NISSEI-ARCOTRONICS R49
Bulk Taped
Fig. 1 Fig. 2
Insulated rigid leads Insulated flexible leads 0.5mm2
p ≤ 15 22.5≤p≤27.5
Ød ±0.05 0.6 0.8
Fig. 1 Fig 2.
P2 12.70 19.05
All dimensions are in mm.
X1 CLASS (EN132400) – MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and
across-the-line applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
Class X1 shall be applied for PERMANENTLY
CONNECTED APPARATUS.
Note: PERMANENTLY CONNECTED APPARATUS:
Apparatus which is intended for connection to the
mains by a connection which cannot be loosened
BY HAND.
BY HAND:
Operation that does not require the use of any
object such a tool, coin, etc.
SERIES CODE: R49
PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8
[ ]
1. Series code
2. Capacitance value in pico farads. First 2 digits
are significant and 3rd digit indicates number of
zeros.
3. Capacitance tolerance
K = 10% M = 20%
4. A.C. voltage
5. Packaging code
B = bulk A = ammo R = reel
6. Lead spacing (mm)
F = 10 I = 15 N = 22.5
R = 27.5
7. Lead length (mm)
L = 24-27 S = 4.0-6.0 T = 3.5-4.0
V = 2.7-3.3
8. Internal code
GENERAL TECHNICAL DATA
Dielectric: polypropylene film
Plates: metal layer deposited by evaporation under
vacuum
Winding: non-inductive type
Leads: tinned wire
Protection: plastic case, polyurethane resin filled. Box
material is solvent resistant and flame
retardant according to UL94 V0
Marking: manufacturer’s logo, series, capacitance,
tolerance, rated voltage, capacitor class,
dielectric code, climatic category, passive
flammability category, manufacturing date
code, approvals, manufacturing plant
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14 2nd edition 1993;
EN 132400
WINDING SCHEME
R 4 9 3 1 0
single sided metallized
polypropylene film
NISSEI-ARCOTRONICS R49
X1 CLASS (EN132400) – MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
SELF-HEALING PROPERTIES
SERIES CODE: R49
All dimensions are in mm.
APPROVALS
(*)
IMQ EN 132400 Class X1 File No. CA08.00030
CSA C22.2 N°1
(up to 1µF) Across-the-line File No. LR83890
UL 1414
(up to 1µF) Across-the-line File No. E 97797
UL 1283
Electromagnetic
Interference
Filters
File No. E85238
CSA and UL 1414 for 250Vac only.
Approved according to EN 132400 (IEC 60384-14 2nd edition 1993 plus
Amendment A1: 1995).
According to IEC 60065.
Rated
Cap. 310Vac Max dv/dt
At 440Vdc Part Number
B H L P (V/µs)
0.010 µF 5.0 11.0 13.0 10.0 600 R49103-310-F-
0.015 µF 5.0 11.0 13.0 10.0 600 R49153-310-F-
0.022 µF 6.0 12.0 13.0 10.0 600 R49223-310-F-
0.033 µF 6.0 12.0 13.0 10.0 600 R49333-310-F-
0.010 µF 5.0 11.0 18.0 15.0 500 R49103-310-I-
0.015 µF 5.0 11.0 18.0 15.0 500 R49153-310-I-
0.022 µF 5.0 11.0 18.0 15.0 500 R49223-310-I-
0.033 µF 5.0 11.0 18.0 15.0 500 R49333-310-I-
0.047 µF 6.0 12.0 18.0 15.0 500 R49473-310-I-
0.068 µF 6.0 12.0 18.0 15.0 500 R49683-310-I-
0.10 µF 7.5 13.5 18.0 15.0 500 R49104-310-I-
0.15 µF 10.0 16.0 18.0 15.0 500 R49154-310-I-
0.10 µF 6.0 15.0 26.5 22.5 400 R49104-310-N-
0.15 µF 7.0 16.0 26.5 22.5 400 R49154-310-N-
0.22 µF 8.5 17.0 26.5 22.5 400 R49224-310-N-
0.33 µF 10.0 18.5 26.5 22.5 400 R49334-310-N
0.47 µF 11.0 20.0 26.5 22.5 400 R49474-310-N-
0.33 µF 9.0 17.0 32.0 27.5 200 R49334-310-R-
0.47 µF 11.0 20.0 32.0 27.5 200 R49474-310-R-
0.68 µF 13.0 22.0 32.0 27.5 200 R49684-310-R-
1.0 µF 14.0 28.0 32.0 27.5 200 R49105-310-R-
1.5 µF 18.0 33.0 32.0 27.5 200 R49155-310-R-
2.2 µF 22.0 37.0 32.0 27.5 200 R49225-310-R-
Tolerance: K (± 10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); S (4-6); T (3.5-4.0); V (2.7-3.3)
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 310Vac; 50/60Hz
Capacitance range: 0.01µF to 2.2µF
Capacitance values: E6 series (IEC 60063 Norm)
Capacitance tolerances (measured at 1 kHz):
10% (K); 20% (M).
Dissipation factor (DF):
tgδ×10-4 at +25°C ± 5°C: ≤ 10 (6)* at 1kHz
*Typical value
Insulation resistance:
Test conditions
Temperature: +25°C ± 5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥ 1 x 105 MΩ (5 x 105 MΩ)* for C ≤0.33µF
≥30000 s (150000 s)* for C>0.33µF
*Typical value
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C ± 5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ± 2%
Test duration: 56 days
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.) /1 min
Capacitance change (∆C/C): ≤ 5%
Insulation resistance: ≥ 50% of initial limit
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25×VR + 1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.) /1 min
Capacitance change (∆C/C): ≤ 10%
Insulation resistance: ≥ 50% of initial limit
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen): 10 s ± 1 s
Performance
Capacitance change (∆C/C): ≤ 2%
