Programming
Board features mikroProg for Tiva™ programmer and debugger. All you need to do
is plug the USB cable into ICDI connector and use mikroProg Suite for ARM or other
programming software to upload new device firmware.
Compilers
mikromedia 5 for Tiva is fully supported
by mikroC, mikroBasic and mikroPascal compilers for ARM. Compilers come with
dozens of examples that demostrate every feature of the board.
GUI design with Visual TFT
Easily create fantastic colourful graphical user interfaces (GUI) for mikromedia in
Visual TFT software. Even total beginners will be able to create amazing
applications.
Package Contains
Damage resistant protective box
mikromedia 5 for Tiva™ board
USB cable, Ethernet cable and two 1x26 headers
Plastic Pen, microSD card 2GB and 4 distancers
Documentation
Downloads
Powerful Workhorse
Mighty TM4C129xNCZAD rocks: 120
MHz operation, 1 MB of Flash, 256 KB
of SRAM, µDMA controller, on-chip
LCD controller and a lot more.
5” Touch Screen
Huge touchscreen in 800x480px
resolution brings awesome graphics
and vivid colors. You’ve never seen
such a big display driven just by a
microcontroller.
CC3100 WiFi module
Internet of things - check! Insanely
popular CC3100 WiFi module is right
here for you. It features easy to use
SimpleLink IPv4 TCP/IP stack.
Debugger on board
For the first time, we’re embedding
programmer and debugger on
mikromedia board. Just plug in the
USB cable and there you go!
mikroProg Suite for ARM® software
mikroProg for Stellaris® and TIVA™ Drivers
mikromedia 5 for Tiva User Manual