail TS 35 x 27 x 7,5
according to IEC 60 715 Steel 1.92
DIN rail TS 35 x 27 x 15
according to IEC 60 715 Steel 3
DIN rail TS 35 x 24 x 15
according to IEC 60 715
(made from 2.3 mm thick material)
Steel 6
Copper1) 18
1) Selected copper or aluminum alloys from the manufacturer of the terminal block layout were used to achieve the values in the
table.
Mounting rails
Torques
142
facts & DATA
As a result of changes to the 2005 NEC, both the operator and manufacturer
of electrical equipment must comply with increased requirements related to
resistance to short-circuiting of equipment. In accordance with both the NEC
2005 Article 409.110 and UL 508A, he short circuit resistance of the complete
installation must now be considered. The installation‘s Short Circuit Current
Rating must be indicated on the equipment or control panel‘s legend plate.
Wieland has tested and determined individual SCCR values for their terminal
blocks in connection with the widest variety of fuses. These ratings are far
greater than the default values contained in UL 508A. As a result, when
qualifying your installation, you have increased flexibility and accuracy when
using Wieland terminal blocks.
SCCR Values for DIN rail terminal blocks
What does SCCR marking mean?
The Short Circuit Current Rating (SCCR) of a component represents the maximum short circuit
current level a device can safely withstand without compromising safety for installations and
personnel. Article 409 on industrial control panels was added to the NEC in the 2005 edition. This
article calls for all industrial control panels to be marked with a Short Circuit Current Rating. The
Short Circuit Current Rating (SCCR) requirements for UL 508A came into force in April 2006.
How is the SCCR marking determined?
The NEC Article 409 refers to the UL 508A Supplement SB as an approved method for
determining the SCCR of an industrial control panel. This specific method is outlined in
Section SB4.
1. Determination of the SCCR values of individual components,
for example DIN rail terminal blocks
2. Modification of the SCCR values through the use of current limiting devices per UL 508 SB 4.3
3. Selection of the lowest SCCR value from all the components
SCCR for DIN rail terminal blocks in general
The SCCR of a terminal block can be determined according to UL 508A using one of the
following methods:
1. Use the tested SCCR value
2. Use the default SCCR value as specified in table 4.1 of UL 508
If the DIN rail terminal blocks do not have a tested SCCR, then the UL default value
of 10 kA must be used. This relatively low value would limit the SCCR of the entire system
to max. 10 kA.
SCCR for Wieland DIN rail terminal blocks
Wieland determined SCCR values for its DIN rail terminal blocks used in conjunction
with fuses and circuit breakers. The resulting SCCR values are much higher than the values
specified for DIN rail terminal blocks in table SB 4.1 of UL 508A.
You will find the tested SCCR values for our selos and fasis product series in our customer
information 0019.3, available on www.wieland-electric.com.
The SCCR values are also published on the UL website (http://www.ul.com) under
file number E60678.
?
143
facts & DATA
Information about EX e
Technical information
• The information regarding cross sectional area and connection types pertains to unprepared wires without ferrules!
Ferrules are not necessary for secure connection. Whenever ferrules are used, make sure that the tools specified by the
manufacturer are used exclusively.
• The voltage ratings apply to the terminals in their intended application. When different products are mounted adjacent to
each other, the proper isolation distances must be adhered to.
• If the ground blocks are not used in block assemblies, but are mounted to the rail as single terminal blocks, end clamps
have to be used.
• A detailed description of technical data, the standards requirements, and the application conditions are available in the
flyer facts & DATA.
ATEX regulation
• For the use of DIN rail terminal blocks in Ex areas, the regulations of EN 60079-0 apply; whereas for increased safety Ex e
the regulations of EN 60079-7 must be followed. For an approximation of the laws of the EU member states, directive
94/9/EG was created, which is generally known as ATEX 100a and which is the basis for harmonization in this field.
ATEX stands for ”atmoshpere explosive” while 100a refers to the corresponding article of the EC contract.
• Directive ATEX 100a applies for protection against dust and gas explosions in all industrial Ex areas and in mining.
The testing and certificating institutes named in directive ATEX 100a must follow accreditation procedures which are the
same throughout Europe.
• In accordance with EN 60070-0/60079-7 and ATEX 100a, these certifying institutes write out EC certificates for proto-
type tests. These prototype test certificates for components together with the corresponding quality system certification
of the supplier are required to obtain the so-called ATEX approval.
• In combination with the ?mark, the markings of the Wieland terminal blocks have the following meaning:
? Identification
II Device group
2 Category
G D Areas
KEMA Name of testing institute
ATEX... Certifcate, year of testing, number
Mounting instructions for Ex e applications
• If feed-through blocks are mounted directly adjacent to other feed-through blocks of a different size, or directly adjacent
to ground blocks, the open side of the block group of the same type must be covered by an end plate or partition.
• If adjacent DIN rail terminal blocks are jumpered or if jumpered DIN rail terminal blocks are positioned next to
unjumpered DIN rail terminal blocks, a partition plate must be inserted between the individual terminal block groups or
at the beginning and end of a laterally or longitudinally connected terminal block (group) in order to meet the specified
isolation distances. Notched out and jumpering cross connectors can not be used in Ex areas.
• If the terminal blocks are combined with other certified series and sizes and when their accessories are used, the
required creepage distances and clearances must be adhered to.
• The feed through terminal blocks and protective conductor terminal blocks are suitable for enclosures for use in
explosive gas atmospheres or for use in the presence of combustible dust. For explosive gas atmospheres these
enclosures must satisfy the requirements of EN 60079-0 and EN 60079-7. For combustible dust these enclosures must
satisfy the requirements of EN 61241-0 and EN 61241-1 rather EN 50281-1-1.
• The indicated values for the current carrying capability refer to a maximum ambient temperature of 40 °C. When the
terminal blocks are loaded with the maximum rated current the temperature rise will be max. 45 K.
• Operating temperature range: selos WK...: -40° C ... +80° C
selos WKFN: -20° C ... +80° C
DQS certifi cation for all company sectors
• Quality standard as per DIN ISO 9001 in Development, Production and Assembly
• Continued control of the quality standard by means of regular internal and external quality audits
• Compatible with certificates of other countries:
– BSI Certificate, Great Britain
– SQS Certificate, Switzerland
– Aib-Vincotte Certificate, Belgium
– ÖQS Certificate, Austria
interface
interface
interface
Lösungen für den
Schaltschrank
Katalog 2012
safety
Sichere
Systemlösungen für die
Automatisierungstechnik
Katalog 2012
Sicherheit geht vor.
[B6$)(7<B8B8LQGG
Standard auf hohem Niveau.
gesis
®LINECT
gesis
®LINECT
Universelles
Steckverbindungssystem
für Einbauleuchten
[B7LWHOBJHVLVB/,1(&7B'B86$LQGG
gesis
®
MINI
Klein und stark.
gesis
®
MINI
Steckbare Elektroinstallation
im Kompaktformat
Immer im Fokus.
Heizung, Klima, Lüftung
Komponenten
für die Steuerung von
Heizung, Klima und Lüftung
Auf grüne Zukunft bauen.
smart Installation
smart Installation
Steckbare, dezentrale
Elektroinstallation
für nachhaltiges Bauen
Produktübersicht
Der Systempartner in
der Automatisierungstechnik
und in der
Gebäudesystemtechnik
Passt immer zusammen.
Elektrotechnische
Lösungen
für den Schaltschrank
Schaltschranklösungen
fasis BIT / fasis BIT-S / selos BIT
fasis BIT / fasis BIT-S / selos BIT
Installationsklemmen
für Installationsverteiler
Vielfalt gewinnt
Corporate Sustainability
2012
Global Compact Report
Wieland Division
Umwelterklärung
Standorte
Bamberg und Gerach
Corporate Sustainability
gesis
®TOP
Modulare Lichtlösungen.
gesis
®TOP
Komponenten
Leuchtenanschlusskonzept
144
contacts are green
0402.1 ” Components for heating,
ventilation, and air
conditioning
0401.1 ” Electro-technical solutions
for the control cabinet
Spanning various industries and products.
0602.1 ” gesis LINECT
Universal Connector System
for Recessed Luminaires“
0640.1 ” gesis MINI
the pluggable electrical installation
with a compact design“
0910.1 ” Corporate Sustainability
Environmental Statement
Bamberg and Gerach locations“
0117.0 ” fasis BIT / fasis BIT-S / selosBIT
DIN rail terminal blocks
for junction boxes“
0408.1 ” smart Installation
Pluggable, decentralized electrical
installation for sustainable building“
0902.1 ” The system partner in automation technology
and in building automation technology“
0009.0 ” Wieland apprenticeship
Auf der Erfolgsstraße.“
0601.1 ” gesis TOP Luminaires
connector concepts“
0800.1 „ interface
Solutions for the
Control Cabinet“
0860.1 „ safety
System Solutions for
Automation Technology“
gesis
®
SOLAR
gesis
®
SOLAR
Elektrische Installations-
technik für Photovoltaik
Katalog
gesis®ELECTRONIC
gesis®ELECTRONIC
Dezentrale Gebäudeautomation
per plug & play
Katalog 2012
gesis
®RAN
Intelligent verteilen.
gesis
®RAN
Dezentral installierbare
Elektronik-Verteiler
für die Gebäudeautomation
B7LWHOBJHVLV5$1BRKQHB%XQGLQGG
145
contacts are green
Wieland 100 years in Bamberg.
Wieland is one of the most important employers in Bamberg and the
surrounding area. The book portrays the life of the company‘s
founder Friedrich H. (”Fritz“) Wieland and the following generations,
closely intertwined with the company‘s history. Available in bookshops.
0409.1 ” gesis RAN
Decentralized installable
electronic distributer for
building automation”
0700.1 ” gesis ELECTRONIC
Decentralized building
automation with plug & play”
Industries
Building and
installation techn.
Wieland connects.
Automation technology
0710.1 ” gesis SOLAR
Electrical Installation Technology
for Photovoltaics“
0600.1 ” gesis CON GST 18
Electrical installation of
buildings via plug & play
Further documents and
brochures can be downloaded
quickly and easily via the
Download Center on
our homepage.
146
Support
Hotline – one call is all it takes
Our DIN rail terminal blocks hotline +49 951 9324-
991 our e-mail-service AT.TS@wieland-electric.com
is available to answer all your questions on
the subject of DIN rail terminal blocks.
Wieland e-Catalog
For further technical information and the latest news on
DIN rail terminal blocks, go to:
https://eshop.wieland-electric.com
contacts are green
147
USA
Wieland Electric Inc.
North American Headquarters
2889 Brighton Road
Oakville, Ontario L6H 6C9
Phone +1 905 8298414
Fax +1 905 8298413
www.wielandinc.com
Subject to technical modifications!
gesis®, podis®, samos® are registered trademarks of Wieland Electric GmbH
Our subsidiaries
... and the addresses of our representations worldwide are available at:
www.wieland-electric.com
CANADA
Wieland Electric Inc.
North American Headquarters
2889 Brighton Road
Oakville, Ontario L6H 6C9
Phone +1 905 8298414
Fax +1 905 8298413
www.wieland-electric.ca
SPAIN
Wieland Electric S.L.
C/ Maria Auxiliadora 2 bajos
E-08017 Barcelona
Phone +34 93 2523820
Fax +34 93 2523825
ventas@wieland-electric.com
GREAT BRITAIN
Wieland Electric Ltd.
Riverside Business Centre,
Walnut Tree Close
GB-Guildford /Surrey GU1 4UG
Phone +44 1483 531213
Fax +44 1483 505029
sales@wieland.co.uk
CHINA
Wieland Electric Trading
Unit 2703
International Soho City
889 Renmin Rd.,
Huang Pu District
PRC- Shanghai 200010
Phone +86 21 63555833
Fax +86 21 63550090
info-shanghai@wieland-electric.cn
ITALY
Wieland Electric S.r.l.
Via Edison, 209
I-20019 Settimo Milanese
Phone +39 02 48916357
Fax +39 02 48 920685
info@wieland-electric.it
FRANCE
Wieland Electric SARL.
Le Céramê Hall 6
47, avenue des Genottes
CS 48313
95803 Cergy-Pontoise Cedex
Phone +33 1 30320707
Fax +33 1 30320714
infos@wieland-electric.fr
DENMARK
Wieland Electric A/S
Vallørækken 26
DK-4600 Køge
Phone +45 70 266635
Fax +45 70 266637
sales@wieland-electric.dk
F Informational material for
ordering and for downloading
from our websites
POLAND
Wieland Electric Sp. Zo.o.
Św. Antoniego 8
62-080 Swadzim
Phone +48 61 2225400
Fax +48 61 8407166
office@wieland-electric.pl
BELGIUM
ATEM – Wieland Electric NV
Bedrijvenpark De Veert 4
B-2830 Willebroek
Phone +32 3 8661800
Fax +32 3 8661828
info.belgium@wieland-electric.com
Headquarters:
Wieland Electric GmbH
Brennerstraße 10 – 14
96052 Bamberg, Germany
Sales and Marketing Center:
Wieland Electric GmbH
Benzstraße 9
96052 Bamberg, Germany
Phone +49 951 9324-0
Fax +49 951 9324-198
www.wieland-electric.com
www.gesis.com
info@wieland-electric.com
Industrial technology
Solutions for the control cabinet
• DIN rail terminal blocks
– Screw, tension spring or push-in connection technology
– Wire cross sections up to 240 mm2
– Numerous special functions
– Software solutions interfacing to CAE systems
• Safety
– Safe signal acquisition
– Safety switching devices
– Modular safety modules
– Compact safety controllers
– Application consulting and training
• Network engineering and fi eldbus systems
– Remote maintenance via VPN industrial router and VPN service portal
– Industrial Ethernet switches
– PLC and I/O systems, standard and increased
environmental conditions
• Interface
– Power supply units
– Overvoltage protection
– Coupling relays, semiconductor switches
– Timer relays, measuring and monitoring relays
– Analog coupling and converter modules
– Passive interfaces
Solutions for fi eld applications
• Decentralized installation and automation technology
– Electrical installation for wind tower
– Fieldbus interfaces and motor starters
• Connectors for industrial applications
– Rectangular and round connectors
– Aluminum or plastic housings
– Degree of protection up to IP 68
– Current-carrying capacity up to 100 A
– Connectors for hazardous areas
– Modular, application-specifi c technology
PC board terminals and connectors
– Screw or spring clamp connection technology
– Spacings: 3.5 mm to 10.16 mm
– Refl ow or wave soldering process
Building and installation technology
• Building installation systems
– Main power supply connectors IP 20/IP 65 ... IP 68
– Bus connectors
– Low-voltage connectors
– Power distribution system with fl at cables
– Distribution systems
– Bus systems in KNX, LON and wireless technology
– DIN rail terminal blocks for electrical installations
– Overvoltage protection
0500.1 C 02/13
