PE3345BW-FREQ-T250 - Pletronics, Inc.

to specifications per the terms of the Pletronics standard warranty. Production

processsing does not necessarily include testing of all parameters.

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

Do Not Use for New Designs - use PE55 or PE77

• Pletronics’ PE3XB Series is a quartz crystal

controlled precision square wave generator

with an PECL output.

• Solder pad compatible with many 9x14 Plastic

J lead packages.

• FR4 base with a mechanical metal cover.

• Tape and Reel packaging is available.

• 1 to 250 MHz

• 9.9 mm x 13.97 mm ‘B’ package

• Enable/Disable Function:

PE33B on pad 2

PE37B on pad 1

• Low Jitter

Pletronics Inc. certifies this device is in accordance with the

RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.

Pletronics Inc. guarantees the device does not contain the following:

Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s

Weight of the Device: 1.34 or .66 grams

Moisture Sensitivity Level: 1 As defined in J-STD-020C

Second Level Interconnect code: e4

Absolute Maximum Ratings:

Parameter Unit

VCC Supply Voltage -0.5V to +6.5V

Vi Input Voltage -0.5V to VCC + 0.5V

Vo Output Voltage -0.5V to VCC + 0.5V

Thermal Characteristics

The maximum die or junction temperature is 155oC

The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane

and construction of the PCB.

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 2

Part Number:

PE3x 45 B E W -125.0M -XX Part Marking:

Packaging code or blank

T250 = 250 per Tape and Reel

T500 = 500 per Tape and Reel

T1K = 1000 per Tape and Reel

PLE PE77

FFFFFM

C YMDXX

Frequency in MHz

Supply Voltage VCC

W = 2.5V +_ 10%

Optional Enhanced OTR

Blank = Temp. range -10 to +70oC

E = Temp. range -40 to +85oC

Series Model

Frequency Stability

45 = +_ 50 ppm

44 = +_ 25 ppm

20 = +_ 20 ppm

Series Model

x is 3 = E/D on pad 2

x is 7 = E/D on pad 1

Legend:

PLE = Pletronics The marking is on the cover of the PE77 device

FFFFFM = Frequency in MHz The marking is that of the PE77 device

YMD or YYWW = Date of Manufacture (Year - month - day or year and week)

All other marking is internal factory codes

Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not

identified from the marking. External packaging labels and packing list will correctly identify the ordered

Pletronics part number.

Codes for Date Code YMD

Code 6 7 8 9 0 1 2

Year 2006 2007 2008 2009 2010 2011 2012

Code A B C D E F G H J K L M

Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Code123456789ABC

Day 123456789101112

Code D E F G H J K L M N P R

Day 13 14 15 16 17 18 19 20 21 22 23 24

Code T U V W X Y Z

Day 25 26 27 28 29 30 31

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 3

Electrical Specification for 2.50V +_5% over the specified temperature range

Item Min Max Unit Condition

Frequency Range 1 250 MHz

Frequency Accuracy “45"-50 +50 ppm For all supply voltages, load changes, aging for 1

year, shock, vibration and temperatures

“44"-25 +25

“20"-20 +20

Output Waveform PECL /ECL

Output High Level (0oC to 85oC) 1.475 1.760 volts Referenced to Ground, VCC = 2.5 V

0.975 1.260 volts Referenced to termination voltage, VCC = 2.5 V

-1.025 -0.740 volts Referenced to Vcc, VCC = 2.5 V

Output High Level (-40oC) 1.415 1.620 volts Referenced to Ground, VCC = 2.5 V

0.915 1.12 volts Referenced to termination voltage, VCC = 2.5 V

-1.085 -0.88 volts Referenced to Vcc, VCC = 2.5 V

Output Low Level (0oC to 85oC) 0.690 1.095 volts Referenced to Ground, VCC = 2.5 V

0.190 0.595 volts Referenced to termination voltage, VCC = 2.5 V

-1.810 -1.405 volts Referenced to Vcc, VCC = 2.5 V

Output Low Level (-40oC) 0.670 1.195 volts Referenced to Ground, VCC = 2.5 V

0.170 0.695 volts Referenced to termination voltage, VCC = 2.5 V

-1.830 -1.305 volts Referenced to Vcc, VCC = 2.5 V

Output Symmetry 45 55 % at 50% point of VCC (See load circuit)

Jitter - 0.13 pS RMS 12 KHz to 20 MHz from the output frequency

- 2.8 pS RMS 10 Hz to 1 MHz from the output frequency

Output TRISE and TFALL - 0.7 nS Vth is 20% and 80% of waveform

VCC Supply Current (ICC)-90mA

Enable/Disable Internal Pull-up 50 - Kohm to VCC

V disable - 0.6 volts Referenced to pad 3

V enable 1.7 - volts Referenced to pad 3

Output leakage VOUT = VCC -10 +10 uA Pad 1 low, device disabled

VOUT = 0V -10 +10 uA

Enable time - 10 nS Time for output to reach a logic state

Disable time - 10 nS Time for output to reach a high Z state

Start up time - 10 m S Time for output to reach specified frequency

Operating Temperature Range -10 +70 oC Standard Temperature Range

- 40 +85 oCExtended Temperature Range “E” Option

Storage Temperature Range -55 +125 oC

Standby Current ICC - 3 uA Pad 1 low, device disabled

Specifications with E/D pad open circuit

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 4

-160

-140

-120

-100

-80

-60

-40

-20

0

10 1,000 100,000 10,000,000

Frequency (Hz)

dBc/Hz

Showing Out Measurement only

Trise

Symmetry

20%

Vlow

50%

80%

Vhigh

Tfall

Out*

Out

Typical Phase-Noise Response

Load Circuit

E/D shown on pad 1 for PE37B, will be on pad 2 for PE33B

Test Waveform

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 5

Reliability: Environmental Compliance

Parameter Condition

Mechanical Shock MIL-STD-883 Method 2002, Condition B

Vibration MIL-STD-883 Method 2007, Condition A

Solderability MIL-STD-883 Method 2003

Thermal Shock MIL-STD-883 Method 1011, Condition A

ESD Rating

Model Minimum Voltage Conditions

Human Body Model 1500 MIL-STD-883 Method 3115

Charged Device Model 1000 JESD 22-C101

Package Labeling

Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)

Font is Courier New Font is Arial

Bar code is 39-Full ASCII

The label does show the PE3 full part number

Layout and application information

Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both

input pads

For Optimum Jitter Performance, Pletronics recommends:

• a ground plane under the device

• no large transient signals (both current and voltage) should be routed under the device

• do not layout near a large magnetic field such as a high frequency switching power supply

• do not place near piezoelectric buzzers or mechanical fans.

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 6

5 4

32

6

1

Mechanical:

Inches mm

FR4 PCB Base:

Solder masked

All via holes tented on bottom

Copper Clad ½ oz. Typical

Gold plated 0.02 µinch (0.5 µm)

Label:

Laser engraved on the 5x7 mm

oscillator that is mounted on the

FR4 base

Pin 3 Ground plane is typical

Not to scale

A 0.380 +_0.010 9.65 +_0.25

B 0.550 +_0.010 13.97 +_0.25

C 0.134 +_0.010 3.40 +_0.25

D10.062 1.57

E10.050 1.27

F10.028 R 0.72 R

G10.180 4.57

H10.100 2.54

I10.050 1.27

J10.015 0.38

1 Typical Dimensions

PE33

Pad PE37

Pad Function Note

2 1 Output

Enable/Disable When this pad is not connected the oscillator shall operate.

When this pad is <0.30 volts, the output will be at a steady, non switching state.

Recommend connecting this pad to VCC if the oscillator is to be always on.

1 2 No connect There is no internal connection to this pad

3 Ground (GND)

4 Output The outputs must be terminated, 100 ohms between the outputs is the ideal

termination.

When the device is disabled, the Output will be an active logic low and the

Output* will be an active logic high.

The outputs can not be “wire-ORed” with other oscillators or signal generators

5 Output*

6 Supply Voltage

(VCC)Recommend connecting appropriate power supply bypass capacitors as close as

possible.

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 7

Mechanical (obsolete version):

The cover is no longer being supplied over this part. This part is made with a hermetically sealed

PE99xxDV series oscillator. This part is now exposed.

The cover has been deleted, the cover was causing problems with the newer high temperature RoHS lead

free processes. The cover purpose was only cosmetic.

All parts with 2008 date codes will be made in the new fashion.

There is no change in electrical properties.

Pletronics does recommend that all designs should transition to the PE99xxDV ceramic part.

Inches mm

FR4 PCB Base:

Solder masked

All via holes tented on bottom

Copper Clad ½ oz. Typical

Gold plated 0.02 µinch (0.5 µm)

Label:

White Kapton with Black Letters

–or--

Blue Epoxy heat cure ink covering

top with laser marked lettering

Cover:

Centered on the base

304 Stainless Steel

0.010 inch (0.25µm)

Electroless Nickel Plated

1 µinch (25 µm) typical

Pin 3 Ground plane is typical

Not to scale

B 0.550 +_0.010 13.97 +_0.25

A 0.390 +_0.010 9.90 +_0.25

C 0.105 +_0.010 2.67 +_0.25

D10.026 typ. 0.66

E10.050 1.27

F10.028 R 0.72 R

G10.180 4.57

H10.100 2.54

I10.050 1.27

J10.015 0.38

K10.380 9.65

• The package is not hermetically sealed.

• The sides are intentionally left open to permit cleaning material to freely flow in the package, thus

minimizing the accumulation of contaminants during cleaning processes.

• The internal part of the package must be thoroughly dry before operating.

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 8

245°C Maximum

10 Seconds Maximum

Allowed rate of temperature change

Maximum 4°C per second

Approximately 50 Seconds

215°C±10°C

120 to 160 Seconds

250

200

150

100

Temperature (°C)

175°C±10°C

Reflow Cycle (typical for lead free processing)

The part may be reflowed 2 times without degradation.

Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250

Constant Dimensions Table 1

Tape

Size D0 D1

Min E1 P0 P2 S1

Min T Max T1

Max

8mm

1.5

+0.1

-0.0

1.0

1.75

+_0.1

4.0

+_0.1

2.0

+_0.05

0.6 0.6 0.1

12mm 1.5

16mm 1.5 2.0

+_0.1

24mm 1.5

Variable Dimensions Table 2

Tape

Size B1

Max E2 Min F P1 T2

Max W

Max Ao, Bo

& Ko

24 mm 12.1 14.25 7.5 +_0.1 16.0 +_0.1 8.0 16.3 Note 1

Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale

REEL DIMENSIONS

A inches 7.0 10.0 13.0

mm 177.8 254.0 330.2

B inches 2.50 4.00 3.75

mm 63.5 101.6 95.3 Tape

Width

C mm 13.0 +0.5 / -0.2

D mm --- --- 24.4

+2.0

-0.0

24.0

Reel dimensions may vary from the above

PE3XB Series 2.5 V

PECL Clock Oscillators

January 2008

www.pletronics.com 425-776-1880 9

IMPORTANT NOTICE

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and

other changes to this product at anytime. PLE reserves the right to discontinue any product or service

without notice. Customers are responsible for obtaining the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to

PLE’s terms and conditions of sale supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance

with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE

deems necessary to support this warranty. Except where mandated by specific contractual documents,

testing of all parameters of each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are

responsible for their products and applications using PLE components. To minimize the risks associated

with the customer products and applications, customers should provide adequate design and operating

safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support

applications, devices or systems or other critical applications that may involve potential risks of death,

personal injury or severe property or environmental damage. Inclusion of PLE products in such

applications is understood to be fully at the risk of the customer. Use of PLE products in such applications

requires the written approval of an appropriate PLE officer. Questions concerning potential risk

applications should be directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE

patent right, copyright, artwork or other intellectual property right relating to any combination, machine or

process which PLE product or services are used. Information published by PLE regarding third-party

products or services does not constitute a license from PLE to use such products or services or a warranty

or endorsement thereof. Use of such information may require a license from a third party under the

patents or other intellectual property of the third party, or a license from PLE under the patents or other

intellectual property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is

without alteration and is accompanied by associated warranties, conditions, limitations and notices.

Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not

responsible or liable for such altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by

PLE for that product or service voids all express and implied warranties for the associated PLE product or

service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics Inc. Tel: 425-776-1880

19013 36th Ave. West Fax: 425-776-2760

Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com

URL: www.pletronics.com