RoHS Compliant Digital Attenuator, 1-Bit, 10 dB Step DC - 2.0 GHz Features * * * * * * * MAATSS0018 V2 Functional Block Diagram Single 10 dB Step Low Loss: 0.3 dB @ 900 MHz Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of AT-266 Description M/A-COM's MAATSS0018 is a 1 bit, 10 dB step GaAs MMIC digital attenuator in a lead-free SOT-25 surface mount plastic package. The MAATSS0018 is ideally suited for use where high accuracy, very low power consumption and low intermodulation products are required. Typical applications include radio, wireless LANs, GPS equipment and other gain/level control circuits. Pin Configuration Pin No. Function Description 1 RF1 RF In/Out 2 GND RF Ground 3 RF2 RF In/Out 4 V1 Control Voltage 5 V2 Control Voltage V1 V2 Attenuation State 0 1 10 dB 1 0 Insertion Loss The MAATSS0018 is a GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Ordering Information Part Number Package MAATSS0018 Bulk Packaging MAATSS0018TR 1000 piece reel Truth Table 3,4,5 Note: Reference Application Note M513 for reel size information. Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power 50 MHz 500 - 2000 MHz +27 dBm +34 dBm Control Voltage -8.5 V < Vc < +8 V Operating Temperature -40C to +85C Storing Temperature -65C to +150C 3. For positive voltage control, external DC blocking capacitors are required on all RF ports (pins 1, 2 and 3) 4. Differential voltage, V(state 1) - V(state 0), must be +2.8 V minimum and less than 8 V. 5. 0 = -8 V to 0.2 V, 1 = -0.2 V to 8 V 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Digital Attenuator, 1-Bit, 10 dB Step DC - 2.0 GHz MAATSS0018 V2 Electrical Specifications: TA = 25C, VC = 0 V / -3 V, Z0 = 50 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 0 - 1 GHz 1 - 2 GHz dB dB -- -- 0.3 0.5 0.45 0.7 Attenuation DC - 2 GHz dB 9.5 10 10.5 VSWR 0 - 2 GHz Ratio -- 1.4:1 -- IP3 2 Tone @ 0 dBm, 5 MHz spacing dBm -- 50 -- P1dB 1 GHz dBm -- 28 -- Trise, Tfall 10% to 90% RF, 90% to 10% RF nS -- 5 -- Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS -- 10 -- Transients In Band mV -- 6 -- Control Current Vc = 3 V A -- 25 -- Lead-Free SOT-25 Reference Application Note M538 for lead-free solder reflow recommendations. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Digital Attenuator, 1-Bit, 10 dB Step DC - 2.0 GHz MAATSS0018 V2 Typical Performance Curves (39 pF capacitors used for positive voltage control) Insertion Loss (Negative Control) Insertion Loss (Positive Control) 1.0 1.0 +25C -40C +85C 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 0.0 0.5 1.0 +25C -40C +85C 0.8 1.5 2.0 2.5 3.0 0.0 0.0 0.5 11.0 2.5 3.0 +25C -40C +85C +25C -40C +85C 10.5 10.0 9.5 9.5 0.5 1.0 1.5 2.0 2.5 3.0 9.0 0.0 0.5 Frequency (GHz) 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Return Loss (Reference State) Return Loss (10 dB State) 40 40 Positive Control Negative Control Positive Control Negative Control 30 30 20 20 10 10 0 0.0 2.0 11.0 10.0 9.0 0.0 1.5 Relative Attenuation (Negative Control) Relative Attenuation (Positive Control) 10.5 1.0 Frequency (GHz) Frequency (GHz) 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.