Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180906
(1/4)
suppression-filter_commercial_vaf201610fa-1_en.fm
INDUCTORS
Noise suppression filter
For audio lines (Class-D amplifier noise suppression)
VAF-FA series
VAF201610FA-1 type
FEATURES
A compact noise suppression component for audio lines that accommodates high currents.
Distortions are greatly reduced during insertion with the adoption of newly-developed low distortion ferrite materials.
Small reductions in volume due to its low resistance, and optimal for devices that require high sound quality as the generating of sound
distortions is controlled.
High efficacy is put for high frequency noise suppression of class-D amplifier harmonics in 100MHz because of high damping property.
Operating temperature range: –40 to +105°C (including self-temperature rise)
APPLICATION
AI speakers, Bluetooth speakers, TV speakers
Application guides: Smart phones/tablets
PART NUMBER CONSTRUCTION
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
＊Equivalent measurement equipment may be used.
VAF 201610 F A - 131 - 1
Series name L×W×H dimensions Characteristics Internal code Impedance Marking
2.0×1.6×1.0 mm () at 100MHz
Impedance DC resistance Rated current Part No.
[100MHz]
()typ. ()max. ()typ. (A)max. (A)typ.
130 0.040 0.032 3.08 3.62 VAF201610FA-131-1
280 0.050 0.042 2.69 3.16 VAF201610FA-281-1
440 0.076 0.063 2.19 2.58 VAF201610FA-441-1
840 0.079 0.066 2.14 2.52 VAF201610FA-841-1
Measurement item Product No. Manufacturer
Impedance 4294A Keysight Technologies
DC resistance 34420A Hewlett-Packard
REACH
SVHC-Free
Lead
Free
RoHS
Pb
Halogen
Free
Br
Cl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180906
(2/4)
suppression-filter_commercial_vaf201610fa-1_en.fm
INDUCTORS
VAF201610FA-1 type
Z FREQUENCY CHARACTERISTICS
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
Measurement equipment
＊Equivalent measurement equipment may be used.
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
0
500
2000
1000
1500
131
281
841
441
Product No. Manufacturer
4294A Keysight Technologies
131
281
841
441
1 10 100 1000
Frequency (MHz)
Insertion loss (dB)
0
5
10
15
20
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180906
(3/4)
suppression-filter_commercial_vaf201610fa-1_en.fm
INDUCTORS
VAF201610FA-1 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
RECOMMENDED REFLOW PROFILE
PACKAGING STYLE
REEL DIMENSIONS
TAPE DIMENSIONS
PACKAGE QUANTITY
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
Dimensions in mm
1.0max.
2.0±0.2
1.6±0.2
(0.65)(
0.7)(
0.65)
Dimensions in mm
0.65 0.7 0.65
2.0
1.6
Natural
cooling
10s
60 to 120s
Preheating
30s
Soldering
230
°C
230
°C
260°C
180
°C
150
°C
Time
Peak
Temperature
Ty p e A B K
VAF201610FA-1 1.9±0.1 2.3±0.1 1.10±0.05
Package quantity 2000 pcs/reel
Operating
temperature range
Storage
temperature range
Individual
weight
–40 to +105 °C –40 to +105 °C 15 mg
ø180+0/–3
2.0±0.5
ø13±0.2
ø21±0.8
ø60+1/–0
13±1.4
Dimensions in mm
9.0±0.3
K
8.0±0.2
1.75±0.1
4.0±0.1
4.0±0.1
2.0±0.05
B
A
3.5±0.05
Dimensions in mm
Sprocket
hole 1.5
+0.1
–0
Cavity
0.25±0.05
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180906
(4/4)
suppression-filter_commercial_vaf201610fa-1_en.fm
INDUCTORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
REMINDERS
