1N4001 thru 1N4007 Vishay Semiconductors formerly General Semiconductor General Purpose Plastic Rectifier DO-204AL (DO-41) Reverse Voltage 50 to 1000V Forward Current 1.0A Features 1.0 (25.4) MIN. * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * Construction utilizes void-free molded plastic technique * Low reverse leakage * High forward surge capability * High temperature soldering guaranteed: 350C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) Mechanical Data Case: JEDEC DO-204AL, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 oz., 0.3 g 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. NOTE: Lead diameter is 0.026 (0.66) 0.023 (0.58) for suffix "E" part numbers Dimensions in inches and (millimeters) Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symb. 1N 4001 1N 4002 1N 4003 1N 4004 1N 4005 1N 4006 1N 4007 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V * Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V * Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 75C IF(AV) 1.0 A * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA = 75C IFSM 30 A * Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length TL = 75C IR(AV) 30 A Typical thermal resistance (1) RJA RJL 50 25 C/W TA +150 V TJ, TSTG -50 to +175 C * Maximum DC blocking voltage temperature * Operating junction and storage temperature range Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Maximum instantaneous forward voltage at 1.0A * Maximum DC reverse current at rated DC blocking voltage TA = 25C TA = 125C Typical junction capacitance at 4.0V, 1MHz VF 1.1 V IR 5.0 50 A CJ 15 pF Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted Document Number 88503 13-Jan-03 *JEDEC registered values www.vishay.com 1 1N4001 thru 1N4007 Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 30 60HZ Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.2 x 0.2" (5.0 x 5.0mm) Copper Pads 0.6 0.4 0.2 0.375" (9.5mm) Lead Length 0 TA = 75C 8.3ms Single Half Sine-Wave (JEDEC Method) 25 20 15 10 5.0 0 25 50 75 100 125 150 1 175 10 Ambient Temperature (C) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Characteristics 1,000 10 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 20 TJ = 25C Pulse Width = 300s 1% Duty Cycle 1 0.1 0.01 0.6 TJ = 150C 100 10 TJ = 100C 1 TJ = 25C 0.1 0.01 0.8 1.0 1.2 1.4 1.6 1.8 0 60 80 100 100 100 Transient Thermal Impedance (C/W) TJ = 25C f = 1.0MHZ Vsig = 50mVp-p 10 1 10 Reverse Voltage (V) www.vishay.com 2 40 Fig. 6 - Typical Transient Thermal Impedance Fig. 5 - Typical Junction Capacitance 1 0.1 20 Percentage of Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Junction Capacitance (pF) 100 Number of Cycles at 60HZ 100 10 1 0.1 0.01 0.1 1 10 100 t -- Pulse Duration (sec) Document Number 88503 13-Jan-03