Aluminum Electrolytic Capacitors/ TG Surface Mount Type TG V Type : n Features Country of Origin Endurance:125C 1000 to 2000 h Miniaturization(40% less than TA Series) Low ESR(Low temp) Vibration-proof product is available upon request.(8 RoHS directive compliant (Parts No:8 to 10 EEEi , 12.5 to EEVi) n Applications Japan < = ) For use near car engines. Good for electronically controlledunits (ECU,ABS etc). n Specifications Category temp. range -40 to +125C 10 to 100 V .DC Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan 10 to 4700 F 20 % (120Hz/+20C) I <= 0.01 CV or 3( A) after 2 minutes (Whichever is greater) Please see the attached standard products list Characteristics at Low Temperature W.V. (V) -25 / +20 C -40 / +20 C 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 63 2 3 80 2 3 100 2 3 (Impedance ratio at 120Hz) After applying rated working voltage for 1000 hours(8 x 6.2), 2000 hours(8x10.2 <=) at +125 2C and then being stabilized at +20C, capacitors shall meet the following limits. 30 % of initial measured value (code U:35%) Capacitance change < 300 % of initial specified value (code U:350%) tan = < initial specified value DC leakage current = After storage for 1000 hours at +125 2C with no voltage applied and then being stabilized at +20C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) Endurance Shelf Life After reflow soldering and then being stabilized at +20C, capacitor shall meet the following limits. Resistance to Soldering Heat Capacitance change tan DC leakage current n Marking 10 % of initial measured value < initial specified value = < initial specified value = n Dimensions in mm (not to scale) ( ) reference size W.V. code A0.2 0.3 max K (P) B0.2 Mark for Lead-Free products Lot number >12.5) (= Series identification H TG D0.5 . Negative polarity marking Capacitance(F) E~G=L0.3 H~K=L0.5 (Black circle) (I) <10) (= w (I) Series: W.V. code Capacitance (F) Negative polarity marking Series identification TG L o t nu m ber W.V. code V Code 10 A 16 C 25 E 35 V V Code 50 H 63 J 80 100 K 2A (mm) Size code D L A,B H max. I W P K E 8.0 6.2 8.3 9.5 F 8.0 10.2 8.3 10.0 G 10.0 10.2 10.3 12.0 3.5 0.90 0.2 4.6 0.70 0.20 H13 12.5 13.5 13.5 15.0 4.7 0.90 0.3 4.4 0.70 0.30 J16 16.0 16.5 17.0 19.0 5.5 1.20 0.3 6.7 0.70 0.30 K16 18.0 16.5 19.0 21.0 6.7 1.20 0.3 6.7 0.70 0.30 3.4 0.65 0.1 2.2 0.35 -0.20 to +0.15 3.4 0.90 0.2 3.1 0.70 0.20 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2006 EE55 Aluminum Electrolytic Capacitors/ TG n Case size VS Capacitance, ESR and Ripple current W.V. (V) Capacitance (F) 10 size ESR 20C -40C Ripple current size 100 F ESR;(/100kHz,+20C),Ripple current ;(mA r.m.s./100kHz+125C) 16 25 ESR 20C -40C Ripple current 47 100 E 20 1.00 (100) (F) 10 0.50 (10) (0.50) 197 (197) size ESR 20C -40C Ripple current E 1.00 20 100 (E) (1.00) (20) (100) F 0.50 10 197 (F) (0.50) (10) (197) 220 (E) F 0.50 10 197 G 0.30 6.0 270 G 0.30 6.0 270 330 (F) (0.50) (10) (197) (G) (0.30) (6.0) (270) (G) (0.30) (6.0) (270) G 0.30 6.0 270 H13 0.12 1.8 800 H13 0.12 1.8 800 470 (G) (0.30) (6.0) (270) H13 0.12 1.8 800 H13 0.12 1.8 800 H13 0.12 1.8 800 (H13) (0.12) (1.8) (800) J16 0.08 (20) (1.00) 680 1000 H13 0.12 1.8 800 1500 (H13) (0.12) (1.8) (800) 2200 J16 0.08 1.2 1100 3300 (0.08) (1.2) (1100) K16 0.075 1.1 1300 K16 0.075 1.1 1300 (J16) 4700 W.V. (V) Capacitance (F) 1.2 1100 (H13) (0.12) (1.8) (800) (J16) (0.08) (1.2) (1100) J16 0.08 1.2 1100 K16 0.075 1.1 1300 (J16) (0.08) (1.2) (1100) K16 0.075 1.1 1300 K16 0.075 1.1 1300 K16 0.075 1.1 1300 35 size 50 ESR 20C -40C Ripple current size 63 ESR 20C -40C Ripple current size ESR 20C -40C Ripple current 10 E 1.60 32 80 E 2.20 55 55 22 E 1.60 32 80 F 1.00 25 100 (E) (1.60) (32) (80) (F) (1.00) (25) (100) F 0.75 15 133 G 0.80 20 150 (15) (133) (F) (1.00) (25) (100) 10 221 G 0.80 20 150 33 E 1.00 20 100 (E) (1.00) (20) (100) (F) (0.75) F 0.50 10 197 G 0.50 (F) (0.50) (10) (197) (G) (0.80) (20) (150) G 0.30 6.0 270 (G) (0.50) (10) (221) H13 0.26 5.2 350 220 (G) (0.30) (6.0) (270) H13 0.23 3.4 600 H13 0.26 5.2 350 330 H13 0.12 1.8 800 H13 0.23 3.4 600 J16 0.18 3.6 500 470 (H13) (0.12) (1.8) (800) J16 0.15 2.2 900 J16 0.18 3.6 500 J16 0.08 1.2 1100 (J16) (0.08) (1.2) (1100) (J16) (0.15) (2.2) (900) K16 0.075 1.1 1300 K16 0.14 2.1 950 K16 0.075 1.1 1300 K16 0.14 2.1 950 47 100 680 1000 W.V. (V) Capacitance (F) 80 size 100 ESR 20C -40C Ripple current size ESR 20C -40C Ripple current 10 F 1.30 32 70 F 1.30 32 70 22 (F) (1.30) (32) (70) (F) (1.30) (32) (70) G 1.00 25 90 G 1.00 25 90 (F) (1.30) (32) (70) G 1.00 25 90 G 1.00 25 90 H13 0.42 8.4 250 J16 0.30 6.0 350 K16 0.28 5.6 400 K16 0.28 5.6 400 33 47 100 220 330 470 (G) (1.00) (25) (90) H13 0.42 8.4 250 (H13) (0.42) (8.4) (250) J16 0.30 6.0 350 (J16) (0.30) (6.0) (350) K16 0.28 5.6 400 (J16) (0.30) (6.0) (350) K16 0.28 5.6 400 K16 0.28 5.6 400 ( ) Shows miniaturized size Suffix : U Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2006 EE56 Aluminum Electrolytic Capacitors/ TG n Standard Products Cap (20%) (V) (F) 10 Specification Ripple ESR tan Dia. Length S i z e current (100kHz) (120Hz) code (100kHz) (+20C) (+20C) (+125C) (mm) (mm) () (m A ) 100 8 6.2 E 220 (8) (6.2) (E) 8 10.2 F 330 (8) (10.2) (F) 10 10.2 470 (10) (10.2) 1000 12.5 1500 2200 3300 (100) 197 (197) 270 EEETG1A101P (2) 1000 0.30 EEETG1A221UP (2) 1000 0.50 0.30 EEETG1A221P (2) 500 (0.50) 0.30 EEETG1A331UP (2) 500 EEETG1A331P (2) 500 0.30 EEETG1A471UP (2) 500 0.12 0.30 EEVTG1A102Q (3) 200 (800) (0.12) 0.30 EEVTG1A152UQ (3) 200 1100 0.08 0.32 EEVTG1A222M (3) 125 125 800 (12.5) (13.5) (H13) J16 16.5 0.30 0.30 H13 16 1.00 (1.00) (pcs) 0.30 (270) 13.5 Taping (0.30) (G) (16) (16.5) (J16) (1100) (0.08) 0.34 EEVTG1A332UM (3) 0.34 EEVTG1A332M (3) 125 125 16.5 K16 1300 0.075 4700 18 16.5 K16 1300 0.075 0.36 EEVTG1A472M (3) 100 8 10.2 F 197 0.50 0.23 EEETG1C101P (2) 500 220 (8) (10.2) (F) (197) (0.50) 0.23 EEETG1C221UP (2) 500 10 10.2 G 270 0.30 0.23 EEETG1C221P (2) 500 (0.30) (10) (10.2) (G) (270) 0.23 EEETG1C331UP (2) 500 12.5 13.5 H13 800 0.12 0.23 EEVTG1C331Q (3) 200 470 12.5 13.5 H13 800 0.12 0.23 EEVTG1C471Q (3) 200 680 12.5 13.5 H13 800 0.12 0.23 EEVTG1C681Q (3) 200 1000 (12.5) (13.5) (H13) (800) (0.12) 0.23 EEVTG1C102UQ (3) 200 J16 1100 0.08 0.23 EEVTG1C102M (3) 125 (16) (16.5) (J16) (1100) (0.08) 0.25 EEVTG1C222UM (3) 125 16 2200 16.5 18 16.5 K16 1300 0.075 0.25 EEVTG1C222M (3) 125 3300 18 16.5 K16 1300 0.075 0.27 EEVTG1C332M (3) 125 47 8 6.2 E 100 1.00 0.18 EEETG1E470P (2) 1000 100 (8) (6.2) (E) (1.00) 0.18 EEETG1E101UP (2) 1000 8 10.2 F 0.50 0.18 EEETG1E101P (2) 500 (8) (10.2) (F) (197) (0.50) 0.18 EEETG1E221UP (2) 500 10 10.2 G 270 0.30 0.18 EEETG1E221P (2) 500 (0.30) 0.18 EEETG1E331UP (2) 500 220 330 (10) (10.2) (100) 197 (G) (270) 12.5 13.5 H13 800 0.12 0.18 EEVTG1E331Q (3) 200 470 12.5 13.5 H13 800 0.12 0.18 EEVTG1E471Q (3) 200 680 (12.5) (13.5) (H13) (800) (0.12) 0.18 EEVTG1E681UQ (3) 200 J16 1100 0.08 0.18 EEVTG1E681M (3) 125 (16) (16.5) (J16) (1100) (0.08) 25 16 1000 35 G 100 Min. Packaging Q'ty Part No. (RoHS:compliant) 18 330 16 Case Size Reflow W.V. Endurance : 125C 1000 to 2000h 16.5 0.18 EEVTG1E102UM (3) 125 18 16.5 K16 1300 0.075 0.18 EEVTG1E102M (3) 125 2200 18 16.5 K16 1300 0.075 0.20 EEVTG1E222M (3) 125 33 8 6.2 E 100 1.00 0.16 EEETG1V330P (2) 1000 47 (8) (6.2) (E) (1.00) 0.16 EEETG1V470UP (2) 1000 8 10.2 F 0.50 0.16 EEETG1V470P (2) 500 (8) (10.2) (F) (197) (0.50) 0.16 EEETG1V101UP (2) 500 10 10.2 G 270 0.30 0.16 EEETG1V101P (2) 500 (0.30) 0.16 EEETG1V221UP (2) 500 0.12 0.16 EEVTG1V331Q (3) 200 100 220 (10) (10.2) 330 12.5 13.5 (100) 197 (G) (270) H13 800 The taping dimensions are explained on p.195 of our Catalog. Please use it as a reference guide. Reflow Profile(Fig-1 to Fig-6) listed on last page of our Catarog. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2006 EE57 Aluminum Electrolytic Capacitors/ TG n Standard Products Cap (20 %) (V) (F) 470 12.5 16 35 680 Taping (800) (0.12) 0.16 EEVTG1V471UQ (3) 200 1100 0.08 0.16 EEVTG1V471M (3) 125 (0.08) 0.16 EEVTG1V681UM (3) 125 0.075 0.16 EEVTG1V681M (3) 125 (16) (16.5) (J16) (1100) 1300 18 16.5 K16 1300 K16 18 16.5 (pcs) 0.075 0.16 EEVTG1V102M (3) 125 8 6.2 E 80 1.60 0.14 EEETG1H100P (2) 1000 22 8 6.2 E 80 1.60 0.14 EEETG1H220P (2) 1000 33 (8) (6.2) (E) (1.60) 0.14 EEETG1H330UP (2) 1000 8 10.2 F EEETG1H330P (2) 500 47 (8) (10.2) (F) (133) 500 10 10.2 G 221 (80) 133 0.75 0.14 (0.75) 0.14 EEETG1H470UP (2) 0.50 0.14 EEETG1H470P (2) 500 (0.50) 100 (10) (10.2) (G) (221) 0.14 EEETG1H101UP (2) 500 220 12.5 13.5 H13 600 0.23 0.14 EEVTG1H221Q (3) 200 330 12.5 13.5 H13 600 0.23 0.14 EEVTG1H331Q (3) 200 470 16 16.5 J16 900 0.15 0.14 EEVTG1H471M (3) 125 (0.15) 680 (16) (16.5) (J16) 18 16.5 K16 (900) 0.14 EEVTG1H681UM (3) 125 950 0.14 0.14 EEVTG1H681M (3) 125 950 0.14 0.14 EEVTG1H102M (3) 125 2.20 0.12 EEETG1J100P 1000 18 16.5 K16 10 8 6.2 E 55 22 8 10.2 F 100 33 (8) (10.2) (F) (100) 10 10.2 G 150 (8) (10.2) (F) (100) 10.2 G 150 47 63 10 100 (10) (10.2) (G) (150) 1.00 0.12 EEETG1J220P (2) 1000 (2) 500 (1.00) 0.12 EEETG1J330UP (2) 500 0.80 0.12 EEETG1J330P (2) 500 (1.00) 0.12 EEETG1J470UP (2) 500 0.80 0.12 EEETG1J470P (2) 500 (0.80) 0.12 EEETG1J101UP (2) 500 12.5 13.5 H13 350 0.26 0.12 EEVTG1J101Q (3) 200 220 12.5 13.5 H13 350 0.26 0.12 EEVTG1J221Q (3) 200 330 16 16.5 J16 500 0.18 0.12 EEVTG1J331M (3) 125 470 16 16.5 J16 500 0.18 0.12 EEVTG1J471M (3) 125 10 8 10.2 F 70 1.30 0.12 EEETG1K100P (2) 500 22 (8) (10.2) (F) (70) (1.30) 0.12 EEETG1K220UP (2) 500 10 10.2 G 90 1.00 0.12 EEETG1K220P (2) 500 (8) (10.2) (F) (70) (1.30) 0.12 EEETG1K330UP (2) 500 10 10.2 G 90 1.00 0.12 EEETG1K330P (2) 500 33 47 80 13.5 (H13) 16.5 J16 Min. Packaging Q'ty 10 1000 50 Part No. (RoHS:compliant) Specification Ripple ESR tan Dia. Length Size current (100kHz) code (100kHz) (+20C) (120Hz) (+20C) (+125C) (mm) (mm) () (m A ) Case Size Reflow W.V. Endurance : 125C 1000 to 2000h 100 220 (10) (10.2) (G) (90) (1.00) 0.12 EEETG1K470UP (2) 500 12.5 H13 250 0.42 0.12 EEVTG1K470Q (3) 200 (0.42) 0.12 EEVTG1K101UQ (3) 200 0.30 0.12 EEVTG1K101M (3) 125 (0.30) 0.12 EEVTG1K221UM (3) 125 0.28 0.12 EEVTG1K221M (3) 125 (12.5) (13.5) (H13) 16 16.5 J16 (16) (16.5) (J16) 470 (250) 350 (350) K16 400 (16) (16.5) (J16) 18 16.5 K16 18 16.5 K16 (350) 18 330 13.5 16.5 (0.30) 0.12 EEVTG1K331UM (3) 125 400 0.28 0.12 EEVTG1K331M (3) 125 400 0.28 0.12 EEVTG1K471M (3) 125 The taping dimensions are explained on p.195 of our Catalog. Please use it as a reference guide. Reflow Profile(Fig-1 to Fig-6) listed on last page of our Catalog. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2006 EE58 Aluminum Electrolytic Capacitors/ TG n Standard Products Cap (20%) (V) (F) 100 Case Size Dia. Length Size code Min. Packaging Q'ty Part No. (RoHS:compliant) Specification Ripple tan ESR current (100kHz) (100kHz) (120Hz) (+125C) (+20C) (+20C) () (m A ) Reflow W.V. Endurance : 125C 1000 to 2000h Taping 10 8 10.2 F 70 1.30 0.1 EEETG2A100P (2) 500 22 (8) (10.2) (F) (70) (1.30) 0.1 EEETG2A220UP (2) 500 500 (mm) (mm) (pcs) 10 10.2 G 90 1.00 0.1 EEETG2A220P (2) 33 10 10.2 G 90 1.00 0.1 EEETG2A330P (2) 500 47 12.5 13.5 H13 250 0.42 0.1 EEVTG2A470Q (3) 200 100 16 16.5 J16 350 0.30 0.1 EEVTG2A101M (3) 125 220 18 16.5 K16 400 0.28 0.1 EEVTG2A221M (3) 125 330 18 16.5 K16 400 0.28 0.1 EEVTG2A331M (3) 125 The taping dimensions are explained on P.195 of our Catalog. Please use it as a reference guide. Reflow Profile(Fig-1 to Fig-6) listed on last page of our Catalog. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2006 EE59 Aluminum Electrolytic Capacitors n Reflow guaranteed condition l RoHS compliant Parts upper part temperature(C) Peak temperature 250 230 Time in 230C or more 200 160 C 150 120(s) Time in 200C or more 100 50 Time (s) Lead-Free reflow Reflow No Fig.(1) Fig.(2) Fig.(3) Fig.(4) Category 3 to 6.3 8 to 10 12.5 to 18 EB series only ( 10 to 18) Peak temperature 235C 230C (220C) 230C Time in peak temperature 250C 5s 5s 5s (s) 5s Time in 200C or more 60s 60s 20s (30s) 20s 1 time 1 time 1 time 1 time Time of reflow High temperature Lead-Free reflow Reflow No Category Fig.(5) Fig.(6) 4 to 6.3 8 to 10 Peak temperature 260C (255C) 245C Time around peak 5s in (10s) in 250C or more 10s in 240C or more Time in 230C or more 30s 30s Time in 200C or more 70s 70s 2 times 2 times temperature Time of reflow l RoHS not compliant Ctegory Dia. 3 to 6.3 EEV- , ECEV- Part No. Dia. 8 to 10 EEV- , ECEV- Part No. Peak temperature/ Time in 200C or more Peak temperature(C) Reflow condition Peak temperature(C) Peak temperature/ Time in 200C or more 240 230 220 210 0 10 20 30 40 50 60 Time in 200C or more 240 230 220 210 0 10 20 30 40 50 60 Time in 200C or more i For reflow, use athermal condition system such as infrared radiation(IR) or hot blast. i Vapor heat transfer systems(VPS) are not recommended. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. -- EE193 --