Power Supply, Primary Switch Mode, Narrow Design MINI-PS-100-240AC/2x15DC/1 MINI POWER provides: * Extra narrow widths of 22.5 and 45 mm (0.886 and 1.772 in.) * Global use due to a wide range input * A high level of operational safety in complex global networks * Reliable start up of heavy loads due to POWER BOOST The reliability of a power supply determines the availability of individual components in a system and whether complex systems can function safely. The globalization of markets increases the demands placed on the power supply. A wide range input and a high level of availability are required. These requirements are met by MINI POWER. 1. Brief Description MINI POWER is the extra narrow power supply, which is available in widths of 22.5 and 45 mm (0.886 and 1.772 in.). In addition to a 24 V version with output currents of 0.65 A and 2 A, special voltages are also available with 5 V/3 A and +/- 15 V/1 A. The POWER BOOST - a power reserve of up to 100% - ensures a reliable start of difficult loads. The high level of operational safety is also ensured in complex global networks. MINI POWER also operates in applications where static voltage dips, transient power supply failures or phase failure are common. Large capacitors ensure mains buffering of more than 20 ms at full load. 2. Area of Application MINI POWER can be used globally due to the consistent conversion of a wide range input. In this way, your entire system can be tested at any production location in the world and can be delivered to any location in the world without faulty switching of the input voltage. This reduces storage costs and logistical effort. An international approval package including UL 60950 for IT equipment and UL 508 for industrial control equipment enables the device to be used globally. Headquarters: (c) Phoenix Contact GmbH & Co. KG * Flachsmarktstrae 8 * 32825 Blomberg * Germany Phone +49 - 52 35 - 30 0 * Fax +49 - 52 35 - 34 12 00 * www.phoenixcontact.com Local contact: www.phoenixcontact.com/salesnetwork Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 3. Technical Data 114.5 L (+) NC NC OV OV 99 N (-) 45 MINI-PS-100-240AC/2x15DC/1 Uu 1 AC 8 mm (0.31 in.) solid 2 flexible [mm ] Input Output 0.2 - 2.5 0.2 - 2.5 AWG 0.2 - 2.5 24 - 14 0.2 - 2.5 24 - 14 torque [Nm] 0.5 - 0.6 0.5 - 0.6 Description Type Order No. Power Supply, primary switch mode, narrow design MINI-PS-100-240AC/2x15DC/1 29 38 74 3 Technical Data Input Data 1 Nominal input voltage(Current consumption) Input voltage range Frequency Current consumption (for nominal values) Inrush current limiting/I2t (+25C [+77F]) Mains buffering for a nominal load (typical) Switch-on time after applying the AC supply voltage Transient surge protection Input fuse, internal Recommended fuse 100 - 240 V AC (wide range input) 85 - 264 V AC (0.7-0.3A) 90 - 350 V DC (0.7-0.3A) 45 - 65 Hz 0 Hz 1.0 A (120 V AC) -0.5 A (230 V AC), approximately ) < 35 A/< 4 A2s, typical > 20 ms (120 V AC)/> 100 ms (230 V AC) <1s Varistor 2.5 AT (device protection) Circuit breaker 10 A or 16 A Characteristic B (EN 60 898) Output Data 2 Nominal output voltage UN/tolerance Setting range for the output voltage Output current during convection cooling and nominal values POWER BOOST IBOOST (t = 2, minutes [typical]) Nominal output current IN -25C to +60C (-13F to +140F) Derating Short-circuit current limit Startup of capacitive loads System deviation on: Load change static 10 - 90% Load change dynamic 10 - 90% Input voltage change 10% Maximum power loss No load/nominal load Level of efficiency (typical) Response time UOUT (10% - 90%) Residual ripple/switching peaks (20 MHz) Can be connected in parallel Internal surge protection Resistance to return supply Signal Output Data LED (Uout > 13.5 V DC = LED permanently on) 15 V DC/1% 2 x 15 V DC Up to 2 A (Uout = 2 x 15 V DC) 1 A (Uout = 2 x 15 V DC) From +60C (+140F), 5% per Kelvin IBOOST 2 A, approximately Unlimited < 1%, typical < 3%, typical < 0.1%, typical 1.7 W/6 W > 73% (for 230 V AC and nominal values) < 100 ms, typical < 100 mVpp (for nominal values) To increase redundancy and power Yes, limited to 20 V DC, approximately 17 V DC Green LED PHOENIX CONTACT page 2 of 8 Pcs. Pkt. 1 Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 General Data Isolation voltage: Input/output Approval package Safety transformers for switched-mode power supplies Electrical safety (of IT equipment) Industrial control equipment Equipping high voltage installations with electronic equipment Safety extra-low voltage Safe isolation Protection against dangerous shock currents, basic requirements for safe isolation in electrical equipment Limitation of harmonic line currents EN 61 558-2-17 EN 60950/VDE 0805 UL/C-UL Recognized UL 60 950 u 1) UL/C-UL Listed UL 508 U 1) LISTED EN 50 178/VDE 0160 (Surge Voltage Category III) PELV (EN 50 178) SELV (EN 60 950) VDE 0100-410 DIN VDE 0106-101 According to EN 61000-3-2 Mounting position Can be mounted with spacing - Vertical - Horizontal Degree of protection Class of protection MTBF Housing version Dimensions (W x H x D) Weight Climatic Data Ambient temperature Operation Storage Humidity Vibration Shock Degree of pollution Climatic category 4 kV AC/(type test)/3 kV AC (routine test) according to IEC 68-2-6 according to IEC 68-2-27 c Conforms to the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC EMC (Electromagnetic Compatibility) Noise Immunity According to EN 61000-6-2: 3) Electrostatic discharge (ESD) EN 61000-4-2 Housing Contact discharge: Air discharge: Electromagnetic HF field EN 61000-4-32) Fast transients (burst) EN 61000-4-43) Input: Output: Surge current loads EN 61000-4-53) Input: Housing Frequency: Field strength: Output: Conducted interference EN 61000-4-62) Voltage dips EN 61000-4-113) Simulation of radiophone EN 50204 I/O: Frequency: U0: Input: Frequency: Field strength: On horizontal NS 35 DIN rail according to EN 50022 8 cm (0.31 in.) 0 cm IP 20 , (in closed control cabinets) > 500 000 h according to IEC 1709 (SN 29 500) Polyamide PA, color green (45 x 99 x 114.5 mm [1.722 x 3.898 x 4.508 in.]) 0.25 kg, approximately -25C to +70C (-13F to +158F) (> +60C [+140F] derating) -40C to +85C (-40F to +185F) up to 95% at +25C (+77F), no condensation < 15 Hz, amplitude 2.5 mm/15 Hz - 150 Hz, 2.3 g 30 g all space directions 2 (according to EN 50 178) 3K3 (according to EN 60 721) 1) UL approval for AC input voltage and ambient temperatures of up to +60C (+140F) Requirements EN 61 000-6-2 MINI-PS-100-240AC/2x15DC/1 4 kV 8 kV Level 3 8 kV 8 kV 80 - 1000 MHz 10 V/m Level 3 80 - 1000 MHz/1.4 - 2.0 GHz 10 V/m 2 kV 2 kV asymmetrical5) asymmetrical5) 4 kV (Level 4) 2 kV (Level 3) 2 kV 1 kV 0.5 kV 0.5 kV asymmetrical5) symmetrical4) asymmetrical5) symmetrical4) 2 kV (Level 3) 1 kV (Level 3) 0.5 kV (Level 1) 0.5 kV (Level 1) asymmetrical5) Level 3 0.15 - 80 MHz 10 V 0.15 - 80 MHz 10 V 30% reduction of the input voltage for 0.5 periods See input data: Mains buffering > 20 ms Not required 900 MHz/1800 MHz 20 V/m Noise Emission According to EN 50081-2: Radio interference EN 55011 Class A6) EN 55011 (EN 55022) Class B7) Radio interference EN 55011 Class A6) EN 55011 (EN 55022) Class B7) EN 55011 corresponds to CISPR11/EN 55022 corresponds to CISPR22 EN 61000 corresponds to IEC 1000 2) Criterion A: Normal operating characteristics within the specified limits. 3) Criterion B: Temporary adverse effects on the operating characteristics that the device corrects 4) symmetrical: 5) Cable to cable asymmetrical: Cable to ground 6) Class 7) A: Class B: Industrial application Industrial and domestic applications PHOENIX CONTACT page 3 of 8 Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 4. Device View, Connections, and Control Elements 2 3 + 0V 15 T U O R - V PO 0V DC WE NI MI C D K O C ) A (V N 0 24 NC 010 NC IN ) (+ L 1 L NC NC N -25 - 25 ... + 60 C - 13 ... + 140 F INFORMATION TECHNOLOGY EQUIPMENT u Read installation instructions before connecting to mains INDUSTRIAL CONTROL EQUIPMENT 43KA www.interface.phoenixcontact.com TEMPERATURE APPROVALS LISTED U MINI-PS-100-240AC/2X15DC/1 8 Order No.: 29 38 74 3 7 Power Supply OUTPUT 6 INPUT AC: 100-240V +15V DC 50-60Hz 1% Range: 1A 85-264V 1.0-0.5A DC: 90-350V 1.0-0.5A 5 4 Figure 04 1 AC input: Input voltage 85 - 264 V AC Frequency 45 - 65 Hz (0.2 mm2 to 2.5 mm2 solid) (0.2 mm2 to 2.5 mm2 flexible) (24 - 14 AWG) Internal fuse 2.5 AT Recommended fuse 10 A or 16 A c.b./Characteristic B 2 DC output: Output voltage 15 V DC (default), (0.2 mm2 to 2.5 mm2 solid) (0.2 mm2 to 2.5 mm2 flexible) (AWG 24 - 14) The device is idling-proof and short-circuit-proof. 3 DC OK LED 4 Universal latching foot for EN DIN rails 5. Safety and Warning Instructions To ensure safe operation of the device and that all functions can be used, please read these instructions carefully. Installation and startup must only be carried out by qualified personnel. The relevant country-specific regulations (e.g., VDE, DIN) must also be observed. Before startup it is particularly important to ensure that: * The line has been connected correctly and protection is provided against electric shock. * The device can be switched off outside the power supply according to EN 60950 regulations (e.g., by the line protection on the primary side). * All supply lines have sufficient fuse protection and are the correct size. * All output cables are the correct size for the maximum device output current or have separate fuse protection. * Sufficient convection is ensured. MINI POWER is a built-in device. After installation the terminal area must be covered to provide sufficient protection against unauthorized access to live parts. This is ensured by installing the device in the control cabinet or distributor box. The device contains dangerous live components and high levels of stored energy. Caution: Never carry out work when the power is turned on, this is highly dangerous. PHOENIX CONTACT page 4 of 8 Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 6. Installation 6.1. Mounting The power supply can be snapped onto all DIN rails according to EN 50022-35. The device must be mounted horizontally (input terminals facing downwards). Installation Dimensions 5 6 7 8 + 0V To ensure sufficient convection, we recommend the following minimum spacing be used between modules: 0V - + MINI POWER OU 0V 0 T 1 V - 5V DC 8.0 cm (3.150 in.) for vertical installation DC OK IN L(+ 100 ) N -24 C 0V NC AC N() UT INP : 0V AC 0-24 z 10 0H : 50-6 nge Ra 64V 85-2-0.5A 1.0 C/1 5D X1 C/2 C 60 40A 3 + 0 F ... 00-2 74 - 25 ... + 14 S-1 38 I-Po.: 29 - 13 E IN R N M er ly ATU upp MPER Ord S r TE we ION AT Po -25 RM LOGY NO T INFO CH EN UT TE UIPM TP EQ OU LS AL C OVA STRI ns V D APPR INDUNTROENL T ct io ns COUIPM ru 15 ai st m EQ n in to 43KA m 1% .co la tio ng D TE 1A st al ec ti tact LIS u U ww d inco R ea fo re be nte w.i rfa nn ce.p hoe nix con : V DC -350A 90 -0.5 1.0 Figure 05 45 mm (1.772 in.) Installation depth 106 mm (4.173 in.) (+ DIN rail) 80 114.5 mm (4.508 in.) 106 mm (4.173 in.) MINI POWER 99 mm (3.898 in.) 0V 0V - OUT 15 V DC DC OK IN 100-240 V AC L(+) NC NC N(-) 80 259 mm (10.197 in.) + Figure 06 Mounting: Place the module with the DIN rail guideway on the top edge of the DIN rail and then snap it downwards. Mounting Removal Removal: Release the snap-on catch using a screwdriver and then detach the module from the bottom edge of the DIN rail. Figure 07 PHOENIX CONTACT page 5 of 8 Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 6.2. Connection of Various Types of Network: 100 - 240 V AC Networks TN-S network TN-C network TT network L PEN L N PE L N L N + - L N L + - MINI MINI N + - MINI Figure 08 2 + ER Flexible [mm2] 0.2 - 2.5 0.2 - 2.5 AWG 24 - 14 24 - 14 L NC NC N 8 6.3. Input (1, Figure 9) The 100 - 240 V AC connection is made using screw connections L and N. Protecting the Primary Side The device must be installed according to the specifications of EN 60 950. It must be possible to switch off the device using a suitable disconnecting device outside the power supply. For example, primary side line protection could be used. Additional device protection is not required, as an internal fuse is present. MINI-PS-100-240A 7 Power Supply OUTPUT 6 Order No.: 29 38 7 5 INPUT AC: 8 mm (0.31 in.) +15V DC 100-240V 1% 50-60Hz 1A Range: 85-264V 1.0-0.5A DC: 90-350V 1.0-0.5A For reliable and safe-to-touch connection: Strip 8 mm (0.31 in.) from the connector ends. Torque [Nm] 0.5 - 0.6 0.5 - 0.6 C ) A (V N 0 24 NC 010 NC IN ) (+ L 1 Input: 2 Output: Solid [mm2] 0.2 - 2.5 0.2 - 2.5 C D K O The following cable cross sections can be connected: - IP N MI 0V DC V OW 1 0V 15 T U O Connection Cable: The device is equipped with COMBICON connectors. This reliable user-friendly connection method enables quick device connection and safe isolation of the electrical connection, if required. Only operate connectors when the power is switched off. Figure 09 If the internal fuse is blown, this is most probably due to a device fault. In this case, the device should be checked in the factory. Recommended Fuse: Circuit breaker 10 A or 16 A, Characteristic B (or equivalent). A suitable fuse must be fitted for DC applications. PHOENIX CONTACT page 6 of 8 Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 6.4. Output (2 , Figure 9) The 15 V DC connection is made using the "0 V" and "-" screw connections on the screw-cage connection 2. Protecting the Secondary Side: The device is electronic short-circuit-proof and idlingproof. In the event of an error, the output voltage is limited to a maximum of 20 V DC. It should be ensured that all output cables are the correct size for the maximum output current or have separate fuse protection. The secondary side cables should have large cross sections to keep voltage drops on the cables to a minimum. UOUT [V] 2 x 15 W 2 x 30 W UN 15 < 60 C 1 2 IN IBOOST IOUT [A] DC OK LED The green DC OK LED enables local function evaluation in the control cabinet. LED on LED off a) Normal operation of the power supply The output voltage is 13.5 V DC. There is a secondary load short circuit or overload outside the POWER BOOST area. b) No AC supply voltage is present or there is a device fault. 7. Function 7.1. Output Characteristic Curve (Figure 10). The device can supply up to 2 A at 15 V DC output voltage for a few minutes (Pout = 2 x 30 W). With high loads, the working point demonstrates the U/I characteristic curve shown in Figure 10. The output current is limited to IBOOST. The secondary voltage is reduced until the short circuit on the secondary side is removed. The U/I characteristic curve ensures that both heavy capacitive loads and devices with DC/DC converters can be supplied by MINI POWER in the input circuit without any problems. Connected fuses are reliably tripped. The selectivity in your system configuration is ensured at all times. PHOENIX CONTACT page 7 of 8 Figure 10 Power Supply, Primary Switch Mode, Narrow Design - MINI-PS-100-240AC/2x15DC/1 UOUT = 15 V 7.4. Redundancy Operation Redundant connections are designed for supplying systems, which place particularly high requirements on operational safety. If a fault occurs in the primary circuit of device no. 1, device no. 2 automatically takes over the complete power supply without interruption and vice versa. For this purpose, the power supplies to be connected in parallel must be large enough that the total current requirements of all loads can be completely covered by one power supply. External decoupling diodes are required for 100% redundancy. 1 0 0 20 40 60 Ambient temperature [C] Figure 11 MINI 15V/ + 0V - 1A MINI 15V/ + 0V - 1A + 0V - = 1A + 0V - Figure 12 MINI 15V/ + 0V - 1A MINI 15V/ + 0V - 1A + 0V - = 2A + 0V - Figure 13 PHOENIX CONTACT 15.04.02 7.5. Power Increase The output current can be increased to n x IN where n is the number of devices connected in parallel. The parallel connection for power increase can be used to extend existing systems. A parallel connection is recommended if the power supply does not cover the current consumption of the most powerful load. Otherwise, the loads should be divided over independent individual devices. A maximum of five devices can be connected in parallel. POWER BOOST http://www.phoenixcontact.com 7.3. Parallel Operation Devices of the same type can be connected in parallel to increase both redundancy and power. The default setting does not have to be adjusted. To ensure symmetrical current distribution we recommend that all cable connections from the power supply to the DIN rail are the same length and have the same cross section. Depending on the system, for parallel connection of more than two power supplies a protective circuit should be installed at each individual device output (e.g., decoupling diode or DC fuse). This means that in the event of a secondary device fault high return currents are avoided. 2 TNR: 5107513-03 Output current [A] 7.2. Temperature Response At an ambient temperature of up to +60C (+140F) the device can supply an nominal current of 1 A. POWER BOOST is available for a few minutes. The output power must be decreased by 5% per Kelvin temperature increase for ambient temperatures over +60C (+140F). At ambient temperatures over +70C (+158F) or in the event of a thermal overload, the device switches off to protect itself. The device switches on again once it has cooled down. PHOENIX CONTACT page 8 of 8