160W Constant Voltage + Constant Current LED Driver (for DA Type only) SELV H B G - 1 6 0 P series 18 (except for DA Type) Features Constant Voltage + Constant Current mode output Circular shape PCB type design Built-in active PFC function Function options: output adjustable via potentiometer; 3 in 1 dimming; DAL I (for DA Type only) Applications LED bay lighting LED down lighting LED spot lighting LED mining lighting LED stage lighting Typical lifetime>50000 hours 5 years warranty Description HBG-160P series is a 160W AC/DC PCB type LED driver featuring the circular shape design. It operates from 90305VAC and offers the dual mode constant voltage and constant current output models with different rated voltage ranging between 36V and 60V. Thanks to the high efficiency up to 93.5%, with the fanless design, the entire series is able to operate for -40 ~ +45 under free air convection. HBG-160P is equipped with various function options, such as dimming methodology, so as to provide the optimal design flexibility for LED lighting system. Model Encoding HBG - 160P - 36 A Function options Rated output voltage(36/48/60V) PCB type Rated wattage Series name Type A B DA Function Io adjustable through built-in potentiometer. 3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance) DALI control technology. Note In Stock In Stock In Stock File Name:HBG-160P-SPEC 2018-12-06 160W Constant Voltage + Constant Current LED Driver H B G - 1 6 0 P series SPECIFICATION HBG-160P-36 MODEL DC VOLTAGE CONSTANT CURRENT REGION Note.2 RATED CURRENT RATED POWER Note.5 RIPPLE & NOISE (max.) Note.3 OUTPUT CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.4 LINE REGULATION LOAD REGULATION SETUP, RISE TIME Note.6 HOLD UP TIME (Typ.) VOLTAGE RANGE Note.5 FREQUENCY RANGE POWER FACTOR TOTAL HARMONIC DISTORTION INPUT EFFICIENCY (Typ.) Note.7 AC CURRENT INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER HBG-160P-48 36V 48V 21.6 ~ 36V 28.8 ~ 48V 4.4A 3.3A 158.4W 158.4W 300mVp-p 300mVp-p Adjustable for A-Type only (via built-in potentiometer) 1.98 ~ 3.3A 2.6 ~ 4.4A 2.0% 0.5% 1.0% 2500ms, 200ms / 115VAC 500ms, 200ms / 230VAC 12ms/115VAC,230VAC 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz PF0.98/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) HBG-160P-60 60V 36 ~ 60V 2.6A 156W 300mVp-p 1.6 ~ 2.6A THD< 20%(@load60%/115VC,230VAC; @load75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) 93.5% 93% 92% 1.7A / 115VAC 0.78A / 230VAC 0.7A / 277VAC COLD START 65A(twidth=550s measured at 50% Ipeak) at 230VAC; Per NEMA 410 4 units (circuit breaker of type B) / 7 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed PROTECTION 65 ~ 75V 41 ~ 47V 54 ~ 62V OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Note.13 Shut down o/p voltage, recovers automatically after temperature goes down Ta=-40 ~ +45 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 45) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750,CSA C22.2 No.250.13-12; ENEC EN61347-1,EN61347-2-13,EN62384, GB19510.1,GB19510.14,EAC TP TC 004 approved DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55015, EN61000-3-2 Class C (@load 60%) ; EN61000-3-3, GB17743, GB17625.1,EAC TP TC 020 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547,light industry level(surge immunity:Line-Earth:4KV,Line-Line:2KV),EAC TP TC 020 MTBF 195.5Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION Refer to mechanical specification 0.4Kg; 36pcs/15.4Kg/1.35CUFT PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. The DA type power supply is less efficient than the typical efficiency in specification by 1%. 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. 10. This series meets the typical life expectancy of >50,000 hours of operation when Ta is about 45 or less. 11. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 12. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 13. All functional testing must be filled with potting,including OTP function . File Name:HBG-160P-SPEC 2018-12-06 160W Constant Voltage + Constant Current LED Driver H B G - 1 6 0 P series BLOCK DIAGRAM fosc : 100KHz EMI FILTER & RECTIFIERS I/P POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER +V -V O.C.P. O.T.P. FG O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. DRIVING METHODS OF LED MODULE This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) 100 (B) Constant Current area (A) Constant Voltage area Should there be any compatibility issues, please contact MEAN WELL. 60 (min.) (C) Hiccup Protection 50 100 Io(%) Typical output current normalized by rated current (%) File Name:HBG-160P-SPEC 2018-12-06 160W Constant Voltage + Constant Current LED Driver H B G - 1 6 0 P series DIMMING OPERATION AC/L(Brown) AC/N(Blue) FG (Green/Yellow) -V(Black) +V(Red) SJTW 18AWG*3C ACL SJTW 18AWG*2C FG -V ACN +V D * DIM+ for B-Type DA+ for DA-Type * *DIM- for B-Type DA- for DA-Type K VR1 *DIM+(Blue) **DIM-(White) VR2 SVT 18AWG*2C 3 in 1 dimming function (for B-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.) Applying additive 1 ~ 10VDC 100% LED Strips -V + 90% + - - DIM+ + Output current (%) +V 80% 70% 60% 50% 40% Additive Voltage - 30% DIM- 20% 10% 1V "DO NOT connect "DIM- to -V" 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% LED Strips -V + 90% + - - DIM+ Additive PWM signal Output current (%) +V 80% 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to -V" 20% 10% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input File Name:HBG-160P-SPEC 2018-12-06 H B G - 1 6 0 P series 160W Constant Voltage + Constant Current LED Driver Applying additive resistance: 100% LED Strips -V 90% + - Output current (%) +V + - DIM+ Additive Resistance 80% 70% 60% 50% 40% DIM- 30% 20% "DO NOT connect "DIM- to -V" 10% 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity forsynchronizeddimmingoperation) Dimming input: Additive resistance Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N FG L Switch Relay Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HBG-160P B-Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. DALI Interface (primary side; for DA-Type) Apply DALI signal between DA+ and DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed at 8% of output. File Name:HBG-160P-SPEC 2018-12-06 160W Constant Voltage + Constant Current LED Driver H B G - 1 6 0 P series OUTPUT LOAD vs TEMPERATURE 100 230VAC LOAD (%) 80 230VAC Input only 100VAC 60 50 40 20 -40 -30 -10 0 15 30 40 45 50 70 (HORIZONTAL) AMBIENT TEMPERATURE, Ta () STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Constant Current Mode 100 90 70 PF LOAD (%) 80 60 50 40 90 100 125 135 145 155 165 175 180 200 230 1 0.98 0.96 0.94 0.92 0.9 0.88 0.86 0.84 0.82 0.8 0.78 277V 230V 115V 50% 305 60% 70% INPUT VOLTAGE (V) 60Hz 80% 90% 100% LOAD De-rating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HBG-160P series possess superior working efficiency that up to 93.5% can be reached in field applications. 48V Model 48V Model 25% 94 92 20% 15% 277V 10% 230V 115V 5% EFFICIENCY(%) THD 90 88 86 277V 84 230V 82 80 115V 78 76 0% 74 50% 60% 70% 80% LOAD 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HBG-160P-SPEC 2018-12-06 160W Constant Voltage + Constant Current LED Driver H B G - 1 6 0 P series MECHANICAL SPECIFICATION Unit:mm A type 34 1.6 32 124.6 30020 SJTW 18AWG*3C ACL SJTW 18AWG*2C FG -V ACN +V 35.75 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) -V(Black) +V(Red) 35.5 20020 3.5 29 D K Io.adj SVR1 VR1 VR2 4.25 40.25 3.5 B/DA type 34 1.6 32 ACL SJTW 18AWG*2C FG -V ACN +V 35.75 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) -V(Black) +V(Red) 124.6 30020 SJTW 18AWG*3C 35.5 20020 3.5 29 D K 30020 VR1 *DIM+(Blue) **DIM-(White) 3.5 4.25 * DIM+ for B-Type DA+ for DA-Type * *DIM- for B-Type DA- for DA-Type VR2 SVT 18AWG*2C 40.25 File Name:HBG-160P-SPEC 2018-12-06