Pb
RoHS
EMK43G2J-24.576M TR
EMK43 G 2 J -24.576M TR
Series
RoHS Compliant (Pb-free) 4 Pad 2mm x 2.5mm SMD
3.3Vdc LVCMOS MEMS Oscillator
Frequency Tolerance/Stability
±100ppm Maximum over -40°C to +85°C
Duty Cycle
50 ±5(%)
Packaging Options
Tape & Reel
Nominal Frequency
24.576MHz
Output Control Function
Power Down (Disabled Output: Logic Low)
ELECTRICAL SPECIFICATIONS
Nominal Frequency 24.576MHz
Frequency Tolerance/Stability ±100ppm Maximum over -40°C to +85°C (Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change,
First Year Aging at 25°C, 260°C Reflow, Shock, and Vibration)
Aging at 25°C ±1ppm Maximum First Year
Operating Temperature Range -40°C to +85°C
Supply Voltage 3.3Vdc ±10%
Input Current 20mA Maximum
Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH=-8mA)
Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL=+8mA)
Rise/Fall Time 2nSec Maximum (Measured from 20% to 80% of waveform)
Duty Cycle 50 ±5(%) (Measured at 50% of waveform)
Load Drive Capability 15pF Maximum
Output Logic Type CMOS
Output Control Function Power Down (Disabled Output: Logic Low)
Output Control Input Voltage +0.7Vdd Minimum or No Connect to Enable Output, +0.3Vdd Maximum to Disable Output
Standby Current 50µA Maximum (Disabled Output: Logic Low)
Peak to Peak Jitter (tPK) 250pSec Maximum, 100pSec Typical
Start Up Time 50mSec Maximum
Storage Temperature Range -55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 2, HBM 2000V
Flammability UL94-V0
Mechanical Shock MIL-STD-883, Method 2002, Condition G, 30,000G
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity Level J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003 (Pads on Bottom of Package Only)
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 1011, Condition B
Vibration MIL-STD-883, Method 2007, Condition A, 20G
www.ecliptek.com | Specification Subject to Change Without Notice | Rev J 2/20/2010 | Page 1 of 6