RECOMMENDED MOUNTING HOLE To 439 g2- MIN +.+4. 1.2 PN OSM JACK GASKET LOCKWASHER MOUNTING NUT 250 6.4 MAX PANEL THICKNESS 1.300 33.0 XXX = in 1. CAPTURED CENTER CONTACT REVISIONS REV DESCRIPTION DATE APERO VED KL 014} REVISED 7-12-96| 7/17/96 656 p 16.7 OST JACK HOUS I NG STAINLESS STEEL PER PASSIVATE PER MOUNT ING NUT ASTM-A484 AND _ASTM- aQ-P-35 LOCKWASHER A582, TYPE 303 DIELECTRIC TFE FLUOROCARBON N/A CENTER CONTACT PER ASTM-D-1457 BERYLLIUM COPPER PER GOLD PLATE PER ASTM-B-196 OR ASTM-B-197, MIL-G-45204 ALLOY C17300, CONDITION H GASKET FLUOROCARBON RUBBER PER N/A MIL-R-83248. TYPE 1. CLASS 1 COMPONENT MATERIAL FINISH DRAWN BY DATE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [= SA weet MAL M/A-COM, Inc. as ies Waltham, MA 02254 6d 2.005 ne APD BY is 73-8 Aan anp compa ov XX.X = mm (REF) These drawings and specifi- cations cre the property of M/A COM Interconnect Div. and shall not be reproduced or copied or used in whole or in part as the basis for the manufacture or sale o f Item(s) without written permission. TITLE USE ASS'Y PROCEDURE OST JACK TO OSM JACK BULKHEAD FEED THROUGH SIZE CODE DENT NO. no ap_N/A B | 26805 3784-2240-00 | 01, SCALE 331 SHEET 1 OF 1 CUSTOMER DRAWING TYCO PART # 1058800-1 SHEET 1 OF 1, REV A