2013-3- 2012.11.22 11:22 PM 65 G4-1.25G(Mac 1) JETPDF 2400DPI 175LPI T SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CA Chip type, Long Life Series Long Life Solvent Proof *Chip type, long life capacitance in large case sizes *Chip type with load life of 5000 hours at +105 C *Designed for surface mounting on high density PC board *Applicable to automatic insertion machine using carrier tape *Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance -55 ~ +105 C I = 0.01CV or 3A whichever is greater (after 2 minutes) 20% at 120Hz, 20 C WV tan Dissipation factor max. (at 120Hz, 20 C) Low temperature characteristics (Impedance ratio at 120Hz) Load life (after application of the rated voltage for 5000 hours at 105 C) 6.3 0.28 10 0.24 6.3 4 10 WV Z-25 C/Z+20 C Z-40 C/Z+20 C 16 0.2 25 0.16 10 3 7 16 2 5 35 0.13 25 2 3 50 0.12 35 2 3 50 2 3 Less than specified value Within 30% of initial value Less than 300% of specified value Leakage current Capacitance change tan After 1000 hours no load test, leakage current, capacitance and tanare same as load life value. The measurement shall be performed at 20 C by the KS C 6035 clause 5.4. Shelf life (at 105 C) The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them at 250 C for 10 seconds. Less than specified value Within 10% of initial value Less than specified value Leakage current Capacitance change tan Unit : mm DRAWING -Series code of CA is "A" Please refer to drawing for CK Series in page 69 for detail drawing. DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV F 10 22 33 47 100 220 330 470 1000 6.3 6.3x5.8 6.3x7.7 8x10 10x10 10x10 10 60 101 160 254 313 6.3x5.8 6.3x7.7 8x10 10x10 10x10 16 46 81 141 238 254 6.3x5.8 6.3x5.8 6.3x7.7 10x10 10x10 10x10 25 40 50 81 216 238 254 6.3x5.8 6.3x5.8 6.3x7.7 8x10 10x10 10x10 35 38 48 63 116 216 238 6.3x5.8 6.3x7.7 8x10 10x10 10x10 42 57 92 151 216 50 6.3x5.8 6.3x7.7 8x10 8x10 10x10 30 120 140 170 310 Ripple current (mA rms) at 105 C, 120Hz Case size ODxL (mm) FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1kHz 10kHz Coefficient 0.70 1.00 1.17 1.36 1.50 65 CHIP TYPES Resistance to soldering heat