R49 NISSEI-ARCOTRONICS X1 CLASS (EN132400) - MKP Series Bulk Taped Fig. 1 Fig. 2 METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES Typical applications: Interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Class X1 shall be applied for PERMANENTLY CONNECTED APPARATUS. Insulated rigid leads Insulated flexible leads 0.5mm 2 Note: PERMANENTLY CONNECTED APPARATUS: Apparatus which is intended for connection to the mains by a connection which cannot be loosened BY HAND. BY HAND: Operation that does not require the use of any object such a tool, coin, etc. SERIES CODE: R49 p 15 0.6 Od 0.05 22.5p27.5 0.8 Fig. 1 12.70 All dimensions are in mm. Fig 2. 19.05 P2 GENERAL TECHNICAL DATA PART NUMBERING SYSTEM 1 2 3 R4 9 1. 2. 4 5 6 7 8 [ ] 3 10 3. Series code Capacitance value in pico farads. First 2 digits are significant and 3rd digit indicates number of zeros. Capacitance tolerance 4. 5. A.C. voltage Packaging code 6. Lead spacing (mm) K = 10% B = bulk F = 10 R = 27.5 7. A = ammo I = 15 R = reel N = 22.5 Lead length (mm) L = 24-27 V = 2.7-3.3 8. M = 20% S = 4.0-6.0 T = 3.5-4.0 Dielectric: Plates: polypropylene film metal layer deposited by evaporation under vacuum Winding: non-inductive type Leads: tinned wire Protection: plastic case, polyurethane resin filled. Box material is solvent resistant and flame retardant according to UL94 V0 Marking: manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant Climatic category: 40/110/56 IEC 60068-1 Operating temperature range: -40 to +110C Related documents: IEC 60384-14 2nd edition 1993; EN 132400 WINDING SCHEME Internal code single sided metallized polypropylene film R49 NISSEI-ARCOTRONICS X1 CLASS (EN132400) - MKP Series METALLIZED POLYPROPYLENE FILM CAPACITOR SELF-HEALING PROPERTIES SERIES CODE: R49 Rated Cap. 310Vac Max dv/dt At 440Vdc (V/s) 600 600 600 600 500 500 500 500 500 500 500 500 400 400 400 400 400 200 200 200 200 200 200 Part Number B H L P 5.0 11.0 13.0 10.0 R49103-310-F0.010 F 5.0 11.0 13.0 10.0 R49153-310-F0.015 F 6.0 12.0 13.0 10.0 R49223-310-F0.022 F 6.0 12.0 13.0 10.0 R49333-310-F0.033 F 5.0 11.0 18.0 15.0 R49103-310-I0.010 F 5.0 11.0 18.0 15.0 R49153-310-I0.015 F 5.0 11.0 18.0 15.0 R49223-310-I0.022 F 5.0 11.0 18.0 15.0 R49333-310-I0.033 F 6.0 12.0 18.0 15.0 R49473-310-I0.047 F 6.0 12.0 18.0 15.0 R49683-310-I0.068 F 7.5 13.5 18.0 15.0 R49104-310-I0.10 F 10.0 16.0 18.0 15.0 R49154-310-I0.15 F 6.0 15.0 26.5 22.5 R49104-310-N0.10 F 7.0 16.0 26.5 22.5 R49154-310-N0.15 F 8.5 17.0 26.5 22.5 R49224-310-N0.22 F 10.0 18.5 26.5 22.5 R49334-310-N 0.33 F 11.0 20.0 26.5 22.5 R49474-310-N0.47 F 9.0 17.0 32.0 27.5 R49334-310-R0.33 F 11.0 20.0 32.0 27.5 R49474-310-R0.47 F 13.0 22.0 32.0 27.5 R49684-310-R0.68 F 14.0 28.0 32.0 27.5 R49105-310-R1.0 F 18.0 33.0 32.0 27.5 R49155-310-R1.5 F 22.0 37.0 32.0 27.5 R49225-310-R2.2 F Tolerance: K ( 10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); S (4-6); T (3.5-4.0); V (2.7-3.3) All dimensions are in mm. APPROVALS ELECTRICAL CHARACTERISTICS Rated voltage (VR): 310Vac; 50/60Hz Capacitance range: 0.01F to 2.2F Capacitance values: E6 series (IEC 60063 Norm) Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): -4 tgx10 at +25C 5C: *Typical value Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 5 10 (6)* at 1kHz +25C 5C 1 min 100Vdc 5 1 x 10 M (5 x 10 M)* for C 0.33F 30000 s (150000 s)* for C>0.33F *Typical value Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C 5C TEST METHOD AND PERFORMANCE Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: Performance Dielectric strength: +40C 2C 93% 2% 56 days no dielectric breakdown or flashover at 4.3 x VR (d.c.) /1 min Capacitance change (C/C): 5% IMQ EN 132400 Class X1 File No. CA08.00030 CSA C22.2 N1 (up to 1F) Across-the-line File No. LR83890 UL 1414 (up to 1F) Across-the-line File No. E 97797 UL 1283 Electromagnetic Interference Filters File No. E85238 (*) CSA and UL 1414 for 250Vac only. nd Approved according to EN 132400 (IEC 60384-14 2 edition 1993 plus Amendment A1: 1995). According to IEC 60065. Insulation resistance: Endurance: Test conditions Temperature: Test duration: Voltage applied: Performance Dielectric strength: 50% of initial limit +110C 2C 1000 h 1.25xVR + 1000Vac 0.1 s/h no dielectric breakdown or flashover at 4.3 x VR (d.c.) /1 min Capacitance change (C/C): 10% Insulation resistance: 50% of initial limit Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen): 10 s 1 s Performance Capacitance change (C/C): 2%