Note 1: Leading pin (pregrounded)
4
H SERIES AC/DC
ENVIRONMENTAL SPECIFICATIONS
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Altitude Operating. 10k ASL Ft.
Non-Operating. 40k ASL Ft.
Temperature- Operating Operating ambient temperature. -10 50 °C
Operating case temperature. -10 80
Temperature- Storage -25 100 °C
Temperature Coefficient 0°C to 70°C (after 15 minute warm-up). 5V single and triple output model ±1.0
12V single and dual output models ±2.4
15V single and dual output models ±3.0 mV/°C
24V single output model ±4.8
48V single output model ±9.6
Relative Humidity Non-Condensing. 5 93 %RH
Shock Per EN60068-2-27, MIL-STD-810D section 516.3. 15 G
Vibration Per EN60068-2-6, MIL-STD-810D section 514.3. 2 GRMS
MTBF Calculated, MIL-HDBK-217F, 40°C, ground benign, single output models. 384,000
Calculated, MIL-HDBK-217F, 40°C, ground benign, dual output models. 306,000 Hours
Calculated, MIL-HDBK-217F, 40°C, ground benign, triple output models 270,000
Unit Weight 27.1/770 oz/gm
OPTIONS
DESCRIPTION OPTION NOTES
Undervoltage Monitor -D1 thru -D8 Input and/or V1 output monitoring circuitry. The input and/or output undervoltage monitoring circuit operates
independently of the built-in input undervoltage lock-out circuit. A logic "low" (JFET output) or "high" signal
(NPN output) is generated at pin 5 as soon as one of the monitored voltages drops below the preselected
threshold level. Consult factory for specific types. Not compatible with -V options.
ACFAIL Signal (VME) -V2 This option defines an undervoltage monitoring circuit for the input voltage. Equivalent to -D option and
generates an ACFAIL signal (V signal) which conforms to the VME standard. Not compatible with -D option.
-V3 This option defines an undervoltage monitoring circuit for the input and main output voltage. Equivalent to
–D option and generates an ACFAIL signal (V signal) which conforms to the VME standard.
Not compatible with -D option.
Front Panel for 19” Rack Order HZZ00802 front panel for 19" rack mounting on Schroff systems.
Chassis Mounting Plate Order HZZ01215 for chassis mounting plates. Designed for mounting the 19" cassette to a chassis/wall where
only frontal access is given.
DIN Rail Bracket Order HZZ01210 universal mounting bracket for DIN-rail or chassis mounting.
Mating Connectors Order as follows for mating H11 connectors:
HZZ00101: Faston, straight, 0.250” x 0.030” (6.3 x 0.8 mm)
HZZ00102: Screw terminals, 90°, #13 AWG (2.5 mm2) max
HZZ00103 Solder pin 0.200” (5.2 mm), Ø 0.063” (1.6 mm)
Pin Single Output Dual Output Triple Output
2 Inhibit Control Inhibit Control Inhibit Control
5 -D or -V Option -D or -V Option -D or -V Option
8 +V1 +V3
11 -V1 -V3
14 +Voltage Adjust +V2 +V2
17 -Voltage Adjust -V2 -V2
20 +V1 +V1 +V1
23 -V1 -V1 -V1
26 GND (note1) GND (note1) GND (note1)
29 Neutral Neutral Neutral
32 Line Line Line