Photoelectric Sensors Omron Smart Solutions Subminiature low-cost sensor with builtin amplifier detects positioning and presence/ absence in space-confined installations. Accurately detect PET bottles and transparent material. Omron offers sensors to solve many packaging-related problems. Save space with two fiber-optic amplifiers in a slim body; it offers large digital display and one-button teaching; over 100 sensing head/cables available. Rugged IP67-rated diffuse sensor detects objects of any color, texture or glossiness from any direction using programmable foreground and background suppression. 1 IAmsg1-44.indd 1 1/5/07 12:57:43 PM Photoelectric Sensors E3Z Dimensions mm (in) 31 H x 10.8 W x 20 D (1.22 x 0.43 X 0.79) E3Z-B E3T 31 H x 10.8 W x 20 D (1.22 x 0.43 x 0.79) 31 H x 10.8 W x 20 D (1.22 x 0.43 x 0.79) 19 H x 12 W x 4 D (0.74 x 0.47 x 0.15) Built-in DC amplifier Built-in DC amplifier Built-in DC amplifier * Foreground/background suppression * Pre-wired 2 m cable or M8 connector * Distance settable * Stable sensing regardless of target's color * Detects PET bottles * Micro-miniature space saving * Watertight IP67 * Pinpoint beam for detection of extremely small targets * 1 meter range * Hyper LED smallest visible red LED * Flat and rectangular body styles * CE conformance Through-beam sensing 15 m (49.2 ft) distance - - 1 m (3.28 ft) Retroreflective sensing 4 m (13.12 ft) distance - 500 mm - 2 m depends on reflector Polarized: 200 mm (7.88 in) 20 mm to 200 mm (BGS) 40 mm to 200 mm (FGS) - 30 mm (1.18 in) 15 mm on certain convergent beam models - - - 12 to 24 VDC 12 to 24 VDC 12 to 24 VDC - - - NPN or PNP NPN or PNP NPN or PNP 100 mA max. 100 mA max. 50 mA max. at 24 VDC - - - Operation or reset: 1 ms max. Operation or reset: 1 ms max. 2 ms ON/OFF Denatured polyallylate PBT plastic - - Denatured polyallylate PBT plastic - - Polycarbonate PBT plastic - Polycarbonate IEC 60529 IP67, 1200 PSI (NEMA ICS5, ANNEXF) IEC 60529 IP67, 1200 PSI (NEMA ICS5, ANNEXF) IP67 Red LED (680 nm) Red LED (680 nm) Red "Pin Point" LED (670 nm) Reverse polarity, output short-circuit Reverse polarity, output short-circuit Load short circuit and reverse polarity Yes Yes On all except through-beam models Light-ON / Dark-ON switch selectable Light-ON / Dark-ON switch selectable Light-ON / Dark-ON separate models General purpose; Material handling; Packaging; Background suppression PET bottles and transparent objects Flat or rectangular microminiature package; Washdown environments; Pinpoint beam for extremely small target detection; CE conformance; Latest generation technologies Amplifier type Built-in DC amplifier Features * Sub-miniature sensor offers long sensing distances and high noise immunity * IP67 rated * Connector models available Diffuse reflective sensing 1 m (3.28 ft) or distance 5 to 100 mm (0.2 to 3.94 in) PHOTOELECTRIC SENSORS E3Z-LS Color sensing - Supply voltage 12 to 24 VDC AC control output - DC control output type NPN or PNP Max. load 100 mA Alarm - Response time 1 ms max. Materials: Lens Case Bracket Cover Denatured polyallylate PBT plastic - - Enclosure rating IP67, 1200 PSI (NEMA ICS5, ANNEXF) Light source Pulse modulated infrared LED (860 nm) or visible red LED (680 nm) Circuit protection Load short circuit and reverse polarity Mutual interference On all except through-beam protection models Operation mode Light-ON / Dark-ON switch selectable Applications General purpose sensing; Sub-miniature, long detection distances, noise immunity; IP67 rated; CE approved 2 IAmsg1-44.indd 2 1/5/07 12:58:31 PM Photoelectric Sensors E3NT Dimensions mm (in) 88.7 H x 27 W x 65.1 D (3.49 x 1.06 x 2.56) E3F2 E3G-L1/L3 E3S-A 40 H x 18.4 W x 27 D (1.57 x 0.72 x 1.06) 22.3 H x 12.4 W x 44 or 50 D (0.88 x 0.49 x 1.73 or 1.97) Built-in AC or DC amplifier Built-in DC amplifier Built-in DC amplifier * Rugged stainless, nickel plate brass, and plastic models are chemical resistant * Wide operating voltage range * AC/DC * UL, CSA, CE certified * Connector models available * Distance settable pinpoint beam * TEACH mode for reliable detection of minute objects any color, material, or glossiness * IP67; NEMA 4; CE approved * Fast response time * Selectable Light-ON / Dark-ON operation * Alarm output indicates deteriorating sensing conditions * Timer versions available Through-beam sensing - distance To 7 m (22.97 ft) - 7 m (23 ft) Retroreflective sensing - distance To 2 m (6.56 ft) - Polarized: 0.1 to 2 m (0.33 to 6.56 ft) To 300 mm (11.81 in) 5 to 200 mm (0.19 to 7.87 in) 0 to 100 mm (0 to 3.94 in) 10 to 200 mm (0.04 to 7.87 in) 0 to 700 mm (0 to 27.56 in) - - - 24 to 240 VAC 50/60 Hz. or 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC SCR 200 mA max. - - NPN/PNP separate models NPN or PNP NPN or PNP 100 mA max. at 30 VDC 100 mA max. at 30 VDC 100 mA max. at 30 VDC - - 50 mA max. NPN/PNP 30 ms AC models; 2.5 ms DC models 1.5 ms or 2.5 ms model dependent 0.5 ms max. Plastic ABS or nickel-plated brass or stainless steel - Acrylic (PMMA) PBT plastic Stainless steel 304 - Denatured polyarylate PBT plastic Stainless steel - NEMA 1, 2, 4 (indoor) IP66 AC models; IP67 NEMA 6 Metal versions, IP66 NEMA 4 Plastic IP67 NEMA 4 NEMA 4X, 6, IP67 Infrared LED or Red LED Infrared LED (860 nm) or red LED (670 nm) Pulse modulated red and infrared LED Reverse polarity, short circuit on DC power supply models only Short-circuit, reverse polarity Load short circuit and reverse polarity - Yes On all except through-beam models Light-ON / Dark-ON selectable with control wire Light-ON / Dark-ON switch selectable Light-ON / Dark-ON switch selectable General purpose sensing; Chemical resistant ABS version; Stainless or nickel-plated brass versions; Connector types; Cylindrical design; M18 mounting Food and Bev, material handling, packaging applications; Multiple object detection General purpose sensing; Washdown environment; Miniature size; High speed sensing 0.5 ms; Timers, vertical or horizontal mount versions Amplifier type Built-in DC amplifier Features * Programmable BGS/FGS diffuse sensor * Digital, software configurable * Detects any color, texture, or glossiness from any direction * Double-triangulated optics * Rugged housing withstands extreme environment Diffuse reflective sensing 0.2 m to 2 m distance Color sensing - Supply voltage 10 to 30 VDC AC control output - DC control output type NPN or PNP or complementary Max. load 100 mA max. Alarm Yes Response time 2.5 ms Materials: Lens Case Bracket Cover Housing: Powder-coated aluminum Front pane: Glass Keyboard: HTV silicone Seals: RTV silicone Enclosure rating IP67 (EN 60529/IEC 529) Light source Infrared LED (850-880 nm) Circuit protection Reverse polarity, overload, short-circuit Mutual interference Yes protection Operation mode Light-ON / Dark-ON programmable Applications Extreme conditions; Food & Beverage; Packaging; Material Handling; Car wash PHOTOELECTRIC SENSORS 18.5 dia. x 65 L (0.73 x 2.56) 3 IAmsg1-44.indd 3 1/5/07 12:58:42 PM Photoelectric Sensors E3X-DAN/DAB Dimensions mm (in) 31.5 H x 10 W x 64.3 D (1.24 x 0.39 x 2.53) E3X-MDA E3X-NA 32 H x 10 W x 70 D (1.26 x 0.39 x 2.75) 32 H x 10 W x 70 D (1.26 x 0.39 x 2.75) -NA(R)(R), -NA(R)(R)F, -NAG(R)(R): 31.5 H x 10 W x 64.3 D (1.24 x 0.39 x 2.53) -NA(R)(R)V: 33 H x 12 W x 81.5 D (1.29 x 0.47 x 3.21) All purpose fiber-optic amplifier All purpose fiber-optic amplifier Fiber-optic amplifier * Power tuning * Dual digital display * 4 element LED * 2 independent outputs * Counter function * Power tuning * Dual digital display * 4 element LED * 2 channel amplifier * AND/OR control output * Master/slave connector design affords connectivity up to 16 amplifiers * Wire saving amplifiers reduce installation time and minimize space requirements * LED bar display * Mutual interference protection * Excellent response time * M8 connector ready models and water resistant models Through-beam sensing Varies depending on the model distance and fiber chosen Varies depending on the model and fiber chosen Varies depending on the model and fiber chosen Varies depending on the model and fiber chosen Retroreflective sensing Varies depending on the model distance and fiber chosen Varies depending on the model and fiber chosen Varies depending on the model and fiber chosen Varies depending on the model and fiber chosen Diffuse reflective sensing Varies depending on the model distance and fiber chosen Varies depending on the model and fiber chosen Varies depending on the model and fiber chosen Varies depending on the model and fiber chosen Yes Yes Yes (E3X-NAG11/NAG41) 12 to 24 VDC 10%, Ripple (P-P) 10% max. 12 to 24 VDC 10%, Ripple (P-P) 10% max. 12 to 24 VDC - - - DC control output type NPN or PNP NPN or PNP NPN or PNP NPN or PNP Max. load 50 mA max. 50 mA max. 50 mA max. 50 mA max. - - - 48 s Standard mode: 1 ms -NA(R)(R), -NA(R)(R)V, -NAG(R)(R): 200 s; -NA(R)(R)F: 50 s - PBT plastic - Polycarbonate - PBT plastic - Polycarbonate - PBT plastic - Polycarbonate (-NA(R)(R)) Polyethersulfone (E3X-NA(R)(R)V) IP50 IP50 -NA(R)(R), -NA(R)(R)F, -NAG(R)(R): IP50; -NA(R)(R)V: IP66 Red, green and blue LEDs available Red LED -NA(R)(R), -NA(R)(R)V, -NA(R)(R)F: Red LED; -NAG(R)(R): Green LED Short circuit, reverse polarity Short circuit, reverse polarity Reverse polarity; Output shortcircuit; Mutual interference; -NA(R)(R)F: Reverse polarity; Output short-circuit Yes Yes Yes Light-ON / Dark-ON switch selectable Light-ON / Dark-ON selectable Light-ON / Dark-ON (switch selectable) Amplifier type All purpose fiber-optic amplifier Features * User selectable displays: digital, percentage and analog display * Available in digital or dual analog/digital output * Digital display can be read right-side-up regardless of amplifier orientation PHOTOELECTRIC SENSORS E3X-DA-S Color sensing Yes Supply voltage 12 to 24 VDC AC control output - Alarm - Response time Standard mode: 1 ms High-speed mode: 250 s Long-distance mode: 4 ms Materials: Lens Case Bracket Cover - PBT plastic - Polycarbonate Enclosure rating IP50/IP66 Light source Red LED Circuit protection Short circuit, Reverse polarity Mutual interference Yes protection Operation mode Light-ON / Dark-ON switch selectable Applications All purpose, high speed, mark sensing, transparency detection, color discrimination, delicate level difference, minute object, high-precision positioning All purpose, high speed, mark All purpose, high speed, mark sensing, transparency detection, sensing color discrimination, delicate level difference, minute object, highprecision positioning General purpose, high speed, mark sensing 64 IAmsg1-44.indd 4 1/5/07 12:58:49 PM Over 100 Fiber-Optic Sensor Cables One exactly matches your requirements Constant Flexing Applications The special construction of these fiber-optic cables resists breaking and enables them to withstand the punishing effects of constant flexing or tight bending. The stranded fiber core can be bent to a radius as small as 4 mm with no loss in light intensity. They are ideal for use on moving and articulating equipment such as robotic arms. Available Models Through-Beam E32-T11 (680 mm sensing distance, M4 threaded head) E32-T21 (200 mm sensing distance, M3 threaded head) E32-T22B (200 mm sensing distance, 1.5 mm dia. head) Diffuse E32-D11 (170 mm sensing distance, M6 threaded head) E32-D21 (30 mm sensing distance, M3 threaded head) E32-D21B (70 mm sensing distance, M4 threaded head) E32-D22B (30 mm sensing distance, 1.5 mm dia. head) Chemical Resistant Applications Through-Beam E32-T11F (2000 mm sensing distance, 7.2 mm dia. head) E32-T12 F (3000 mm sensing distance, 5 mm dia. head) E32-T14F (400 mm sensing distance, 5 mm dia., side view head) E32-T81F-S (700 mm sensing distance, 6 mm dia. head, to 200C) Diffuse E32-D12F (95 mm sensing distance, 6 mm dia. head) High Temperature Applications Omron offers a variety of heat resistant fiber optic cables that can operate reliably in temperatures up to 400C (752F). The fluororesin and armored stainless steel sheaths protect the fibers for use in ovens and other high heat applications. PHOTOELECTRIC SENSORS Teflon(R) coated fiber optic cables provide long lasting reliability in sensing environments where corrosive fluids and gasses are present. They are designed for use where strong chemicals are manufactured or being used for processing or cleaning. Available Models Available Models Through-Beam E32-T51 (760 mm sensing distance, M4 threaded head, to 150C) E32-T54 (230 mm sensing distance, 2 mm dia., side view head, to 150C) E32-T61-S (450 mm sensing distance, M4 threaded head, stainless steel sheath, to 350C) E32-T84S-S (1300 mm sensing distance, 3 mm dia. L-shaped head, to 200C) Diffuse E32-D51 (230 mm sensing distance, M6 threaded head, to 150C) E32-D61-S (90 mm sensing distance, M6 threaded heads, stainless steel sheath, to 350C) E32-D73-S (60 mm sensing distance, M4 threaded head, stainless steel probe, to 400C) E32-D81R-S (90 mm sensing distance, M6 threaded head, to 200C) 5 7 IAmsg1-44.indd 5 1/5/07 12:59:03 PM Wide Area Sensing Applications Applications that require a larger target area for sensing small, randomly positioned objects are ideal for Omron's wide area sensing fiber optic cables. They project a wide plane of light that can detect very small objects anywhere within the width of the beam. Use them for detecting pills in packaging and similar applications. Precise Positioning Applications PHOTOELECTRIC SENSORS When it is critical to position objects or machinery accurately and consistently, Omron provides a solution with a unique coaxial cable design that surrounds the light emitting fiber with light detection fibers. Detect Minute Objects Available Models Through-Beam E32-M21 (610 mm sensing distance, four M3 heads) E32-T16 (2800 mm sensing distance, 10 mm wide beam) E32-T16P (1100 mm sensing distance, 11 mm wide beam) E32-T16W (1800 mm sensing distance, 30 mm wide beam) E32-T16J (1000 mm sensing distance, 11 mm wide beam, side view) Diffuse E32-D36P1 (100 mm sensing distance, 10.85 mm wide beam) Available Models Diffuse E32-CC200 (300 mm sensing distance, M6 threaded head, 16 receivers) E32-D32L (150 mm sensing distance, 3 mm dia. head, 16 receivers) E32-D32 (75 mm sensing distance, 2 mm dia. head, 4 receivers) E32-C31 (75 mm sensing distance, M3 threaded head, 4 receivers) E32-C41 (35 mm range, M3 threaded head, 6 receivers) E32-C42 (35 mm range, 2 mm dia. head, 6 receivers) Available Models Detect extremely small objects, as small as 0.5 mm, in very spacerestricted areas. Most are available with bendable "probe" tips that let you mount the head away from the detection area and bend the probe tip to the precise sensing area. Through-Beam E32-T22 (220 mm sensing distance, 2 mm dia. head) E32-TC200B (760 mm sensing distance, 1.2 mm dia. head, probe tip) E32-TC200E (220 mm sensing distance, M3 threaded head) E32-TC200F (220 mm sensing distance, 0.9 mm dia. head, probe tip) Diffuse E32-DC200B (300 mm sensing distance, 2.5 mm dia. head, probe tip) E32-DC200E (80 mm sensing distance, M3 threaded head) E32-DC200F (80 mm sensing distance, 1.2 mm dia. head, probe tip) E32-D33 (16 mm sensing distance, 0.8 mm dia. head, probe tip) E32-D331 (3 mm sensing distance, 0.5 mm dia. head, probe tip) 86 IAmsg1-44.indd 6 1/5/07 12:59:17 PM Background Suppression Applications Fiber optic cables with convergent beam head configurations solve the problem of background reflections in spacerestricted areas. These special cables can also be used for precise positioning of objects or machinery. Left- and right-side emitter models eliminate interference when using two or more E32-L56 sensing heads. Long Range Detection of Small Objects Fluid Level Detection Convergent Beam E32-L24L (42 mm range, side view head, to 105C) E32-L24S (0-4 mm range, side view head) E32-L25 (3.3 mm range, side view head) E32-L25L (7.21.8 mm range) E32-L25A (3.3 mm range) E32-L56Eo (4-12 mm range) E32-L66 (5-18 mm range, sensing head to 300C) Available Models Through-Beam E32-T11L (1330 mm sensing distance, M4 threaded head) E32-T12L (1330 mm sensing distance, 3 mm dia. head) E32-T14L (460 mm sensing distance, 3 mm dia., side view head) E32-T17L (20,000 mm sensing distance, M14 threaded head) E32-T21L (440 mm sensing distance, M3 threaded head) E32-T22L (440 mm sensing distance, 2 mm dia. head) Diffuse E32-D11L (400 mm sensing distance, M6 threaded head) E32-D12 (230 mm sensing distance, 3 mm dia. head) E32-D16 (40 to 700 mm sensing distance, 17.5 mm square head) E32-D21L (130 mm sensing distance, M4 threaded head) E32-D22L (130 mm sensing distance, 3 mm dia. head) PHOTOELECTRIC SENSORS A wide variety of fiber optic cables with special sensing heads and lenses are available for detecting small objects over longer distances in space-confined areas. They are available in through-beam or diffuse versions with threaded and non-threaded heads for more versatile mounting. Available Models Available Models Omron offers two fiber optic sensing solutions for fluid level detection in space-confined areas: immersion style sensing heads can be submerged in the fluid to be monitored, and a tube-mounted sensing heads that can sense fluids through a clear tube. E32-D82F1 (Immersion type, 150 mm length) E32-D82F2 (Immersion type, 350 mm length) E32-A01 (External mount; 3.2, 6.4, 9.5 mm clear tube) E32-A02 (External mount; 6 to 13 mm clear tube) E32-L25T (External mount, 8 to 10 mm clear tube) E32-D36F (External mount; clear tube, no diameter restriction) Also consider EE-SPX613 Amplified Photomicrosensor 7 9 IAmsg1-44.indd 7 1/5/07 12:59:44 PM Transparent Object Detection Available Models Sensing transparent objects is always a challenge. Omron solves this problem with fiber optic cables that are polarized and reflectors specially designed for sensing small transparent objects in tight spaces. They are ideal for sensing lenses, clear plastics, and transparent packaging materials. E32-R21 (Retroreflective, 10-250 mm range) E32-R16 (Retroreflective, 150-1,500 mm range) Extreme Bending Applications PHOTOELECTRIC SENSORS For machine applications that require extreme bending of fiber optic cables to conform to tight spaces, Omron offers a variety of cables that feature a unique multi-core construction. Unlike singlecore cables that can lose their light transmission capability when bent tightly, the multi-core design ensures optimal light transmission even when bent 180 with a bending radius of 1 mm. General-Purpose Industrial Applications Available Models Through Beam E32-T11R (530 mm sensing distance, M4 threaded head) E32-T12R (530 mm sensing distance, 3 mm dia. head) E32-T14LR (210 mm sensing distance, 3 mm dia. head) E32-T21R (130 mm sensing distance, M3 threaded head) E32-T16WR (1300 mm sensing distance, 30 mm wide beam) E32-T16JR (750 mm sensing distance, 11 mm wide beam, side view) E32-T16PR (840 mm sensing distance, 11 mm wide beam) E32-T22R (130 mm sensing distance, 2 mm dia. head) E32-T24R (50 mm sensing distance, 1 mm dia. head, side view) Diffuse E32-D11R (170 mm sensing distance, M6 threaded head) E32-D12R (170 mm sensing distance, 3 mm dia. head) E32-D14LR (45 mm sensing distance, 6 mm dia. head, side view) E32-D21R (30 mm sensing distance, M3 threaded head) E32-D22R (30 mm sensing distance, 3 mm dia. head) E32-D24R (15 mm sensing distance, 2 mm dia. head, side view) Available Models For most sensing applications, the spacesaving combination of a fiber-optic amplifier and general-purpose fiber unit provides an economical solution. Through-Beam E32-TC200 (760 mm sensing distance, M4 threaded head) E32-TC200A (680 mm sensing distance, M3 threaded head) Diffuse E32-DC200 (300 mm sensing distance, M6 threaded head) 108 IAmsg1-44.indd 8 1/5/07 1:00:25 PM Photoelectric Sensors E3XA analog fiber-optic amplifier Dimensions mm (in) 40 H x 20.4 W x 30 D (1.57 x 0.80 x 1.18) E3S-CL E3JK E3JM 50 H x 17.6 W x 50 D (1.97 x 0.69 x 1.97) 65 H x 25 W x 75 D (2.56 x 0.98 x 2.95) Built-in amplifier Built-in AC/DC amplifier Built-in AC/DC amplifier * Background suppression * Stable detection regardless of material color or size of object * Sensing unaffected by dirty lens * IP67 water resistant housing * Complimentary relay output 1NO & 1NC or NPN/PNP * Slim housing ideal for narrow installation spaces * Universal AC/DC supply voltage * Relay or transistor output available * Built-in timers available * Easy to wire terminal block * Universal AC/DC supply voltage Through-beam sensing Varies depending on the model distance and fiber chosen - 5 m (16.4 ft) 10 m (32.8 ft) Retroreflective sensing Varies depending on the model distance and fiber chosen - 0 to 3 m (9.8 ft) 0 to 5 m (16.4 ft) Polarized 0 to 4 m (13.1 ft) E3S-CL1: 5 to 200 mm E3S-CL2: 5 to 500 mm 0 to 300 mm (11.8 in) 0 to 700 mm (2.3 ft) - - - 10 to 30 VDC 24 to 240 VAC 50/60 Hz. and 12 to 240 VDC 24 to 240 VAC 50/60 Hz. and 12 to 240 VDC - Relay 3 A, 250 VAC Relay 3 A, 250 VAC Amplifier type Fiber-optic amplifier Features * Ideal for detecting size, color and surface characteristics * Four turn controls allow fine adjustment of sensitivity and operating point Diffuse reflective sensing Varies depending on the model distance and fiber chosen Color sensing Yes Supply voltage 12 to 24 VDC AC control output 4 to 20 mA DC control output type NPN Max. load Analog: 20 to 21.55 mA Digital: 100 mA max. Alarm - Response time 2 ms max. ON/OFF Materials: Lens Case Bracket Cover Plastic Plastic - - Enclosure rating IP66 Light source Red LED Circuit protection Short-circuit, reverse polarity Mutual interference - protection Operation mode Light-ON / Dark-ON switch selectable Applications Food and Bev, material handling, semiconductor, electronics packaging applications NPN or PNP (switch selectable) NPN/PNP wire selectable NPN or PNP separate models 100 mA max. 100 mA at 300 VDC 100 mA at 48 VDC - - - 2 ms max ON/OFF 30 ms relay output; 3 ms for transistor output 30 ms relay output; 5 ms for transistor output Acrylic Zinc die cast Operating Panel: Sulfonated polyether Stainless Steel Plastic PMMA Plastic ABS - Plastic PMMA Plastic PMMA Plastic ABS - Plastic PMMA IP67 NEMA 1, 2, 12, IP64 IP66 E3S-CL1: Red LED; E3S-CL2: IR LED Pulse modulated infrared LED; Pulse modulated red LED Infrared LED; Polarized red LED on retro Short-circuit, reverse polarity Reverse polarity on DC power supply only Load short circuit on transistor output models only Yes - - Light-ON / Dark-ON switch selectable Light-ON / Dark-ON separate models Light-ON / Dark-ON switch selectable Food and Bev, material handling, packaging applications, rugged applications Relay or transistor output; Detect shiny objects; Universal supply AC/DC UL CSA; Easy to wire terminal block; Relay or transistor output models available; Builtin timers available; Universal supply AC/DC PHOTOELECTRIC SENSORS 42.6 H x 15.5 W x 40 D (1.7 x 0.61 x 1.57) 9 11 IAmsg1-44.indd 9 1/5/07 1:00:38 PM Photoelectric Sensors E3L Dimensions mm (in) 55 H x 17 W x 50 D (2.17 x 0.67 x 1.97) Amplifier type Built-in DC amplifier PHOTOELECTRIC SENSORS Features * Laser beam provides long distance spot sensing * Class 1 versions require no additional protection * Stability indicator signals upon deteriorating conditions E3HT E3X-NT/NM E3X-NL 8.5 dia. x 41.5 L (0.33 x 1.63) Single Channel: 32.5 H x 10 W x 59 D (1.28 x 0.39 x 2.32) Four Channel: 32.5 H x 32.2 W x 59 D (1.28 x 1.27 x 2.32) Amplifier: 33 H x 32.2 W x 59 D (1.29 x 1.27 x 2.32) Sensing Head (short): 29 H x 10.4 W x 29 D (1.14 x 0.41 x 1.14) (long): 42 H x 20.4 W x 47 D (1.65 x 0.80 x 1.85) Built-in DC amplifier Fiber-optic amplifier Fiber-optic amplifier * Ideal for space-confined * Remote teach function installation 8 mm housing * Four fiber-optic cables can be * Cost effective mounted directly next to each * Nickel plate brass construction other without mutual * CE certified interference * Connector models available * Ideal for sensing glossy objects * Easy-to-use TEACH function * Remote TEACH function * Mutual interference protection Through-beam sensing 10 m (32.8 ft) distance 2 m (6.56 ft) To 1 m (3.28 ft) Varies depending on the model and fiber chosen - Retroreflective sensing - distance - Varies depending on the model and fiber chosen - To 35 mm (1.38 in) Varies depending on the model and fiber chosen Short range: 10 3 mm Long range: 20 7 mm - - - 12 to 24 VDC 12 to 24 VDC 12 to 24 VDC - - - NPN, PNP NPN Relay (sink) 80 mA max. 100 mA max. at 30 VDC 100 mA max. at 40 VDC (E3X-VG) 100 mA - - - 10 ms ON/OFF through-beams; 6 ms ON/OFF diffuse models 500 s 1 ms max. Plastic Nickel-plated brass - - - PBT plastic - Polycarbonate - PBT plastic - Polycarbonate NEMA 1, 3, 4X, 6, 12 IP66 IP50 IP50 Pulse modulated infrared LED Pulse modulated red LED Red LED Reverse polarity and load short circuit Short circuit and reverse polarity - - Provided Yes Light-ON / Dark-ON separate models Light-ON / Dark-ON switch selectable Light-ON / Dark-ON switch selectable Diffuse reflective sensing 200 to 500 mm distance (7.90 to 19.7 in) Color sensing - Supply voltage 12 to 24 VDC AC control output - DC control output type NPN open collector or NPN & TTL logic NPN constant current source or PNP open collector Max. load NPN 100 mA; NPN type: Load (relay, sink) logic: 80 mA Voltage (source) logic: 3 mA PNP type: Load (relay, source) logic: 80 mA Alarm NPN or PNP 50 mA at 24 VDC. Response time 1 ms ON/OFF or 3 ms ON/OFF Materials: Lens Case Bracket Cover Plastic (PMMA) Zinc die cast - - Enclosure rating NEMA 4, IP67 Light source Infrared pulse modulated laser diode (780 nm) or visible red pulse modulated laser diode (670 nm) Circuit protection Load short circuit and reverse polarity Mutual interference Standard level protection Operation mode Light-ON / Dark-ON wire selectable Applications Laser Photoelectric Prewired Sensor; Provides long distance detection of objects down to 0.1 mm dia. CE certified; 8 mm cylindrical General purpose, background housing fits in compact spaces; suppression Connector types available; Dual output NPN & TTL Luster detection, tight space application 10 12 IAmsg1-44.indd 10 1/5/07 1:00:44 PM Photoelectric Sensors E3S-C E3S-CR Dimensions mm (in) Horizontal: 23 H x 20.4 W x 57.5 D Horizontal: (0.91 x 0.80 x 2.24) 57 H x 20.4 W x 23 D Vertical: 57.5 H x 20.4 W x 23 D (2.24 x 0.80 x 0.91) (2.24 x 0.80 x 0.91) E3MC E3M-V 68.5 H x 21 W x 47.7 D (2.70 x 0.83 x 1.46) Built-in DC amplifier Self-contained Self-contained * Clear material detection specially tuned for glass and plastic bottles * Compensates for "lens effects" * IP67 rating, versatile NPN/PNP, L.O., D.O., in one unit * Rugged die cast metal housing * RGB color sensor detects subtle color differences * Remote TEACH function * Four-color storage capability * Lensed and fiber-optic versions * Color mark sensor * Remote control setup * Green LED detects yellow on white * Stable operation on shiny surfaces Through-beam sensing 30 m (98.43 ft) distance - Varies depending on the model and fiber chosen - Retroreflective sensing Polarized: 3 m (9.84 ft) distance 250 mm (9.84 in) or 1 m (3.28 ft) - - - Varies depending on the model and fiber chosen 10 mm 3 mm - Yes Yes 10 to 30 VDC 24 to 240 VDC 10 to 30 VDC, 10% Ripple max. - - - NPN/PNP switch selectable NPN, PNP NPN/PNP 100 mA at 30 VDC 100 mA 100 mA - - - 2 ms ON/OFF 1 output: standard - 3 ms high-speed - 1 ms 4 output: standard - 6 ms high-speed - 2 ms 50 s Acrylic Zinc die cast Stainless steel Panel: Sulfonated polyether - Zinc-diecast Fiber Head: -X/MX: ABS PES Acrylic PBT - - NEMA 6P, IP67 IP66 w/ protective cover in place IP67 Red LED (670 nm) Red, green, and blue LED Green LED Reverse polarity and load short circuit Reverse polarity, short-circuit Short circuit, reverse polarity Provided - - Light-ON / Dark-ON switch selectable Light-ON / Dark-ON switch selectable Light-ON / Dark-ON, switch selectable Clear material sensor; Rugged; Detects clear bottles reliably even with "lens effects"; Connector versions available Color differentiation, Food and Bev, material handling, packaging applications High-speed mark detection Amplifier type Built-in DC amplifier Features * Rugged metal body * 6 times normal sensing distance * NEMA 4X, 6P, IP67 * Vertical and horizontal body styles * Fuzzy logic mutual interference protection * CE conformance Diffuse reflective sensing 700 mm (27.56 in) and distance 2 m (6.56 ft) Color sensing - Supply voltage 10 to 30 VDC AC control output - DC control output type NPN or PNP selectable Max. load 100 mA max. at 30 VDC Alarm - Response time 1 ms ON/OFF (2 ms ON/OFF for short range diffuse models) Materials: Lens Case Bracket Cover Acrylic Zinc die cast Stainless steel Op. panel: Sulfonated Polyether Enclosure rating NEMA 1,4X, 6P, 12, 13, IP67 Light source Pulse mod. infrared (880 nm) Red LED (700 nm) on retro Circuit protection Load short circuit and reverse polarity Mutual interference On all except through-beam protection models Operation mode Light-ON / Dark-ON switch selectable Applications Washdown environments; Long range sensing 30 m; NPN /PNP selectable; CE conformance requirements; Highly shock resistant 100 g; Metal body PHOTOELECTRIC SENSORS 53.2 H x 30.4 W x 98 D (2.09 x 1.19 x 3.85) 11 13 IAmsg1-44.indd 11 1/5/07 1:00:49 PM Photoelectric Sensors E3S-LS3N Dimensions mm (in) 19.0 H x 10.0 W x 34.0 D (0.79 x 0.39 x 1.33) E3HF F3C-AA41 E3C-VS1G/ E3C-VS3R: 15 H x 10 W x 28 D (0.59 x 0.39 x 1.10) E3C-VM35R/ E3C-VS7R: 20 H x 10 W x 47 D (0.78 x 0.39 x 1.85) 28 H x 50 W x 7 D (1.10 x 1.97 x 0.28) 90 H x 18 W x 45 D (3.54 x 0.70 x 1.77) Pinpoint/mark sensing head (Use separate amplifier) Built-in DC amplifier Roller conveyor sensor * Accurately detects color marks against many different backgrounds * Pinpoint beam enables it to detect small objects, marks and wires as small as 0.2 mm * Thin profile 7 mm thick flat pack style sensor * Can detect 0.5 mm (0.02 in) objects with included slits * Light-ON or Dark-ON versions * Top and side through holes for easy mounting * Detects objects from underneath roller conveyor * M12 connector * Unique optical system for setting distance, eliminates background influences Through-beam sensing - distance - 1 m (3.28 ft) - Retroreflective sensing - distance - - - E3C-VS1G: 10 2 mm E3C-VS3R: 30 5 mm E3C-VM35R: 35 5 mm (mark) 20 to 80 mm (spot) E3C-VS7R: 70 10 mm (mark) 40 to 110 mm (spot) 50 mm (1.97 in) 0 to 750 mm Yes - - See E3C amplifiers 12 to 24 VDC 10 to 30 VDC See E3C amplifiers - - Amplifier type Printed circuit board sensor Features * Stable detection without being affected by holes or notches * Will detect any color PC board PHOTOELECTRIC SENSORS E3C-V Diffuse reflective sensing 10 - 60 mm distance Color sensing Yes Supply voltage 12 to 24 VDC 10% Ripple max. AC control output - DC control output type NPN See E3C amplifiers NPN with pull-up resistor NPN or PNP Max. load 50 mA See E3C amplifiers NPN 80 mA relay sink logic NPN 3 mA voltage source logic 150 mA Alarm - See E3C amplifiers - - See E3C amplifiers 6 ms ON/OFF or 10 ms ON/OFF on some models 10 ms max. E3C-VS1G/VS3R: Plastic, polycarb.; Plastic Acrylic E3C-VM35R/VS7R: Glass Plastic - - Plastic - - ABS - - E3C-VS1G/VS3R: IP64 E3C-VM35R/VS7R: IP50 NEMA 1, 3, 4X, 12 IP64 IP40 E3C-VS1G: Pulse modulated Green LED E3C-VS3R/VM35R/VS7R: Pulse modulated Red LED Pulse modulated infrared LED Infrared LED Circuit protection - See E3C amplifiers Reverse polarity and load short circuit Load short circuit and reverse polarity Mutual interference - protection See E3C amplifiers - Yes See E3C amplifiers Light-ON / Dark-ON separate versions Light-ON / Dark-ON selectable Color mark applications, inspection and accurate positioning Thin profile 7 mm photoelectric sensor; Ideal for space constrained applications; Good for small object detection Packaging, roller conveyor object detection, material handling Response time 1 ms Materials: Lens Acrylic Case ABS Bracket - Cover - Enclosure rating IP40 Light source Red LED Operation mode Light-ON Applications PC board detection 12 14 IAmsg1-44.indd 12 1/5/07 1:00:58 PM Photoelectric Sensors F3C-AL Dimensions mm (in) 90 H x 18 W x 45 D (3.54 x 0.70 x 1.77) E3C-LDA E3C-oooo Sensor Heads and Amplifiers Sensor Heads: -S10: 14 H x 5.8 W x 10 D (0.55 x 0.22 x 0.39) -S20W: 12.5 H x 2.8 W x 20 D (0.49 x 0.11 x 0.78) -S30T: 15 H x 3 W x 7.85 D (0.59 x 0.11 x 0.31) -S30W: 8.4 H x 3 W x 15 D (0.33 x 0.11 x 0.59) -S50: 13 H x 7 W x 11 D (0.51 x 0.28 x 0.43) -1: 12 H x 8 W x 25 D (0.47 x 0.31 x 0.98) -2: 16 H x 12.4 W x 36 D (0.63 x 0.49 x 1.42) -DS5W: 19.5 H x 2.8 W x 18 D (0.77 x 0.11 x 0.71) -DS10: 15 H x 10 W x 28 D (0.59 x 0.39 x 1.10) Amplifiers: -A/C: 82.5 H x 49 W x 48 D (3.24 x 1.93 x 1.89) -JB4P/JC4P: 32.5 H x 14 W x 60 D (1.28 x 0.55 x 2.36) -GE4/GF4: 35.5 H x 20.7 W x 27.2 D (1.39 x 0.81 x 1.07) -WH4F: 75 H x 22.5 W x 80 D (2.95 x 0.88 x 3.15) Separate amplifier Separate amplifier * Laser heads * Three beam types: spot, line and area * Beam focusable and adjustable optical alignment * Same programming as E3X-DA Sensor Heads: * Miniature interchangeable sensing heads * Remote sensitivity adjustment Amplifiers: * Multiple sizes * Track mountable models, slim * 1/16 DIN size socket mount amplifier Through-beam sensing - distance - -S10: 100 mm (3.94 in); -S20W: 200 mm (7.87 in); -S30W: 300 mm (11.81 in); -S3OT: 300 mm (11.81 in); -S50: 500 mm (19.7 in); -1: 1 m (3.28 ft); -2: 2 m (6.56 ft) Retroreflective sensing - distance 2 to 7 m - 30 to 1000 mm -DS5W: 50 mm (1.97 in); -DS10: 100 mm (3.94 in) - - 12 to 24 VDC 12 to 24 VDC; -A/C: 100 to 240 VAC - -A/C: SPDT relay NPN or PNP -JB4P/GF4: PNP; -JC4P/GE4: NPN; -WH4F: NPN and PNP 50 mA max. -JB4P/JC4P/GF4: 100 mA at 24 VDC -WH4F: 100 mA at 40 VDC; -GE4: 80 mA at 24 VDC - -JB4P/JC4P: 50 mA at 24 VDC Standard mode: 1 ms High-speed mode: 100 s High-resolution mode: 4 ms -JB4P/JC4P: 2 ms or 41 ms max ON/OFF (Switch selectable) -GE4/GF4/WH4F: 2 ms or 4 ms max ON/OFF (Switch selectable) - PBT - Polycarbonate Sensor Heads: Lens: Plastic, polycarbonate; Case: Plastic, polycarbonate; -2: Zinc die cast; Cable Sheath: Plastic, polyethylene - Amplifiers: Plastic case IP50 Sensor Heads: -S10/S50/DS10: NEMA 1, 2, 12, IP64 -S20W/DS5W: NEMA 1, IP50; -S30: NEMA 1, IP60 -1/2: NEMA 1,2, 4, 4X, 12, IP66 Amplifiers: NEMA 1, IP20; -JB4P: NEMA 1, 2, IP50 Laser, Class 2, Red diode 650 nm Pulse modulated IR LED Short circuit and reverse polarity Short circuit, and reverse polarity -A/C: Not available Yes - Light-ON / Dark-ON selectable Light-ON / Dark-ON; switch or jumper selectable All purpose, high-speed, mark sensing, transparency detection, color discrimination, minute object, high-precision positioning Space constraint applications Amplifier type Distance setting laser photoelectric sensor Features * Laser diode * M12 connector * Spot diameter 1.5 x 4 mm at 700 mm Diffuse reflective sensing 120 to 700 mm distance Color sensing - Supply voltage 10 to 30 VDC AC control output - DC control output type NPN or PNP Max. load 150 mA Alarm - Response time 10 ms max. Materials: Lens Case Bracket Cover Acrylic ABS - - Enclosure rating IP40 Light source Laser, Class 2, Red 670 nm Circuit protection Load short circuit and reverse polarity Mutual interference Yes protection Operation mode Light-ON / Dark-ON selectable Applications General purpose, minute object detection, material handling, packaging IAmsg1-44.indd 13 NOTE: Consult Omron for other models PHOTOELECTRIC SENSORS Amplifier: 32 H x 10 W x 82.7 D (1.25 x 0.393 x 3.25) Sensing Head: 25 H x 12.8 W x 33 D (0.98 x 0.50 x 1.29) 13 15 1/5/07 1:01:06 PM Amplified Photomicrosensors Omron Smart Solutions Slotted sensors provide end-of-travel and home position signals for positioning tables and assembly robots. Choose connector-ready or pre-wired models with pulse-modulated or non-pulsemodulated light source in a wide range of mounting shapes. Use diffuse sensors with pulse modulated light source to detect passing target objects; connector ready for easy installation. Liquid level sensor easily mounts to clear clear sight glass; equipped with sensitivity selector to allow for pipe discoloration over time. 14 IAmsg1-44.indd 14 1/18/07 11:01:18 AM Photomicrosensors Amplified Sub-category Amplified Amplified Amplified Slotted, non-pulse modulated, pre-wired Slotted, pulse modulated, connector ready Slotted, pulse modulated, pre-wired Model numbers EE-SX470, EE-SX471, EE-SX472, EE-SX473, EE-SX474, EE-SX670, EE-SX671, EE-SX672, EE-SX673, EE-SX674, EE-SX670A, EE-SX671A, EE-SX672A, EE-SX673A, EE-SX674A, EE-SX470P, EE-SX471P, EE-SX472P, EE-SX473P, EE-SX474P, EE-SX670P, EE-SX671P, EE-SX672P, EE-SX673P, EE-SX674P EE-SX770, EE-SX771, EE-SX772, EE-SX870, EE-SX871, EE-SX872, EE-SX770A, EE-SX771A, EE-SX772A, EE-SX870A, EE-SX871A, EE-SX872A, EE-SX770P, EE-SX771P, EE-SX772P, EE-SX870P, EE-SX871P, EE-SX872P, EE-SX770R, EE-SX771R, EE-SX772R, EE-SX870R, EE-SX871R, EE-SX872R EE-SPX301, EE-SPX303, EE-SPX401, EE-SPX403, EE-SPX303-1, EE-SPX740, EE-SPX840, EE-SPX741, EE-SPX841, EE-SPX742, EE-SPX842, EE-SPX743, EE-SPX843 EE-SPX302-W2A, EE-SPX304-W2A, EE-SPX305-W2A, EE-SPX306-W2A, EE-SPX402-W2A, EE-SPX404-W2A, EE-SPX405-W2A, EE-SPX406-W2A Connection type Connector or soldering terminals Pre-wired cable Available connectors:** Solder connector EE-1001, Connector with 2 m cable EE-1006/EE-1006A bracket Connector or soldering terminals Pre-wired cable Available connectors:** Solder connector EE-1001, Connector with 2 m cable EE-1006/EE-1006A bracket Connector with 1 m cable for 740/840 series EE-1013 * Standard, L-shaped, T-shaped and close mounting models * Built-in indicator * Standard, L-shaped, and T-shaped models * UL, EMC and CE approvals * Compact size * Built-in indicator and optical axis guide * Easily connects to TTLs, relays and PLCs * Range of slot widths * Built-in indicator * Light modulation reduces external light interference * Output of SPX301 / SPX401 / SPX303 / SPX403 can be converted to PNP * Compact sensing heads * Built-in indicator * Light modulation reduces external light interference 5 (0.20) 5 (0.20) 3.6 (0.14) 5 (0.20) 13 (0.51) 3.6 (0.14) 5 (0.20) Light-ON/Dark-ON* Light-ON or Dark-ON models Light-ON or Dark-ON models Light-ON or Dark-ON models 5 to 24 VDC 5 to 24 VDC 5 to 24 VDC 5 to 24 VDC NPN or PNP models NPN or PNP models NPN NPN 100 mA (NPN); 50 mA (PNP) 100 mA (NPN); 50 mA (PNP) 80 mA; 50 mA (SPX74/SPX84) 80 mA 1 kHz (3 kHz typical) 1 kHz 500 Hz 500 Hz IP50 IP60 IP50 IP50 except terminals -25 to 55C -25 to 55C -10 to 55C -10 to 55C 5% to 85% RH 5% to 85% RH 35% to 85% RH; 5% to 85% RH (SPX74/SPX84) 35% to 85% RH Features Slot width/sensing distance mm (in) Output logic Supply voltage Output type Max. load current output Response frequency Enclosure ratings Ambient operating temperature Ambient operating humidity AMPLIFIED PHOTOMICROSENSORS Slotted, non-pulse modulated, connector ready *The EE-SX67o Series can be used as Light-ON when the L terminal and positive (+) are connected. For Dark-ON, do not connect the L terminal. 15 17 IAmsg1-44.indd 15 1/5/07 1:01:29 PM Photomicrosensors Amplified Sub-category Amplified Amplified Diffuse, non-pulse modulated, connector ready Diffuse, pulse modulated, connector ready Convergent reflective, pulse modulated, connector ready Diffuse retro-reflective, pulse modulated, connector ready Model numbers EE-SY671, EE-SY672, EE-SB5M, EE-SB5MC, EE-SB5V, EE-SB5VC, EE-SB5V-E EE-SPY301, EE-SPY302, EE-SPY401, EE-SPY402 EE-SPY311, EE-SPY312, EE-SPY411, EE-SPY412 EE-SPZ301-A, EE-SPZ401-A Connection type Connector or soldering terminals Solder connector: EE-1001 Connector with 2 m cable: EE-1006/EE-1006A bracket Connector or soldering terminals Solder connector: EE-1002 Connector with 1 m cable: EE-1003 Connector or soldering terminals Solder connector: EE-1001 Connector with 2 m cable: EE-1006/EE-1006A bracket PNP output conversion connector EE-2002 Connector or soldering terminals Solder connector: EE-1002 Connector with 1 m cable: EE-1003 * Built-in sensitivity adjuster * Selectable Light-ON or Dark-ON operation * Output can be converted to PNP * Easy connection to TTLs, relays and PLCs * Light-ON indicator simplifies adjustment and optical axis monitoring * Output can be converted to PNP * Detects objects placed at least * Long sensing distance 20 mm in front of shiny * Easy sensitivity adjustment and optical axis monitoring backgrounds with built-in indicator * Detects objects as thin as * Use with optional reflector or 0.05 mm-dia. copper wire highly reflective target * Detects dark-color objects * Output can be converted to PNP 1 to 5 (0.04 to 0.20) 5 (0.20) 19 (0.75) 5 (0.20) 2 to 6 (0.08 to 0.24) 5 (0.20) 200 (7.87) with E39-R1 reflector Light-ON or Dark-ON* Light-ON or Dark-ON Light-ON or Dark-ON models Light-ON or Dark-ON models 5 to 24 VDC (EE-SY) 5 to 12 VDC (EE-SB) 5 to 24 VDC 5 to 24 VDC 5 to 24 VDC NPN NPN NPN NPN 100 mA (EE-SY) 80 mA (EE-SB) 80 mA 80 mA 80 mA 50 Hz 100 Hz 100 Hz 100 Hz IP50 IP50 IP50 except terminals IP50 except terminals -10 to 55C (EE-SY) -25 to 55C (EE-SB) -10 to 55C -10 to 55C -10 to 55C 45% to 85% RH 35% to 85% RH 35% to 85% RH 35% to 85% RH Features AMPLIFIED PHOTOMICROSENSORS Amplified Slot width/sensing distance mm (in) Output logic Supply voltage Output type Max. load current output Response frequency Enclosure ratings Ambient operating temperature Ambient operating humidity *EE-SY671 and EE-SY672 models can be used as LightON when the L terminal and positive (+) is connected. For Dark-ON, do not connect the L terminal. 16 18 IAmsg1-44.indd 16 1/5/07 1:01:38 PM Photomicrosensors Amplified Sub-category Amplified Amplified Amplified Amplified Through-beam, pulse modulated Reflective displacement sensor, non-pulse modulated Inductive unshielded proximity sensor, connector ready Liquid level sensor, pulse modulated, prewired Fiber-optic, pulse modulated, connector ready Model numbers EE-SPW311, EE-SPW321, EE-SPW321-A, EE-SPW411 EE-SPW421, EE-SPW421-A Z4D-F04A, Z4D-F04D E2R-A01 EE-SPX613 *EE-SPZ301, *EE-SPZ401, EE-SPZ301Y-01 EE-SPZ401Y-01, EE-SPZ301W-02 EE-SPZ401W-02, EE-SPZ301W-01 EE-SPZ401W-01 Connection type Connector with Connector with 2 m cable for 1 m cable: EE-1010D EE-SPW311/411 Emitter: EE-1006L Receiver: EE-1006D EE-SPW321/421 Pre-wired with 2 m cable Connector with 1 m cable: E22-01 Pre-wired, 1 m cable Solder terminal or connector: Solder terminal EE-1002 Connector with 1 m wire EE-1003 Features Output logic Supply voltage Output type Max. load current output Response frequency Enclosure ratings Ambient operating temperature Ambient operating humidity * Compact, micro* Non-contact displacement sensor unshielded inductive provides resolution to proximity sensor 5 mm detects metal targets * Analog or digital output regardless of color or models surface texture * Ideal for double- sheet * Low profile spacedetection, material saving shape remaining on a web or roll EE-SPW311/411 1 m (3.28 ft) EE-SPW321/421 30 cm (11.81 in) 41.25 (0.160.05) 5 (0.20) 6 to 13 (0.24 to 0.52) OD tubing with minimum 1 (0.04) thick walls EE-SPZ301/401: 20 (0.79) with E32-TC200 cable 1 to 6 (0.04 to 0.24) with E32-DC200 cable EE-SPZo01W-01: 30 (1.18) EE-SPZo01W-02: 5 (0.20) EE-SPZo01Y-01: 1 to 3 (0.04 to 0.12) Light-ON or Dark-ON models Light-ON Normally open Light-ON or Dark-ON, selectable Light-ON or Dark-ON models 5 to 24 VDC 12 to 24 VDC 12 to 24 VDC 5 to 24 VDC 12 to 24 VDC 5 to 24 VDC NPN 1 to 5 V analog or NPN discrete NPN NPN NPN 100 mA 50 mA (NPN) 100 mA 100 mA 80 mA 1 ms max. 5 ms max. analog 1.5 ms max. NPN 5 kHz - 100 Hz IP60 (311/411) IP64 (321/421) IP50 IP50 IP50 IP50 -10 to 55C (311/411) -20 to 55C (321/421) -10 to 55C -10 to 55C -10 to 55C -10 to 55C 35% to 85% RH 5% to 85% RH 35% to 85% RH Includes cable ties and rubber anti-slip bands. *Order E32-Series fiberoptic cables separately. 45% to 85% RH (311/411) 35% to 85% RH 35% to 85%RH (321/421) E39-L69 mounting bracket is optional. * Detects clear liquid * Sensing heads fit presence by refraction space-confined * Easy to install: straps installations to clear or translucent * Visible indicator tubing simplifies optical axis * Set sensitivity to match adjustment and older pipe tinted by monitoring contents AMPLIFIED PHOTOMICROSENSORS Slot width/sensing distance mm (in) * Provides long sensing distance in compact size * EE-SPW321/421 feature a cable amplifier with 0.5 or 1 m cable between amp and sensing heads 17 19 IAmsg1-44.indd 17 1/5/07 1:01:42 PM Proximity Sensors Omron Smart Solutions Cost-effective extended range proximity sensor features one-piece, threaded barrel construction with wrench flats. Choose connector or pre-wired versions; wide range of sizes and lengths. Inductive proximity sensors feature rugged thick barrel. Choose from standard sizes; DC 2-wire, DC-3-wire and AC 2-wire models; shielded and unshielded versions, pre-wired and connector-ready. America's best-selling capacitive sensor detects objects regardless of material or color. Can be tuned to ignore a container wall. Weld field immune inductive proximity sensors that can withstand current at only 1 inch away from the 20,000amp welding electrode. Available in cylindrical and square form factors. 18 IAmsg1-44.indd 18 1/5/07 1:01:57 PM Inductive Proximity Sensors Threaded Cylindrical E2E Product type Short Barrel Cylindrical E2E2 E2A Extended Range OEM Proximity Sensor M12 x 55 (0.47 x 2.17); M18 x 60 (0.71 x 2.36); M30 x 65 (1.18 x 2.56) M8 Long and short barrel M12 Long and short barrel M18 Long and short barrel M30 Long and short barrel * Vacuum potted internal circuitry * Multiple connector versions * Same solid construction and high quality as E2E with long barrel bodies * Fully threaded body * Pre-wired 2 m or 5 m cables * Multiple pigtail versions * Highly visible LED indication * Extended sensing distances * Economical large quantity OEM pricing * Vacuum potted internal circuitry * One-piece housing * Stainless steel M8 barrel versions * Wrench flats for easy installation * Superior barrel thickness and highest tightening torques available * Easily customized * Pre-wired or connector versions 2, 3, 5, 7, and 10 mm 2, 4, 8, and 15 mm 5, 8, 10, 14, 18, and 20 mm 4, 8, 16, 20, and 30 mm DC supply voltage 12 to 24 VDC (10-30 VDC operating) 12 to 24 VDC (10-55 VDC operating) 12 to 24 VDC (10-32 VDC operating) AC supply voltage 24 to 240 VAC or 90 to 140 VAC 50/60 Hz Features * Omron's flagship highest quality proximity sensor family * Vacuum potted internal circuitry * Multiple connector versions * Wrench flats for easy installation * Superior barrel thickness and highest tightening torques available * Pre-wired 2 m or 5 m cables * Multiple pigtail versions * Highly visible LED Shielded sensing distances 0.8, 1, 1.5, 2, 3, 5, 7, and 10 mm Unshielded sensing distances 2, 4, 5, 8, 10, 14, 18, and 20 mm 24 to 240 VAC 50/60 Hz N/A 2-wire DC output NO, NC; 100 mA max. NO, NC; 100 mA max. N/A 3-wire DC output NPN-NO, NPN-NC, PNP-NO, PNP-NC; 100 or 200 mA max. NPN-NO, NPN-NC Open Collector PNP-NO, PNP-NC Open Collector 200 mA max. NPN-NO, NPN-NC Open Collector PNP-NO, PNP-NC Open Collector 200 mA max AC 2-wire output NO, NC; 300 mA max. NO, NC; 200 or 300 mA max. N/A 25 Hz to 1.5 kHz 100 Hz to 1.5 kHz PVC Cable 2 m or 5 m; M12 Micro Change(R) connector PVC Cable 2 m or 5 m; M12 Micro Change(R) connectors 4 Pin; M8 Nano Change(R) connectors 3 Pin; M8 only stainless steel or NPB barrel Nickel plated brass barrel; Sensing face is PBT; IEC: IP67/ 1200 PSI Washdown; NEMA: 1, 4, 6, 12, 13 Nickel plated brass barrel; Sensing face is PBT; IEC IP67 Agency approvals UL, CSA, CE UL, CSA, CE UL, CSA, CE Circuit protection Output short circuit, surge absorber, reverse polarity specific model dependent Output short circuit, surge absorber, reverse polarity specific model dependent Output short circuit, surge absorber, power source reverse polarity, and output reverse polarity Alternate frequency versions; Custom cable lengths and connectors Yellow LED 4 x 90 on connector types; Highly visible yellow LED on pre-wired types; World standard prox Use when high quality, high reliability is needed in a long barrel body; Standard distance inductive prox for ferrous metal sensing; 1200-PSI Washdown Rated; DC2W, DC3W, AC2W Use when extended range general purpose sensing is required; Extended distance inductive prox for ferrous metal sensing; Large quantity OEM pricing available Easily customized; DC3W Response frequency 25 Hz to 3 kHz Connections PVC Cables / Robotic Cables; Multiple M12 Micro Change(R) or M8 Nano Change(R) connectors; Multiple pigtail connectors Enclosure Nickel plated brass barrel; Stainless steel barrel on M8 and smaller models; Sensing face is PBT; IEC IP67 / 1200 PSI Washdown; NEMA 1, 3, 4, 6, 12, 13 Other Self diagnostic versions; AC/DC versions; Alternate frequency versions; Custom cable lengths and connectors Application Use when high quality, high reliability is needed; Standard distance inductive prox for ferrous metal sensing; 1200-PSI Washdown rated; Connector or pigtail versions; Easily customized; DC2W, DC3W, AC2W, AC/DC PROXIMITY SENSORS Long Barrel Cylindrical Dimensions mm (in) Dia. 4 x 25 (0.16 x 0.98); M5 x 25 (0.20 x 0.98); Dia. 5.4 x 25 (0.21 x 0.98); M8 x 26 (0.31 x 1.02); M12 x 33 (0.47 x 1.30); M18 x 38 (0.71 x 1.50); M30 x 43 (1.18 x 1.69) 19 21 IAmsg1-44.indd 19 1/5/07 1:02:12 PM Inductive Proximity Sensors Threaded Cylindrical Weld Field Immune E2F Product type Threaded Plastic Cylindrical E2QW Weld Field Immune Inductive Weld Field Immune 9-Way Configurable Inductive M12 x 76 M18 x 76 M30 x 76 M30 x 67 40 mm wide x 68.5 mm high * Weld field and noise immune * WFI circuitry is designed to operate within 1 inch of a resistance welding electrode at 20,000 Amperes RMS * NEMA 1, 3, 4, 6, 13 * AC/DC2W or DC3W-PNP type * M12, M18 M30 Barrel Sizes * Weld field and noise immune * IP67 * AC/DC2W or DC3W-PNP type * Extended Range WFI Proximity * Rotatable head configurable in 9 different sensing directions * 15 mm to 35 mm sensing ranges M12-2 mm, M18-5 mm, M30-10 mm 15 mm, 20 mm, 25 mm M12-4 mm, M18-8 mm, M30-15 mm 25 mm, 35 mm DC supply voltage 12 to 24 VDC (10-30 VDC operating) 10 to 30 VDC 10 to 30 VDC AC supply voltage 24 to 240 VAC (20 to 264 VAC operating) 20 to 230 VAC/DC 20 to 150 VAC/DC 2-wire DC output N/A - - 3-wire DC output NPN-NO, NPN-NC, PNP-NO, PNP-NC; 200 mA max. PNP-NO, 200 mA max. PNP-NO, 200 mA max. AC 2-wire output NO, NC; 100, 300 or 500 mA max. N.O. 500 mA max. N.O. 200 mA max. 16 Hz AC/DC-10 Hz, DC3W-150 Hz 4 Pin Euro for DC3W models 4 Pin Micro for DC3W models 3 Pin Micro for AC/DC models 4 Pin Euro for DC3W models 3 Pin Micro for AC/DC models Weld flash proof, hard coated metal housing; High temperature abrasion-resistant sensing face; NEMA: 1, 3, 4, 6, 13 Weld flash proof, hard coated metal housing; High temperature abrasion-resistant sensing face; NEMA: 1, 3, 4, 6, 13 Agency approvals UL (on US models), CSA UL, CSA UL, CSA Circuit protection DC Models: Output short circuit, surge absorber, reverse polarity; AC Models: Add -53 for short circuit protection and add -US for UL listed version DC models have non-latching short-circuit protection and reverse polarity protection; AC/DC2W models are latching SCP type with reverse polarity protection DC models have non-latching short-circuit protection and reverse polarity protection; AC/DC2W models are latching SCP type with reverse polarity protection Cordsets available 2M, 5M, 10M straight or 90's PVC with E-coated or SS coupling nuts; PUR Black with E-coated or SS coupling nuts; TPE coated cables with E-coated or SS coupling nuts Cordsets available 2M, 5M, 10M straight or 90's PVC with E-coated or SS coupling nuts; PUR Black with E-coated or SS coupling nuts; TPE coated cables with E-coated or SS coupling nuts Standard sensing distance; Weld field immune inductive proximity sensors for automotive weld lines and extremely harsh environments Extended sensing distance; Weld field immune inductive proximity sensors for automotive weld lines and extremely harsh environments Dimensions mm (in) M8 x 40 (0.31 x 1.57) M8 x 30 (0.31 x 1.18) M12 x 40 (0.47 x 1.57) M12 x 35 (0.47 x 1.38) M18 x 40 (0.71 x 1.57) M30 x 50 (1.18 x 1.97) Features * IP68 watertight construction withstands washdown * Plastic cylindrical inductive * AC 2-wire or DC 3-wire-NPN models * DC models have short-circuit protection and reverse polarity protection Shielded sensing distances 1.5, 2, 5, 10 mm Unshielded sensing distances N/A PROXIMITY SENSORS E2AW Response frequency 25 Hz to 2 kHz Connections PVC Cable 2 m standard, 5 or 10 m optional Enclosure Polyallylate; IEC IP68; NEMA: 1, 3, 4, 6, 12, 13 Other Alternate frequency versions; 5 m or 10 m cable lengths; Optional short circuit protection models; Optional UL listed AC versions Application Use when IP68 rating is needed; Use where metal barrels will corrode; Standard distance inductive prox for ferrous metal sensing DC3W or AC2W 20 22 IAmsg1-44.indd 20 1/5/07 1:02:24 PM Inductive Proximity Sensors Harsh Environment E2EQ Product type Teflon-Coated Cylindrical Inductive Dimensions mm (in) M12 x 38 (0.47 x 1.50) M18 x 47 (0.71 x 1.85) M30 x 56 (1.18 x 2.20) Features * Teflon-coated metal housing ensures high-tightening torque * Prewired versions available * Resistant to weld spatter * DC 2-wire * M12, M18, M30 barrel sizes * Long sensing distance type available: 4 mm to 15 mm E2KQ E2EC E2S Teflon Cylindrical Capacitive Subminiature Prox with In-Line Amp Subminiature Rectangular Inductive Prox M18 x 61.8 (0.71 x 2.43) Dia. 3 x 12 (0.12 x 0.47) Dia. 5.4 x 18 (0.21 x 0.71) Dia. 8 x 18 (0.31 x 0.71) M12 x 18 (0.47 x 0.71) 5.5 x 5.5 x 19 (0.22 x 0.22 x 0.75) 7.4 x 8 x 23 (0.29 x 0.31 x 0.91) 8 x 8 x 26 (0.31 x 0.31 x 1.02) * Oil-resistant cable * Sensitivity adjustment allows sensing range from 6 to 10 mm * Teflon mounting nuts and brass washers allow easy installation/maintenance * Subminiature cylindrical inductive prox with in-line amplifier * Robot cable for high-flex applications * DC 2-wire version reduces wiring time * Operation and stability indicator allows easy set-up and monitoring * Extended sensing distances * Economical large quantity OEM pricing * Vacuum potted internal circuitry * One-piece housing * Stainless steel M8 barrel versions * Wrench flats for easy installation * Superior barrel thickness and highest tightening torques available * Easily customized * Pre-wired or connector versions - 0.5, 0.8, 1.5, 2.5, 3, 4 mm 2, 4, 8, and 15 mm 6 to 10 mm N/A 4, 8, 16, 20, and 30 mm DC supply voltage 12 to 24 VDC 12 to 24 VDC 12 to 24 VDC 12 to 24 VDC (10-32 VDC operating) AC supply voltage - - N/A N/A 2-wire DC output NO; 100 mA max. - NO, NC; 100 mA max. NO, NC; 50 mA max. 3-wire DC output - NPN-NO; 100 mA max. NPN-NO, NPN-NC, PNP-NO, PNP-NC; 100 mA max.N/A NPN-NO, NPN-NC, PNP-NO,PNP-NC; 50 mA max. AC 2-wire output - - N/A N/A - 1 kHz to 1.5 kHz 1 kHz Robotic Cable 2 m or optional 5 m; Optional pigtail versions 1 m cable standard -13F to 158F -13F to 135F -13F to 135F IEC: IP66 IEC: IP67 (IP64 for DC 3-wire); NEMA: 1, 3, 4, 6, 12, 13 (for DC 2-wire only) IEC: IP67 Agency approvals - - - - Circuit protection Surge absorber and output short circuit Reverse polarity connection and surge absorber Surge absorber and output short circuit (DC 2-wire); Surge absorber (DC 3-wire) Reverse polarity connection and surge absorber - Alternate frequency versions Alternate frequency versions; Front and end sensing models Oil and chemical resistant for use in metal cutting, chemical hardening and welding operations Sub-miniature sensing head with in-line separate amplifier; Use when space is confined; Use in high-flex applications like robotic grippers; DC2W or DC3W Smallest rectangular sensor available; Extremely economical; Use when space is confined DC2W or DC3W Response frequency 0.4 kHz, 0.5 kHz, 1 kHz Connections PVC cable, 2 m PVC cable, 2 m M12 Micro Change(R) connector Ambient operating -13F to 158F temperature Enclosure IEC: IP67 Other - Application Automotive welding, machine tool PROXIMITY SENSORS Shielded sensing distances 3, 7, 10 mm (standard) Unshielded sensing distances - Miniature 21 23 IAmsg1-44.indd 21 1/5/07 1:02:29 PM Inductive Proximity Sensors Rectangular Ring Sensor TL-W Product type Miniature Rectangular Inductive 27 x 10 x 6 (1.06 x 0.39 x 0.24); Dimensions mm (in) 30 x 18 x 10 (1.18 x 0.71 x 0.39); 50 x 25 x 10 (1.97 x 0.98 x 0.39); 53 x 40 x 23 (2.09 x 1.57 x 0.91); Features * Space-saving, flat-pack DC sensor fits tight spaces * Rugged diecast metal or low-profile plastic housing models available * Mounts directly to metal base or rail * DC 3-wire and DC 2-wire models PROXIMITY SENSORS Shielded sensing distances 5 mm Unshielded sensing distances 3, 5, 20 mm F2LP-W Ring-Shaped Inductive Sensing Head Amp: 75 x 67.5 x 74 (2.95 x 2.66 x 2.91) Sensors: 10 (0.39) ID: 37 x 24 x 10 (1.46 x 0.94 x 0.39) 20 (0.79) ID: 65 x 50 x 16 (2.56 x 1.97 x 0.63) 50 (1.97) ID: 96 x 110 x 26 (3.78 x 4.33 x 1.02) 75 (2.95) ID: 155 x 130 x 40 (6.10 x 5.12 x 1.57) 100 (3.94) ID: 185 x 170 x 45 (7.28 x 6.69 x 1.77) * Detects moving metal objects anywhere inside of the ring * Separate amplifier, can be surface or track mounted * Ideal for counting parts 0.3, 2, 2.5, 3 mm min. - DC supply voltage 10 to 30 VDC - AC supply voltage - 120 to 240 VAC 2-wire DC output - - 3-wire DC output NPN-NO, NPN-NC, PNP-NO,PNP-NC; 100 or 200 mA max. - AC 2-wire output - SPDT relay; 3A max. NPN-NO; 100 mA max. Response frequency 40 Hz to 600 Hz Connections 2 m cable standard Ambient operating -13F to 158F temperature Enclosure IEC: IP67 NEMA: 1, 2, 3, 4X, 6, 12, 13 75 to 125 ms between objects Amp: Screw terminals; Sensors: 3 m cable standard Amp: 14F to 131F Sensors: -13F to 158F IEC: IP67 (IP30 for amplifier) Agency approvals UL, CSA, CE UL, CSA Circuit protection Reverse polarity connection and surge absorber (DC 3-wire); short circuit protection (DC 2-wire) - Other - Application Space confined installations in conveyor rails, and end-of-travel and home position robotic applications Amplifier has 40 ms OFF delay and one-shot timing functions Small parts assembly, electronics assembly, automotive applications 22 24 IAmsg1-44.indd 22 1/5/07 1:02:36 PM Capacitive Proximity Sensors E2K-F Product type Flat-Pack Rectangular Capacitive Dimensions mm (in) 50 x 20 x 10 (1.97 x 0.79 x 0.39) Features * Flat, thin capacitive sensor fits space confined installations * Ideal for mounting directly to metal walls * Detects glass, plastic, wood, water, oil and metals * Fixed distance or adjustable models E2K-X E2K-C E2J Threaded Cylindrical Capacitive Adjustable Cylindrical Capacitive Adjustable Flat Rectangular Capacitive M12 x 80 (0.47 x 3.15); M18 x 80 (0.71 x 3.15); M30 x 80 (1.18 x 3.15) 34 Dia. x 82 (1.34 x 3.23) Amp: 59 x 12 x 29 (2.32 x 0.47 x 1.14) Sensors: 30 x 20 x 5.5 (1.18 x 0.79 x 0.22) 40 x 30 x 5.5 (1.57 x 1.18 x 0.22) * Separate amplifier with adjustable sensitivity * Compact sensing heads * Highly flexible robotic-grade cable * DC 3-wire NPN open collector - - - 4, 8, 15 mm 3 to 25 mm adjustable 10 mm, 20 mm DC supply voltage 10 to 30 VDC 10 to 30 VDC 10 to 40 VDC 24 VDC AC supply voltage - 90 to 250 VAC 90 to 250 VAC - 2-wire DC output - - - - 3-wire DC output NPN-NO, NPN-NC; 100 mA max. NPN-NO, NPN-NC, NPN-NO, NPN-NC, PNP-NO, PNP-NO,PNP-NC; 200 mA max. PNP-NC; 200 mA max. NPN-NO/NC; 100 mA max. AC 2-wire output - NO, NC; 200 mA max. NO, NC; 200 mA max. - 10 Hz to 100 Hz 10 Hz to 70 Hz 70 Hz 2 m cable 2 m cable Amp: 2 m cable; Sensor: 1 m cable -13F to 158F -13F to 158F 14F to 131F IEC: IP66 NEMA: 1, 4, 12, 13 IEC: IP66 NEMA: 1, 4, 12, 13 IEC: IP66 (IP50 for amplifier) Agency approvals - UL UL - Circuit protection Reverse polarity connection AC2W: Surge absorber; DC3W: Reverse polarity connection and surge absorber AC2W: Surge absorber; DC3W: Reverse polarity connection and surge absorber Output short circuit, surge absorber, reverse polarity connection - Mounting bracket included - General purpose type for plastics, level control Tank sight glass for level control; non-metallic container fill inspection Ideal for robot hands and various built-in applications for material handling and assembly verification such as CD-ROMs in jewel cases Shielded sensing distances - Unshielded sensing distances 10 mm Response frequency 100 Hz Connections 3 m cable standard Ambient operating 14F to 131F temperature Enclosure IEC: IP66 NEMA: 1, 4, 12, 13 Other New adjustable sensing distance models available Application Sensing non-metallic target, ideal for semiconductor and plastics, level control applications PROXIMITY SENSORS * Threaded-body sensors detect * Built-in amplifier allows glass, wood, water oil, plastic adjustable detecting distances and metal * Allows indirect detection of * Fixed sensitivity for simple objects inside non-metallic installation containers * Operation indicator, all models * AC 2-wire and DC 3-wire * AC 2-wire and DC 3-wire models models 23 25 IAmsg1-44.indd 23 1/5/07 1:02:39 PM Limit Switches Omron Smart Solutions Heavy-duty, general-purpose limit switches feature plug-in construction for easy installation and long service life. Compact enclosed switch is triple sealed for reliable operation, and comes connectorready for quick servicing or replacement without rewiring. Enclosed limit switch with large breaking capacity with wide range of actuators, also available in sealed versions. 24 IAmsg1-44.indd 24 1/18/07 10:16:03 AM Limit Switches D4A-N Dimensions mm (in) 104.5 H x 42.0 W x 44 D (4.11 x 1.65 x 1.73) Features * Heavy-duty, general-purpose limit switch * Convenient plug-in construction for easy installation and field maintenance * Waterproof and oil-tight Switching capacity 10 A continuous - 120, 240, 480, 600 VAC, NEMA A600 (SPDT without indicator); 10 A continuous - 120, 240 VAC NEMA A300 (SPDT with indicator); 5 A continuous - 120, 240, 480 600 VAC NEMA B600 (DPDT, without indicator) Contact configuration SPDT or DPDT double break Mechanical service life 50 million minimum (SPDT); 30 million (operations) minimum (DPDT) WL 94.1 H x 40.0 W x 41.5 D (3.70 x 1.57 x 1.63) D4C 55 H x 40 W x 16 D (2.17 x 1.58 x 0.63) * CE approved * CE approved * General-purpose single pole/double break * Compact, high-precision prewired limit switch enclosed limit switch * Wide variety of standard, high-precision * Slim-line body design ideal for limited and overtravel types access areas and gang mounting * Waterproof, oil-tight and dust-proof construction 10 A, 125 VAC inductive load; NEMA A600 5 A, 125 VAC, resistive load; NEMA B300 SPDT double break SPDT (form C) 15 million minimum 10 million minimum Connection 1/2-14 NPT conduit entrance, terminal screws 1/2-14 NPT conduit entrance, terminal screws Prewired with 3 meters (9.8 ft.) cable Actuators Side rotary, use separate levers; Plain side plunger; Vertical side roller plunger; Horizontal side roller plunger; Adjustable side plunger; Plain top plunger; Top roller plunger; Adjustable roller plunger; Spring wire wobble lever; Plastic rod wobble lever; Cat whisker wobble lever; Coil spring wobble lever UL 3, 4 and 13; NEMA 1, 2, 3, 3R, 4X, 5 6P, 12 and 13; IP67 UL 3, 4 and 13; NEMA 1, 3, 3R, 4, 5, 6, 12 and 13; IP67 Short, medium and long roller levers; Flush mounting roller lever; Flange mounting roller lever; Adjustable roller lever; Adjustable rod lever; Fork roller levers; Plain top plunger; Top roller plunger; Top ball plunger; Plain side plunger; Side roller plunger; Side ball plunger; Steel wire wobble lever; Nylon rod wobble lever; Coil spring wobble levers Pin plunger; Sealed plunger; Roller plunger; Sealed roller plunger; Crossroller plunger; Sealed cross roller plunger; Bevel plunger; Coil spring; Roller lever LIMIT SWITCHES Enclosure rating UL 3, 4, 4X, 6P and 13; NEMA 1, 2, 3, 3R, 4X, 5, 6P, 12 and 13; IP67 25 27 IAmsg1-44.indd 25 1/5/07 1:03:01 PM Limit Switches D4CC Dimensions mm (in) 73.2 H x 40 W x 16 D (2.88 x 1.58 x 0.63) Features * Compact, connector-ready enclosed limit switch * Triple sealed construction * Quickly replace or service the switch without rewiring Switching capacity 1 A, 125 VAC resistive load; 1 A, 30 VDC resistive load Contact configuration SPDT (form C) Mechanical service life 10 million minimum (operations) Connection Accepts Omron's Y96E or Brad Harrison MicroChangeTM connector cordsets LIMIT SWITCHES Enclosure rating UL 3, 4 and 13 (pending for DC types); NEMA 1, 3, 3R, 4, 5, 6, 12 and 13; IP67 Actuators Center rotary roller lever; Pin plunger; Roller plunger; Crossroller plunger; Bevel plunger; Low operating force roller lever; Sealed plunger; Sealed roller plunger; Sealed crossroller plunger; Panel mount pin plunger; Panel mount roller plunger; Panel mount crossroller plunger; Plastic rod lever ZE/ZV/ZV2 ZC 102.1 H x 25.4 W x 86 D (4.02 x 1.00 x 3.39) 65.4 H x 21.5 W x 60 D (2.58 x 0.85 x 2.36) * Enclosed limit switch with a large breaking capacity * Choose among side-mounting (ZE), diagonal side mounting (ZV2) and base-mounting (ZV) housings * Ideal for gang mounting * Small high-precision limit switch that responds to small operating force * Models available with rubber seal boot to protect the actuator 15 A, 125 VAC, inductive load 10 A, 125 VAC, inductive load; NEMA A300 SPDT (form C) SPDT (form C) 10 million minimum 10 million minimum 1/2-14 NPT conduit entrance, terminal screws Terminal screws or prewired with 1 m (3.28 ft) cable NEMA 1, 2, 3, 4, 5, (-N type); 1 (-Q type); IP60 (-Q); IP65 (-N) NEMA 1, 2, 3, 4, 5, 13; IP67 Top plunger; Roller plunger; Crossroller plunger; Roller arm lever; One-way action arm lever; Rod lever; Coil spring (ZE, ZV); Maintained contact plunger (ZE, ZV); Sealed versions of all actuators available Pin plunger; Panel mount plunger; Panel mount roller plunger; Panel mount cross roller plunger; Sealed roller plunger; Sealed cross roller plunger; Short hinge lever; Hinge lever; Short hinge roller lever; Hinge roller lever; One-way action short hinge roller lever; One-way action hinge roller lever 26 28 IAmsg1-44.indd 26 1/5/07 1:03:07 PM Other Sensor Solutions Omron Smart Solutions Detect products regardless of color, texture or glossiness at long range. Also detects powder in storage tanks. Compact sensors with or without digital displays help monitor gauge pressure, vacuum and differential pressure conditions. Incremental and absolute encoders provide reliable positioning feedback for motors, lifts and other rotating equipment. 27 IAmsg1-44.indd 27 1/5/07 1:03:21 PM Pressure Sensors E8Y Dimensions mm (in) 31 x 30 x 29.8 (1.22 x 1.18 x 1.17) E8F2 E8M/E8MS 28 x 28 x 29 (1.10 x 1.10 x 1.14) 29.7 H x 15 dia. (max.) (1.17 x 59 dia. [max.]) 26 H x 19 W x 42.5 D (1.02 X 0.75 X 1.67) 31 H x 27.5 dia. (1.22 x 1.08) * Mini-cube * Miniature and light weight * Digital and analog display * CE approved * Miniature * Separate controller * Small and light weight * Programmable multi-channel outputs kPa, torr, psi E8M = None, K3C = kPa, kgf/cm2, mmHg, mmH2O - 0 to 0.145 psi (0 to 1kPa) [E8M-A1] 0 to 14.5 psi (0 to 100 kPa) 0 to 145 psi (0 to 1 MPa) 0 to 14.5 psi (0 to 100kPa) [E8MS-01] 0 to 145 psi (0 to 1MPa) 0 to -14.6 psi (0 to -101 kPa) 0 to -14.5 psi (0 to -101kPa) Non-corrosive, non-flammable gases or air Non-corrosive, non-flammable gases or air NPT 1/8 or M5 PT 1/8 or M5 12 to 24 VDC 12 VDC sensor, 24 VDC controller Analog 4 to 20 mA 1 to 5 V 1 to 5 V On / Off 100 mA, NPN open collector 30 mA, NPN open collector 30 mA, NPN open collector IP50 IP50 Features * Cube, miniature package * Easy-to-read LED display * Programmable teach modes * CE approved Display units psi or kPa Pressure range available Differential pressure 0 to 0.29 psi (0 to 2 kPa) 0 to 0.725 psi (0 to 5 kPa) Positive pressure - PRESSURE SENSORS Negative pressure - Applicable material Non-corrosive, non-flammable gases or air Pressure port 4.5 mm dia. resin pipe or NPT 1/8 Supply voltage 12 to 24 VDC Output Enclosure IP40 28 30 IAmsg1-44.indd 28 1/5/07 1:03:26 PM Pressure Sensors E8CB Dimensions mm (in) 15 x 26.8 x 52.5 (0.59 x 1.06 x 2.07) E8CC E8EB 15 x 29.5 x 67 (0.59 x 1.16 x 2.64) 17.5 x 30 x 44 (0.69 x 1.18 x 1.73) * Display flat pack * Slim package - 15 mm wide * DIN rail mount compatible * LCD display kPa, kgf/cm2, cmHg * General purpose * Analog and digital outputs * NPN and PNP outputs available - - 0 to 14.2 psi (0 to 98 kPa) 0 to 142.1 psi (0 to 980 kPa) 0 to 14.2 psi (0 to 98 kPa) 0 to 142.1 psi (0 to 980 kPa) 0 to -14.6 psi (0 to -101 kPa) 0 to -14.2 psi (0 to -98 kPa) Non-corrosive, non-flammable gases or air Non-corrosive, non-flammable gases or air NPT 1/8 or M8 NPT 1/8 12 to 24 VDC 24 VDC Analog 1 to 5 V 1 to 5 V 1 to 5 V On / Off 80 mA, NPN open collector 80 mA, NPN open collector 80 mA, NPN or PNP open collector IP50 IP54 Features * Flat pack * Slim package, just 15 mm wide * Two-turn pressure adjustment Display units None None Pressure range available Differential pressure - Positive pressure 0 to 14.2 psi (0 to 98 kPa) Negative pressure 0 to -14.6 psi (0 to -101 kPa) Applicable material Non-corrosive, non-flammable gases or air Pressure port NPT 1/8 or M7 Supply voltage 12 to 24 VDC Output PRESSURE SENSORS Enclosure IP50 29 31 IAmsg1-44.indd 29 1/5/07 1:03:33 PM Encoders E6A2 Dimensions mm (in) 25 dia. x 29 L (0.98 x 1.14) E6C2-C E6C3-CWZooH 40 dia. x 39 L (1.57 x 1.54) 50 dia. x 60 L (1.97 x 2.36) 50 dia. x 38 L (1.97 x 1.50) 6 (0.24) 6 (0.24) 8 (0.32) Incremental Incremental Incremental * CE approved * Ideal for most general-purpose applications * Extended signal transmission distances * Zero phase can be easily adjusted using origin indicating function * Line driver output available * Drip-proof construction * Shaft withstands heavy loads, 5 kgf radially, 3 kgf thrust (axially) * Short circuit protection * Space-saving, A-slant cable protrusion for ease of mounting * CE approved and available with complimentary outputs for interfacing to NPN or PNP inputs * Drip-proof construction * Surge protection * Ideal for tough environments 10 to 2,000 pulses/revolution 10 to 2,000 pulses/revolution 100 to 3,600 pulses/revolution Outputs A, B and Z (reversible) Outputs A, B, and Z (reversible) - - - Line driver AA, BB, and ZZ Outputs A, B and Z (reversible) 9045 9045 9045 100 kHz (100,000 pulses/sec) 100 kHz (100,000 pulses/sec) 100 kHz (100,000 pulses/sec) Maximum rpm 5,000 rpm 3,000 rpm 6,000 rpm 6,000 rpm Supply voltage 5 to 12 VDC, 12 to 24 VDC 5 to 12 VDC; 5 to 24 VDC; 5 VDC 5 to 12 VDC; 5 to 24 VDC; 5 VDC; 12 to 24 VDC 5 to 24 VDC 50 mA max. 160 mA max. 100 mA 2 k output impedance (voltage output); 35 mA (NPN open collector output); -20 to 20 mA (line driver) 35 mA max. (NPN or PNP open collector); 2 k output impedance (voltage output); -20 to 20 mA (line driver) 35 mA max. (NPN or PNP open collector) 3 kgf (21.7 ft-lbs.) 5 kgf (11.0 ft-lbs.) 80 N 2 kgf (14.5 ft-lbs.) 3 kgf (21.7 ft-lbs.) 50 N 10 g-cm (0.14 oz.-inch) 100 gf x cm (9.8 mN x m) max. (7.2 m ft x lbf) 100 g-cm (1.39 oz.-inch) IP50 IEC IP64 IEC60925 IP65 -10 to 70C (14 to 158F) -10 to 70C (14 to 158F) with no icing -10 to 70C (14 to 158F) E69-C06B supplied, two 6 mm dia. shafts. Optional couplers for 8 and 10 mm dia. shafts Order separately. E69-C06B 6 mm; E69-C68B 6 to 8 mm; E69-C06M metal 6 mm Order separately. Choose E69-C08B for the 8 mm dia. shaft Shaft diameter mm (in) 4 (0.16) Type Incremental Features * CE approved miniature sized encoder * Small operating torque * Ideal for small and high-density equipment * Zero index function for positioning applications available Resolution 10 to 360 pulses/revolution Output phase(s) Output A; Outputs A & B (100, 200 pulses/rev only); Outputs A, B & Z (100, 200 pulses/rev only) Output phase difference 9045 ENCODERS E6B2 Maximum response 300 kHz frequency (30,000 pulses/sec) Current consumption 50 mA max. Output form and capacity 2 k output impedance (voltage output); 30 mA (NPN open collector output) Shaft loading: radial 1 kgf (7.2 ft-lbs.) Shaft loading: axial 0.5 kgf (3.6 ft-lbs.) Starting torque 10 g-cm (0.14 oz.-inch) Degree of protection: IEC 144 IP50 Ambient operating -10 to 55C temperature (14 to 131F) Shaft coupler E69-C04B supplied; two 4 mm dia. shafts 30 32 IAmsg1-44.indd 30 1/5/07 1:03:35 PM Encoders E6D Dimensions mm (in) 55 dia x 50 L (2.17 x 1.97) E6C3-A E6CP E6F 56 dia. x 50 L (2.21 x 1.97) 60 dia. x 60 L (2.36 x 2.36) 8 (0.32) 6 (0.24) 10 (0.39) Absolute Absolute Absolute * CE approved and now available with PNP outputs for interfacing to allow more flexible interfacing to other devices * High resistance to shock * Drip-proof construction * Heavy duty absolute encoder * Reliable 8-bit resolution and gray code binary output * Gray code binary output with 8-bit resolution or BCD output with 10-bit resolution * Direct connections to highspeed counters, position control modules for PLCs or Omron's H8PS cam positioner 256, 360, 720, 1,024 pulses/ revolution 256 pulses/revolution 256 or 360 pulses/revolution Gray code Gray code binary Gray code binary or BCD (detects in gray-codes; converts to BCD) - - - 20 kHz (20,000 pulses per second) 5 kHz (5,000 pulses per second) 5 (E6F-AB3C) or 10 (E6F-AG5C) kHz (5,000 or 10,000 pulses per sec.) 5,000 rpm 1,000 rpm 5,000 rpm 5 to 12 VDC (A6CP-AG3C); 12 to 24 VDC (E6CP-AG5C) 5 to 12 VDC (E6F-AB3C); 12 to 24 VDC (E6F-AG5C) 70 mA 90 mA max. (A6CP-AG3C); 70 mA (E6CP-AG5C) 50 mA max (E6F-AB3C); 70 mA (E6F-AG5C) 35 mA (NPN and PNP open collector) 16 mA (NPN open collector transistor) 35 mA (NPN open collector transistor) Shaft loading: radial 5 kgf (36.2 ft-lbs.); 2 kgf (14.5 ft-lbs.) typical 80 N 3 kgf (21.7 ft-lbs.) 10 kgf (72.3 ft-lbs.) Shaft loading: axial 3 kgf (21.7 ft-lbs.); 1 kgf (7.2 ft-lbs.) typical 50 N 2 kgt (14.5 ft-lbs.) 3 kgf (21.7 ft-lbs.) 100 g-cm (1.39 oz.-inch) 10 g-cm (0.14 oz.-inch) 100 g-cm (1.39 oz.-inch) IEC60925 IP65 IP50 IP52 -10 to 70C (14 to 158F) -10 to 70C (14 to 158F) -10 to 70C (14 to 158F) Type Incremental Features * Super accuracy and high response frequency Resolution 720 to 6,000 pulses/revolution Output phase(s) Outputs A, B, and Z (reversible) Output phase difference 9025 Maximum response 200 kHz frequency (pulses per (200,000 pulses/sec) second) Maximum rpm 12,000 rpm Supply voltage 5 VDC (voltage output); 12 VDC 12 to 24 VDC (open collector output) Current consumption 150 mA max. Output form and capacity 35 mA max. (voltage and NPN open collector output) Starting torque 100 g-cm (1.39 oz.-inch) Degree of protection: IEC 144 IP50 Ambient operating -10 to 70C temperature (14 to 158F) Shaft coupler E69-C06B supplied, two 6 mm dia. shafts Order separately. E6CP-AG3C - E-69-C06B Choose E69-C08B for the 8 mm supplied, two 6 mm dia. shafts. dia. shaft Optional couplers for 8 and 10 mm dia. shafts. E6CP-AG5C - Order separately. Choose 6 mm dia. couplers for 6, 8, 10 mm dia. shafts ENCODERS 50 dia. x 38 L (1.97 x 1.50) Shaft diameter mm (in) 6 (0.24) 2 options: For E6F-AG5C, order sep. Choose 6 mm dia. couplers for 6, 8 & 10 mm dia. shafts. For E6F-AB3C, E69CO6B supplied, Two 6 mm dia. shafts. Optional couplers for 8 & 10 mm dia. shafts 31 33 IAmsg1-44.indd 31 1/5/07 1:03:41 PM Ultrasonic E4A Dimensions mm (in) Amplifier type Features E4B E4C E4E E4R 104 H x 50 W x 150 D (4.09 x 1.97 x 5.91) 61 H x 35 W x 79 D (2.40 x 1.38 x 3.11) 18 Dia. x 75 L (0.71 x 2.95) 36 H x 18 W x 25 D (1.42 x 0.71 x 0.98) 80 H x 46 W x 52D (3.15 x 1.81 x 2.05) Built-in amplifier Built-in amplifier Separate amplifier Built-in amplifier Separate amplifier Ultrasonic reflective; Mutual interference protection; Clear material detection; Photo sensitive film sensing Ultrasonic through-beam and reflective; Narrow 8 degree beam; Zone and setting distance models Ultrasonic through-beam and reflective; Compact threaded body; Mutual interference protection; Zone setting mode Extremely compact self-contained ultrasonic sensor; Through-beam; Separate NO and NC models Ultrasonic reflective sensor; Wide beam angle for granular and high viscosity materials - 1 m, 500 mm 500 mm 300 mm - 0.3 to 3 m 200 to 700 mm, 50 to 200 mm 100 to 350 mm - 2.5 m 120 and 240 VAC 12 to 24 VDC 12 to 24 VDC 12 to 24 VDC 12 VDC Detection method and sensing distance Through-beam type Reflective Supply voltage 12 to 24 VDC ULTRASONIC SENSORS Control outputs AC 3 A Relay, SPDT - - - 4 A Relay, SPDT DC - 100 mA NPN or PNP open collector 100 mA, NPN/PNP open collector, selectable 100 mA, NPN open collector, NO or NC - Alarm - - - - - 250 ms 10 ms 10 ms (200 Hz) 25 ms 150 ms Plastic, ABS Plastic, ABS Plastic, ABS IP66 IP66 sensor; IP40 amp. Plastic, ABS IP66 Plastic, ABS IP60 Response time Materials Enclosure rating IP10 32 34 IAmsg1-44.indd 32 1/5/07 1:03:46 PM Pushbuttons, Switches and Pilot Devices Omron Smart Solutions Easy-to-install illuminated and non-illuminated switches are available with momentary and alternate action types. Selector switches and key switches are available in twoand three-position versions. Indicator lights and buzzers help operators monitor status effectively. 33 IAmsg1-44.indd 33 1/5/07 1:04:05 PM 22 mm Pushbuttons, Switches and Pilot Devices Non-Illuminated Shape Pushbutton Round Flush Part number A22-F Selector Switch Round Extended A22-T Round Full-Guard A22-G Round Half-Guard A22-H 30 mm Mushroom A22-S 40 mm Mushroom A22-M Square Extended A22-C Square Full-Guard A22-D 2- or 3position knob A22S Appearance Color uuuuuu uuuuuu uuuuuu uuuuuu uuuuuu uuuuuu uuuuuu uuuuuu u Shape Selector Switch Key Switch Extended Lever PUSHBUTTONS, SWITCHES, AND PILOT DEVICES 2- or 3position knob Part number A22S Emergency Stop 2- or 3position knob A22K Push-pull 40 mm dia. A22E-MP Push-pull 60 mm dia. A22E-LP Push-lock, turn-reset 30 mm dia. A22E-S Push-lock, turn-reset 40 mm dia. A22E-M Push-lock, turn-reset 60 mm dia. A22E-L Push-lock, key-reset 30 mm dia. A22E-SK Push-lock, key-reset 40 mm dia. A22E-MK u u u u u u u u Appearance Color u Illuminated Shape Selector Switch Pilot Light Pushbutton Round Extended Part number A22L-T Emergency Stop Push-lock, turn-reset 40 mm dia. A22EL-M Round Half-Guard A22L-H Round Full-Guard A22L-G Square Extended A22L-C Square Full-Guard A22L-D 2- or 3position knob A22W Round M22-F Square M22-C uuuuu uuuuu uuuuu uuuuu uuuuu uuuuu uuuuuu u Appearance Color uuuuu 34 36 IAmsg1-44.indd 34 1/5/07 1:04:11 PM 16 mm Pushbuttons, Switches and Pilot Devices Non-Illuminated Shape Part number Pushbutton Selector Switch Round A165-T Round 2- or 3position knob A165S-T Square A165-A Rectangle A165-J Key Switch Square 2- or 3position knob A165S-A Rectangular 2- or 3position knob A165S-J Round 2- or 3position knob A165K-T Square 2- or 3position knob A165K-A Rectangular 2- or 3position knob A165K-J u u u u u Appearance Color uuuuuu uuuuuu uuuuuu u Shape Buzzer Rectangular Standard and high sound Part number M2BJ Emergency Stop Push-lock, turn-reset A165E-S NOTE: A16 - IP40 A165 - IP65 oiltight Color u u Also available: 40 mm dia. A165E-M Illuminated Shape Selector Switch Pushbutton Round Part number A165L-T Square A165L-A Rectangle A165L-J Round 2- or 3position knob A165W-T uuuuu uuuuu uuu Square 2- or 3position knob A165W-A Rectangular 2- or 3position knob A165W-J uuu uuu Appearance Color uuuuu Shape Pilot Lights Round Part number M165-T Emergency Stop Square M165-A Rectangle M165-J uuuuu uuuuu Push-lock, turn reset 30 mm dia. A165E-LS NOTE: A16 - IP40 A165 - IP65 oiltight PUSHBUTTONS, SWITCHES, AND PILOT DEVICES Appearance Appearance Color IAmsg1-44.indd 35 uuuuu u Also available: 40 mm dia. A165E-LM 35 37 1/5/07 1:05:42 PM Power Supplies Omron Smart Solutions Slim DIN track-mounting power supplies from 15 to 240 W are UL508 listed for operation at full rating. Digital display and preventive maintenance output available for load duration and power supply service life. Versatile power supplies offer 3 W to 100 W output in a wide range of voltages for general industrial applications. DIN track and bolt-on mounting. Block-type power supply allows multiple configurations for custom voltages or mixed output loads using a few easily stocked parts. 36 IAmsg1-44.indd 36 1/5/07 1:06:40 PM Power Supplies S8VS S82K S8PS S8TS * DIN rail mount power supply with a wide power range * Suitable for general purpose and rugged industrial applications * Lightweight for easy DIN rail mount installation * Compact DIN rail mounting industrial power supply with high power capacity * Slim metal housing designed for rugged industrial application * A versatile unit that could be installed in many different ways * High-end, block type power supply easily connects with multiple units and offers many output configurations * Ideal for applications where increase of power may be required Mounting DIN rail DIN rail / Bolt-on DIN rail / Bolt-on DIN rail Enclosed frame with plastic housing Open or covered frame with metal housing Plastic housing, block-style configuration Single and dual output Single output Configures to user's choice 3, 7.5, 15, 30, 50, 90 and 100 W 50, 100, 150, 300 and 600 W 25 W, 30 W, and 60 W per single unit; Expandable up to 240 W by ganging the units together 5 V: 0.6A, 1.5A, 2.5A, 5.0A; 12 V: 0.25A, 0.6A, 1.2A, 2.5A; 15 V: 0.2A, 0.5A; 24 V: 0.13A, 0.3A, 0.6A, 1.3A, 2.1A, 3.75A, 4.2A, 12 V/+0.3/-0.2A; 15 V/+0.2/-0.2A 5 V: 10 A; 12 V: 4.2 A; 24 V: 2.1 A, 4.5 A, 6.5 A, 14 A, 27 A 5 V: 5 A, 12 V: 2.5 A, 24 V: 2.5 A (this is per unit values); When ganged together, values could go up to 12 V: 10 A, 24 V: 10 A 85 to 264 VAC, 47 to 450 Hz; 85 to 132 VAC, 170 to 264 VAC (selectable), 85 to 253 VAC, 47 to 450 Hz (selectable) 85 to 264 VAC, 47 to 450 Hz 85 to 264 VAC, 47 to 63 Hz 3 W, 7.5 W: 75 H x 37.5 W x 65 D (2.95 x 1.48 x 2.56); 50 W: 85 H x 40 W x 127 D (3.35 x 1.57 x 5.0); 120 H x 43 W x 120 D (4.72 x 1.69 x 4.72) 90 W: 115 H x 50 W x 121.3 D (4.53 x 1.97 x 4.78) 15 W: 75 H x 45 W x 96 D (2.95 x 1.77 x 3.78); 100 W: 92 H x 50 W x 145 D (3.62 x 1.97 x 5.71); 120 W: 115 H x 50 W x 121.3 D (4.53 x 1.97 x 4.78) 30 W, 50 W: 75 H x 90 W x 96 D (2.95 x 3.54 x 3.78); 150 W: 92 H x 50 W x 163 D (3.62 x 1.97 x 6.42); 180 W: 115 H x 75 W x 125.3 D (4.53 x 2.95 x 4.93) 90 W, 100 W: 75 H x 145 W x 96 D (2.95 x 5.71 x 3.78) 300 W: 92 H x 110 W x 175 D (3.62 x 4.33 x 6.89); Product type Enclosed frame with metal and plastic housing Output Single output Power ratings 15, 30, 60, 90, 120, 180 and 240 W Output voltage/current 24 V: 2.5 A, 3.75 A, 5 A, 7.5 A, 10 A Input voltage 85 to 264 VAC, 47 to 450 Hz Dimensions mm (in) 60 W: 95 H x 40 W x 108.3 D (3.74 x 1.57 x 4.26) 600 W: 92 H x 170 W x 179 D (3.62 x 6.69 x 7.05) 240 W: 115 H x 100 W x 125.3 D (4.53 x 3.94 x 4.93) Two LED lights; one for poweron indicator and the other for output-on indicator LED light for output-on indicator Two LED lights; one for poweron indicator and the other for output-on indicator Alarm output 90, 120, 180, 240 W models with display have NPN outputs Relay output available on 90 and 100 W models. None NPN output for when the output voltage drops Approvals cULus, UL508 listed, Class 2 output (60 W only), CE, SEMI F47-0200 UL508 listed, Class 2 output (up to 90 W), CSA, CE UL508 listed, CSA, VDE, CE cULus, UL508 listed, VDE, CE Display/indication 3-digit, 7-segment LED; LED status displays for output voltage, output current, peak current, lifetime years, run time hours POWER SUPPLIES Features * Small sized, DIN rail mount power supply with LED display * Suitable for any application and any environment * Digital displays to predict and schedule maintenance for improved uptime 37 IAmsg1-44.indd 37 1/5/07 1:07:28 PM Timers, Counters, and Panel Meters Omron Smart Solutions Digital 1/16 DIN counter with preset, total, batch and dual counting functions offers bi-color display to alert changes in output status. NEMA 4/IP66 front panel needs no additional protection. Digital multifunction timer in 1/16 DIN size has a shallow mounting depth and NEMA 4/IP66 front panel without additional protection. Bi-color present value display can change from red to green to alert changes in output status. Display the results of analog inputs and get control outputs indicating good/ no good status with Omron's 1/8 DIN size process, temperature, rate and weight meters. 38 IAmsg1-44.indd 38 1/5/07 1:07:42 PM Timers H5CX Dimensions mm (in) H3CA H5BR H3CR-A H3CR-F 48 H x 48 W x 68 D (1.89 x 1.89 x 2.68) 48 H x 48 W x 66 D (1.89 x 1.89 x 2.62) * Advanced * Digital set, solid-state programmable display timer with twin timer function * LCD time remaining * PNP/NPN input bar graph and output * Programmable via status indicators front or dip switches * Switch selectable time on back unit, control mode and * NEMA 4 front time limit setting * 1/16 DIN plug-in unit * Batch counting function records the number of completed cycles * Nine field-selectable timing modes * Scroll-through menus access from front panel * Shallow mounting depth and wide range of panel covers * Analog set, 1/16 DIN sized solid-state timer * Analog set, solid-state timer with combinations of independent ON/OFF time settings in a compact 1/16 DIN size * Models with ON start or OFF start operating functions * Fits standard 8- or 11-pin sockets Multi-mode ON-delay/Multi-mode Multi-mode ON-delay and one-shot Interval/Multi-mode Twin timer Control outputs Time limit - SPDT, 5A at 250 VAC, Transistor, NPN, 100 mA at 30 VDC Time limit - DPDT or SPDT, 3A 250 VAC; Instantaneous - SPDT, 3A, 250 VAC (H3CA-8H only) 1 SPDT relay and 2 NPN open collector transistor outputs Time limit - DPDT, 5A, 250 VAC Transistor, 100 mA, 30 VDC (PNP/NPN) Instantaneous - DPDT, 5A, 250 VAC Transistor, 100 mA, 30 VDC (NPN/ PNP) Time limit - DPDT, 5A, 250 VAC; Instantaneous - DPDT, 5A, 250 VAC Operation modes 12 selectable modes including ON-delay, repeat cycle, signal OFF-delay, interval, cumulative, ON/OFF duty adjustable cycle, twin timer 8 selectable modes including ON-delay only or multi-mode model with ON-delay, repeat cycle, signal interval/ OFF-delay, 2 types of signal OFF-delay, interval, cycle and signal ON-delay/OFF-delay 9 selectable modes including ON-delay, repeat cycle, signal OFF-delay, interval, cumulative Repeat cycle: Select 2-4-6 function Independent ON or OFF models including ONtime delay and one-shot, interval or selectable ON-delay, repeat cycle (two types), signal ON/OFF delay, signal OFF delay, interval 0.001 second to 9999 hours 0.1 second to 9990 hours (field selectable time units from 0.1 sec to 10 h x 3 digits) 0.001 second to 9999 hours (field selectable) 0.05 second to 300 hours or 0.1 second to 600 hours 0.05 second to 30 hours; 1.2 second to 300 hours Display/indication 4-digit negative transmissive LCD; Programmable display color for output indication LCD output status and percent time remaining bar graph Alphanumeric 4-digit LCD display has 12 mm high characters and built-in backlight Power ON, Output ON LEDs Output ON and Output OFF LEDs Supply voltage 100 to 240 VAC or 24 VAC / 12 to 24 VDC 24 to 240 VAC, 50/60 Hz and 12 to 240 VDC (8-pin model) 24, 100/110/120, 200/220/240 VAC, 50/60 Hz 12, 24, 48, 110 VDC 100 to 240 VAC, 50/60 Hz or 24 VAC, 50/60 HZ and 12 to 24 VDC AC 100 - 240/ DC 100-125; DC 24 to 48/ DC 12 - 48 100 to 240 VAC, 50/60 Hz 12 VDC; 24 VAC/VDC Panel, track, surface Panel, track, surface Panel Panel, track, surface Panel, track, surface Sockets, panel mounting adapter, DIN rail Sockets, protective covers, adapters for panel mounting, DIN rail NEMA 4 waterproof cover, soft cover, shock prevention terminal cover Sockets, panel covers in three colors, time setting ring, protective covers, adapters for panel mounting, DIN rail Sockets, panel covers in three colors, time setting ring, protective covers, adapters for panel mounting, DIN rail cULus, cURus, CE UL, CSA, SEV UL, CSA, SEV, CE UL, CSA, SEV, CE, VDE UL, CSA, CE (LV) Features Product type Ranges Mounting Accessories Approvals 48 H x 48 W x 63.7 D (1.89 x 1.89 x 2.51) * NPN/PNP input * Wide AC/DC supply voltage TIMERS, COUNTERS AND PANEL METERS 72 H x 72 W x 100 D (2.83 x 2.83 x 3.94) 48 H x 48 W x 100 D (1.89 x 1.89 x 3.94) 39 IAmsg1-44.indd 39 1/5/07 1:07:56 PM Timers H3DE Dimensions mm (in) 75 H x 22.5 W x 100 D (2.95 x 0.89 x 3.94) Features * Slim analog set timers with field-selectable ranges and multiple operation modes * Built-in DIN rail clamp for easy track mounting Product type Multi-mode TIMERS, COUNTERS AND PANEL METERS Control outputs Time limit - SPDT, 5A, 250 VAC or SPDT x 2 - programmable between time limiting and instantaneous Operation modes ON-delay, Repeat cycle/signal OFF start, Repeat cycle/signal ON start, Signal ON/OFF-delay, Signal OFF-delay, Interval, one shot Ranges 0.1 second to 120 hours Display/indication Power and Output ON LEDs Supply voltage 24- 230 VAC/VDC Mounting Track Accessories DIN rail Approvals UL, CSA, CE H3YN H5S H5L 28 H x 21.5 W x 56.6 D (1.10 x 0.85 x 2.23) 72 H x 72 W x 49 D (2.83 x 2.83 x 1.93) 96 H x 96 W x 56.5 D (3.78 x 3.78 x 2.22) * Subminiature analog solidstate time delay relay * Multiple time ranges and operating modes * Track solder terminal or wirewrap terminal mounting via sockets * Fits MY socket * AM/PM display with 24 program steps and quartz accuracy * ON/OFF, cycle and pulse operations * LCD shows output status and current or next program step * Two independent 15-amp circuits * Manual override of outputs * Simple prompted programming * Fits 1/4 DIN panel cut out ON-delay/Interval/Repeat Cycle Weekly timer Weekly timer Time limit - DPDT, 5A, 250 VAC; 4PDT, 3A, 250 VAC Time limit - SPST x 2, 15A, 250 VAC Time limit - 15A, 125 VAC ON-delay/Interval/Repeat Cycle ON/OFF, repeat cycle, pulse Repeat cycle, individual program for each circuit 0.1 second to 10 minutes or 0.1 minute to 10 hours 1 week 1 minute to 23 hours 59 minutes Power ON LED; Time UP LED LCD; time, day, output status, program step LCD; day, time, program, circuit status 24, 100/120, 200/230 VAC; 50/60 Hz; 12, 24 VDC 100 to 240 VAC, 50/60 Hz 100 to 240 VAC, 50/60 Hz Panel, track, surface Panel, surface, track Panel, track, surface Sockets, panel mounting adapter, DIN rail Protective cover, track adapter, DIN rail Protective cover, DIN rail UL, CSA, CE (LV) UL, CSA UL, CSA, SEV 40 IAmsg1-44.indd 40 1/5/07 1:08:10 PM Counters H7CX Dimensions mm (in) 48 H x 48 W x 100 D (1.89 x 1.89 x 3.94) H7BR H7EC H7ET H7ER 24 H x 48 W x 53.5 D (0.94 x 1.89 x 2.11) 24.0 H x 48 W x 53.5 D (0.94 x 1.89 x 2.11) 24.0 H x 48 W x 53.5 D (0.94 x 1.89 x 2.11) * Multi-function digital counter with backlit LCD display * Single and double preset and range * Batch counter * Contact and transistor outputs available * 7 segment LCD with or without backlight * Large display height 8.6 mm (0.338 in.) * NEMA 4 front * 7 segment LCD with or without backlight * Large display height 8.6 mm (0.338 in.) * NEMA 4 front * 7 segment LCD with or without backlight * Large display height 8.6 mm (0.338 in.) * NEMA 4 front Number of digits 4 or 6 6 8 7 4 or 5 Operation modes UP, DOWN, reversible, tachometer, totalizer, dual-counter, batch, single or dual presets UP, DOWN, reversible UP counting UP counting UP counting No voltage or voltage PNP/NPN DC voltage; AC voltage; No-voltage contact PNP/NPN DC voltage; AC voltage; No-voltage contact PNP/NPN DC voltage; No voltage contact 30 cps, or 1, 5, or 10 Kcps 20 cps (AC/DC voltage); 30 cps/1 Kcps selectable (NPN/PNP DC voltage) 1 sec. 1 Kcps or 10 Kcps; 1 pulse/rev., 60 pulses/ rev., or 600 pulses/rev. 0 to 999,999 for preset models, and -99,999 to 999,999 for 0 to 99,999,999 Selectable between 999,999.9 hrs. and 3,999 days 23.9 hrs.; 999 hrs. 59 min. 59 sec. and 9,999 hrs. 59.9 min. 0 to 1,000 rps; 1,000.0 rpm; 1,000.0 rps; 10,000 rpm Supply voltage 100-240 VAC or 24 VAC / 12 to 24 VDC 100 to 240 VAC, 50/60 Hz or 24 VAC/ 12 to 24 VDC Not required for nonbacklight models; 24 VDC required for backlight models Not required for nonbacklight models; 24 VDC required for backlight models Not required for nonbacklight models; 24 VDC required for backlight models Control output Contact, transistor or both (programmable) Contacts: 3A, 250 VAC; Transistor: Open collector, 100 mA at 30 VDC max. Residual voltage 2 V Max. - - - Screw terminals Screw terminals or wire wrap; 8 solder terminals Screw terminals or wire wrap Screw terminals Mounting Panel, track or surface Flush mount Panel Panel Panel Approvals cULus, cURus, CE UL, CSA, CE UL, CE, CSA, VDE UL, CE, CSA, VDE UL, CSA, CE, VDE Features * Advanced programmable display * PNP/NPN input * Prescaling function * Up/down counting * Programmable via front or dip switches on back * NEMA 4 front Counter input NPN/PNP selectable Count speed 30 cps, 5 Kcps, 10 Kcps (prescale) Ranges 0 to 9999 (4 digits) 0 to 999,999 (6 digits) Connections Screw terminals or 11-pin socket TIMERS, COUNTERS AND PANEL METERS 72 H x 72 W x 100 D (2.83 x 2.83 x 3.94) 41 IAmsg1-44.indd 41 1/5/07 1:08:14 PM Digital Panel Meters K3HB-S Dimension 48 H x 96 W x 95 D (1.89 x 3.78 x 3.74) Features * Advanced inspection controller with high speed response of 2,000 times per second * This is ideal for high-speed measurement with discrimination from 1 or 2 independent analog inputs * Sampling period is measured at 0.5 ms with an output response time of 1 ms max. Product type Linear Sensor Indicator TIMERS, COUNTERS AND PANEL METERS Input type Dual analog inputs: DC current: 0-20 mA, 4-20 mA DC voltage: 0-5 V, 1-5 V, 5 V, 10 V K3HB-X K3HB-H K3HB-V 48 H x 96 W x 95 D (1.89 x 3.78 x 3.74) 48 H x 96 W x 95 D (1.89 x 3.78 x 3.74) 48 H x 96 W x 95 D (1.89 x 3.78 x 3.74) * Intelligent signal processor for AC or DC signal or voltage * Multiple ranges can be covered by a single meter * Programmable via serial communications or front panel * Field replaceable output * High-speed temperature indicator with high accuracy input resolution for both Platinum resistance and Thermocouples * This unit is also equipped with simple input shift using two points, hysteresis, peak/hold value, and more * Ideal weighing indicator for making good/no-good judgments * Could measure pressure, load, torque, and weight by using load cell signal input Process Meter Temperature Meter Weighing Meter DC voltage: 199.99 V, 19,999 V, Thermocouples: K, J, T, E, L, U, 1.9999 V, 1.0000 to 5.0000 V; N, R, S, B, W; AC voltage: 0.0 to 400.0 V, Platinum resistance: Pt100 0.00 to 199.99 V, 0.000 to 19.999 V, 0.0000 to 1.9999 V; DC current: 199.99 mA, 19.999 mA, 1.9999 mA, 4.000 to 20.000 mA; AC current: 0.000 to 10.000 A, 0.0000 to 1.9999 A, 0.00 to 199.99 mA, 0.000 to 19.999 mA DC voltage: 0.00 to 199.99 mV, 0.000 to 19.999 mV, 100.00 mV, 199.99 mV Display 5-digit, 7-segment Negative Transmissive LCD 5-digit, 7-segment Negative Transmissive LCD 5-digit, 7-segment Negative Transmissive LCD 5-digit, 7-segment Negative Transmissive LCD Setting Options Front pushbuttons or Serial communications Front pushbuttons or Serial communications Front pushbuttons or Serial communications Front pushbuttons or Serial communications 5 point NPN; 8 point NPN; 5 point PNP; 8 point PNP 5 point NPN; 8 point NPN; 5 point PNP; 8 point PNP 5 point NPN; 8 point NPN; 5 point PNP; 8 point PNP SPDT and 12 VDC PS; SPDT and 10 VDC PS; 0-20 mA and 12 VDC PS; 0-20 mA and 10 VDC PS 0-5, 0-10 VDC and 12 VDC PS; RS-232C and 12 VDC PS; RS-232C and 10 VDC PS; RS-485 and 12 VDC PS; RS-485 and 10 VDC PS SPDT and 12 VDC PS; SPDT and 10 VDC PS; 0-20 mA and 12 VDC PS; 0-20 mA and 10 VDC PS; 0-5, 0-10 VDC and 12 VDC PS; RS-232C and 12 VDC PS; RS-232C and 10 VDC PS; RS-485 and 12 VDC PS; RS-485 and 10 VDC PS SPDT and 12 VDC PS; SPDT and 10 VDC PS; 0-20 mA and 12 VDC PS; 0-20 mA and 10 VDC PS; 0-5, 0-10 VDC and 12 VDC PS; RS-232C and 12 VDC PS; RS-232C and 10 VDC PS; RS-485 and 12 VDC PS ; RS-485 and 10 VDC PS 12 VDC only or 10 VDC only 12 VDC only or 10 VDC only 12 VDC only or 10 VDC only 2-SPDT; 4-SPST 2-SPDT; 4-SPST 2-SPDT; 4-SPST Transistor 5-NPN; 5-PNP 5-NPN; 5-PNP 5-NPN; 5-PNP 5-NPN; 5-PNP DeviceNet Yes Yes Yes Yes Approvals cULus, CE cULus, CE cULus, CE cULus, CE Event Inputs 5 point NPN; 8 point NPN; 5 point PNP; 8 point PNP Control outputs Combination output boards SPDT and 12 VDC PS; with Power Supply (PS) SPDT and 10 VDC PS; 0-20 mA and 12 VDC PS; 0-20 mA and 10 VDC PS; 0-5, 0-10 VDC and 12 VDC PS; RS-232C and 12 VDC PS; RS-232C and 10 VDC PS; RS-485 and 12 VDC PS; RS-485 and 10 VDC PS Power Supply 12 VDC only or 10 VDC only Relay 2-SPDT; 4-SPST 42 IAmsg1-44.indd 42 1/5/07 1:08:24 PM Digital Panel Meters K3MA-J Dimensions mm (in) 48 H x 96 W x 97 D (1.89 x 3.78 x 3.81) K3MA-L K3MA-F 48 H x 96 W x 97 D (1.89 x 3.78 x 3.81) * Wide input range * 2 types of platinum-resistance thermometers and 10 types of thermocouples * Front-panel key operation * Water and dust-proof NEMA 4X front panel * 2-color LEDs * Temperature input shift and temperature unit selection functions * Short 80 mm depth front panel * Wide input range: contact, NPN, PNP, or voltage pulse * Front-panel key operation * Scaling, auto-zero time, startup compensation time functions * Short 80 mm depth front panel * Water and dust-proof NEMA 4X front panel * 2-color LEDs Temperature meter Frequency/rate meter Thermocouple: K, J, T, E, L, U, N R, S, B RTD: Pt100, JPt100 Rotary pulse 7-segment LCD backlit, red and green LEDs 7-segment LCD backlit, red and green LEDs Front-panel key Front-panel key 1 SPDT 2 SPST-NO Transistor N/A N/A N/A BDC N/A N/A N/A Linear N/A N/A N/A Alarm N/A N/A N/A Serial communications N/A outputs N/A N/A PC software N/A N/A N/A cULus, CE cULus, CE Features * Multi-range DC voltage/current input * Front-panel key operation * Scaling, front-panel forced-zero, zero-limit functions * Short 80 mm depth front panel * Water and dust-proof NEMA 4X front panel * 2-color LEDs Product type Process meter Input type DC voltage: 1.000 to 3.000 V, 0.000 to 5.000 V, -5.000 to 5.000 V, -10.000 to 10.00 V; DC current: 4.00 to 20.00 mA, 0.00 to 20.00 mA Display 7-segment LCD backlit, red and green LEDs Setting options Front-panel key Control outputs Relay 2 SPST-NO Approvals cULus, CE TIMERS, COUNTERS AND PANEL METERS 48 H x 96 W x 97 D (1.89 x 3.78 x 3.81) 43 IAmsg1-44.indd 43 1/5/07 1:08:32 PM